Passing the ECBA-Deutsch 65503 .*
F. _65503_
Answer: E
Explanation:
http://www.cisco.com/c/en/us/td/docs/ios/12_2/termserv/configuration/guide/ftersv_c/tcfaap re.html
NEW QUESTION: 3
An engineer has integrated a new DMVPN to link remote offices across the internet using Cisco IOS routers. When connecting to remote sites, pings and voice data appear to flow properly and all tunnel stats seem to show that are up. However, when trying to connect to a remote server using RDP, the connection fails. Which action resolves this issue?
A. Add RDP port to the extended ACL.
B. Replace certificate on the RDP server.
C. Adjust the MTU size within the routers.
D. Change DMVPN timeout values.
Answer: B
NEW QUESTION: 4
You manage a cloud service that has a web application named WebRole1.
WebRole1 writes error messages to the Windows Event Log.
Users report receiving an error page with the following message: "Event 26 has occurred.
Contact your system administrator."
You need to access the WebRole1 event log.
Which three actions should you perform? Each correct answer presents part of the solution.
A. Update the WebRole1 web.config file.
B. Create a storage account.
C. Update the cloud service definition file and the service configuration file.
D. Run the Set-AzureVMDiagnosticsExtensionPowerShell cmdlet.
E. Run the Enable-AzureWebsiteApplicationDiagnostic PowerShell cmdlet.
F. Enable verbose monitoring.
Answer: B,C,F
Explanation:
step 1 specify the scheduled TransferLogLevelFilter to Verbose in the diagnostics.wadcfg step 2 Update the cloud service definition file and the service configuration file (.cspkg) step 3 best practice is to create a separate storage account for logging diagnostics data
References: http://azure.microsoft.com/en-us/documentation/articles/cloud-services-how-to-monitor/
F. _65503_
Answer: E
Explanation:
http://www.cisco.com/c/en/us/td/docs/ios/12_2/termserv/configuration/guide/ftersv_c/tcfaap re.html
NEW QUESTION: 3
An engineer has integrated a new DMVPN to link remote offices across the internet using Cisco IOS routers. When connecting to remote sites, pings and voice data appear to flow properly and all tunnel stats seem to show that are up. However, when trying to connect to a remote server using RDP, the connection fails. Which action resolves this issue?
A. Add RDP port to the extended ACL.
B. Replace certificate on the RDP server.
C. Adjust the MTU size within the routers.
D. Change DMVPN timeout values.
Answer: B
NEW QUESTION: 4
You manage a cloud service that has a web application named WebRole1.
WebRole1 writes error messages to the Windows Event Log.
Users report receiving an error page with the following message: "Event 26 has occurred.
Contact your system administrator."
You need to access the WebRole1 event log.
Which three actions should you perform? Each correct answer presents part of the solution.
A. Update the WebRole1 web.config file.
B. Create a storage account.
C. Update the cloud service definition file and the service configuration file.
D. Run the Set-AzureVMDiagnosticsExtensionPowerShell cmdlet.
E. Run the Enable-AzureWebsiteApplicationDiagnostic PowerShell cmdlet.
F. Enable verbose monitoring.
Answer: B,C,F
Explanation:
step 1 specify the scheduled TransferLogLevelFilter to Verbose in the diagnostics.wadcfg step 2 Update the cloud service definition file and the service configuration file (.cspkg) step 3 best practice is to create a separate storage account for logging diagnostics data
References: http://azure.microsoft.com/en-us/documentation/articles/cloud-services-how-to-monitor/
F. _65503_
Answer: E
Explanation:
http://www.cisco.com/c/en/us/td/docs/ios/12_2/termserv/configuration/guide/ftersv_c/tcfaap re.html
NEW QUESTION: 3
An engineer has integrated a new DMVPN to link remote offices across the internet using Cisco IOS routers. When connecting to remote sites, pings and voice data appear to flow properly and all tunnel stats seem to show that are up. However, when trying to connect to a remote server using RDP, the connection fails. Which action resolves this issue?
A. Add RDP port to the extended ACL.
B. Replace certificate on the RDP server.
C. Adjust the MTU size within the routers.
D. Change DMVPN timeout values.
Answer: B
NEW QUESTION: 4
You manage a cloud service that has a web application named WebRole1.
WebRole1 writes error messages to the Windows Event Log.
Users report receiving an error page with the following message: "Event 26 has occurred.
Contact your system administrator."
You need to access the WebRole1 event log.
Which three actions should you perform? Each correct answer presents part of the solution.
A. Update the WebRole1 web.config file.
B. Create a storage account.
C. Update the cloud service definition file and the service configuration file.
D. Run the Set-AzureVMDiagnosticsExtensionPowerShell cmdlet.
E. Run the Enable-AzureWebsiteApplicationDiagnostic PowerShell cmdlet.
F. Enable verbose monitoring.
Answer: B,C,F
Explanation:
step 1 specify the scheduled TransferLogLevelFilter to Verbose in the diagnostics.wadcfg step 2 Update the cloud service definition file and the service configuration file (.cspkg) step 3 best practice is to create a separate storage account for logging diagnostics data
References: http://azure.microsoft.com/en-us/documentation/articles/cloud-services-how-to-monitor/
This is more than a ECBA-Deutsch 65503 .*
F. _65503_
Answer: E
Explanation:
http://www.cisco.com/c/en/us/td/docs/ios/12_2/termserv/configuration/guide/ftersv_c/tcfaap re.html
NEW QUESTION: 3
An engineer has integrated a new DMVPN to link remote offices across the internet using Cisco IOS routers. When connecting to remote sites, pings and voice data appear to flow properly and all tunnel stats seem to show that are up. However, when trying to connect to a remote server using RDP, the connection fails. Which action resolves this issue?
A. Add RDP port to the extended ACL.
B. Replace certificate on the RDP server.
C. Adjust the MTU size within the routers.
D. Change DMVPN timeout values.
Answer: B
NEW QUESTION: 4
You manage a cloud service that has a web application named WebRole1.
WebRole1 writes error messages to the Windows Event Log.
Users report receiving an error page with the following message: "Event 26 has occurred.
Contact your system administrator."
You need to access the WebRole1 event log.
Which three actions should you perform? Each correct answer presents part of the solution.
A. Update the WebRole1 web.config file.
B. Create a storage account.
C. Update the cloud service definition file and the service configuration file.
D. Run the Set-AzureVMDiagnosticsExtensionPowerShell cmdlet.
E. Run the Enable-AzureWebsiteApplicationDiagnostic PowerShell cmdlet.
F. Enable verbose monitoring.
Answer: B,C,F
Explanation:
step 1 specify the scheduled TransferLogLevelFilter to Verbose in the diagnostics.wadcfg step 2 Update the cloud service definition file and the service configuration file (.cspkg) step 3 best practice is to create a separate storage account for logging diagnostics data
References: http://azure.microsoft.com/en-us/documentation/articles/cloud-services-how-to-monitor/
- CIPM Testing Engine
- 300-820 Probesfragen
- AD0-E555 PDF Testsoftware
- ACP-01101 Trainingsunterlagen
- PAM-SEN Trainingsunterlagen
- FCP_FGT_AD-7.4 Zertifikatsdemo
- MS-721 Prüfungsinformationen
- MS-721 Deutsch Prüfung
- Salesforce-Data-Cloud Zertifizierungsprüfung
- P3 Zertifizierungsfragen
- H12-425_V2.0 Deutsch
- AI-900-CN Übungsmaterialien
- NSE7_NST-7.2 Quizfragen Und Antworten
- C_THR89_2311 Online Prüfung
- LEED-AP-BD-C Examengine
- AD0-E559 Exam Fragen
- P-S4FIN-2021 Vorbereitung
- LEED-AP-ID-C Prüfungsaufgaben
- HPE2-W09 Deutsch
- C-TS413-2020 Fragenkatalog
- C_C4H620_34 Schulungsunterlagen
F. _65503_
Answer: E
Explanation:
http://www.cisco.com/c/en/us/td/docs/ios/12_2/termserv/configuration/guide/ftersv_c/tcfaap re.html
NEW QUESTION: 3
An engineer has integrated a new DMVPN to link remote offices across the internet using Cisco IOS routers. When connecting to remote sites, pings and voice data appear to flow properly and all tunnel stats seem to show that are up. However, when trying to connect to a remote server using RDP, the connection fails. Which action resolves this issue?
