Passing the PT0-003 65503 .*
E. _65503_
F. _65503$
Answer: D
Explanation:
http://www.cisco.com/c/en/us/td/docs/ios/12_2/termserv/configuration/guide/ftersv_c/tcfaap re.html
NEW QUESTION: 3
An engineer has integrated a new DMVPN to link remote offices across the internet using Cisco IOS routers. When connecting to remote sites, pings and voice data appear to flow properly and all tunnel stats seem to show that are up. However, when trying to connect to a remote server using RDP, the connection fails. Which action resolves this issue?
A. Adjust the MTU size within the routers.
B. Replace certificate on the RDP server.
C. Add RDP port to the extended ACL.
D. Change DMVPN timeout values.
Answer: B
NEW QUESTION: 4
You manage a cloud service that has a web application named WebRole1.
WebRole1 writes error messages to the Windows Event Log.
Users report receiving an error page with the following message: "Event 26 has occurred.
Contact your system administrator."
You need to access the WebRole1 event log.
Which three actions should you perform? Each correct answer presents part of the solution.
A. Run the Enable-AzureWebsiteApplicationDiagnostic PowerShell cmdlet.
B. Update the WebRole1 web.config file.
C. Run the Set-AzureVMDiagnosticsExtensionPowerShell cmdlet.
D. Create a storage account.
E. Update the cloud service definition file and the service configuration file.
F. Enable verbose monitoring.
Answer: D,E,F
Explanation:
step 1 specify the scheduled TransferLogLevelFilter to Verbose in the diagnostics.wadcfg step 2 Update the cloud service definition file and the service configuration file (.cspkg) step 3 best practice is to create a separate storage account for logging diagnostics data
References: http://azure.microsoft.com/en-us/documentation/articles/cloud-services-how-to-monitor/
E. _65503_
F. _65503$
Answer: D
Explanation:
http://www.cisco.com/c/en/us/td/docs/ios/12_2/termserv/configuration/guide/ftersv_c/tcfaap re.html
NEW QUESTION: 3
An engineer has integrated a new DMVPN to link remote offices across the internet using Cisco IOS routers. When connecting to remote sites, pings and voice data appear to flow properly and all tunnel stats seem to show that are up. However, when trying to connect to a remote server using RDP, the connection fails. Which action resolves this issue?
A. Adjust the MTU size within the routers.
B. Replace certificate on the RDP server.
C. Add RDP port to the extended ACL.
D. Change DMVPN timeout values.
Answer: B
NEW QUESTION: 4
You manage a cloud service that has a web application named WebRole1.
WebRole1 writes error messages to the Windows Event Log.
Users report receiving an error page with the following message: "Event 26 has occurred.
Contact your system administrator."
You need to access the WebRole1 event log.
Which three actions should you perform? Each correct answer presents part of the solution.
A. Run the Enable-AzureWebsiteApplicationDiagnostic PowerShell cmdlet.
B. Update the WebRole1 web.config file.
C. Run the Set-AzureVMDiagnosticsExtensionPowerShell cmdlet.
D. Create a storage account.
E. Update the cloud service definition file and the service configuration file.
F. Enable verbose monitoring.
Answer: D,E,F
Explanation:
step 1 specify the scheduled TransferLogLevelFilter to Verbose in the diagnostics.wadcfg step 2 Update the cloud service definition file and the service configuration file (.cspkg) step 3 best practice is to create a separate storage account for logging diagnostics data
References: http://azure.microsoft.com/en-us/documentation/articles/cloud-services-how-to-monitor/
E. _65503_
F. _65503$
Answer: D
Explanation:
http://www.cisco.com/c/en/us/td/docs/ios/12_2/termserv/configuration/guide/ftersv_c/tcfaap re.html
NEW QUESTION: 3
An engineer has integrated a new DMVPN to link remote offices across the internet using Cisco IOS routers. When connecting to remote sites, pings and voice data appear to flow properly and all tunnel stats seem to show that are up. However, when trying to connect to a remote server using RDP, the connection fails. Which action resolves this issue?
A. Adjust the MTU size within the routers.
B. Replace certificate on the RDP server.
C. Add RDP port to the extended ACL.
D. Change DMVPN timeout values.
Answer: B
NEW QUESTION: 4
You manage a cloud service that has a web application named WebRole1.
WebRole1 writes error messages to the Windows Event Log.
Users report receiving an error page with the following message: "Event 26 has occurred.
Contact your system administrator."
You need to access the WebRole1 event log.
Which three actions should you perform? Each correct answer presents part of the solution.
A. Run the Enable-AzureWebsiteApplicationDiagnostic PowerShell cmdlet.
B. Update the WebRole1 web.config file.
C. Run the Set-AzureVMDiagnosticsExtensionPowerShell cmdlet.
D. Create a storage account.
E. Update the cloud service definition file and the service configuration file.
F. Enable verbose monitoring.
Answer: D,E,F
Explanation:
step 1 specify the scheduled TransferLogLevelFilter to Verbose in the diagnostics.wadcfg step 2 Update the cloud service definition file and the service configuration file (.cspkg) step 3 best practice is to create a separate storage account for logging diagnostics data
References: http://azure.microsoft.com/en-us/documentation/articles/cloud-services-how-to-monitor/
This is more than a PT0-003 65503 .*
E. _65503_
F. _65503$
Answer: D
Explanation:
http://www.cisco.com/c/en/us/td/docs/ios/12_2/termserv/configuration/guide/ftersv_c/tcfaap re.html
NEW QUESTION: 3
An engineer has integrated a new DMVPN to link remote offices across the internet using Cisco IOS routers. When connecting to remote sites, pings and voice data appear to flow properly and all tunnel stats seem to show that are up. However, when trying to connect to a remote server using RDP, the connection fails. Which action resolves this issue?
A. Adjust the MTU size within the routers.
B. Replace certificate on the RDP server.
C. Add RDP port to the extended ACL.
D. Change DMVPN timeout values.
Answer: B
NEW QUESTION: 4
You manage a cloud service that has a web application named WebRole1.
WebRole1 writes error messages to the Windows Event Log.
Users report receiving an error page with the following message: "Event 26 has occurred.
Contact your system administrator."
You need to access the WebRole1 event log.
Which three actions should you perform? Each correct answer presents part of the solution.
A. Run the Enable-AzureWebsiteApplicationDiagnostic PowerShell cmdlet.
B. Update the WebRole1 web.config file.
C. Run the Set-AzureVMDiagnosticsExtensionPowerShell cmdlet.
D. Create a storage account.
E. Update the cloud service definition file and the service configuration file.
F. Enable verbose monitoring.
Answer: D,E,F
Explanation:
step 1 specify the scheduled TransferLogLevelFilter to Verbose in the diagnostics.wadcfg step 2 Update the cloud service definition file and the service configuration file (.cspkg) step 3 best practice is to create a separate storage account for logging diagnostics data
References: http://azure.microsoft.com/en-us/documentation/articles/cloud-services-how-to-monitor/
- 350-701 Testing Engine
- RhMSUS Probesfragen
- 302 PDF Testsoftware
- Sharing-and-Visibility-Architect Trainingsunterlagen
- PCNSC Trainingsunterlagen
- C_C4H225_12 Zertifikatsdemo
- H19-436_V1.0 Prüfungsinformationen
- AZ-900-Deutsch Deutsch Prüfung
- VERISME Zertifizierungsprüfung
- H13-624_V5.5 Zertifizierungsfragen
- Principles-of-Management Deutsch
- PDP9 Übungsmaterialien
- SK0-005 Quizfragen Und Antworten
- C_THR95_2405 Online Prüfung
- F1 Examengine
- C-IEE2E-2404 Exam Fragen
- C_TFG61_2211 Vorbereitung
- OmniStudio-Developer Prüfungsaufgaben
- C_THR82_2405 Deutsch
- CWSP-207 Fragenkatalog
- OMG-OCUP2-FOUND100 Schulungsunterlagen
E. _65503_
F. _65503$
Answer: D
Explanation:
http://www.cisco.com/c/en/us/td/docs/ios/12_2/termserv/configuration/guide/ftersv_c/tcfaap re.html
NEW QUESTION: 3
An engineer has integrated a new DMVPN to link remote offices across the internet using Cisco IOS routers. When connecting to remote sites, pings and voice data appear to flow properly and all tunnel stats seem to show that are up. However, when trying to connect to a remote server using RDP, the connection fails. Which action resolves this issue?
A. Adjust the MTU size within the routers.
B. Replace certificate on the RDP server.
C. Add RDP port to the extended ACL.
D. Change DMVPN timeout values.
Answer: B
NEW QUESTION: 4
You manage a cloud service that has a web application named WebRole1.
WebRole1 writes error messages to the Windows Event Log.
Users report receiving an error page with the following message: "Event 26 has occurred.
Contact your system administrator."
You need to access the WebRole1 event log.
Which three actions should you perform? Each correct answer presents part of the solution.
A. Run the Enable-AzureWebsiteApplicationDiagnostic PowerShell cmdlet.
B. Update the WebRole1 web.config file.
C. Run the Set-AzureVMDiagnosticsExtensionPowerShell cmdlet.
D. Create a storage account.
E. Update the cloud service definition file and the service configuration file.
F. Enable verbose monitoring.
Answer: D,E,F
Explanation:
step 1 specify the scheduled TransferLogLevelFilter to Verbose in the diagnostics.wadcfg step 2 Update the cloud service definition file and the service configuration file (.cspkg) step 3 best practice is to create a separate storage account for logging diagnostics data
References: http://azure.microsoft.com/en-us/documentation/articles/cloud-services-how-to-monitor/
E. _65503_
F. _65503$
Answer: D
Explanation:
http://www.cisco.com/c/en/us/td/docs/ios/12_2/termserv/configuration/guide/ftersv_c/tcfaap re.html
NEW QUESTION: 3
An engineer has integrated a new DMVPN to link remote offices across the internet using Cisco IOS routers. When connecting to remote sites, pings and voice data appear to flow properly and all tunnel stats seem to show that are up. However, when trying to connect to a remote server using RDP, the connection fails. Which action resolves this issue?
A. Adjust the MTU size within the routers.
B. Replace certificate on the RDP server.
C. Add RDP port to the extended ACL.
D. Change DMVPN timeout values.
Answer: B
NEW QUESTION: 4
You manage a cloud service that has a web application named WebRole1.
WebRole1 writes error messages to the Windows Event Log.
Users report receiving an error page with the following message: "Event 26 has occurred.
Contact your system administrator."
You need to access the WebRole1 event log.
Which three actions should you perform? Each correct answer presents part of the solution.
A. Run the Enable-AzureWebsiteApplicationDiagnostic PowerShell cmdlet.
B. Update the WebRole1 web.config file.
C. Run the Set-AzureVMDiagnosticsExtensionPowerShell cmdlet.
D. Create a storage account.
E. Update the cloud service definition file and the service configuration file.
F. Enable verbose monitoring.
Answer: D,E,F
Explanation:
step 1 specify the scheduled TransferLogLevelFilter to Verbose in the diagnostics.wadcfg step 2 Update the cloud service definition file and the service configuration file (.cspkg) step 3 best practice is to create a separate storage account for logging diagnostics data
References: http://azure.microsoft.com/en-us/documentation/articles/cloud-services-how-to-monitor/
Ce-Isareti PT0-003 Demotesten ist eine Website, die Schulungsunterlagen zur IT-Zertifizierungsprüfung bietet, CompTIA PT0-003 Prüfungsvorbereitung Man muss mindestens einmal erleben, auf die anscheinend begabt Leute, die die schwierigen Kenntnisse in sagenhaft kurzer Zeit beherrschen können, neidisch zu sein, Ce-Isareti hat die CompTIA PT0-003 Prüfung schon mehrere Jahre geforscht.
In welcher seltsamen Vereinfachung und Fälschung lebt der https://pruefung.examfragen.de/PT0-003-pruefung-fragen.html Mensch, Im Jahr darauf bekam sie einen Sohn, einen wunderschönen kleinen Jungen mit Grübchen und schwarzen Locken.
Anstelle von Entseibstung können wir auch C_WZADM_2404 Demotesten wie folgt bezeichnet werden: Stehen Sie sich selbst als Kommandant, mit anderenWorten als eine Person ohne Macht, Sie stand PT0-003 Prüfungsvorbereitung am Rande des Anlegers im Nebel, blass, zitternd und mit Gänsehaut überzogen.
Dezember Tokieda I, Einundzwanzig zweiundzwanzig Oh, haben wir Hochwasser, C-TS414-2023 Zertifikatsdemo Die Tulpen und Feuerlilien, das sind Matronen, die passen auf, daß recht schön getanzt wird und alles fein ordentlich hergeht.
So viel können wir von unseren Freunden wohl verlangen, Er SSCP Online Praxisprüfung sah aus, als würde er gleich wieder weinen, Die Welt ist das Reich des Lichts, und sie gibt und macht für alles Sinn.
Aktuelle CompTIA PT0-003 Prüfung pdf Torrent für PT0-003 Examen Erfolg prep
Ich möchte keine weiteren Neffen, ist das klar, Er sieht gut aus, PT0-003 Testfagen er fliegt davon Professor Trelawney seufzte, Ich merkte selbst, dass es steif klang, wie ein schlecht gelernter Text.
Da ist noch einer im Schrank sagte Hagrid, Erhebt die PT0-003 Lernhilfe Seel erst aufwärts ihr Gefieder, Dann liebt sie mehr, je mehr zu lieben ist, Denn eine strahlt denGlanz der andern wieder- Und gnügt mein Wort dir nicht, PT0-003 Prüfungsvorbereitung in kurzer Frist Wird dort von dir Beatrix aufgefunden, Durch welche du dann ganz befriedigt bist.
Er sah mich misstrauisch an, als ich aus dem Bett stieg und auf https://onlinetests.zertpruefung.de/PT0-003_exam.html der Suche nach meinen Schuhen in dem dunklen Zimmer herumtastete, Doch sosehr ich ihn anstarrte ich kam nicht drauf.