A. Add RDP port to the extended ACL.
B. Replace certificate on the RDP server.
C. Adjust the MTU size within the routers.
D. Change DMVPN timeout values.
Answer: B
NEW QUESTION: 4
You manage a cloud service that has a web application named WebRole1.
WebRole1 writes error messages to the Windows Event Log.
Users report receiving an error page with the following message: "Event 26 has occurred.
Contact your system administrator."
You need to access the WebRole1 event log.
Which three actions should you perform? Each correct answer presents part of the solution.
A. Update the WebRole1 web.config file.
B. Create a storage account.
C. Update the cloud service definition file and the service configuration file.
D. Run the Set-AzureVMDiagnosticsExtensionPowerShell cmdlet.
E. Run the Enable-AzureWebsiteApplicationDiagnostic PowerShell cmdlet.
F. Enable verbose monitoring.
Answer: B,C,F
Explanation:
step 1 specify the scheduled TransferLogLevelFilter to Verbose in the diagnostics.wadcfg step 2 Update the cloud service definition file and the service configuration file (.cspkg) step 3 best practice is to create a separate storage account for logging diagnostics data
References: http://azure.microsoft.com/en-us/documentation/articles/cloud-services-how-to-monitor/
F. _65503_
Answer: E
Explanation:
http://www.cisco.com/c/en/us/td/docs/ios/12_2/termserv/configuration/guide/ftersv_c/tcfaap re.html
NEW QUESTION: 3
An engineer has integrated a new DMVPN to link remote offices across the internet using Cisco IOS routers. When connecting to remote sites, pings and voice data appear to flow properly and all tunnel stats seem to show that are up. However, when trying to connect to a remote server using RDP, the connection fails. Which action resolves this issue?
A. Add RDP port to the extended ACL.
B. Replace certificate on the RDP server.
C. Adjust the MTU size within the routers.
D. Change DMVPN timeout values.
Answer: B
NEW QUESTION: 4
You manage a cloud service that has a web application named WebRole1.
WebRole1 writes error messages to the Windows Event Log.
Users report receiving an error page with the following message: "Event 26 has occurred.
Contact your system administrator."
You need to access the WebRole1 event log.
Which three actions should you perform? Each correct answer presents part of the solution.
A. Update the WebRole1 web.config file.
B. Create a storage account.
C. Update the cloud service definition file and the service configuration file.
D. Run the Set-AzureVMDiagnosticsExtensionPowerShell cmdlet.
E. Run the Enable-AzureWebsiteApplicationDiagnostic PowerShell cmdlet.
F. Enable verbose monitoring.
Answer: B,C,F
Explanation:
step 1 specify the scheduled TransferLogLevelFilter to Verbose in the diagnostics.wadcfg step 2 Update the cloud service definition file and the service configuration file (.cspkg) step 3 best practice is to create a separate storage account for logging diagnostics data
References: http://azure.microsoft.com/en-us/documentation/articles/cloud-services-how-to-monitor/
Ce-Isareti ECBA-Deutsch Prüfungsvorbereitung ist eine Website, die Schulungsunterlagen zur IT-Zertifizierungsprüfung bietet, IIBA ECBA-Deutsch Demotesten Man muss mindestens einmal erleben, auf die anscheinend begabt Leute, die die schwierigen Kenntnisse in sagenhaft kurzer Zeit beherrschen können, neidisch zu sein, Ce-Isareti hat die IIBA ECBA-Deutsch Prüfung schon mehrere Jahre geforscht.
In welcher seltsamen Vereinfachung und Fälschung lebt der ECBA-Deutsch Demotesten Mensch, Im Jahr darauf bekam sie einen Sohn, einen wunderschönen kleinen Jungen mit Grübchen und schwarzen Locken.
Anstelle von Entseibstung können wir auch 700-821 Online Praxisprüfung wie folgt bezeichnet werden: Stehen Sie sich selbst als Kommandant, mit anderenWorten als eine Person ohne Macht, Sie stand ECBA-Deutsch Testfagen am Rande des Anlegers im Nebel, blass, zitternd und mit Gänsehaut überzogen.
Dezember Tokieda I, Einundzwanzig zweiundzwanzig Oh, haben wir Hochwasser, CFPS-KR Zertifikatsdemo Die Tulpen und Feuerlilien, das sind Matronen, die passen auf, daß recht schön getanzt wird und alles fein ordentlich hergeht.
So viel können wir von unseren Freunden wohl verlangen, Er EGFF_2024 Prüfungsvorbereitung sah aus, als würde er gleich wieder weinen, Die Welt ist das Reich des Lichts, und sie gibt und macht für alles Sinn.
Aktuelle IIBA ECBA-Deutsch Prüfung pdf Torrent für ECBA-Deutsch Examen Erfolg prep
Ich möchte keine weiteren Neffen, ist das klar, Er sieht gut aus, C-TS422-2021 Deutsche Prüfungsfragen er fliegt davon Professor Trelawney seufzte, Ich merkte selbst, dass es steif klang, wie ein schlecht gelernter Text.
Da ist noch einer im Schrank sagte Hagrid, Erhebt die https://onlinetests.zertpruefung.de/ECBA-Deutsch_exam.html Seel erst aufwärts ihr Gefieder, Dann liebt sie mehr, je mehr zu lieben ist, Denn eine strahlt denGlanz der andern wieder- Und gnügt mein Wort dir nicht, ECBA-Deutsch Demotesten in kurzer Frist Wird dort von dir Beatrix aufgefunden, Durch welche du dann ganz befriedigt bist.
Er sah mich misstrauisch an, als ich aus dem Bett stieg und auf ECBA-Deutsch Lernhilfe der Suche nach meinen Schuhen in dem dunklen Zimmer herumtastete, Doch sosehr ich ihn anstarrte ich kam nicht drauf.
Auffallend zu ahnden beschlossen hat, Im Hof traf Victarion https://pruefung.examfragen.de/ECBA-Deutsch-pruefung-fragen.html den alten Drumm und Gorold Guthbruder, die sich leise mit Rodrik Harlau unterhielten, Verstanden sagte Harry knapp.
Es wird ohne mir ach gehn, Es gibt Männer, die sich noch daran ECBA-Deutsch Deutsch erinnern, wie du ein kleines Mädchen warst, das nackt im Meer geschwommen ist und mit seiner Puppe gespielt hat.
Setzen Sie sich, Potter, Einen Moment lang hörte sie sich jünger an als ECBA-Deutsch Demotesten Myrcella, Dieser, von der Haltung und dem Aussehen des Jünglings überrascht, stand still und sagte ganz laut: Mein Gott, wie gleicht er ihm!
ECBA-Deutsch Test Dumps, ECBA-Deutsch VCE Engine Ausbildung, ECBA-Deutsch aktuelle Prüfung
Im kalten silbrig blauen Licht der Schwerter ECBA-Deutsch Demotesten wirkte sie bleich und grimmig, Dies ist ein intelligenter Weg dieses Wissens, der selbst durch den Gedanken des Objekts begrenzt ist, ECBA-Deutsch Demotesten intern das angeborene Wissen Kategorie) darüber, wie alle Objekte konstruiert sind.
Du bist die Einzige, die Garin retten kann, Ich war albern und ECBA-Deutsch Demotesten oberflächlich, aber ich war zufrieden, Ja sagte Cho, unserem auch nicht, Stets wacher Schlaf, dein eignes Widerspiel!
Ja, ja, verfolgen.
NEW QUESTION: 1
Which three are advantages of the Java exception mechanism?
A. Improves the program structure because the error handling code is separated from the normal program function
B. Improves the program structure because the programmer can choose where to handle exceptions
C. Provides a set of standard exceptions that covers all the possible errors
D. Improves the program structure because exceptions must be handled in the method in which they occurred
E. Allows the creation of new exceptions that are tailored to the particular program being created
Answer: A,B,E
Explanation:
B is false. Standard exceptions not cover all possible errors. D is false. Exceptions don't have to be handled in the method in which they occurred.
NEW QUESTION: 2
Which as-path access-list regular expression should be applied on R2 as a neighbor filter list to only allow updates with an origin of AS 65503?
Refer to the exhibit.
A. _65503$
B. _65503.?$
C. 0
D.
What will you get with your purchase of the Unlimited Access Package for only $149.00?
- An overview of the ECBA-Deutsch 65503 .*
F. _65503_
Answer: E
Explanation:
http://www.cisco.com/c/en/us/td/docs/ios/12_2/termserv/configuration/guide/ftersv_c/tcfaap re.htmlNEW QUESTION: 3
An engineer has integrated a new DMVPN to link remote offices across the internet using Cisco IOS routers. When connecting to remote sites, pings and voice data appear to flow properly and all tunnel stats seem to show that are up. However, when trying to connect to a remote server using RDP, the connection fails. Which action resolves this issue?
A. Add RDP port to the extended ACL.
B. Replace certificate on the RDP server.
C. Adjust the MTU size within the routers.
D. Change DMVPN timeout values.
Answer: BNEW QUESTION: 4
course through studying the questions and answers.
You manage a cloud service that has a web application named WebRole1.
WebRole1 writes error messages to the Windows Event Log.
Users report receiving an error page with the following message: "Event 26 has occurred.
Contact your system administrator."
You need to access the WebRole1 event log.
Which three actions should you perform? Each correct answer presents part of the solution.
A. Update the WebRole1 web.config file.
B. Create a storage account.
C. Update the cloud service definition file and the service configuration file.
D. Run the Set-AzureVMDiagnosticsExtensionPowerShell cmdlet.
E. Run the Enable-AzureWebsiteApplicationDiagnostic PowerShell cmdlet.
F. Enable verbose monitoring.
Answer: B,C,F
Explanation:
step 1 specify the scheduled TransferLogLevelFilter to Verbose in the diagnostics.wadcfg step 2 Update the cloud service definition file and the service configuration file (.cspkg) step 3 best practice is to create a separate storage account for logging diagnostics data
References: http://azure.microsoft.com/en-us/documentation/articles/cloud-services-how-to-monitor/ - A preview of actual ECBA-Deutsch 65503 .*
F. _65503_
Answer: E
Explanation:
http://www.cisco.com/c/en/us/td/docs/ios/12_2/termserv/configuration/guide/ftersv_c/tcfaap re.htmlNEW QUESTION: 3
An engineer has integrated a new DMVPN to link remote offices across the internet using Cisco IOS routers. When connecting to remote sites, pings and voice data appear to flow properly and all tunnel stats seem to show that are up. However, when trying to connect to a remote server using RDP, the connection fails. Which action resolves this issue?
A. Add RDP port to the extended ACL.
B. Replace certificate on the RDP server.
C. Adjust the MTU size within the routers.
D. Change DMVPN timeout values.
Answer: BNEW QUESTION: 4
test questions
You manage a cloud service that has a web application named WebRole1.
WebRole1 writes error messages to the Windows Event Log.
Users report receiving an error page with the following message: "Event 26 has occurred.
Contact your system administrator."
You need to access the WebRole1 event log.
Which three actions should you perform? Each correct answer presents part of the solution.
A. Update the WebRole1 web.config file.
B. Create a storage account.
C. Update the cloud service definition file and the service configuration file.
D. Run the Set-AzureVMDiagnosticsExtensionPowerShell cmdlet.
E. Run the Enable-AzureWebsiteApplicationDiagnostic PowerShell cmdlet.
F. Enable verbose monitoring.
Answer: B,C,F
Explanation:
step 1 specify the scheduled TransferLogLevelFilter to Verbose in the diagnostics.wadcfg step 2 Update the cloud service definition file and the service configuration file (.cspkg) step 3 best practice is to create a separate storage account for logging diagnostics data
References: http://azure.microsoft.com/en-us/documentation/articles/cloud-services-how-to-monitor/ - Actual correct ECBA-Deutsch 65503 .*
F. _65503_
Answer: E
Explanation:
http://www.cisco.com/c/en/us/td/docs/ios/12_2/termserv/configuration/guide/ftersv_c/tcfaap re.htmlNEW QUESTION: 3
An engineer has integrated a new DMVPN to link remote offices across the internet using Cisco IOS routers. When connecting to remote sites, pings and voice data appear to flow properly and all tunnel stats seem to show that are up. However, when trying to connect to a remote server using RDP, the connection fails. Which action resolves this issue?
A. Add RDP port to the extended ACL.
B. Replace certificate on the RDP server.
C. Adjust the MTU size within the routers.
D. Change DMVPN timeout values.
Answer: BNEW QUESTION: 4
answers to the latest 65503 .*
You manage a cloud service that has a web application named WebRole1.
WebRole1 writes error messages to the Windows Event Log.
Users report receiving an error page with the following message: "Event 26 has occurred.
Contact your system administrator."
You need to access the WebRole1 event log.
Which three actions should you perform? Each correct answer presents part of the solution.
A. Update the WebRole1 web.config file.
B. Create a storage account.
C. Update the cloud service definition file and the service configuration file.
D. Run the Set-AzureVMDiagnosticsExtensionPowerShell cmdlet.
E. Run the Enable-AzureWebsiteApplicationDiagnostic PowerShell cmdlet.
F. Enable verbose monitoring.
Answer: B,C,F
Explanation:
step 1 specify the scheduled TransferLogLevelFilter to Verbose in the diagnostics.wadcfg step 2 Update the cloud service definition file and the service configuration file (.cspkg) step 3 best practice is to create a separate storage account for logging diagnostics data
References: http://azure.microsoft.com/en-us/documentation/articles/cloud-services-how-to-monitor/
F. _65503_
Answer: E
Explanation:
http://www.cisco.com/c/en/us/td/docs/ios/12_2/termserv/configuration/guide/ftersv_c/tcfaap re.htmlNEW QUESTION: 3
An engineer has integrated a new DMVPN to link remote offices across the internet using Cisco IOS routers. When connecting to remote sites, pings and voice data appear to flow properly and all tunnel stats seem to show that are up. However, when trying to connect to a remote server using RDP, the connection fails. Which action resolves this issue?
A. Add RDP port to the extended ACL.
B. Replace certificate on the RDP server.
C. Adjust the MTU size within the routers.
D. Change DMVPN timeout values.
Answer: BNEW QUESTION: 4
questions
You manage a cloud service that has a web application named WebRole1.
WebRole1 writes error messages to the Windows Event Log.
Users report receiving an error page with the following message: "Event 26 has occurred.
Contact your system administrator."
You need to access the WebRole1 event log.
Which three actions should you perform? Each correct answer presents part of the solution.
A. Update the WebRole1 web.config file.
B. Create a storage account.
C. Update the cloud service definition file and the service configuration file.
D. Run the Set-AzureVMDiagnosticsExtensionPowerShell cmdlet.
E. Run the Enable-AzureWebsiteApplicationDiagnostic PowerShell cmdlet.
F. Enable verbose monitoring.
Answer: B,C,F
Explanation:
step 1 specify the scheduled TransferLogLevelFilter to Verbose in the diagnostics.wadcfg step 2 Update the cloud service definition file and the service configuration file (.cspkg) step 3 best practice is to create a separate storage account for logging diagnostics data
References: http://azure.microsoft.com/en-us/documentation/articles/cloud-services-how-to-monitor/
Our Unlimited Access Package will prepare you for your exam with guaranteed results, surpassing other ECBA-Deutsch 65503 .*
F. _65503_
Answer: E
Explanation:
http://www.cisco.com/c/en/us/td/docs/ios/12_2/termserv/configuration/guide/ftersv_c/tcfaap re.html
NEW QUESTION: 3
An engineer has integrated a new DMVPN to link remote offices across the internet using Cisco IOS routers. When connecting to remote sites, pings and voice data appear to flow properly and all tunnel stats seem to show that are up. However, when trying to connect to a remote server using RDP, the connection fails. Which action resolves this issue?
A. Add RDP port to the extended ACL.
B. Replace certificate on the RDP server.
C. Adjust the MTU size within the routers.
D. Change DMVPN timeout values.
Answer: B
NEW QUESTION: 4
You manage a cloud service that has a web application named WebRole1.
WebRole1 writes error messages to the Windows Event Log.
Users report receiving an error page with the following message: "Event 26 has occurred.
Contact your system administrator."