Auffallend zu ahnden beschlossen hat, Im Hof traf Victarion HPE6-A73 Deutsche Prüfungsfragen den alten Drumm und Gorold Guthbruder, die sich leise mit Rodrik Harlau unterhielten, Verstanden sagte Harry knapp.
Es wird ohne mir ach gehn, Es gibt Männer, die sich noch daran PT0-003 Prüfungsvorbereitung erinnern, wie du ein kleines Mädchen warst, das nackt im Meer geschwommen ist und mit seiner Puppe gespielt hat.
Setzen Sie sich, Potter, Einen Moment lang hörte sie sich jünger an als PT0-003 Prüfungsvorbereitung Myrcella, Dieser, von der Haltung und dem Aussehen des Jünglings überrascht, stand still und sagte ganz laut: Mein Gott, wie gleicht er ihm!
PT0-003 Test Dumps, PT0-003 VCE Engine Ausbildung, PT0-003 aktuelle Prüfung
Im kalten silbrig blauen Licht der Schwerter PT0-003 Prüfungsvorbereitung wirkte sie bleich und grimmig, Dies ist ein intelligenter Weg dieses Wissens, der selbst durch den Gedanken des Objekts begrenzt ist, PT0-003 Prüfungsvorbereitung intern das angeborene Wissen Kategorie) darüber, wie alle Objekte konstruiert sind.
Du bist die Einzige, die Garin retten kann, Ich war albern und PT0-003 Deutsch oberflächlich, aber ich war zufrieden, Ja sagte Cho, unserem auch nicht, Stets wacher Schlaf, dein eignes Widerspiel!
Ja, ja, verfolgen.
NEW QUESTION: 1
Which three are advantages of the Java exception mechanism?
A. Improves the program structure because exceptions must be handled in the method in which they occurred
B. Allows the creation of new exceptions that are tailored to the particular program being created
C. Improves the program structure because the programmer can choose where to handle exceptions
D. Improves the program structure because the error handling code is separated from the normal program function
E. Provides a set of standard exceptions that covers all the possible errors
Answer: B,C,D
Explanation:
B is false. Standard exceptions not cover all possible errors. D is false. Exceptions don't have to be handled in the method in which they occurred.
NEW QUESTION: 2
Which as-path access-list regular expression should be applied on R2 as a neighbor filter list to only allow updates with an origin of AS 65503?
Refer to the exhibit.
A. 0
B. _65503.?$
C.
What will you get with your purchase of the Unlimited Access Package for only $149.00?
- An overview of the PT0-003 65503 .*
E. _65503_
F. _65503$
Answer: D
Explanation:
http://www.cisco.com/c/en/us/td/docs/ios/12_2/termserv/configuration/guide/ftersv_c/tcfaap re.htmlNEW QUESTION: 3
An engineer has integrated a new DMVPN to link remote offices across the internet using Cisco IOS routers. When connecting to remote sites, pings and voice data appear to flow properly and all tunnel stats seem to show that are up. However, when trying to connect to a remote server using RDP, the connection fails. Which action resolves this issue?
A. Adjust the MTU size within the routers.
B. Replace certificate on the RDP server.
C. Add RDP port to the extended ACL.
D. Change DMVPN timeout values.
Answer: BNEW QUESTION: 4
course through studying the questions and answers.
You manage a cloud service that has a web application named WebRole1.
WebRole1 writes error messages to the Windows Event Log.
Users report receiving an error page with the following message: "Event 26 has occurred.
Contact your system administrator."
You need to access the WebRole1 event log.
Which three actions should you perform? Each correct answer presents part of the solution.
A. Run the Enable-AzureWebsiteApplicationDiagnostic PowerShell cmdlet.
B. Update the WebRole1 web.config file.
C. Run the Set-AzureVMDiagnosticsExtensionPowerShell cmdlet.
D. Create a storage account.
E. Update the cloud service definition file and the service configuration file.
F. Enable verbose monitoring.
Answer: D,E,F
Explanation:
step 1 specify the scheduled TransferLogLevelFilter to Verbose in the diagnostics.wadcfg step 2 Update the cloud service definition file and the service configuration file (.cspkg) step 3 best practice is to create a separate storage account for logging diagnostics data
References: http://azure.microsoft.com/en-us/documentation/articles/cloud-services-how-to-monitor/ - A preview of actual PT0-003 65503 .*
E. _65503_
F. _65503$
Answer: D
Explanation:
http://www.cisco.com/c/en/us/td/docs/ios/12_2/termserv/configuration/guide/ftersv_c/tcfaap re.htmlNEW QUESTION: 3
An engineer has integrated a new DMVPN to link remote offices across the internet using Cisco IOS routers. When connecting to remote sites, pings and voice data appear to flow properly and all tunnel stats seem to show that are up. However, when trying to connect to a remote server using RDP, the connection fails. Which action resolves this issue?
A. Adjust the MTU size within the routers.
B. Replace certificate on the RDP server.
C. Add RDP port to the extended ACL.
D. Change DMVPN timeout values.
Answer: BNEW QUESTION: 4
test questions
You manage a cloud service that has a web application named WebRole1.
WebRole1 writes error messages to the Windows Event Log.
Users report receiving an error page with the following message: "Event 26 has occurred.
Contact your system administrator."
You need to access the WebRole1 event log.
Which three actions should you perform? Each correct answer presents part of the solution.
A. Run the Enable-AzureWebsiteApplicationDiagnostic PowerShell cmdlet.
B. Update the WebRole1 web.config file.
C. Run the Set-AzureVMDiagnosticsExtensionPowerShell cmdlet.
D. Create a storage account.
E. Update the cloud service definition file and the service configuration file.
F. Enable verbose monitoring.
Answer: D,E,F
Explanation:
step 1 specify the scheduled TransferLogLevelFilter to Verbose in the diagnostics.wadcfg step 2 Update the cloud service definition file and the service configuration file (.cspkg) step 3 best practice is to create a separate storage account for logging diagnostics data
References: http://azure.microsoft.com/en-us/documentation/articles/cloud-services-how-to-monitor/ - Actual correct PT0-003 65503 .*
E. _65503_
F. _65503$
Answer: D
Explanation:
http://www.cisco.com/c/en/us/td/docs/ios/12_2/termserv/configuration/guide/ftersv_c/tcfaap re.htmlNEW QUESTION: 3
An engineer has integrated a new DMVPN to link remote offices across the internet using Cisco IOS routers. When connecting to remote sites, pings and voice data appear to flow properly and all tunnel stats seem to show that are up. However, when trying to connect to a remote server using RDP, the connection fails. Which action resolves this issue?
A. Adjust the MTU size within the routers.
B. Replace certificate on the RDP server.
C. Add RDP port to the extended ACL.
D. Change DMVPN timeout values.
Answer: BNEW QUESTION: 4
answers to the latest 65503 .*
You manage a cloud service that has a web application named WebRole1.
WebRole1 writes error messages to the Windows Event Log.
Users report receiving an error page with the following message: "Event 26 has occurred.
Contact your system administrator."
You need to access the WebRole1 event log.
Which three actions should you perform? Each correct answer presents part of the solution.
A. Run the Enable-AzureWebsiteApplicationDiagnostic PowerShell cmdlet.
B. Update the WebRole1 web.config file.
C. Run the Set-AzureVMDiagnosticsExtensionPowerShell cmdlet.
D. Create a storage account.
E. Update the cloud service definition file and the service configuration file.
F. Enable verbose monitoring.
Answer: D,E,F
Explanation:
step 1 specify the scheduled TransferLogLevelFilter to Verbose in the diagnostics.wadcfg step 2 Update the cloud service definition file and the service configuration file (.cspkg) step 3 best practice is to create a separate storage account for logging diagnostics data
References: http://azure.microsoft.com/en-us/documentation/articles/cloud-services-how-to-monitor/
E. _65503_
F. _65503$
Answer: D
Explanation:
http://www.cisco.com/c/en/us/td/docs/ios/12_2/termserv/configuration/guide/ftersv_c/tcfaap re.htmlNEW QUESTION: 3
An engineer has integrated a new DMVPN to link remote offices across the internet using Cisco IOS routers. When connecting to remote sites, pings and voice data appear to flow properly and all tunnel stats seem to show that are up. However, when trying to connect to a remote server using RDP, the connection fails. Which action resolves this issue?
A. Adjust the MTU size within the routers.
B. Replace certificate on the RDP server.
C. Add RDP port to the extended ACL.
D. Change DMVPN timeout values.
Answer: BNEW QUESTION: 4
questions
You manage a cloud service that has a web application named WebRole1.
WebRole1 writes error messages to the Windows Event Log.
Users report receiving an error page with the following message: "Event 26 has occurred.
Contact your system administrator."
You need to access the WebRole1 event log.
Which three actions should you perform? Each correct answer presents part of the solution.
A. Run the Enable-AzureWebsiteApplicationDiagnostic PowerShell cmdlet.
B. Update the WebRole1 web.config file.
C. Run the Set-AzureVMDiagnosticsExtensionPowerShell cmdlet.
D. Create a storage account.
E. Update the cloud service definition file and the service configuration file.
F. Enable verbose monitoring.
Answer: D,E,F
Explanation:
step 1 specify the scheduled TransferLogLevelFilter to Verbose in the diagnostics.wadcfg step 2 Update the cloud service definition file and the service configuration file (.cspkg) step 3 best practice is to create a separate storage account for logging diagnostics data
References: http://azure.microsoft.com/en-us/documentation/articles/cloud-services-how-to-monitor/
Our Unlimited Access Package will prepare you for your exam with guaranteed results, surpassing other PT0-003 65503 .*
E. _65503_
F. _65503$
Answer: D
Explanation:
http://www.cisco.com/c/en/us/td/docs/ios/12_2/termserv/configuration/guide/ftersv_c/tcfaap re.html
NEW QUESTION: 3
An engineer has integrated a new DMVPN to link remote offices across the internet using Cisco IOS routers. When connecting to remote sites, pings and voice data appear to flow properly and all tunnel stats seem to show that are up. However, when trying to connect to a remote server using RDP, the connection fails. Which action resolves this issue?
A. Adjust the MTU size within the routers.
B. Replace certificate on the RDP server.
C. Add RDP port to the extended ACL.
D. Change DMVPN timeout values.
Answer: B
NEW QUESTION: 4
You manage a cloud service that has a web application named WebRole1.
WebRole1 writes error messages to the Windows Event Log.
Users report receiving an error page with the following message: "Event 26 has occurred.
Contact your system administrator."
You need to access the WebRole1 event log.
Which three actions should you perform? Each correct answer presents part of the solution.
A. Run the Enable-AzureWebsiteApplicationDiagnostic PowerShell cmdlet.
B. Update the WebRole1 web.config file.
C. Run the Set-AzureVMDiagnosticsExtensionPowerShell cmdlet.
D. Create a storage account.
E. Update the cloud service definition file and the service configuration file.
F. Enable verbose monitoring.
Answer: D,E,F
Explanation:
step 1 specify the scheduled TransferLogLevelFilter to Verbose in the diagnostics.wadcfg step 2 Update the cloud service definition file and the service configuration file (.cspkg) step 3 best practice is to create a separate storage account for logging diagnostics data
References: http://azure.microsoft.com/en-us/documentation/articles/cloud-services-how-to-monitor/
E. _65503_
F. _65503$
Answer: D
Explanation:
http://www.cisco.com/c/en/us/td/docs/ios/12_2/termserv/configuration/guide/ftersv_c/tcfaap re.html
NEW QUESTION: 3
An engineer has integrated a new DMVPN to link remote offices across the internet using Cisco IOS routers. When connecting to remote sites, pings and voice data appear to flow properly and all tunnel stats seem to show that are up. However, when trying to connect to a remote server using RDP, the connection fails. Which action resolves this issue?
A. Adjust the MTU size within the routers.
B. Replace certificate on the RDP server.
C. Add RDP port to the extended ACL.
D. Change DMVPN timeout values.
Answer: B
NEW QUESTION: 4
You manage a cloud service that has a web application named WebRole1.
WebRole1 writes error messages to the Windows Event Log.
Users report receiving an error page with the following message: "Event 26 has occurred.
Contact your system administrator."
You need to access the WebRole1 event log.
Which three actions should you perform? Each correct answer presents part of the solution.
A. Run the Enable-AzureWebsiteApplicationDiagnostic PowerShell cmdlet.
B. Update the WebRole1 web.config file.
C. Run the Set-AzureVMDiagnosticsExtensionPowerShell cmdlet.
D. Create a storage account.
E. Update the cloud service definition file and the service configuration file.
F. Enable verbose monitoring.
Answer: D,E,F
Explanation:
step 1 specify the scheduled TransferLogLevelFilter to Verbose in the diagnostics.wadcfg step 2 Update the cloud service definition file and the service configuration file (.cspkg) step 3 best practice is to create a separate storage account for logging diagnostics data
References: http://azure.microsoft.com/en-us/documentation/articles/cloud-services-how-to-monitor/
E. _65503_
F. _65503$
Answer: D
Explanation:
http://www.cisco.com/c/en/us/td/docs/ios/12_2/termserv/configuration/guide/ftersv_c/tcfaap re.html
NEW QUESTION: 3
An engineer has integrated a new DMVPN to link remote offices across the internet using Cisco IOS routers. When connecting to remote sites, pings and voice data appear to flow properly and all tunnel stats seem to show that are up. However, when trying to connect to a remote server using RDP, the connection fails. Which action resolves this issue?
A. Adjust the MTU size within the routers.
B. Replace certificate on the RDP server.
C. Add RDP port to the extended ACL.
D. Change DMVPN timeout values.
Answer: B
NEW QUESTION: 4
You manage a cloud service that has a web application named WebRole1.
WebRole1 writes error messages to the Windows Event Log.
Users report receiving an error page with the following message: "Event 26 has occurred.
Contact your system administrator."
You need to access the WebRole1 event log.
Which three actions should you perform? Each correct answer presents part of the solution.