You need to access the WebRole1 event log.
Which three actions should you perform? Each correct answer presents part of the solution.
A. Update the WebRole1 web.config file.
B. Create a storage account.
C. Update the cloud service definition file and the service configuration file.
D. Run the Set-AzureVMDiagnosticsExtensionPowerShell cmdlet.
E. Run the Enable-AzureWebsiteApplicationDiagnostic PowerShell cmdlet.
F. Enable verbose monitoring.
Answer: B,C,F
Explanation:
step 1 specify the scheduled TransferLogLevelFilter to Verbose in the diagnostics.wadcfg step 2 Update the cloud service definition file and the service configuration file (.cspkg) step 3 best practice is to create a separate storage account for logging diagnostics data
References: http://azure.microsoft.com/en-us/documentation/articles/cloud-services-how-to-monitor/
F. _65503_
Answer: E
Explanation:
http://www.cisco.com/c/en/us/td/docs/ios/12_2/termserv/configuration/guide/ftersv_c/tcfaap re.html
NEW QUESTION: 3
An engineer has integrated a new DMVPN to link remote offices across the internet using Cisco IOS routers. When connecting to remote sites, pings and voice data appear to flow properly and all tunnel stats seem to show that are up. However, when trying to connect to a remote server using RDP, the connection fails. Which action resolves this issue?
A. Add RDP port to the extended ACL.
B. Replace certificate on the RDP server.
C. Adjust the MTU size within the routers.
D. Change DMVPN timeout values.
Answer: B
NEW QUESTION: 4
You manage a cloud service that has a web application named WebRole1.
WebRole1 writes error messages to the Windows Event Log.
Users report receiving an error page with the following message: "Event 26 has occurred.
Contact your system administrator."
You need to access the WebRole1 event log.
Which three actions should you perform? Each correct answer presents part of the solution.
A. Update the WebRole1 web.config file.
B. Create a storage account.
C. Update the cloud service definition file and the service configuration file.
D. Run the Set-AzureVMDiagnosticsExtensionPowerShell cmdlet.
E. Run the Enable-AzureWebsiteApplicationDiagnostic PowerShell cmdlet.
F. Enable verbose monitoring.
Answer: B,C,F
Explanation:
step 1 specify the scheduled TransferLogLevelFilter to Verbose in the diagnostics.wadcfg step 2 Update the cloud service definition file and the service configuration file (.cspkg) step 3 best practice is to create a separate storage account for logging diagnostics data
References: http://azure.microsoft.com/en-us/documentation/articles/cloud-services-how-to-monitor/
F. _65503_
Answer: E
Explanation:
http://www.cisco.com/c/en/us/td/docs/ios/12_2/termserv/configuration/guide/ftersv_c/tcfaap re.html
NEW QUESTION: 3
An engineer has integrated a new DMVPN to link remote offices across the internet using Cisco IOS routers. When connecting to remote sites, pings and voice data appear to flow properly and all tunnel stats seem to show that are up. However, when trying to connect to a remote server using RDP, the connection fails. Which action resolves this issue?
A. Add RDP port to the extended ACL.
B. Replace certificate on the RDP server.
C. Adjust the MTU size within the routers.
D. Change DMVPN timeout values.
Answer: B
NEW QUESTION: 4
You manage a cloud service that has a web application named WebRole1.
WebRole1 writes error messages to the Windows Event Log.
Users report receiving an error page with the following message: "Event 26 has occurred.
Contact your system administrator."
You need to access the WebRole1 event log.
Which three actions should you perform? Each correct answer presents part of the solution.
A. Update the WebRole1 web.config file.
B. Create a storage account.
C. Update the cloud service definition file and the service configuration file.
D. Run the Set-AzureVMDiagnosticsExtensionPowerShell cmdlet.
E. Run the Enable-AzureWebsiteApplicationDiagnostic PowerShell cmdlet.
F. Enable verbose monitoring.
Answer: B,C,F
Explanation:
step 1 specify the scheduled TransferLogLevelFilter to Verbose in the diagnostics.wadcfg step 2 Update the cloud service definition file and the service configuration file (.cspkg) step 3 best practice is to create a separate storage account for logging diagnostics data
References: http://azure.microsoft.com/en-us/documentation/articles/cloud-services-how-to-monitor/
F. _65503_
Answer: E
Explanation:
http://www.cisco.com/c/en/us/td/docs/ios/12_2/termserv/configuration/guide/ftersv_c/tcfaap re.html
NEW QUESTION: 3
An engineer has integrated a new DMVPN to link remote offices across the internet using Cisco IOS routers. When connecting to remote sites, pings and voice data appear to flow properly and all tunnel stats seem to show that are up. However, when trying to connect to a remote server using RDP, the connection fails. Which action resolves this issue?
A. Add RDP port to the extended ACL.
B. Replace certificate on the RDP server.
C. Adjust the MTU size within the routers.
D. Change DMVPN timeout values.
Answer: B
NEW QUESTION: 4
You manage a cloud service that has a web application named WebRole1.
WebRole1 writes error messages to the Windows Event Log.
Users report receiving an error page with the following message: "Event 26 has occurred.
Contact your system administrator."
You need to access the WebRole1 event log.
Which three actions should you perform? Each correct answer presents part of the solution.
A. Update the WebRole1 web.config file.
B. Create a storage account.
C. Update the cloud service definition file and the service configuration file.
D. Run the Set-AzureVMDiagnosticsExtensionPowerShell cmdlet.
E. Run the Enable-AzureWebsiteApplicationDiagnostic PowerShell cmdlet.
F. Enable verbose monitoring.
Answer: B,C,F
Explanation:
step 1 specify the scheduled TransferLogLevelFilter to Verbose in the diagnostics.wadcfg step 2 Update the cloud service definition file and the service configuration file (.cspkg) step 3 best practice is to create a separate storage account for logging diagnostics data
References: http://azure.microsoft.com/en-us/documentation/articles/cloud-services-how-to-monitor/
F. _65503_
Answer: E
Explanation:
http://www.cisco.com/c/en/us/td/docs/ios/12_2/termserv/configuration/guide/ftersv_c/tcfaap re.html
NEW QUESTION: 3
An engineer has integrated a new DMVPN to link remote offices across the internet using Cisco IOS routers. When connecting to remote sites, pings and voice data appear to flow properly and all tunnel stats seem to show that are up. However, when trying to connect to a remote server using RDP, the connection fails. Which action resolves this issue?
A. Add RDP port to the extended ACL.
B. Replace certificate on the RDP server.
C. Adjust the MTU size within the routers.
D. Change DMVPN timeout values.
Answer: B
NEW QUESTION: 4
You manage a cloud service that has a web application named WebRole1.
WebRole1 writes error messages to the Windows Event Log.
Users report receiving an error page with the following message: "Event 26 has occurred.
Contact your system administrator."
You need to access the WebRole1 event log.
Which three actions should you perform? Each correct answer presents part of the solution.
A. Update the WebRole1 web.config file.
B. Create a storage account.
C. Update the cloud service definition file and the service configuration file.
D. Run the Set-AzureVMDiagnosticsExtensionPowerShell cmdlet.
E. Run the Enable-AzureWebsiteApplicationDiagnostic PowerShell cmdlet.
F. Enable verbose monitoring.
Answer: B,C,F
Explanation:
step 1 specify the scheduled TransferLogLevelFilter to Verbose in the diagnostics.wadcfg step 2 Update the cloud service definition file and the service configuration file (.cspkg) step 3 best practice is to create a separate storage account for logging diagnostics data
References: http://azure.microsoft.com/en-us/documentation/articles/cloud-services-how-to-monitor/
F. _65503_
Answer: E
Explanation:
http://www.cisco.com/c/en/us/td/docs/ios/12_2/termserv/configuration/guide/ftersv_c/tcfaap re.html
NEW QUESTION: 3
An engineer has integrated a new DMVPN to link remote offices across the internet using Cisco IOS routers. When connecting to remote sites, pings and voice data appear to flow properly and all tunnel stats seem to show that are up. However, when trying to connect to a remote server using RDP, the connection fails. Which action resolves this issue?
A. Add RDP port to the extended ACL.
B. Replace certificate on the RDP server.
C. Adjust the MTU size within the routers.
D. Change DMVPN timeout values.
Answer: B
NEW QUESTION: 4
You manage a cloud service that has a web application named WebRole1.
WebRole1 writes error messages to the Windows Event Log.
Users report receiving an error page with the following message: "Event 26 has occurred.
Contact your system administrator."
You need to access the WebRole1 event log.
Which three actions should you perform? Each correct answer presents part of the solution.
A. Update the WebRole1 web.config file.
B. Create a storage account.
C. Update the cloud service definition file and the service configuration file.
D. Run the Set-AzureVMDiagnosticsExtensionPowerShell cmdlet.
E. Run the Enable-AzureWebsiteApplicationDiagnostic PowerShell cmdlet.
F. Enable verbose monitoring.
Answer: B,C,F
Explanation:
step 1 specify the scheduled TransferLogLevelFilter to Verbose in the diagnostics.wadcfg step 2 Update the cloud service definition file and the service configuration file (.cspkg) step 3 best practice is to create a separate storage account for logging diagnostics data
References: http://azure.microsoft.com/en-us/documentation/articles/cloud-services-how-to-monitor/
Skip all the worthless ECBA-Deutsch 65503 .*
F. _65503_
Answer: E
Explanation:
http://www.cisco.com/c/en/us/td/docs/ios/12_2/termserv/configuration/guide/ftersv_c/tcfaap re.html
NEW QUESTION: 3
An engineer has integrated a new DMVPN to link remote offices across the internet using Cisco IOS routers. When connecting to remote sites, pings and voice data appear to flow properly and all tunnel stats seem to show that are up. However, when trying to connect to a remote server using RDP, the connection fails. Which action resolves this issue?
A. Add RDP port to the extended ACL.
B. Replace certificate on the RDP server.
C. Adjust the MTU size within the routers.
D. Change DMVPN timeout values.
Answer: B
NEW QUESTION: 4
You manage a cloud service that has a web application named WebRole1.
WebRole1 writes error messages to the Windows Event Log.
Users report receiving an error page with the following message: "Event 26 has occurred.
Contact your system administrator."
You need to access the WebRole1 event log.
Which three actions should you perform? Each correct answer presents part of the solution.
A. Update the WebRole1 web.config file.
B. Create a storage account.
C. Update the cloud service definition file and the service configuration file.
D. Run the Set-AzureVMDiagnosticsExtensionPowerShell cmdlet.
E. Run the Enable-AzureWebsiteApplicationDiagnostic PowerShell cmdlet.
F. Enable verbose monitoring.
Answer: B,C,F
Explanation:
step 1 specify the scheduled TransferLogLevelFilter to Verbose in the diagnostics.wadcfg step 2 Update the cloud service definition file and the service configuration file (.cspkg) step 3 best practice is to create a separate storage account for logging diagnostics data
References: http://azure.microsoft.com/en-us/documentation/articles/cloud-services-how-to-monitor/
- CIPM Testing Engine
- 300-820 Probesfragen
- AD0-E555 PDF Testsoftware
- ACP-01101 Trainingsunterlagen
- PAM-SEN Trainingsunterlagen
- FCP_FGT_AD-7.4 Zertifikatsdemo
- MS-721 Prüfungsinformationen
- MS-721 Deutsch Prüfung
- Salesforce-Data-Cloud Zertifizierungsprüfung
- P3 Zertifizierungsfragen
- H12-425_V2.0 Deutsch
- AI-900-CN Übungsmaterialien
- NSE7_NST-7.2 Quizfragen Und Antworten
- C_THR89_2311 Online Prüfung
- LEED-AP-BD-C Examengine
- AD0-E559 Exam Fragen
- P-S4FIN-2021 Vorbereitung
- LEED-AP-ID-C Prüfungsaufgaben
- HPE2-W09 Deutsch
- C-TS413-2020 Fragenkatalog
- C_C4H620_34 Schulungsunterlagen
65503 .*
F. _65503_
Answer: E
Explanation:
http://www.cisco.com/c/en/us/td/docs/ios/12_2/termserv/configuration/guide/ftersv_c/tcfaap re.html
NEW QUESTION: 3
An engineer has integrated a new DMVPN to link remote offices across the internet using Cisco IOS routers. When connecting to remote sites, pings and voice data appear to flow properly and all tunnel stats seem to show that are up. However, when trying to connect to a remote server using RDP, the connection fails. Which action resolves this issue?
A. Add RDP port to the extended ACL.
B. Replace certificate on the RDP server.
C. Adjust the MTU size within the routers.
D. Change DMVPN timeout values.
Answer: B
NEW QUESTION: 4
You manage a cloud service that has a web application named WebRole1.
WebRole1 writes error messages to the Windows Event Log.
Users report receiving an error page with the following message: "Event 26 has occurred.
Contact your system administrator."
You need to access the WebRole1 event log.
Which three actions should you perform? Each correct answer presents part of the solution.
A. Update the WebRole1 web.config file.
B. Create a storage account.
C. Update the cloud service definition file and the service configuration file.
D. Run the Set-AzureVMDiagnosticsExtensionPowerShell cmdlet.
E. Run the Enable-AzureWebsiteApplicationDiagnostic PowerShell cmdlet.
F. Enable verbose monitoring.
Answer: B,C,F
Explanation:
step 1 specify the scheduled TransferLogLevelFilter to Verbose in the diagnostics.wadcfg step 2 Update the cloud service definition file and the service configuration file (.cspkg) step 3 best practice is to create a separate storage account for logging diagnostics data
References: http://azure.microsoft.com/en-us/documentation/articles/cloud-services-how-to-monitor/
Difficulty finding the right ECBA-Deutsch 65503 .*
F. _65503_
Answer: E
Explanation:
http://www.cisco.com/c/en/us/td/docs/ios/12_2/termserv/configuration/guide/ftersv_c/tcfaap re.html
NEW QUESTION: 3
An engineer has integrated a new DMVPN to link remote offices across the internet using Cisco IOS routers. When connecting to remote sites, pings and voice data appear to flow properly and all tunnel stats seem to show that are up. However, when trying to connect to a remote server using RDP, the connection fails. Which action resolves this issue?
A. Add RDP port to the extended ACL.
B. Replace certificate on the RDP server.
C. Adjust the MTU size within the routers.
D. Change DMVPN timeout values.
Answer: B
NEW QUESTION: 4
You manage a cloud service that has a web application named WebRole1.
WebRole1 writes error messages to the Windows Event Log.
Users report receiving an error page with the following message: "Event 26 has occurred.
Contact your system administrator."
You need to access the WebRole1 event log.
Which three actions should you perform? Each correct answer presents part of the solution.
A. Update the WebRole1 web.config file.
B. Create a storage account.
C. Update the cloud service definition file and the service configuration file.
D. Run the Set-AzureVMDiagnosticsExtensionPowerShell cmdlet.
E. Run the Enable-AzureWebsiteApplicationDiagnostic PowerShell cmdlet.
F. Enable verbose monitoring.
Answer: B,C,F
Explanation:
step 1 specify the scheduled TransferLogLevelFilter to Verbose in the diagnostics.wadcfg step 2 Update the cloud service definition file and the service configuration file (.cspkg) step 3 best practice is to create a separate storage account for logging diagnostics data
References: http://azure.microsoft.com/en-us/documentation/articles/cloud-services-how-to-monitor/
F. _65503_
Answer: E
Explanation:
http://www.cisco.com/c/en/us/td/docs/ios/12_2/termserv/configuration/guide/ftersv_c/tcfaap re.html
NEW QUESTION: 3
An engineer has integrated a new DMVPN to link remote offices across the internet using Cisco IOS routers. When connecting to remote sites, pings and voice data appear to flow properly and all tunnel stats seem to show that are up. However, when trying to connect to a remote server using RDP, the connection fails. Which action resolves this issue?
A. Add RDP port to the extended ACL.
B. Replace certificate on the RDP server.
C. Adjust the MTU size within the routers.
D. Change DMVPN timeout values.
Answer: B
NEW QUESTION: 4
You manage a cloud service that has a web application named WebRole1.
WebRole1 writes error messages to the Windows Event Log.
Users report receiving an error page with the following message: "Event 26 has occurred.
Contact your system administrator."
You need to access the WebRole1 event log.
Which three actions should you perform? Each correct answer presents part of the solution.