A. Run the Enable-AzureWebsiteApplicationDiagnostic PowerShell cmdlet.
B. Update the WebRole1 web.config file.
C. Run the Set-AzureVMDiagnosticsExtensionPowerShell cmdlet.
D. Create a storage account.
E. Update the cloud service definition file and the service configuration file.
F. Enable verbose monitoring.
Answer: D,E,F
Explanation:
step 1 specify the scheduled TransferLogLevelFilter to Verbose in the diagnostics.wadcfg step 2 Update the cloud service definition file and the service configuration file (.cspkg) step 3 best practice is to create a separate storage account for logging diagnostics data
References: http://azure.microsoft.com/en-us/documentation/articles/cloud-services-how-to-monitor/
E. _65503_
F. _65503$
Answer: D
Explanation:
http://www.cisco.com/c/en/us/td/docs/ios/12_2/termserv/configuration/guide/ftersv_c/tcfaap re.html
NEW QUESTION: 3
An engineer has integrated a new DMVPN to link remote offices across the internet using Cisco IOS routers. When connecting to remote sites, pings and voice data appear to flow properly and all tunnel stats seem to show that are up. However, when trying to connect to a remote server using RDP, the connection fails. Which action resolves this issue?
A. Adjust the MTU size within the routers.
B. Replace certificate on the RDP server.
C. Add RDP port to the extended ACL.
D. Change DMVPN timeout values.
Answer: B
NEW QUESTION: 4
You manage a cloud service that has a web application named WebRole1.
WebRole1 writes error messages to the Windows Event Log.
Users report receiving an error page with the following message: "Event 26 has occurred.
Contact your system administrator."
You need to access the WebRole1 event log.
Which three actions should you perform? Each correct answer presents part of the solution.
A. Run the Enable-AzureWebsiteApplicationDiagnostic PowerShell cmdlet.
B. Update the WebRole1 web.config file.
C. Run the Set-AzureVMDiagnosticsExtensionPowerShell cmdlet.
D. Create a storage account.
E. Update the cloud service definition file and the service configuration file.
F. Enable verbose monitoring.
Answer: D,E,F
Explanation:
step 1 specify the scheduled TransferLogLevelFilter to Verbose in the diagnostics.wadcfg step 2 Update the cloud service definition file and the service configuration file (.cspkg) step 3 best practice is to create a separate storage account for logging diagnostics data
References: http://azure.microsoft.com/en-us/documentation/articles/cloud-services-how-to-monitor/
E. _65503_
F. _65503$
Answer: D
Explanation:
http://www.cisco.com/c/en/us/td/docs/ios/12_2/termserv/configuration/guide/ftersv_c/tcfaap re.html
NEW QUESTION: 3
An engineer has integrated a new DMVPN to link remote offices across the internet using Cisco IOS routers. When connecting to remote sites, pings and voice data appear to flow properly and all tunnel stats seem to show that are up. However, when trying to connect to a remote server using RDP, the connection fails. Which action resolves this issue?
A. Adjust the MTU size within the routers.
B. Replace certificate on the RDP server.
C. Add RDP port to the extended ACL.
D. Change DMVPN timeout values.
Answer: B
NEW QUESTION: 4
You manage a cloud service that has a web application named WebRole1.
WebRole1 writes error messages to the Windows Event Log.
Users report receiving an error page with the following message: "Event 26 has occurred.
Contact your system administrator."
You need to access the WebRole1 event log.
Which three actions should you perform? Each correct answer presents part of the solution.
A. Run the Enable-AzureWebsiteApplicationDiagnostic PowerShell cmdlet.
B. Update the WebRole1 web.config file.
C. Run the Set-AzureVMDiagnosticsExtensionPowerShell cmdlet.
D. Create a storage account.
E. Update the cloud service definition file and the service configuration file.
F. Enable verbose monitoring.
Answer: D,E,F
Explanation:
step 1 specify the scheduled TransferLogLevelFilter to Verbose in the diagnostics.wadcfg step 2 Update the cloud service definition file and the service configuration file (.cspkg) step 3 best practice is to create a separate storage account for logging diagnostics data
References: http://azure.microsoft.com/en-us/documentation/articles/cloud-services-how-to-monitor/
E. _65503_
F. _65503$
Answer: D
Explanation:
http://www.cisco.com/c/en/us/td/docs/ios/12_2/termserv/configuration/guide/ftersv_c/tcfaap re.html
NEW QUESTION: 3
An engineer has integrated a new DMVPN to link remote offices across the internet using Cisco IOS routers. When connecting to remote sites, pings and voice data appear to flow properly and all tunnel stats seem to show that are up. However, when trying to connect to a remote server using RDP, the connection fails. Which action resolves this issue?
A. Adjust the MTU size within the routers.
B. Replace certificate on the RDP server.
C. Add RDP port to the extended ACL.
D. Change DMVPN timeout values.
Answer: B
NEW QUESTION: 4
You manage a cloud service that has a web application named WebRole1.
WebRole1 writes error messages to the Windows Event Log.
Users report receiving an error page with the following message: "Event 26 has occurred.
Contact your system administrator."
You need to access the WebRole1 event log.
Which three actions should you perform? Each correct answer presents part of the solution.
A. Run the Enable-AzureWebsiteApplicationDiagnostic PowerShell cmdlet.
B. Update the WebRole1 web.config file.
C. Run the Set-AzureVMDiagnosticsExtensionPowerShell cmdlet.
D. Create a storage account.
E. Update the cloud service definition file and the service configuration file.
F. Enable verbose monitoring.
Answer: D,E,F
Explanation:
step 1 specify the scheduled TransferLogLevelFilter to Verbose in the diagnostics.wadcfg step 2 Update the cloud service definition file and the service configuration file (.cspkg) step 3 best practice is to create a separate storage account for logging diagnostics data
References: http://azure.microsoft.com/en-us/documentation/articles/cloud-services-how-to-monitor/
Skip all the worthless PT0-003 65503 .*
E. _65503_
F. _65503$
Answer: D
Explanation:
http://www.cisco.com/c/en/us/td/docs/ios/12_2/termserv/configuration/guide/ftersv_c/tcfaap re.html
NEW QUESTION: 3
An engineer has integrated a new DMVPN to link remote offices across the internet using Cisco IOS routers. When connecting to remote sites, pings and voice data appear to flow properly and all tunnel stats seem to show that are up. However, when trying to connect to a remote server using RDP, the connection fails. Which action resolves this issue?
A. Adjust the MTU size within the routers.
B. Replace certificate on the RDP server.
C. Add RDP port to the extended ACL.
D. Change DMVPN timeout values.
Answer: B
NEW QUESTION: 4
You manage a cloud service that has a web application named WebRole1.
WebRole1 writes error messages to the Windows Event Log.
Users report receiving an error page with the following message: "Event 26 has occurred.
Contact your system administrator."
You need to access the WebRole1 event log.
Which three actions should you perform? Each correct answer presents part of the solution.
A. Run the Enable-AzureWebsiteApplicationDiagnostic PowerShell cmdlet.
B. Update the WebRole1 web.config file.
C. Run the Set-AzureVMDiagnosticsExtensionPowerShell cmdlet.
D. Create a storage account.
E. Update the cloud service definition file and the service configuration file.
F. Enable verbose monitoring.
Answer: D,E,F
Explanation:
step 1 specify the scheduled TransferLogLevelFilter to Verbose in the diagnostics.wadcfg step 2 Update the cloud service definition file and the service configuration file (.cspkg) step 3 best practice is to create a separate storage account for logging diagnostics data
References: http://azure.microsoft.com/en-us/documentation/articles/cloud-services-how-to-monitor/
- 350-701 Testing Engine
- RhMSUS Probesfragen
- 302 PDF Testsoftware
- Sharing-and-Visibility-Architect Trainingsunterlagen
- PCNSC Trainingsunterlagen
- C_C4H225_12 Zertifikatsdemo
- H19-436_V1.0 Prüfungsinformationen
- AZ-900-Deutsch Deutsch Prüfung
- VERISME Zertifizierungsprüfung
- H13-624_V5.5 Zertifizierungsfragen
- Principles-of-Management Deutsch
- PDP9 Übungsmaterialien
- SK0-005 Quizfragen Und Antworten
- C_THR95_2405 Online Prüfung
- F1 Examengine
- C-IEE2E-2404 Exam Fragen
- C_TFG61_2211 Vorbereitung
- OmniStudio-Developer Prüfungsaufgaben
- C_THR82_2405 Deutsch
- CWSP-207 Fragenkatalog
- OMG-OCUP2-FOUND100 Schulungsunterlagen
65503 .*
E. _65503_
F. _65503$
Answer: D
Explanation:
http://www.cisco.com/c/en/us/td/docs/ios/12_2/termserv/configuration/guide/ftersv_c/tcfaap re.html
NEW QUESTION: 3
An engineer has integrated a new DMVPN to link remote offices across the internet using Cisco IOS routers. When connecting to remote sites, pings and voice data appear to flow properly and all tunnel stats seem to show that are up. However, when trying to connect to a remote server using RDP, the connection fails. Which action resolves this issue?
A. Adjust the MTU size within the routers.
B. Replace certificate on the RDP server.
C. Add RDP port to the extended ACL.
D. Change DMVPN timeout values.
Answer: B
NEW QUESTION: 4
You manage a cloud service that has a web application named WebRole1.
WebRole1 writes error messages to the Windows Event Log.
Users report receiving an error page with the following message: "Event 26 has occurred.
Contact your system administrator."
You need to access the WebRole1 event log.
Which three actions should you perform? Each correct answer presents part of the solution.
A. Run the Enable-AzureWebsiteApplicationDiagnostic PowerShell cmdlet.
B. Update the WebRole1 web.config file.
C. Run the Set-AzureVMDiagnosticsExtensionPowerShell cmdlet.
D. Create a storage account.
E. Update the cloud service definition file and the service configuration file.
F. Enable verbose monitoring.
Answer: D,E,F
Explanation:
step 1 specify the scheduled TransferLogLevelFilter to Verbose in the diagnostics.wadcfg step 2 Update the cloud service definition file and the service configuration file (.cspkg) step 3 best practice is to create a separate storage account for logging diagnostics data
References: http://azure.microsoft.com/en-us/documentation/articles/cloud-services-how-to-monitor/
Difficulty finding the right PT0-003 65503 .*
E. _65503_
F. _65503$
Answer: D
Explanation:
http://www.cisco.com/c/en/us/td/docs/ios/12_2/termserv/configuration/guide/ftersv_c/tcfaap re.html
NEW QUESTION: 3
An engineer has integrated a new DMVPN to link remote offices across the internet using Cisco IOS routers. When connecting to remote sites, pings and voice data appear to flow properly and all tunnel stats seem to show that are up. However, when trying to connect to a remote server using RDP, the connection fails. Which action resolves this issue?
A. Adjust the MTU size within the routers.
B. Replace certificate on the RDP server.
C. Add RDP port to the extended ACL.
D. Change DMVPN timeout values.
Answer: B
NEW QUESTION: 4
You manage a cloud service that has a web application named WebRole1.
WebRole1 writes error messages to the Windows Event Log.
Users report receiving an error page with the following message: "Event 26 has occurred.
Contact your system administrator."
You need to access the WebRole1 event log.
Which three actions should you perform? Each correct answer presents part of the solution.
A. Run the Enable-AzureWebsiteApplicationDiagnostic PowerShell cmdlet.
B. Update the WebRole1 web.config file.
C. Run the Set-AzureVMDiagnosticsExtensionPowerShell cmdlet.
D. Create a storage account.
E. Update the cloud service definition file and the service configuration file.
F. Enable verbose monitoring.
Answer: D,E,F
Explanation:
step 1 specify the scheduled TransferLogLevelFilter to Verbose in the diagnostics.wadcfg step 2 Update the cloud service definition file and the service configuration file (.cspkg) step 3 best practice is to create a separate storage account for logging diagnostics data
References: http://azure.microsoft.com/en-us/documentation/articles/cloud-services-how-to-monitor/
E. _65503_
F. _65503$
Answer: D
Explanation:
http://www.cisco.com/c/en/us/td/docs/ios/12_2/termserv/configuration/guide/ftersv_c/tcfaap re.html
NEW QUESTION: 3
An engineer has integrated a new DMVPN to link remote offices across the internet using Cisco IOS routers. When connecting to remote sites, pings and voice data appear to flow properly and all tunnel stats seem to show that are up. However, when trying to connect to a remote server using RDP, the connection fails. Which action resolves this issue?
A. Adjust the MTU size within the routers.
B. Replace certificate on the RDP server.
C. Add RDP port to the extended ACL.
D. Change DMVPN timeout values.
Answer: B
NEW QUESTION: 4
You manage a cloud service that has a web application named WebRole1.
WebRole1 writes error messages to the Windows Event Log.
Users report receiving an error page with the following message: "Event 26 has occurred.
Contact your system administrator."
You need to access the WebRole1 event log.
Which three actions should you perform? Each correct answer presents part of the solution.
A. Run the Enable-AzureWebsiteApplicationDiagnostic PowerShell cmdlet.
B. Update the WebRole1 web.config file.
C. Run the Set-AzureVMDiagnosticsExtensionPowerShell cmdlet.
D. Create a storage account.
E. Update the cloud service definition file and the service configuration file.
F. Enable verbose monitoring.
Answer: D,E,F
Explanation:
step 1 specify the scheduled TransferLogLevelFilter to Verbose in the diagnostics.wadcfg step 2 Update the cloud service definition file and the service configuration file (.cspkg) step 3 best practice is to create a separate storage account for logging diagnostics data
References: http://azure.microsoft.com/en-us/documentation/articles/cloud-services-how-to-monitor/
E. _65503_
F. _65503$
Answer: D
Explanation:
http://www.cisco.com/c/en/us/td/docs/ios/12_2/termserv/configuration/guide/ftersv_c/tcfaap re.html
NEW QUESTION: 3
An engineer has integrated a new DMVPN to link remote offices across the internet using Cisco IOS routers. When connecting to remote sites, pings and voice data appear to flow properly and all tunnel stats seem to show that are up. However, when trying to connect to a remote server using RDP, the connection fails. Which action resolves this issue?