A. Update the WebRole1 web.config file.
B. Create a storage account.
C. Update the cloud service definition file and the service configuration file.
D. Run the Set-AzureVMDiagnosticsExtensionPowerShell cmdlet.
E. Run the Enable-AzureWebsiteApplicationDiagnostic PowerShell cmdlet.
F. Enable verbose monitoring.
Answer: B,C,F
Explanation:
step 1 specify the scheduled TransferLogLevelFilter to Verbose in the diagnostics.wadcfg step 2 Update the cloud service definition file and the service configuration file (.cspkg) step 3 best practice is to create a separate storage account for logging diagnostics data
References: http://azure.microsoft.com/en-us/documentation/articles/cloud-services-how-to-monitor/
F. _65503_
Answer: E
Explanation:
http://www.cisco.com/c/en/us/td/docs/ios/12_2/termserv/configuration/guide/ftersv_c/tcfaap re.html
NEW QUESTION: 3
An engineer has integrated a new DMVPN to link remote offices across the internet using Cisco IOS routers. When connecting to remote sites, pings and voice data appear to flow properly and all tunnel stats seem to show that are up. However, when trying to connect to a remote server using RDP, the connection fails. Which action resolves this issue?
A. Add RDP port to the extended ACL.
B. Replace certificate on the RDP server.
C. Adjust the MTU size within the routers.
D. Change DMVPN timeout values.
Answer: B
NEW QUESTION: 4
You manage a cloud service that has a web application named WebRole1.
WebRole1 writes error messages to the Windows Event Log.
Users report receiving an error page with the following message: "Event 26 has occurred.
Contact your system administrator."
You need to access the WebRole1 event log.
Which three actions should you perform? Each correct answer presents part of the solution.
A. Update the WebRole1 web.config file.
B. Create a storage account.
C. Update the cloud service definition file and the service configuration file.
D. Run the Set-AzureVMDiagnosticsExtensionPowerShell cmdlet.
E. Run the Enable-AzureWebsiteApplicationDiagnostic PowerShell cmdlet.
F. Enable verbose monitoring.
Answer: B,C,F
Explanation:
step 1 specify the scheduled TransferLogLevelFilter to Verbose in the diagnostics.wadcfg step 2 Update the cloud service definition file and the service configuration file (.cspkg) step 3 best practice is to create a separate storage account for logging diagnostics data
References: http://azure.microsoft.com/en-us/documentation/articles/cloud-services-how-to-monitor/
F. _65503_
Answer: E
Explanation:
http://www.cisco.com/c/en/us/td/docs/ios/12_2/termserv/configuration/guide/ftersv_c/tcfaap re.html
NEW QUESTION: 3
An engineer has integrated a new DMVPN to link remote offices across the internet using Cisco IOS routers. When connecting to remote sites, pings and voice data appear to flow properly and all tunnel stats seem to show that are up. However, when trying to connect to a remote server using RDP, the connection fails. Which action resolves this issue?
A. Add RDP port to the extended ACL.
B. Replace certificate on the RDP server.
C. Adjust the MTU size within the routers.
D. Change DMVPN timeout values.
Answer: B
NEW QUESTION: 4
You manage a cloud service that has a web application named WebRole1.
WebRole1 writes error messages to the Windows Event Log.
Users report receiving an error page with the following message: "Event 26 has occurred.
Contact your system administrator."
You need to access the WebRole1 event log.
Which three actions should you perform? Each correct answer presents part of the solution.
A. Update the WebRole1 web.config file.
B. Create a storage account.
C. Update the cloud service definition file and the service configuration file.
D. Run the Set-AzureVMDiagnosticsExtensionPowerShell cmdlet.
E. Run the Enable-AzureWebsiteApplicationDiagnostic PowerShell cmdlet.
F. Enable verbose monitoring.
Answer: B,C,F
Explanation:
step 1 specify the scheduled TransferLogLevelFilter to Verbose in the diagnostics.wadcfg step 2 Update the cloud service definition file and the service configuration file (.cspkg) step 3 best practice is to create a separate storage account for logging diagnostics data
References: http://azure.microsoft.com/en-us/documentation/articles/cloud-services-how-to-monitor/
- CIPM Testing Engine
- 300-820 Probesfragen
- AD0-E555 PDF Testsoftware
- ACP-01101 Trainingsunterlagen
- PAM-SEN Trainingsunterlagen
- FCP_FGT_AD-7.4 Zertifikatsdemo
- MS-721 Prüfungsinformationen
- MS-721 Deutsch Prüfung
- Salesforce-Data-Cloud Zertifizierungsprüfung
- P3 Zertifizierungsfragen
- H12-425_V2.0 Deutsch
- AI-900-CN Übungsmaterialien
- NSE7_NST-7.2 Quizfragen Und Antworten
- C_THR89_2311 Online Prüfung
- LEED-AP-BD-C Examengine
- AD0-E559 Exam Fragen
- P-S4FIN-2021 Vorbereitung
- LEED-AP-ID-C Prüfungsaufgaben
- HPE2-W09 Deutsch
- C-TS413-2020 Fragenkatalog
- C_C4H620_34 Schulungsunterlagen
F. _65503_
Answer: E
Explanation:
http://www.cisco.com/c/en/us/td/docs/ios/12_2/termserv/configuration/guide/ftersv_c/tcfaap re.html
NEW QUESTION: 3
An engineer has integrated a new DMVPN to link remote offices across the internet using Cisco IOS routers. When connecting to remote sites, pings and voice data appear to flow properly and all tunnel stats seem to show that are up. However, when trying to connect to a remote server using RDP, the connection fails. Which action resolves this issue?
A. Add RDP port to the extended ACL.
B. Replace certificate on the RDP server.
C. Adjust the MTU size within the routers.
D. Change DMVPN timeout values.
Answer: B
NEW QUESTION: 4
You manage a cloud service that has a web application named WebRole1.
WebRole1 writes error messages to the Windows Event Log.
Users report receiving an error page with the following message: "Event 26 has occurred.
Contact your system administrator."
You need to access the WebRole1 event log.
Which three actions should you perform? Each correct answer presents part of the solution.
A. Update the WebRole1 web.config file.
B. Create a storage account.
C. Update the cloud service definition file and the service configuration file.
D. Run the Set-AzureVMDiagnosticsExtensionPowerShell cmdlet.
E. Run the Enable-AzureWebsiteApplicationDiagnostic PowerShell cmdlet.
F. Enable verbose monitoring.
Answer: B,C,F
Explanation:
step 1 specify the scheduled TransferLogLevelFilter to Verbose in the diagnostics.wadcfg step 2 Update the cloud service definition file and the service configuration file (.cspkg) step 3 best practice is to create a separate storage account for logging diagnostics data
References: http://azure.microsoft.com/en-us/documentation/articles/cloud-services-how-to-monitor/
- CIPM Testing Engine
- 300-820 Probesfragen
- AD0-E555 PDF Testsoftware
- ACP-01101 Trainingsunterlagen
- PAM-SEN Trainingsunterlagen
- FCP_FGT_AD-7.4 Zertifikatsdemo
- MS-721 Prüfungsinformationen
- MS-721 Deutsch Prüfung
- Salesforce-Data-Cloud Zertifizierungsprüfung
- P3 Zertifizierungsfragen
- H12-425_V2.0 Deutsch
- AI-900-CN Übungsmaterialien
- NSE7_NST-7.2 Quizfragen Und Antworten
- C_THR89_2311 Online Prüfung
- LEED-AP-BD-C Examengine
- AD0-E559 Exam Fragen
- P-S4FIN-2021 Vorbereitung
- LEED-AP-ID-C Prüfungsaufgaben
- HPE2-W09 Deutsch
- C-TS413-2020 Fragenkatalog
- C_C4H620_34 Schulungsunterlagen
F. _65503_
Answer: E
Explanation:
http://www.cisco.com/c/en/us/td/docs/ios/12_2/termserv/configuration/guide/ftersv_c/tcfaap re.html
NEW QUESTION: 3
An engineer has integrated a new DMVPN to link remote offices across the internet using Cisco IOS routers. When connecting to remote sites, pings and voice data appear to flow properly and all tunnel stats seem to show that are up. However, when trying to connect to a remote server using RDP, the connection fails. Which action resolves this issue?
A. Add RDP port to the extended ACL.
B. Replace certificate on the RDP server.
C. Adjust the MTU size within the routers.
D. Change DMVPN timeout values.
Answer: B
NEW QUESTION: 4
You manage a cloud service that has a web application named WebRole1.
WebRole1 writes error messages to the Windows Event Log.
Users report receiving an error page with the following message: "Event 26 has occurred.
Contact your system administrator."
You need to access the WebRole1 event log.
Which three actions should you perform? Each correct answer presents part of the solution.
A. Update the WebRole1 web.config file.
B. Create a storage account.
C. Update the cloud service definition file and the service configuration file.
D. Run the Set-AzureVMDiagnosticsExtensionPowerShell cmdlet.
E. Run the Enable-AzureWebsiteApplicationDiagnostic PowerShell cmdlet.
F. Enable verbose monitoring.
Answer: B,C,F
Explanation:
step 1 specify the scheduled TransferLogLevelFilter to Verbose in the diagnostics.wadcfg step 2 Update the cloud service definition file and the service configuration file (.cspkg) step 3 best practice is to create a separate storage account for logging diagnostics data
References: http://azure.microsoft.com/en-us/documentation/articles/cloud-services-how-to-monitor/
F. _65503_
Answer: E
Explanation:
http://www.cisco.com/c/en/us/td/docs/ios/12_2/termserv/configuration/guide/ftersv_c/tcfaap re.html
NEW QUESTION: 3
An engineer has integrated a new DMVPN to link remote offices across the internet using Cisco IOS routers. When connecting to remote sites, pings and voice data appear to flow properly and all tunnel stats seem to show that are up. However, when trying to connect to a remote server using RDP, the connection fails. Which action resolves this issue?
A. Add RDP port to the extended ACL.
B. Replace certificate on the RDP server.
C. Adjust the MTU size within the routers.
D. Change DMVPN timeout values.
Answer: B
NEW QUESTION: 4
You manage a cloud service that has a web application named WebRole1.
WebRole1 writes error messages to the Windows Event Log.
Users report receiving an error page with the following message: "Event 26 has occurred.
Contact your system administrator."
You need to access the WebRole1 event log.
Which three actions should you perform? Each correct answer presents part of the solution.
A. Update the WebRole1 web.config file.
B. Create a storage account.
C. Update the cloud service definition file and the service configuration file.
D. Run the Set-AzureVMDiagnosticsExtensionPowerShell cmdlet.
E. Run the Enable-AzureWebsiteApplicationDiagnostic PowerShell cmdlet.
F. Enable verbose monitoring.
Answer: B,C,F
Explanation:
step 1 specify the scheduled TransferLogLevelFilter to Verbose in the diagnostics.wadcfg step 2 Update the cloud service definition file and the service configuration file (.cspkg) step 3 best practice is to create a separate storage account for logging diagnostics data
References: http://azure.microsoft.com/en-us/documentation/articles/cloud-services-how-to-monitor/
F. _65503_
Answer: E
Explanation:
http://www.cisco.com/c/en/us/td/docs/ios/12_2/termserv/configuration/guide/ftersv_c/tcfaap re.html
NEW QUESTION: 3
An engineer has integrated a new DMVPN to link remote offices across the internet using Cisco IOS routers. When connecting to remote sites, pings and voice data appear to flow properly and all tunnel stats seem to show that are up. However, when trying to connect to a remote server using RDP, the connection fails. Which action resolves this issue?
A. Add RDP port to the extended ACL.
B. Replace certificate on the RDP server.
C. Adjust the MTU size within the routers.
D. Change DMVPN timeout values.
Answer: B
NEW QUESTION: 4
You manage a cloud service that has a web application named WebRole1.
WebRole1 writes error messages to the Windows Event Log.
Users report receiving an error page with the following message: "Event 26 has occurred.
Contact your system administrator."
You need to access the WebRole1 event log.
Which three actions should you perform? Each correct answer presents part of the solution.
A. Update the WebRole1 web.config file.
B. Create a storage account.
C. Update the cloud service definition file and the service configuration file.
D. Run the Set-AzureVMDiagnosticsExtensionPowerShell cmdlet.
E. Run the Enable-AzureWebsiteApplicationDiagnostic PowerShell cmdlet.
F. Enable verbose monitoring.
Answer: B,C,F
Explanation:
step 1 specify the scheduled TransferLogLevelFilter to Verbose in the diagnostics.wadcfg step 2 Update the cloud service definition file and the service configuration file (.cspkg) step 3 best practice is to create a separate storage account for logging diagnostics data
References: http://azure.microsoft.com/en-us/documentation/articles/cloud-services-how-to-monitor/
65503 .*
F. _65503_
Answer: E
Explanation:
http://www.cisco.com/c/en/us/td/docs/ios/12_2/termserv/configuration/guide/ftersv_c/tcfaap re.html
NEW QUESTION: 3
An engineer has integrated a new DMVPN to link remote offices across the internet using Cisco IOS routers. When connecting to remote sites, pings and voice data appear to flow properly and all tunnel stats seem to show that are up. However, when trying to connect to a remote server using RDP, the connection fails. Which action resolves this issue?
A. Add RDP port to the extended ACL.
B. Replace certificate on the RDP server.
C. Adjust the MTU size within the routers.
D. Change DMVPN timeout values.
Answer: B
NEW QUESTION: 4
You manage a cloud service that has a web application named WebRole1.
WebRole1 writes error messages to the Windows Event Log.
Users report receiving an error page with the following message: "Event 26 has occurred.
Contact your system administrator."
You need to access the WebRole1 event log.
Which three actions should you perform? Each correct answer presents part of the solution.
A. Update the WebRole1 web.config file.
B. Create a storage account.
C. Update the cloud service definition file and the service configuration file.
D. Run the Set-AzureVMDiagnosticsExtensionPowerShell cmdlet.
E. Run the Enable-AzureWebsiteApplicationDiagnostic PowerShell cmdlet.
F. Enable verbose monitoring.
Answer: B,C,F
Explanation:
step 1 specify the scheduled TransferLogLevelFilter to Verbose in the diagnostics.wadcfg step 2 Update the cloud service definition file and the service configuration file (.cspkg) step 3 best practice is to create a separate storage account for logging diagnostics data
References: http://azure.microsoft.com/en-us/documentation/articles/cloud-services-how-to-monitor/
Still searching for ECBA-Deutsch 65503 .*
F. _65503_
Answer: E
Explanation:
http://www.cisco.com/c/en/us/td/docs/ios/12_2/termserv/configuration/guide/ftersv_c/tcfaap re.html
NEW QUESTION: 3
An engineer has integrated a new DMVPN to link remote offices across the internet using Cisco IOS routers. When connecting to remote sites, pings and voice data appear to flow properly and all tunnel stats seem to show that are up. However, when trying to connect to a remote server using RDP, the connection fails. Which action resolves this issue?
A. Add RDP port to the extended ACL.
B. Replace certificate on the RDP server.
C. Adjust the MTU size within the routers.
D. Change DMVPN timeout values.
Answer: B
NEW QUESTION: 4
You manage a cloud service that has a web application named WebRole1.
WebRole1 writes error messages to the Windows Event Log.
Users report receiving an error page with the following message: "Event 26 has occurred.
Contact your system administrator."
You need to access the WebRole1 event log.
Which three actions should you perform? Each correct answer presents part of the solution.
A. Update the WebRole1 web.config file.
B. Create a storage account.
C. Update the cloud service definition file and the service configuration file.
D. Run the Set-AzureVMDiagnosticsExtensionPowerShell cmdlet.
E. Run the Enable-AzureWebsiteApplicationDiagnostic PowerShell cmdlet.
F. Enable verbose monitoring.
Answer: B,C,F
Explanation:
step 1 specify the scheduled TransferLogLevelFilter to Verbose in the diagnostics.wadcfg step 2 Update the cloud service definition file and the service configuration file (.cspkg) step 3 best practice is to create a separate storage account for logging diagnostics data
References: http://azure.microsoft.com/en-us/documentation/articles/cloud-services-how-to-monitor/
F. _65503_
Answer: E
Explanation:
http://www.cisco.com/c/en/us/td/docs/ios/12_2/termserv/configuration/guide/ftersv_c/tcfaap re.html
NEW QUESTION: 3
An engineer has integrated a new DMVPN to link remote offices across the internet using Cisco IOS routers. When connecting to remote sites, pings and voice data appear to flow properly and all tunnel stats seem to show that are up. However, when trying to connect to a remote server using RDP, the connection fails. Which action resolves this issue?