A. Adjust the MTU size within the routers.
B. Replace certificate on the RDP server.
C. Add RDP port to the extended ACL.
D. Change DMVPN timeout values.
Answer: B
NEW QUESTION: 4
You manage a cloud service that has a web application named WebRole1.
WebRole1 writes error messages to the Windows Event Log.
Users report receiving an error page with the following message: "Event 26 has occurred.
Contact your system administrator."
You need to access the WebRole1 event log.
Which three actions should you perform? Each correct answer presents part of the solution.
A. Run the Enable-AzureWebsiteApplicationDiagnostic PowerShell cmdlet.
B. Update the WebRole1 web.config file.
C. Run the Set-AzureVMDiagnosticsExtensionPowerShell cmdlet.
D. Create a storage account.
E. Update the cloud service definition file and the service configuration file.
F. Enable verbose monitoring.
Answer: D,E,F
Explanation:
step 1 specify the scheduled TransferLogLevelFilter to Verbose in the diagnostics.wadcfg step 2 Update the cloud service definition file and the service configuration file (.cspkg) step 3 best practice is to create a separate storage account for logging diagnostics data
References: http://azure.microsoft.com/en-us/documentation/articles/cloud-services-how-to-monitor/
E. _65503_
F. _65503$
Answer: D
Explanation:
http://www.cisco.com/c/en/us/td/docs/ios/12_2/termserv/configuration/guide/ftersv_c/tcfaap re.html
NEW QUESTION: 3
An engineer has integrated a new DMVPN to link remote offices across the internet using Cisco IOS routers. When connecting to remote sites, pings and voice data appear to flow properly and all tunnel stats seem to show that are up. However, when trying to connect to a remote server using RDP, the connection fails. Which action resolves this issue?
A. Adjust the MTU size within the routers.
B. Replace certificate on the RDP server.
C. Add RDP port to the extended ACL.
D. Change DMVPN timeout values.
Answer: B
NEW QUESTION: 4
You manage a cloud service that has a web application named WebRole1.
WebRole1 writes error messages to the Windows Event Log.
Users report receiving an error page with the following message: "Event 26 has occurred.
Contact your system administrator."
You need to access the WebRole1 event log.
Which three actions should you perform? Each correct answer presents part of the solution.
A. Run the Enable-AzureWebsiteApplicationDiagnostic PowerShell cmdlet.
B. Update the WebRole1 web.config file.
C. Run the Set-AzureVMDiagnosticsExtensionPowerShell cmdlet.
D. Create a storage account.
E. Update the cloud service definition file and the service configuration file.
F. Enable verbose monitoring.
Answer: D,E,F
Explanation:
step 1 specify the scheduled TransferLogLevelFilter to Verbose in the diagnostics.wadcfg step 2 Update the cloud service definition file and the service configuration file (.cspkg) step 3 best practice is to create a separate storage account for logging diagnostics data
References: http://azure.microsoft.com/en-us/documentation/articles/cloud-services-how-to-monitor/
- 350-701 Testing Engine
- RhMSUS Probesfragen
- 302 PDF Testsoftware
- Sharing-and-Visibility-Architect Trainingsunterlagen
- PCNSC Trainingsunterlagen
- C_C4H225_12 Zertifikatsdemo
- H19-436_V1.0 Prüfungsinformationen
- AZ-900-Deutsch Deutsch Prüfung
- VERISME Zertifizierungsprüfung
- H13-624_V5.5 Zertifizierungsfragen
- Principles-of-Management Deutsch
- PDP9 Übungsmaterialien
- SK0-005 Quizfragen Und Antworten
- C_THR95_2405 Online Prüfung
- F1 Examengine
- C-IEE2E-2404 Exam Fragen
- C_TFG61_2211 Vorbereitung
- OmniStudio-Developer Prüfungsaufgaben
- C_THR82_2405 Deutsch
- CWSP-207 Fragenkatalog
- OMG-OCUP2-FOUND100 Schulungsunterlagen
E. _65503_
F. _65503$
Answer: D
Explanation:
http://www.cisco.com/c/en/us/td/docs/ios/12_2/termserv/configuration/guide/ftersv_c/tcfaap re.html
NEW QUESTION: 3
An engineer has integrated a new DMVPN to link remote offices across the internet using Cisco IOS routers. When connecting to remote sites, pings and voice data appear to flow properly and all tunnel stats seem to show that are up. However, when trying to connect to a remote server using RDP, the connection fails. Which action resolves this issue?
A. Adjust the MTU size within the routers.
B. Replace certificate on the RDP server.
C. Add RDP port to the extended ACL.
D. Change DMVPN timeout values.
Answer: B
NEW QUESTION: 4
You manage a cloud service that has a web application named WebRole1.
WebRole1 writes error messages to the Windows Event Log.
Users report receiving an error page with the following message: "Event 26 has occurred.
Contact your system administrator."
You need to access the WebRole1 event log.
Which three actions should you perform? Each correct answer presents part of the solution.
A. Run the Enable-AzureWebsiteApplicationDiagnostic PowerShell cmdlet.
B. Update the WebRole1 web.config file.
C. Run the Set-AzureVMDiagnosticsExtensionPowerShell cmdlet.
D. Create a storage account.
E. Update the cloud service definition file and the service configuration file.
F. Enable verbose monitoring.
Answer: D,E,F
Explanation:
step 1 specify the scheduled TransferLogLevelFilter to Verbose in the diagnostics.wadcfg step 2 Update the cloud service definition file and the service configuration file (.cspkg) step 3 best practice is to create a separate storage account for logging diagnostics data
References: http://azure.microsoft.com/en-us/documentation/articles/cloud-services-how-to-monitor/
- 350-701 Testing Engine
- RhMSUS Probesfragen
- 302 PDF Testsoftware
- Sharing-and-Visibility-Architect Trainingsunterlagen
- PCNSC Trainingsunterlagen
- C_C4H225_12 Zertifikatsdemo
- H19-436_V1.0 Prüfungsinformationen
- AZ-900-Deutsch Deutsch Prüfung
- VERISME Zertifizierungsprüfung
- H13-624_V5.5 Zertifizierungsfragen
- Principles-of-Management Deutsch
- PDP9 Übungsmaterialien
- SK0-005 Quizfragen Und Antworten
- C_THR95_2405 Online Prüfung
- F1 Examengine
- C-IEE2E-2404 Exam Fragen
- C_TFG61_2211 Vorbereitung
- OmniStudio-Developer Prüfungsaufgaben
- C_THR82_2405 Deutsch
- CWSP-207 Fragenkatalog
- OMG-OCUP2-FOUND100 Schulungsunterlagen
E. _65503_
F. _65503$
Answer: D
Explanation:
http://www.cisco.com/c/en/us/td/docs/ios/12_2/termserv/configuration/guide/ftersv_c/tcfaap re.html
NEW QUESTION: 3
An engineer has integrated a new DMVPN to link remote offices across the internet using Cisco IOS routers. When connecting to remote sites, pings and voice data appear to flow properly and all tunnel stats seem to show that are up. However, when trying to connect to a remote server using RDP, the connection fails. Which action resolves this issue?
A. Adjust the MTU size within the routers.
B. Replace certificate on the RDP server.
C. Add RDP port to the extended ACL.
D. Change DMVPN timeout values.
Answer: B
NEW QUESTION: 4
You manage a cloud service that has a web application named WebRole1.
WebRole1 writes error messages to the Windows Event Log.
Users report receiving an error page with the following message: "Event 26 has occurred.
Contact your system administrator."
You need to access the WebRole1 event log.
Which three actions should you perform? Each correct answer presents part of the solution.
A. Run the Enable-AzureWebsiteApplicationDiagnostic PowerShell cmdlet.
B. Update the WebRole1 web.config file.
C. Run the Set-AzureVMDiagnosticsExtensionPowerShell cmdlet.
D. Create a storage account.
E. Update the cloud service definition file and the service configuration file.
F. Enable verbose monitoring.
Answer: D,E,F
Explanation:
step 1 specify the scheduled TransferLogLevelFilter to Verbose in the diagnostics.wadcfg step 2 Update the cloud service definition file and the service configuration file (.cspkg) step 3 best practice is to create a separate storage account for logging diagnostics data
References: http://azure.microsoft.com/en-us/documentation/articles/cloud-services-how-to-monitor/
E. _65503_
F. _65503$
Answer: D
Explanation:
http://www.cisco.com/c/en/us/td/docs/ios/12_2/termserv/configuration/guide/ftersv_c/tcfaap re.html
NEW QUESTION: 3
An engineer has integrated a new DMVPN to link remote offices across the internet using Cisco IOS routers. When connecting to remote sites, pings and voice data appear to flow properly and all tunnel stats seem to show that are up. However, when trying to connect to a remote server using RDP, the connection fails. Which action resolves this issue?
A. Adjust the MTU size within the routers.
B. Replace certificate on the RDP server.
C. Add RDP port to the extended ACL.
D. Change DMVPN timeout values.
Answer: B
NEW QUESTION: 4
You manage a cloud service that has a web application named WebRole1.
WebRole1 writes error messages to the Windows Event Log.
Users report receiving an error page with the following message: "Event 26 has occurred.
Contact your system administrator."
You need to access the WebRole1 event log.
Which three actions should you perform? Each correct answer presents part of the solution.
A. Run the Enable-AzureWebsiteApplicationDiagnostic PowerShell cmdlet.
B. Update the WebRole1 web.config file.
C. Run the Set-AzureVMDiagnosticsExtensionPowerShell cmdlet.
D. Create a storage account.
E. Update the cloud service definition file and the service configuration file.
F. Enable verbose monitoring.
Answer: D,E,F
Explanation:
step 1 specify the scheduled TransferLogLevelFilter to Verbose in the diagnostics.wadcfg step 2 Update the cloud service definition file and the service configuration file (.cspkg) step 3 best practice is to create a separate storage account for logging diagnostics data
References: http://azure.microsoft.com/en-us/documentation/articles/cloud-services-how-to-monitor/
E. _65503_
F. _65503$
Answer: D
Explanation:
http://www.cisco.com/c/en/us/td/docs/ios/12_2/termserv/configuration/guide/ftersv_c/tcfaap re.html
NEW QUESTION: 3
An engineer has integrated a new DMVPN to link remote offices across the internet using Cisco IOS routers. When connecting to remote sites, pings and voice data appear to flow properly and all tunnel stats seem to show that are up. However, when trying to connect to a remote server using RDP, the connection fails. Which action resolves this issue?
A. Adjust the MTU size within the routers.
B. Replace certificate on the RDP server.
C. Add RDP port to the extended ACL.
D. Change DMVPN timeout values.
Answer: B
NEW QUESTION: 4
You manage a cloud service that has a web application named WebRole1.
WebRole1 writes error messages to the Windows Event Log.
Users report receiving an error page with the following message: "Event 26 has occurred.
Contact your system administrator."
You need to access the WebRole1 event log.
Which three actions should you perform? Each correct answer presents part of the solution.
A. Run the Enable-AzureWebsiteApplicationDiagnostic PowerShell cmdlet.
B. Update the WebRole1 web.config file.
C. Run the Set-AzureVMDiagnosticsExtensionPowerShell cmdlet.
D. Create a storage account.
E. Update the cloud service definition file and the service configuration file.
F. Enable verbose monitoring.
Answer: D,E,F
Explanation:
step 1 specify the scheduled TransferLogLevelFilter to Verbose in the diagnostics.wadcfg step 2 Update the cloud service definition file and the service configuration file (.cspkg) step 3 best practice is to create a separate storage account for logging diagnostics data
References: http://azure.microsoft.com/en-us/documentation/articles/cloud-services-how-to-monitor/
65503 .*
E. _65503_
F. _65503$
Answer: D
Explanation:
http://www.cisco.com/c/en/us/td/docs/ios/12_2/termserv/configuration/guide/ftersv_c/tcfaap re.html
NEW QUESTION: 3
An engineer has integrated a new DMVPN to link remote offices across the internet using Cisco IOS routers. When connecting to remote sites, pings and voice data appear to flow properly and all tunnel stats seem to show that are up. However, when trying to connect to a remote server using RDP, the connection fails. Which action resolves this issue?
A. Adjust the MTU size within the routers.
B. Replace certificate on the RDP server.
C. Add RDP port to the extended ACL.
D. Change DMVPN timeout values.
Answer: B
NEW QUESTION: 4
You manage a cloud service that has a web application named WebRole1.
WebRole1 writes error messages to the Windows Event Log.
Users report receiving an error page with the following message: "Event 26 has occurred.
Contact your system administrator."
You need to access the WebRole1 event log.
Which three actions should you perform? Each correct answer presents part of the solution.
A. Run the Enable-AzureWebsiteApplicationDiagnostic PowerShell cmdlet.
B. Update the WebRole1 web.config file.
C. Run the Set-AzureVMDiagnosticsExtensionPowerShell cmdlet.
D. Create a storage account.
E. Update the cloud service definition file and the service configuration file.
F. Enable verbose monitoring.
Answer: D,E,F
Explanation:
step 1 specify the scheduled TransferLogLevelFilter to Verbose in the diagnostics.wadcfg step 2 Update the cloud service definition file and the service configuration file (.cspkg) step 3 best practice is to create a separate storage account for logging diagnostics data
References: http://azure.microsoft.com/en-us/documentation/articles/cloud-services-how-to-monitor/
Still searching for PT0-003 65503 .*
E. _65503_
F. _65503$
Answer: D
Explanation:
http://www.cisco.com/c/en/us/td/docs/ios/12_2/termserv/configuration/guide/ftersv_c/tcfaap re.html
NEW QUESTION: 3
An engineer has integrated a new DMVPN to link remote offices across the internet using Cisco IOS routers. When connecting to remote sites, pings and voice data appear to flow properly and all tunnel stats seem to show that are up. However, when trying to connect to a remote server using RDP, the connection fails. Which action resolves this issue?
A. Adjust the MTU size within the routers.
B. Replace certificate on the RDP server.
C. Add RDP port to the extended ACL.
D. Change DMVPN timeout values.
Answer: B
NEW QUESTION: 4
You manage a cloud service that has a web application named WebRole1.
WebRole1 writes error messages to the Windows Event Log.
Users report receiving an error page with the following message: "Event 26 has occurred.
Contact your system administrator."
You need to access the WebRole1 event log.
Which three actions should you perform? Each correct answer presents part of the solution.
A. Run the Enable-AzureWebsiteApplicationDiagnostic PowerShell cmdlet.
B. Update the WebRole1 web.config file.
C. Run the Set-AzureVMDiagnosticsExtensionPowerShell cmdlet.
D. Create a storage account.
E. Update the cloud service definition file and the service configuration file.
F. Enable verbose monitoring.
Answer: D,E,F
Explanation:
step 1 specify the scheduled TransferLogLevelFilter to Verbose in the diagnostics.wadcfg step 2 Update the cloud service definition file and the service configuration file (.cspkg) step 3 best practice is to create a separate storage account for logging diagnostics data
References: http://azure.microsoft.com/en-us/documentation/articles/cloud-services-how-to-monitor/
E. _65503_
F. _65503$
Answer: D
Explanation:
http://www.cisco.com/c/en/us/td/docs/ios/12_2/termserv/configuration/guide/ftersv_c/tcfaap re.html
NEW QUESTION: 3
An engineer has integrated a new DMVPN to link remote offices across the internet using Cisco IOS routers. When connecting to remote sites, pings and voice data appear to flow properly and all tunnel stats seem to show that are up. However, when trying to connect to a remote server using RDP, the connection fails. Which action resolves this issue?
A. Adjust the MTU size within the routers.
B. Replace certificate on the RDP server.
C. Add RDP port to the extended ACL.
D. Change DMVPN timeout values.
Answer: B
NEW QUESTION: 4
You manage a cloud service that has a web application named WebRole1.
WebRole1 writes error messages to the Windows Event Log.
Users report receiving an error page with the following message: "Event 26 has occurred.
Contact your system administrator."
You need to access the WebRole1 event log.
Which three actions should you perform? Each correct answer presents part of the solution.
A. Run the Enable-AzureWebsiteApplicationDiagnostic PowerShell cmdlet.
B. Update the WebRole1 web.config file.
C. Run the Set-AzureVMDiagnosticsExtensionPowerShell cmdlet.
D. Create a storage account.
E. Update the cloud service definition file and the service configuration file.
F. Enable verbose monitoring.
Answer: D,E,F
Explanation:
step 1 specify the scheduled TransferLogLevelFilter to Verbose in the diagnostics.wadcfg step 2 Update the cloud service definition file and the service configuration file (.cspkg) step 3 best practice is to create a separate storage account for logging diagnostics data
References: http://azure.microsoft.com/en-us/documentation/articles/cloud-services-how-to-monitor/
E. _65503_
F. _65503$
Answer: D
Explanation:
http://www.cisco.com/c/en/us/td/docs/ios/12_2/termserv/configuration/guide/ftersv_c/tcfaap re.html
NEW QUESTION: 3
An engineer has integrated a new DMVPN to link remote offices across the internet using Cisco IOS routers. When connecting to remote sites, pings and voice data appear to flow properly and all tunnel stats seem to show that are up. However, when trying to connect to a remote server using RDP, the connection fails. Which action resolves this issue?
A. Adjust the MTU size within the routers.
B. Replace certificate on the RDP server.
C. Add RDP port to the extended ACL.
D. Change DMVPN timeout values.
Answer: B
NEW QUESTION: 4
You manage a cloud service that has a web application named WebRole1.
WebRole1 writes error messages to the Windows Event Log.
Users report receiving an error page with the following message: "Event 26 has occurred.
Contact your system administrator."
You need to access the WebRole1 event log.
Which three actions should you perform? Each correct answer presents part of the solution.
A. Run the Enable-AzureWebsiteApplicationDiagnostic PowerShell cmdlet.
B. Update the WebRole1 web.config file.
C. Run the Set-AzureVMDiagnosticsExtensionPowerShell cmdlet.
D. Create a storage account.
E. Update the cloud service definition file and the service configuration file.
F. Enable verbose monitoring.
Answer: D,E,F
Explanation:
step 1 specify the scheduled TransferLogLevelFilter to Verbose in the diagnostics.wadcfg step 2 Update the cloud service definition file and the service configuration file (.cspkg) step 3 best practice is to create a separate storage account for logging diagnostics data
References: http://azure.microsoft.com/en-us/documentation/articles/cloud-services-how-to-monitor/
E. _65503_
F. _65503$
Answer: D
Explanation:
http://www.cisco.com/c/en/us/td/docs/ios/12_2/termserv/configuration/guide/ftersv_c/tcfaap re.html
NEW QUESTION: 3
An engineer has integrated a new DMVPN to link remote offices across the internet using Cisco IOS routers. When connecting to remote sites, pings and voice data appear to flow properly and all tunnel stats seem to show that are up. However, when trying to connect to a remote server using RDP, the connection fails. Which action resolves this issue?
A. Adjust the MTU size within the routers.
B. Replace certificate on the RDP server.
C. Add RDP port to the extended ACL.
D. Change DMVPN timeout values.
Answer: B
NEW QUESTION: 4
You manage a cloud service that has a web application named WebRole1.
WebRole1 writes error messages to the Windows Event Log.
Users report receiving an error page with the following message: "Event 26 has occurred.
Contact your system administrator."
You need to access the WebRole1 event log.
Which three actions should you perform? Each correct answer presents part of the solution.
A. Run the Enable-AzureWebsiteApplicationDiagnostic PowerShell cmdlet.
B. Update the WebRole1 web.config file.
C. Run the Set-AzureVMDiagnosticsExtensionPowerShell cmdlet.
D. Create a storage account.
E. Update the cloud service definition file and the service configuration file.
F. Enable verbose monitoring.
Answer: D,E,F
Explanation:
step 1 specify the scheduled TransferLogLevelFilter to Verbose in the diagnostics.wadcfg step 2 Update the cloud service definition file and the service configuration file (.cspkg) step 3 best practice is to create a separate storage account for logging diagnostics data
References: http://azure.microsoft.com/en-us/documentation/articles/cloud-services-how-to-monitor/
E. _65503_
F. _65503$
Answer: D
Explanation:
http://www.cisco.com/c/en/us/td/docs/ios/12_2/termserv/configuration/guide/ftersv_c/tcfaap re.html
NEW QUESTION: 3
An engineer has integrated a new DMVPN to link remote offices across the internet using Cisco IOS routers. When connecting to remote sites, pings and voice data appear to flow properly and all tunnel stats seem to show that are up. However, when trying to connect to a remote server using RDP, the connection fails. Which action resolves this issue?
A. Adjust the MTU size within the routers.
B. Replace certificate on the RDP server.
C. Add RDP port to the extended ACL.
D. Change DMVPN timeout values.
Answer: B
NEW QUESTION: 4
You manage a cloud service that has a web application named WebRole1.
WebRole1 writes error messages to the Windows Event Log.
Users report receiving an error page with the following message: "Event 26 has occurred.
Contact your system administrator."
You need to access the WebRole1 event log.
Which three actions should you perform? Each correct answer presents part of the solution.
A. Run the Enable-AzureWebsiteApplicationDiagnostic PowerShell cmdlet.
B. Update the WebRole1 web.config file.
C. Run the Set-AzureVMDiagnosticsExtensionPowerShell cmdlet.
D. Create a storage account.
E. Update the cloud service definition file and the service configuration file.
F. Enable verbose monitoring.
Answer: D,E,F
Explanation:
step 1 specify the scheduled TransferLogLevelFilter to Verbose in the diagnostics.wadcfg step 2 Update the cloud service definition file and the service configuration file (.cspkg) step 3 best practice is to create a separate storage account for logging diagnostics data
References: http://azure.microsoft.com/en-us/documentation/articles/cloud-services-how-to-monitor/
E. _65503_
F. _65503$
Answer: D
Explanation:
http://www.cisco.com/c/en/us/td/docs/ios/12_2/termserv/configuration/guide/ftersv_c/tcfaap re.html
NEW QUESTION: 3
An engineer has integrated a new DMVPN to link remote offices across the internet using Cisco IOS routers. When connecting to remote sites, pings and voice data appear to flow properly and all tunnel stats seem to show that are up. However, when trying to connect to a remote server using RDP, the connection fails. Which action resolves this issue?
A. Adjust the MTU size within the routers.
B. Replace certificate on the RDP server.
C. Add RDP port to the extended ACL.
D. Change DMVPN timeout values.
Answer: B
NEW QUESTION: 4
You manage a cloud service that has a web application named WebRole1.
WebRole1 writes error messages to the Windows Event Log.
Users report receiving an error page with the following message: "Event 26 has occurred.
Contact your system administrator."
You need to access the WebRole1 event log.
Which three actions should you perform? Each correct answer presents part of the solution.
A. Run the Enable-AzureWebsiteApplicationDiagnostic PowerShell cmdlet.
B. Update the WebRole1 web.config file.
C. Run the Set-AzureVMDiagnosticsExtensionPowerShell cmdlet.
D. Create a storage account.
E. Update the cloud service definition file and the service configuration file.
F. Enable verbose monitoring.
Answer: D,E,F
Explanation:
step 1 specify the scheduled TransferLogLevelFilter to Verbose in the diagnostics.wadcfg step 2 Update the cloud service definition file and the service configuration file (.cspkg) step 3 best practice is to create a separate storage account for logging diagnostics data
References: http://azure.microsoft.com/en-us/documentation/articles/cloud-services-how-to-monitor/
E. _65503_
F. _65503$
Answer: D
Explanation:
http://www.cisco.com/c/en/us/td/docs/ios/12_2/termserv/configuration/guide/ftersv_c/tcfaap re.html
NEW QUESTION: 3
An engineer has integrated a new DMVPN to link remote offices across the internet using Cisco IOS routers. When connecting to remote sites, pings and voice data appear to flow properly and all tunnel stats seem to show that are up. However, when trying to connect to a remote server using RDP, the connection fails. Which action resolves this issue?
A. Adjust the MTU size within the routers.
B. Replace certificate on the RDP server.
C. Add RDP port to the extended ACL.
D. Change DMVPN timeout values.
Answer: B
NEW QUESTION: 4
You manage a cloud service that has a web application named WebRole1.
WebRole1 writes error messages to the Windows Event Log.
Users report receiving an error page with the following message: "Event 26 has occurred.
Contact your system administrator."
You need to access the WebRole1 event log.
Which three actions should you perform? Each correct answer presents part of the solution.
A. Run the Enable-AzureWebsiteApplicationDiagnostic PowerShell cmdlet.
B. Update the WebRole1 web.config file.
C. Run the Set-AzureVMDiagnosticsExtensionPowerShell cmdlet.
D. Create a storage account.
E. Update the cloud service definition file and the service configuration file.
F. Enable verbose monitoring.
Answer: D,E,F
Explanation:
step 1 specify the scheduled TransferLogLevelFilter to Verbose in the diagnostics.wadcfg step 2 Update the cloud service definition file and the service configuration file (.cspkg) step 3 best practice is to create a separate storage account for logging diagnostics data
References: http://azure.microsoft.com/en-us/documentation/articles/cloud-services-how-to-monitor/
65503 .*
E. _65503_
F. _65503$
Answer: D
Explanation:
http://www.cisco.com/c/en/us/td/docs/ios/12_2/termserv/configuration/guide/ftersv_c/tcfaap re.html
NEW QUESTION: 3
An engineer has integrated a new DMVPN to link remote offices across the internet using Cisco IOS routers. When connecting to remote sites, pings and voice data appear to flow properly and all tunnel stats seem to show that are up. However, when trying to connect to a remote server using RDP, the connection fails. Which action resolves this issue?
A. Adjust the MTU size within the routers.
B. Replace certificate on the RDP server.
C. Add RDP port to the extended ACL.
D. Change DMVPN timeout values.
Answer: B
NEW QUESTION: 4
You manage a cloud service that has a web application named WebRole1.
WebRole1 writes error messages to the Windows Event Log.
Users report receiving an error page with the following message: "Event 26 has occurred.
Contact your system administrator."
You need to access the WebRole1 event log.
Which three actions should you perform? Each correct answer presents part of the solution.
A. Run the Enable-AzureWebsiteApplicationDiagnostic PowerShell cmdlet.
B. Update the WebRole1 web.config file.
C. Run the Set-AzureVMDiagnosticsExtensionPowerShell cmdlet.
D. Create a storage account.
E. Update the cloud service definition file and the service configuration file.
F. Enable verbose monitoring.
Answer: D,E,F
Explanation:
step 1 specify the scheduled TransferLogLevelFilter to Verbose in the diagnostics.wadcfg step 2 Update the cloud service definition file and the service configuration file (.cspkg) step 3 best practice is to create a separate storage account for logging diagnostics data
References: http://azure.microsoft.com/en-us/documentation/articles/cloud-services-how-to-monitor/
Keep walking if all you want is free PT0-003 65503 .*
E. _65503_
F. _65503$
Answer: D
Explanation:
http://www.cisco.com/c/en/us/td/docs/ios/12_2/termserv/configuration/guide/ftersv_c/tcfaap re.html
NEW QUESTION: 3
An engineer has integrated a new DMVPN to link remote offices across the internet using Cisco IOS routers. When connecting to remote sites, pings and voice data appear to flow properly and all tunnel stats seem to show that are up. However, when trying to connect to a remote server using RDP, the connection fails. Which action resolves this issue?
A. Adjust the MTU size within the routers.
B. Replace certificate on the RDP server.
C. Add RDP port to the extended ACL.
D. Change DMVPN timeout values.
Answer: B
NEW QUESTION: 4
You manage a cloud service that has a web application named WebRole1.
WebRole1 writes error messages to the Windows Event Log.
Users report receiving an error page with the following message: "Event 26 has occurred.
Contact your system administrator."
You need to access the WebRole1 event log.
Which three actions should you perform? Each correct answer presents part of the solution.
A. Run the Enable-AzureWebsiteApplicationDiagnostic PowerShell cmdlet.
B. Update the WebRole1 web.config file.
C. Run the Set-AzureVMDiagnosticsExtensionPowerShell cmdlet.
D. Create a storage account.
E. Update the cloud service definition file and the service configuration file.
F. Enable verbose monitoring.
Answer: D,E,F
Explanation:
step 1 specify the scheduled TransferLogLevelFilter to Verbose in the diagnostics.wadcfg step 2 Update the cloud service definition file and the service configuration file (.cspkg) step 3 best practice is to create a separate storage account for logging diagnostics data
References: http://azure.microsoft.com/en-us/documentation/articles/cloud-services-how-to-monitor/
E. _65503_
F. _65503$
Answer: D
Explanation:
http://www.cisco.com/c/en/us/td/docs/ios/12_2/termserv/configuration/guide/ftersv_c/tcfaap re.html
NEW QUESTION: 3
An engineer has integrated a new DMVPN to link remote offices across the internet using Cisco IOS routers. When connecting to remote sites, pings and voice data appear to flow properly and all tunnel stats seem to show that are up. However, when trying to connect to a remote server using RDP, the connection fails. Which action resolves this issue?
A. Adjust the MTU size within the routers.
B. Replace certificate on the RDP server.
C. Add RDP port to the extended ACL.
D. Change DMVPN timeout values.
Answer: B
NEW QUESTION: 4
You manage a cloud service that has a web application named WebRole1.
WebRole1 writes error messages to the Windows Event Log.
Users report receiving an error page with the following message: "Event 26 has occurred.
Contact your system administrator."
You need to access the WebRole1 event log.
Which three actions should you perform? Each correct answer presents part of the solution.
A. Run the Enable-AzureWebsiteApplicationDiagnostic PowerShell cmdlet.
B. Update the WebRole1 web.config file.
C. Run the Set-AzureVMDiagnosticsExtensionPowerShell cmdlet.
D. Create a storage account.
E. Update the cloud service definition file and the service configuration file.
F. Enable verbose monitoring.
Answer: D,E,F
Explanation:
step 1 specify the scheduled TransferLogLevelFilter to Verbose in the diagnostics.wadcfg step 2 Update the cloud service definition file and the service configuration file (.cspkg) step 3 best practice is to create a separate storage account for logging diagnostics data
References: http://azure.microsoft.com/en-us/documentation/articles/cloud-services-how-to-monitor/
- 350-701 Testing Engine
- RhMSUS Probesfragen
- 302 PDF Testsoftware
- Sharing-and-Visibility-Architect Trainingsunterlagen
- PCNSC Trainingsunterlagen
- C_C4H225_12 Zertifikatsdemo
- H19-436_V1.0 Prüfungsinformationen
- AZ-900-Deutsch Deutsch Prüfung
- VERISME Zertifizierungsprüfung
- H13-624_V5.5 Zertifizierungsfragen
- Principles-of-Management Deutsch
- PDP9 Übungsmaterialien
- SK0-005 Quizfragen Und Antworten
- C_THR95_2405 Online Prüfung
- F1 Examengine
- C-IEE2E-2404 Exam Fragen
- C_TFG61_2211 Vorbereitung
- OmniStudio-Developer Prüfungsaufgaben
- C_THR82_2405 Deutsch
- CWSP-207 Fragenkatalog
- OMG-OCUP2-FOUND100 Schulungsunterlagen
E. _65503_
F. _65503$
Answer: D
Explanation:
http://www.cisco.com/c/en/us/td/docs/ios/12_2/termserv/configuration/guide/ftersv_c/tcfaap re.html
NEW QUESTION: 3
An engineer has integrated a new DMVPN to link remote offices across the internet using Cisco IOS routers. When connecting to remote sites, pings and voice data appear to flow properly and all tunnel stats seem to show that are up. However, when trying to connect to a remote server using RDP, the connection fails. Which action resolves this issue?
A. Adjust the MTU size within the routers.
B. Replace certificate on the RDP server.
C. Add RDP port to the extended ACL.
D. Change DMVPN timeout values.
Answer: B
NEW QUESTION: 4
You manage a cloud service that has a web application named WebRole1.
WebRole1 writes error messages to the Windows Event Log.
Users report receiving an error page with the following message: "Event 26 has occurred.
Contact your system administrator."
You need to access the WebRole1 event log.
Which three actions should you perform? Each correct answer presents part of the solution.
A. Run the Enable-AzureWebsiteApplicationDiagnostic PowerShell cmdlet.
B. Update the WebRole1 web.config file.
C. Run the Set-AzureVMDiagnosticsExtensionPowerShell cmdlet.
D. Create a storage account.
E. Update the cloud service definition file and the service configuration file.
F. Enable verbose monitoring.
Answer: D,E,F
Explanation:
step 1 specify the scheduled TransferLogLevelFilter to Verbose in the diagnostics.wadcfg step 2 Update the cloud service definition file and the service configuration file (.cspkg) step 3 best practice is to create a separate storage account for logging diagnostics data
References: http://azure.microsoft.com/en-us/documentation/articles/cloud-services-how-to-monitor/
E. _65503_
F. _65503$
Answer: D
Explanation:
http://www.cisco.com/c/en/us/td/docs/ios/12_2/termserv/configuration/guide/ftersv_c/tcfaap re.html
NEW QUESTION: 3
An engineer has integrated a new DMVPN to link remote offices across the internet using Cisco IOS routers. When connecting to remote sites, pings and voice data appear to flow properly and all tunnel stats seem to show that are up. However, when trying to connect to a remote server using RDP, the connection fails. Which action resolves this issue?
A. Adjust the MTU size within the routers.
B. Replace certificate on the RDP server.
C. Add RDP port to the extended ACL.
D. Change DMVPN timeout values.
Answer: B
NEW QUESTION: 4
You manage a cloud service that has a web application named WebRole1.
WebRole1 writes error messages to the Windows Event Log.
Users report receiving an error page with the following message: "Event 26 has occurred.
Contact your system administrator."
You need to access the WebRole1 event log.
Which three actions should you perform? Each correct answer presents part of the solution.
A. Run the Enable-AzureWebsiteApplicationDiagnostic PowerShell cmdlet.
B. Update the WebRole1 web.config file.
C. Run the Set-AzureVMDiagnosticsExtensionPowerShell cmdlet.
D. Create a storage account.
E. Update the cloud service definition file and the service configuration file.
F. Enable verbose monitoring.
Answer: D,E,F
Explanation:
step 1 specify the scheduled TransferLogLevelFilter to Verbose in the diagnostics.wadcfg step 2 Update the cloud service definition file and the service configuration file (.cspkg) step 3 best practice is to create a separate storage account for logging diagnostics data
References: http://azure.microsoft.com/en-us/documentation/articles/cloud-services-how-to-monitor/
E. _65503_
F. _65503$
Answer: D
Explanation:
http://www.cisco.com/c/en/us/td/docs/ios/12_2/termserv/configuration/guide/ftersv_c/tcfaap re.html
NEW QUESTION: 3
An engineer has integrated a new DMVPN to link remote offices across the internet using Cisco IOS routers. When connecting to remote sites, pings and voice data appear to flow properly and all tunnel stats seem to show that are up. However, when trying to connect to a remote server using RDP, the connection fails. Which action resolves this issue?
A. Adjust the MTU size within the routers.
B. Replace certificate on the RDP server.
C. Add RDP port to the extended ACL.
D. Change DMVPN timeout values.
Answer: B
NEW QUESTION: 4
You manage a cloud service that has a web application named WebRole1.
WebRole1 writes error messages to the Windows Event Log.
Users report receiving an error page with the following message: "Event 26 has occurred.
Contact your system administrator."
You need to access the WebRole1 event log.
Which three actions should you perform? Each correct answer presents part of the solution.
A. Run the Enable-AzureWebsiteApplicationDiagnostic PowerShell cmdlet.
B. Update the WebRole1 web.config file.
C. Run the Set-AzureVMDiagnosticsExtensionPowerShell cmdlet.
D. Create a storage account.
E. Update the cloud service definition file and the service configuration file.
F. Enable verbose monitoring.
Answer: D,E,F
Explanation:
step 1 specify the scheduled TransferLogLevelFilter to Verbose in the diagnostics.wadcfg step 2 Update the cloud service definition file and the service configuration file (.cspkg) step 3 best practice is to create a separate storage account for logging diagnostics data
References: http://azure.microsoft.com/en-us/documentation/articles/cloud-services-how-to-monitor/
E. _65503_
F. _65503$
Answer: D
Explanation:
http://www.cisco.com/c/en/us/td/docs/ios/12_2/termserv/configuration/guide/ftersv_c/tcfaap re.html
NEW QUESTION: 3
An engineer has integrated a new DMVPN to link remote offices across the internet using Cisco IOS routers. When connecting to remote sites, pings and voice data appear to flow properly and all tunnel stats seem to show that are up. However, when trying to connect to a remote server using RDP, the connection fails. Which action resolves this issue?
A. Adjust the MTU size within the routers.
B. Replace certificate on the RDP server.
C. Add RDP port to the extended ACL.
D. Change DMVPN timeout values.
Answer: B
NEW QUESTION: 4
You manage a cloud service that has a web application named WebRole1.
WebRole1 writes error messages to the Windows Event Log.
Users report receiving an error page with the following message: "Event 26 has occurred.
Contact your system administrator."
You need to access the WebRole1 event log.
Which three actions should you perform? Each correct answer presents part of the solution.
A. Run the Enable-AzureWebsiteApplicationDiagnostic PowerShell cmdlet.
B. Update the WebRole1 web.config file.
C. Run the Set-AzureVMDiagnosticsExtensionPowerShell cmdlet.
D. Create a storage account.
E. Update the cloud service definition file and the service configuration file.
F. Enable verbose monitoring.
Answer: D,E,F
Explanation:
step 1 specify the scheduled TransferLogLevelFilter to Verbose in the diagnostics.wadcfg step 2 Update the cloud service definition file and the service configuration file (.cspkg) step 3 best practice is to create a separate storage account for logging diagnostics data
References: http://azure.microsoft.com/en-us/documentation/articles/cloud-services-how-to-monitor/
65503 .*
E. _65503_
F. _65503$
Answer: D
Explanation:
http://www.cisco.com/c/en/us/td/docs/ios/12_2/termserv/configuration/guide/ftersv_c/tcfaap re.html
NEW QUESTION: 3
An engineer has integrated a new DMVPN to link remote offices across the internet using Cisco IOS routers. When connecting to remote sites, pings and voice data appear to flow properly and all tunnel stats seem to show that are up. However, when trying to connect to a remote server using RDP, the connection fails. Which action resolves this issue?
A. Adjust the MTU size within the routers.
B. Replace certificate on the RDP server.
C. Add RDP port to the extended ACL.
D. Change DMVPN timeout values.
Answer: B
NEW QUESTION: 4
You manage a cloud service that has a web application named WebRole1.
WebRole1 writes error messages to the Windows Event Log.
Users report receiving an error page with the following message: "Event 26 has occurred.
Contact your system administrator."
You need to access the WebRole1 event log.
Which three actions should you perform? Each correct answer presents part of the solution.
A. Run the Enable-AzureWebsiteApplicationDiagnostic PowerShell cmdlet.
B. Update the WebRole1 web.config file.
C. Run the Set-AzureVMDiagnosticsExtensionPowerShell cmdlet.
D. Create a storage account.
E. Update the cloud service definition file and the service configuration file.
F. Enable verbose monitoring.
Answer: D,E,F
Explanation:
step 1 specify the scheduled TransferLogLevelFilter to Verbose in the diagnostics.wadcfg step 2 Update the cloud service definition file and the service configuration file (.cspkg) step 3 best practice is to create a separate storage account for logging diagnostics data
References: http://azure.microsoft.com/en-us/documentation/articles/cloud-services-how-to-monitor/
What you will not find at Ce-Isareti are latest PT0-003 65503 .*
E. _65503_
F. _65503$
Answer: D
Explanation:
http://www.cisco.com/c/en/us/td/docs/ios/12_2/termserv/configuration/guide/ftersv_c/tcfaap re.html
NEW QUESTION: 3
An engineer has integrated a new DMVPN to link remote offices across the internet using Cisco IOS routers. When connecting to remote sites, pings and voice data appear to flow properly and all tunnel stats seem to show that are up. However, when trying to connect to a remote server using RDP, the connection fails. Which action resolves this issue?
A. Adjust the MTU size within the routers.
B. Replace certificate on the RDP server.
C. Add RDP port to the extended ACL.
D. Change DMVPN timeout values.
Answer: B
NEW QUESTION: 4
You manage a cloud service that has a web application named WebRole1.
WebRole1 writes error messages to the Windows Event Log.
Users report receiving an error page with the following message: "Event 26 has occurred.
Contact your system administrator."
You need to access the WebRole1 event log.
Which three actions should you perform? Each correct answer presents part of the solution.
A. Run the Enable-AzureWebsiteApplicationDiagnostic PowerShell cmdlet.
B. Update the WebRole1 web.config file.
C. Run the Set-AzureVMDiagnosticsExtensionPowerShell cmdlet.
D. Create a storage account.
E. Update the cloud service definition file and the service configuration file.
F. Enable verbose monitoring.
Answer: D,E,F
Explanation:
step 1 specify the scheduled TransferLogLevelFilter to Verbose in the diagnostics.wadcfg step 2 Update the cloud service definition file and the service configuration file (.cspkg) step 3 best practice is to create a separate storage account for logging diagnostics data
References: http://azure.microsoft.com/en-us/documentation/articles/cloud-services-how-to-monitor/
E. _65503_
F. _65503$
Answer: D
Explanation:
http://www.cisco.com/c/en/us/td/docs/ios/12_2/termserv/configuration/guide/ftersv_c/tcfaap re.html
NEW QUESTION: 3
An engineer has integrated a new DMVPN to link remote offices across the internet using Cisco IOS routers. When connecting to remote sites, pings and voice data appear to flow properly and all tunnel stats seem to show that are up. However, when trying to connect to a remote server using RDP, the connection fails. Which action resolves this issue?
A. Adjust the MTU size within the routers.
B. Replace certificate on the RDP server.
C. Add RDP port to the extended ACL.
D. Change DMVPN timeout values.
Answer: B
NEW QUESTION: 4
You manage a cloud service that has a web application named WebRole1.
WebRole1 writes error messages to the Windows Event Log.
Users report receiving an error page with the following message: "Event 26 has occurred.
Contact your system administrator."
You need to access the WebRole1 event log.
Which three actions should you perform? Each correct answer presents part of the solution.
A. Run the Enable-AzureWebsiteApplicationDiagnostic PowerShell cmdlet.
B. Update the WebRole1 web.config file.
C. Run the Set-AzureVMDiagnosticsExtensionPowerShell cmdlet.
D. Create a storage account.
E. Update the cloud service definition file and the service configuration file.
F. Enable verbose monitoring.
Answer: D,E,F
Explanation:
step 1 specify the scheduled TransferLogLevelFilter to Verbose in the diagnostics.wadcfg step 2 Update the cloud service definition file and the service configuration file (.cspkg) step 3 best practice is to create a separate storage account for logging diagnostics data
References: http://azure.microsoft.com/en-us/documentation/articles/cloud-services-how-to-monitor/
E. _65503_
F. _65503$
Answer: D
Explanation:
http://www.cisco.com/c/en/us/td/docs/ios/12_2/termserv/configuration/guide/ftersv_c/tcfaap re.html
NEW QUESTION: 3
An engineer has integrated a new DMVPN to link remote offices across the internet using Cisco IOS routers. When connecting to remote sites, pings and voice data appear to flow properly and all tunnel stats seem to show that are up. However, when trying to connect to a remote server using RDP, the connection fails. Which action resolves this issue?
A. Adjust the MTU size within the routers.
B. Replace certificate on the RDP server.
C. Add RDP port to the extended ACL.
D. Change DMVPN timeout values.
Answer: B
NEW QUESTION: 4
You manage a cloud service that has a web application named WebRole1.
WebRole1 writes error messages to the Windows Event Log.
Users report receiving an error page with the following message: "Event 26 has occurred.
Contact your system administrator."
You need to access the WebRole1 event log.
Which three actions should you perform? Each correct answer presents part of the solution.
A. Run the Enable-AzureWebsiteApplicationDiagnostic PowerShell cmdlet.
B. Update the WebRole1 web.config file.
C. Run the Set-AzureVMDiagnosticsExtensionPowerShell cmdlet.
D. Create a storage account.
E. Update the cloud service definition file and the service configuration file.
F. Enable verbose monitoring.
Answer: D,E,F
Explanation:
step 1 specify the scheduled TransferLogLevelFilter to Verbose in the diagnostics.wadcfg step 2 Update the cloud service definition file and the service configuration file (.cspkg) step 3 best practice is to create a separate storage account for logging diagnostics data
References: http://azure.microsoft.com/en-us/documentation/articles/cloud-services-how-to-monitor/
- 350-701 Testing Engine
- RhMSUS Probesfragen
- 302 PDF Testsoftware
- Sharing-and-Visibility-Architect Trainingsunterlagen
- PCNSC Trainingsunterlagen
- C_C4H225_12 Zertifikatsdemo
- H19-436_V1.0 Prüfungsinformationen
- AZ-900-Deutsch Deutsch Prüfung
- VERISME Zertifizierungsprüfung
- H13-624_V5.5 Zertifizierungsfragen
- Principles-of-Management Deutsch
- PDP9 Übungsmaterialien
- SK0-005 Quizfragen Und Antworten
- C_THR95_2405 Online Prüfung
- F1 Examengine
- C-IEE2E-2404 Exam Fragen
- C_TFG61_2211 Vorbereitung
- OmniStudio-Developer Prüfungsaufgaben
- C_THR82_2405 Deutsch
- CWSP-207 Fragenkatalog
- OMG-OCUP2-FOUND100 Schulungsunterlagen
E. _65503_
F. _65503$
Answer: D
Explanation:
http://www.cisco.com/c/en/us/td/docs/ios/12_2/termserv/configuration/guide/ftersv_c/tcfaap re.html
NEW QUESTION: 3
An engineer has integrated a new DMVPN to link remote offices across the internet using Cisco IOS routers. When connecting to remote sites, pings and voice data appear to flow properly and all tunnel stats seem to show that are up. However, when trying to connect to a remote server using RDP, the connection fails. Which action resolves this issue?
A. Adjust the MTU size within the routers.
B. Replace certificate on the RDP server.
C. Add RDP port to the extended ACL.
D. Change DMVPN timeout values.
Answer: B
NEW QUESTION: 4
You manage a cloud service that has a web application named WebRole1.
WebRole1 writes error messages to the Windows Event Log.
Users report receiving an error page with the following message: "Event 26 has occurred.
Contact your system administrator."
You need to access the WebRole1 event log.
Which three actions should you perform? Each correct answer presents part of the solution.
A. Run the Enable-AzureWebsiteApplicationDiagnostic PowerShell cmdlet.
B. Update the WebRole1 web.config file.
C. Run the Set-AzureVMDiagnosticsExtensionPowerShell cmdlet.
D. Create a storage account.
E. Update the cloud service definition file and the service configuration file.
F. Enable verbose monitoring.
Answer: D,E,F
Explanation:
step 1 specify the scheduled TransferLogLevelFilter to Verbose in the diagnostics.wadcfg step 2 Update the cloud service definition file and the service configuration file (.cspkg) step 3 best practice is to create a separate storage account for logging diagnostics data
References: http://azure.microsoft.com/en-us/documentation/articles/cloud-services-how-to-monitor/
65503 .*
E. _65503_
F. _65503$
Answer: D
Explanation:
http://www.cisco.com/c/en/us/td/docs/ios/12_2/termserv/configuration/guide/ftersv_c/tcfaap re.html
NEW QUESTION: 3
An engineer has integrated a new DMVPN to link remote offices across the internet using Cisco IOS routers. When connecting to remote sites, pings and voice data appear to flow properly and all tunnel stats seem to show that are up. However, when trying to connect to a remote server using RDP, the connection fails. Which action resolves this issue?
A. Adjust the MTU size within the routers.
B. Replace certificate on the RDP server.
C. Add RDP port to the extended ACL.
D. Change DMVPN timeout values.
Answer: B
NEW QUESTION: 4
You manage a cloud service that has a web application named WebRole1.
WebRole1 writes error messages to the Windows Event Log.
Users report receiving an error page with the following message: "Event 26 has occurred.
Contact your system administrator."
You need to access the WebRole1 event log.
Which three actions should you perform? Each correct answer presents part of the solution.
A. Run the Enable-AzureWebsiteApplicationDiagnostic PowerShell cmdlet.
B. Update the WebRole1 web.config file.
C. Run the Set-AzureVMDiagnosticsExtensionPowerShell cmdlet.
D. Create a storage account.
E. Update the cloud service definition file and the service configuration file.
F. Enable verbose monitoring.
Answer: D,E,F
Explanation:
step 1 specify the scheduled TransferLogLevelFilter to Verbose in the diagnostics.wadcfg step 2 Update the cloud service definition file and the service configuration file (.cspkg) step 3 best practice is to create a separate storage account for logging diagnostics data
References: http://azure.microsoft.com/en-us/documentation/articles/cloud-services-how-to-monitor/
Proper training for PT0-003 65503 .*
E. _65503_
F. _65503$
Answer: D
Explanation:
http://www.cisco.com/c/en/us/td/docs/ios/12_2/termserv/configuration/guide/ftersv_c/tcfaap re.html
NEW QUESTION: 3
An engineer has integrated a new DMVPN to link remote offices across the internet using Cisco IOS routers. When connecting to remote sites, pings and voice data appear to flow properly and all tunnel stats seem to show that are up. However, when trying to connect to a remote server using RDP, the connection fails. Which action resolves this issue?
A. Adjust the MTU size within the routers.
B. Replace certificate on the RDP server.
C. Add RDP port to the extended ACL.
D. Change DMVPN timeout values.
Answer: B
NEW QUESTION: 4
You manage a cloud service that has a web application named WebRole1.
WebRole1 writes error messages to the Windows Event Log.
Users report receiving an error page with the following message: "Event 26 has occurred.
Contact your system administrator."
You need to access the WebRole1 event log.
Which three actions should you perform? Each correct answer presents part of the solution.
A. Run the Enable-AzureWebsiteApplicationDiagnostic PowerShell cmdlet.
B. Update the WebRole1 web.config file.
C. Run the Set-AzureVMDiagnosticsExtensionPowerShell cmdlet.
D. Create a storage account.
E. Update the cloud service definition file and the service configuration file.
F. Enable verbose monitoring.
Answer: D,E,F
Explanation:
step 1 specify the scheduled TransferLogLevelFilter to Verbose in the diagnostics.wadcfg step 2 Update the cloud service definition file and the service configuration file (.cspkg) step 3 best practice is to create a separate storage account for logging diagnostics data
References: http://azure.microsoft.com/en-us/documentation/articles/cloud-services-how-to-monitor/
E. _65503_
F. _65503$
Answer: D
Explanation:
http://www.cisco.com/c/en/us/td/docs/ios/12_2/termserv/configuration/guide/ftersv_c/tcfaap re.html
NEW QUESTION: 3
An engineer has integrated a new DMVPN to link remote offices across the internet using Cisco IOS routers. When connecting to remote sites, pings and voice data appear to flow properly and all tunnel stats seem to show that are up. However, when trying to connect to a remote server using RDP, the connection fails. Which action resolves this issue?
A. Adjust the MTU size within the routers.
B. Replace certificate on the RDP server.
C. Add RDP port to the extended ACL.
D. Change DMVPN timeout values.
Answer: B
NEW QUESTION: 4
You manage a cloud service that has a web application named WebRole1.
WebRole1 writes error messages to the Windows Event Log.
Users report receiving an error page with the following message: "Event 26 has occurred.
Contact your system administrator."
You need to access the WebRole1 event log.
Which three actions should you perform? Each correct answer presents part of the solution.
A. Run the Enable-AzureWebsiteApplicationDiagnostic PowerShell cmdlet.
B. Update the WebRole1 web.config file.
C. Run the Set-AzureVMDiagnosticsExtensionPowerShell cmdlet.
D. Create a storage account.
E. Update the cloud service definition file and the service configuration file.
F. Enable verbose monitoring.
Answer: D,E,F
Explanation:
step 1 specify the scheduled TransferLogLevelFilter to Verbose in the diagnostics.wadcfg step 2 Update the cloud service definition file and the service configuration file (.cspkg) step 3 best practice is to create a separate storage account for logging diagnostics data
References: http://azure.microsoft.com/en-us/documentation/articles/cloud-services-how-to-monitor/
E. _65503_
F. _65503$
Answer: D
Explanation:
http://www.cisco.com/c/en/us/td/docs/ios/12_2/termserv/configuration/guide/ftersv_c/tcfaap re.html
NEW QUESTION: 3
An engineer has integrated a new DMVPN to link remote offices across the internet using Cisco IOS routers. When connecting to remote sites, pings and voice data appear to flow properly and all tunnel stats seem to show that are up. However, when trying to connect to a remote server using RDP, the connection fails. Which action resolves this issue?
A. Adjust the MTU size within the routers.
B. Replace certificate on the RDP server.
C. Add RDP port to the extended ACL.
D. Change DMVPN timeout values.
Answer: B
NEW QUESTION: 4
You manage a cloud service that has a web application named WebRole1.
WebRole1 writes error messages to the Windows Event Log.
Users report receiving an error page with the following message: "Event 26 has occurred.
Contact your system administrator."
You need to access the WebRole1 event log.
Which three actions should you perform? Each correct answer presents part of the solution.
A. Run the Enable-AzureWebsiteApplicationDiagnostic PowerShell cmdlet.
B. Update the WebRole1 web.config file.
C. Run the Set-AzureVMDiagnosticsExtensionPowerShell cmdlet.
D. Create a storage account.
E. Update the cloud service definition file and the service configuration file.
F. Enable verbose monitoring.
Answer: D,E,F
Explanation:
step 1 specify the scheduled TransferLogLevelFilter to Verbose in the diagnostics.wadcfg step 2 Update the cloud service definition file and the service configuration file (.cspkg) step 3 best practice is to create a separate storage account for logging diagnostics data
References: http://azure.microsoft.com/en-us/documentation/articles/cloud-services-how-to-monitor/
E. _65503_
F. _65503$
Answer: D
Explanation:
http://www.cisco.com/c/en/us/td/docs/ios/12_2/termserv/configuration/guide/ftersv_c/tcfaap re.html
NEW QUESTION: 3
An engineer has integrated a new DMVPN to link remote offices across the internet using Cisco IOS routers. When connecting to remote sites, pings and voice data appear to flow properly and all tunnel stats seem to show that are up. However, when trying to connect to a remote server using RDP, the connection fails. Which action resolves this issue?
A. Adjust the MTU size within the routers.
B. Replace certificate on the RDP server.
C. Add RDP port to the extended ACL.
D. Change DMVPN timeout values.
Answer: B
NEW QUESTION: 4
You manage a cloud service that has a web application named WebRole1.
WebRole1 writes error messages to the Windows Event Log.
Users report receiving an error page with the following message: "Event 26 has occurred.
Contact your system administrator."
You need to access the WebRole1 event log.
Which three actions should you perform? Each correct answer presents part of the solution.
A. Run the Enable-AzureWebsiteApplicationDiagnostic PowerShell cmdlet.
B. Update the WebRole1 web.config file.
C. Run the Set-AzureVMDiagnosticsExtensionPowerShell cmdlet.
D. Create a storage account.
E. Update the cloud service definition file and the service configuration file.
F. Enable verbose monitoring.
Answer: D,E,F
Explanation:
step 1 specify the scheduled TransferLogLevelFilter to Verbose in the diagnostics.wadcfg step 2 Update the cloud service definition file and the service configuration file (.cspkg) step 3 best practice is to create a separate storage account for logging diagnostics data
References: http://azure.microsoft.com/en-us/documentation/articles/cloud-services-how-to-monitor/
E. _65503_
F. _65503$
Answer: D
Explanation:
http://www.cisco.com/c/en/us/td/docs/ios/12_2/termserv/configuration/guide/ftersv_c/tcfaap re.html
NEW QUESTION: 3
An engineer has integrated a new DMVPN to link remote offices across the internet using Cisco IOS routers. When connecting to remote sites, pings and voice data appear to flow properly and all tunnel stats seem to show that are up. However, when trying to connect to a remote server using RDP, the connection fails. Which action resolves this issue?
A. Adjust the MTU size within the routers.
B. Replace certificate on the RDP server.
C. Add RDP port to the extended ACL.
D. Change DMVPN timeout values.
Answer: B
NEW QUESTION: 4
You manage a cloud service that has a web application named WebRole1.
WebRole1 writes error messages to the Windows Event Log.
Users report receiving an error page with the following message: "Event 26 has occurred.
Contact your system administrator."
You need to access the WebRole1 event log.
Which three actions should you perform? Each correct answer presents part of the solution.
A. Run the Enable-AzureWebsiteApplicationDiagnostic PowerShell cmdlet.
B. Update the WebRole1 web.config file.
C. Run the Set-AzureVMDiagnosticsExtensionPowerShell cmdlet.
D. Create a storage account.
E. Update the cloud service definition file and the service configuration file.
F. Enable verbose monitoring.
Answer: D,E,F
Explanation:
step 1 specify the scheduled TransferLogLevelFilter to Verbose in the diagnostics.wadcfg step 2 Update the cloud service definition file and the service configuration file (.cspkg) step 3 best practice is to create a separate storage account for logging diagnostics data
References: http://azure.microsoft.com/en-us/documentation/articles/cloud-services-how-to-monitor/
E. _65503_
F. _65503$
Answer: D
Explanation:
http://www.cisco.com/c/en/us/td/docs/ios/12_2/termserv/configuration/guide/ftersv_c/tcfaap re.html
NEW QUESTION: 3
An engineer has integrated a new DMVPN to link remote offices across the internet using Cisco IOS routers. When connecting to remote sites, pings and voice data appear to flow properly and all tunnel stats seem to show that are up. However, when trying to connect to a remote server using RDP, the connection fails. Which action resolves this issue?
A. Adjust the MTU size within the routers.
B. Replace certificate on the RDP server.
C. Add RDP port to the extended ACL.
D. Change DMVPN timeout values.
Answer: B
NEW QUESTION: 4
You manage a cloud service that has a web application named WebRole1.
WebRole1 writes error messages to the Windows Event Log.
Users report receiving an error page with the following message: "Event 26 has occurred.
Contact your system administrator."
You need to access the WebRole1 event log.
Which three actions should you perform? Each correct answer presents part of the solution.
A. Run the Enable-AzureWebsiteApplicationDiagnostic PowerShell cmdlet.
B. Update the WebRole1 web.config file.
C. Run the Set-AzureVMDiagnosticsExtensionPowerShell cmdlet.
D. Create a storage account.
E. Update the cloud service definition file and the service configuration file.
F. Enable verbose monitoring.
Answer: D,E,F
Explanation:
step 1 specify the scheduled TransferLogLevelFilter to Verbose in the diagnostics.wadcfg step 2 Update the cloud service definition file and the service configuration file (.cspkg) step 3 best practice is to create a separate storage account for logging diagnostics data
References: http://azure.microsoft.com/en-us/documentation/articles/cloud-services-how-to-monitor/
E. _65503_
F. _65503$
Answer: D
Explanation:
http://www.cisco.com/c/en/us/td/docs/ios/12_2/termserv/configuration/guide/ftersv_c/tcfaap re.html
NEW QUESTION: 3
An engineer has integrated a new DMVPN to link remote offices across the internet using Cisco IOS routers. When connecting to remote sites, pings and voice data appear to flow properly and all tunnel stats seem to show that are up. However, when trying to connect to a remote server using RDP, the connection fails. Which action resolves this issue?
A. Adjust the MTU size within the routers.
B. Replace certificate on the RDP server.
C. Add RDP port to the extended ACL.
D. Change DMVPN timeout values.
Answer: B
NEW QUESTION: 4
You manage a cloud service that has a web application named WebRole1.
WebRole1 writes error messages to the Windows Event Log.
Users report receiving an error page with the following message: "Event 26 has occurred.
Contact your system administrator."
You need to access the WebRole1 event log.
Which three actions should you perform? Each correct answer presents part of the solution.
A. Run the Enable-AzureWebsiteApplicationDiagnostic PowerShell cmdlet.
B. Update the WebRole1 web.config file.
C. Run the Set-AzureVMDiagnosticsExtensionPowerShell cmdlet.
D. Create a storage account.
E. Update the cloud service definition file and the service configuration file.
F. Enable verbose monitoring.
Answer: D,E,F
Explanation:
step 1 specify the scheduled TransferLogLevelFilter to Verbose in the diagnostics.wadcfg step 2 Update the cloud service definition file and the service configuration file (.cspkg) step 3 best practice is to create a separate storage account for logging diagnostics data
References: http://azure.microsoft.com/en-us/documentation/articles/cloud-services-how-to-monitor/
Don't settle for sideline PT0-003 65503 .*
E. _65503_
F. _65503$
Answer: D
Explanation:
http://www.cisco.com/c/en/us/td/docs/ios/12_2/termserv/configuration/guide/ftersv_c/tcfaap re.html
NEW QUESTION: 3
An engineer has integrated a new DMVPN to link remote offices across the internet using Cisco IOS routers. When connecting to remote sites, pings and voice data appear to flow properly and all tunnel stats seem to show that are up. However, when trying to connect to a remote server using RDP, the connection fails. Which action resolves this issue?
A. Adjust the MTU size within the routers.
B. Replace certificate on the RDP server.
C. Add RDP port to the extended ACL.
D. Change DMVPN timeout values.
Answer: B
NEW QUESTION: 4
You manage a cloud service that has a web application named WebRole1.
WebRole1 writes error messages to the Windows Event Log.
Users report receiving an error page with the following message: "Event 26 has occurred.
Contact your system administrator."
You need to access the WebRole1 event log.
Which three actions should you perform? Each correct answer presents part of the solution.
A. Run the Enable-AzureWebsiteApplicationDiagnostic PowerShell cmdlet.
B. Update the WebRole1 web.config file.
C. Run the Set-AzureVMDiagnosticsExtensionPowerShell cmdlet.
D. Create a storage account.
E. Update the cloud service definition file and the service configuration file.
F. Enable verbose monitoring.
Answer: D,E,F
Explanation:
step 1 specify the scheduled TransferLogLevelFilter to Verbose in the diagnostics.wadcfg step 2 Update the cloud service definition file and the service configuration file (.cspkg) step 3 best practice is to create a separate storage account for logging diagnostics data
References: http://azure.microsoft.com/en-us/documentation/articles/cloud-services-how-to-monitor/
E. _65503_
F. _65503$
Answer: D
Explanation:
http://www.cisco.com/c/en/us/td/docs/ios/12_2/termserv/configuration/guide/ftersv_c/tcfaap re.html
NEW QUESTION: 3
An engineer has integrated a new DMVPN to link remote offices across the internet using Cisco IOS routers. When connecting to remote sites, pings and voice data appear to flow properly and all tunnel stats seem to show that are up. However, when trying to connect to a remote server using RDP, the connection fails. Which action resolves this issue?
A. Adjust the MTU size within the routers.
B. Replace certificate on the RDP server.
C. Add RDP port to the extended ACL.
D. Change DMVPN timeout values.
Answer: B
NEW QUESTION: 4
You manage a cloud service that has a web application named WebRole1.
WebRole1 writes error messages to the Windows Event Log.
Users report receiving an error page with the following message: "Event 26 has occurred.
Contact your system administrator."
You need to access the WebRole1 event log.
Which three actions should you perform? Each correct answer presents part of the solution.
A. Run the Enable-AzureWebsiteApplicationDiagnostic PowerShell cmdlet.
B. Update the WebRole1 web.config file.
C. Run the Set-AzureVMDiagnosticsExtensionPowerShell cmdlet.
D. Create a storage account.
E. Update the cloud service definition file and the service configuration file.
F. Enable verbose monitoring.
Answer: D,E,F
Explanation:
step 1 specify the scheduled TransferLogLevelFilter to Verbose in the diagnostics.wadcfg step 2 Update the cloud service definition file and the service configuration file (.cspkg) step 3 best practice is to create a separate storage account for logging diagnostics data
References: http://azure.microsoft.com/en-us/documentation/articles/cloud-services-how-to-monitor/
E. _65503_
F. _65503$
Answer: D
Explanation:
http://www.cisco.com/c/en/us/td/docs/ios/12_2/termserv/configuration/guide/ftersv_c/tcfaap re.html
NEW QUESTION: 3
An engineer has integrated a new DMVPN to link remote offices across the internet using Cisco IOS routers. When connecting to remote sites, pings and voice data appear to flow properly and all tunnel stats seem to show that are up. However, when trying to connect to a remote server using RDP, the connection fails. Which action resolves this issue?
A. Adjust the MTU size within the routers.
B. Replace certificate on the RDP server.
C. Add RDP port to the extended ACL.
D. Change DMVPN timeout values.
Answer: B
NEW QUESTION: 4
You manage a cloud service that has a web application named WebRole1.
WebRole1 writes error messages to the Windows Event Log.
Users report receiving an error page with the following message: "Event 26 has occurred.
Contact your system administrator."
You need to access the WebRole1 event log.
Which three actions should you perform? Each correct answer presents part of the solution.
A. Run the Enable-AzureWebsiteApplicationDiagnostic PowerShell cmdlet.
B. Update the WebRole1 web.config file.
C. Run the Set-AzureVMDiagnosticsExtensionPowerShell cmdlet.
D. Create a storage account.
E. Update the cloud service definition file and the service configuration file.
F. Enable verbose monitoring.
Answer: D,E,F
Explanation:
step 1 specify the scheduled TransferLogLevelFilter to Verbose in the diagnostics.wadcfg step 2 Update the cloud service definition file and the service configuration file (.cspkg) step 3 best practice is to create a separate storage account for logging diagnostics data
References: http://azure.microsoft.com/en-us/documentation/articles/cloud-services-how-to-monitor/
E. _65503_
F. _65503$
Answer: D
Explanation:
http://www.cisco.com/c/en/us/td/docs/ios/12_2/termserv/configuration/guide/ftersv_c/tcfaap re.html
NEW QUESTION: 3
An engineer has integrated a new DMVPN to link remote offices across the internet using Cisco IOS routers. When connecting to remote sites, pings and voice data appear to flow properly and all tunnel stats seem to show that are up. However, when trying to connect to a remote server using RDP, the connection fails. Which action resolves this issue?
A. Adjust the MTU size within the routers.
B. Replace certificate on the RDP server.
C. Add RDP port to the extended ACL.
D. Change DMVPN timeout values.
Answer: B
NEW QUESTION: 4
You manage a cloud service that has a web application named WebRole1.
WebRole1 writes error messages to the Windows Event Log.
Users report receiving an error page with the following message: "Event 26 has occurred.
Contact your system administrator."
You need to access the WebRole1 event log.
Which three actions should you perform? Each correct answer presents part of the solution.
A. Run the Enable-AzureWebsiteApplicationDiagnostic PowerShell cmdlet.
B. Update the WebRole1 web.config file.
C. Run the Set-AzureVMDiagnosticsExtensionPowerShell cmdlet.
D. Create a storage account.
E. Update the cloud service definition file and the service configuration file.
F. Enable verbose monitoring.
Answer: D,E,F
Explanation:
step 1 specify the scheduled TransferLogLevelFilter to Verbose in the diagnostics.wadcfg step 2 Update the cloud service definition file and the service configuration file (.cspkg) step 3 best practice is to create a separate storage account for logging diagnostics data
References: http://azure.microsoft.com/en-us/documentation/articles/cloud-services-how-to-monitor/
E. _65503_
F. _65503$
Answer: D
Explanation:
http://www.cisco.com/c/en/us/td/docs/ios/12_2/termserv/configuration/guide/ftersv_c/tcfaap re.html
NEW QUESTION: 3
An engineer has integrated a new DMVPN to link remote offices across the internet using Cisco IOS routers. When connecting to remote sites, pings and voice data appear to flow properly and all tunnel stats seem to show that are up. However, when trying to connect to a remote server using RDP, the connection fails. Which action resolves this issue?
A. Adjust the MTU size within the routers.
B. Replace certificate on the RDP server.
C. Add RDP port to the extended ACL.
D. Change DMVPN timeout values.
Answer: B
NEW QUESTION: 4
You manage a cloud service that has a web application named WebRole1.
WebRole1 writes error messages to the Windows Event Log.
Users report receiving an error page with the following message: "Event 26 has occurred.
Contact your system administrator."
You need to access the WebRole1 event log.
Which three actions should you perform? Each correct answer presents part of the solution.
A. Run the Enable-AzureWebsiteApplicationDiagnostic PowerShell cmdlet.
B. Update the WebRole1 web.config file.
C. Run the Set-AzureVMDiagnosticsExtensionPowerShell cmdlet.
D. Create a storage account.
E. Update the cloud service definition file and the service configuration file.
F. Enable verbose monitoring.
Answer: D,E,F
Explanation:
step 1 specify the scheduled TransferLogLevelFilter to Verbose in the diagnostics.wadcfg step 2 Update the cloud service definition file and the service configuration file (.cspkg) step 3 best practice is to create a separate storage account for logging diagnostics data
References: http://azure.microsoft.com/en-us/documentation/articles/cloud-services-how-to-monitor/