A. Add RDP port to the extended ACL.
B. Replace certificate on the RDP server.
C. Adjust the MTU size within the routers.
D. Change DMVPN timeout values.
Answer: B
NEW QUESTION: 4
You manage a cloud service that has a web application named WebRole1.
WebRole1 writes error messages to the Windows Event Log.
Users report receiving an error page with the following message: "Event 26 has occurred.
Contact your system administrator."
You need to access the WebRole1 event log.
Which three actions should you perform? Each correct answer presents part of the solution.
A. Update the WebRole1 web.config file.
B. Create a storage account.
C. Update the cloud service definition file and the service configuration file.
D. Run the Set-AzureVMDiagnosticsExtensionPowerShell cmdlet.
E. Run the Enable-AzureWebsiteApplicationDiagnostic PowerShell cmdlet.
F. Enable verbose monitoring.
Answer: B,C,F
Explanation:
step 1 specify the scheduled TransferLogLevelFilter to Verbose in the diagnostics.wadcfg step 2 Update the cloud service definition file and the service configuration file (.cspkg) step 3 best practice is to create a separate storage account for logging diagnostics data
References: http://azure.microsoft.com/en-us/documentation/articles/cloud-services-how-to-monitor/
F. _65503_
Answer: E
Explanation:
http://www.cisco.com/c/en/us/td/docs/ios/12_2/termserv/configuration/guide/ftersv_c/tcfaap re.html
NEW QUESTION: 3
An engineer has integrated a new DMVPN to link remote offices across the internet using Cisco IOS routers. When connecting to remote sites, pings and voice data appear to flow properly and all tunnel stats seem to show that are up. However, when trying to connect to a remote server using RDP, the connection fails. Which action resolves this issue?
A. Add RDP port to the extended ACL.
B. Replace certificate on the RDP server.
C. Adjust the MTU size within the routers.
D. Change DMVPN timeout values.
Answer: B
NEW QUESTION: 4
You manage a cloud service that has a web application named WebRole1.
WebRole1 writes error messages to the Windows Event Log.
Users report receiving an error page with the following message: "Event 26 has occurred.
Contact your system administrator."
You need to access the WebRole1 event log.
Which three actions should you perform? Each correct answer presents part of the solution.
A. Update the WebRole1 web.config file.
B. Create a storage account.
C. Update the cloud service definition file and the service configuration file.
D. Run the Set-AzureVMDiagnosticsExtensionPowerShell cmdlet.
E. Run the Enable-AzureWebsiteApplicationDiagnostic PowerShell cmdlet.
F. Enable verbose monitoring.
Answer: B,C,F
Explanation:
step 1 specify the scheduled TransferLogLevelFilter to Verbose in the diagnostics.wadcfg step 2 Update the cloud service definition file and the service configuration file (.cspkg) step 3 best practice is to create a separate storage account for logging diagnostics data
References: http://azure.microsoft.com/en-us/documentation/articles/cloud-services-how-to-monitor/
F. _65503_
Answer: E
Explanation:
http://www.cisco.com/c/en/us/td/docs/ios/12_2/termserv/configuration/guide/ftersv_c/tcfaap re.html
NEW QUESTION: 3
An engineer has integrated a new DMVPN to link remote offices across the internet using Cisco IOS routers. When connecting to remote sites, pings and voice data appear to flow properly and all tunnel stats seem to show that are up. However, when trying to connect to a remote server using RDP, the connection fails. Which action resolves this issue?
A. Add RDP port to the extended ACL.
B. Replace certificate on the RDP server.
C. Adjust the MTU size within the routers.
D. Change DMVPN timeout values.
Answer: B
NEW QUESTION: 4
You manage a cloud service that has a web application named WebRole1.
WebRole1 writes error messages to the Windows Event Log.
Users report receiving an error page with the following message: "Event 26 has occurred.
Contact your system administrator."
You need to access the WebRole1 event log.
Which three actions should you perform? Each correct answer presents part of the solution.
A. Update the WebRole1 web.config file.
B. Create a storage account.
C. Update the cloud service definition file and the service configuration file.
D. Run the Set-AzureVMDiagnosticsExtensionPowerShell cmdlet.
E. Run the Enable-AzureWebsiteApplicationDiagnostic PowerShell cmdlet.
F. Enable verbose monitoring.
Answer: B,C,F
Explanation:
step 1 specify the scheduled TransferLogLevelFilter to Verbose in the diagnostics.wadcfg step 2 Update the cloud service definition file and the service configuration file (.cspkg) step 3 best practice is to create a separate storage account for logging diagnostics data
References: http://azure.microsoft.com/en-us/documentation/articles/cloud-services-how-to-monitor/
F. _65503_
Answer: E
Explanation:
http://www.cisco.com/c/en/us/td/docs/ios/12_2/termserv/configuration/guide/ftersv_c/tcfaap re.html
NEW QUESTION: 3
An engineer has integrated a new DMVPN to link remote offices across the internet using Cisco IOS routers. When connecting to remote sites, pings and voice data appear to flow properly and all tunnel stats seem to show that are up. However, when trying to connect to a remote server using RDP, the connection fails. Which action resolves this issue?
A. Add RDP port to the extended ACL.
B. Replace certificate on the RDP server.
C. Adjust the MTU size within the routers.
D. Change DMVPN timeout values.
Answer: B
NEW QUESTION: 4
You manage a cloud service that has a web application named WebRole1.
WebRole1 writes error messages to the Windows Event Log.
Users report receiving an error page with the following message: "Event 26 has occurred.
Contact your system administrator."
You need to access the WebRole1 event log.
Which three actions should you perform? Each correct answer presents part of the solution.
A. Update the WebRole1 web.config file.
B. Create a storage account.
C. Update the cloud service definition file and the service configuration file.
D. Run the Set-AzureVMDiagnosticsExtensionPowerShell cmdlet.
E. Run the Enable-AzureWebsiteApplicationDiagnostic PowerShell cmdlet.
F. Enable verbose monitoring.
Answer: B,C,F
Explanation:
step 1 specify the scheduled TransferLogLevelFilter to Verbose in the diagnostics.wadcfg step 2 Update the cloud service definition file and the service configuration file (.cspkg) step 3 best practice is to create a separate storage account for logging diagnostics data
References: http://azure.microsoft.com/en-us/documentation/articles/cloud-services-how-to-monitor/
F. _65503_
Answer: E
Explanation:
http://www.cisco.com/c/en/us/td/docs/ios/12_2/termserv/configuration/guide/ftersv_c/tcfaap re.html
NEW QUESTION: 3
An engineer has integrated a new DMVPN to link remote offices across the internet using Cisco IOS routers. When connecting to remote sites, pings and voice data appear to flow properly and all tunnel stats seem to show that are up. However, when trying to connect to a remote server using RDP, the connection fails. Which action resolves this issue?
A. Add RDP port to the extended ACL.
B. Replace certificate on the RDP server.
C. Adjust the MTU size within the routers.
D. Change DMVPN timeout values.
Answer: B
NEW QUESTION: 4
You manage a cloud service that has a web application named WebRole1.
WebRole1 writes error messages to the Windows Event Log.
Users report receiving an error page with the following message: "Event 26 has occurred.
Contact your system administrator."
You need to access the WebRole1 event log.
Which three actions should you perform? Each correct answer presents part of the solution.
A. Update the WebRole1 web.config file.
B. Create a storage account.
C. Update the cloud service definition file and the service configuration file.
D. Run the Set-AzureVMDiagnosticsExtensionPowerShell cmdlet.
E. Run the Enable-AzureWebsiteApplicationDiagnostic PowerShell cmdlet.
F. Enable verbose monitoring.
Answer: B,C,F
Explanation:
step 1 specify the scheduled TransferLogLevelFilter to Verbose in the diagnostics.wadcfg step 2 Update the cloud service definition file and the service configuration file (.cspkg) step 3 best practice is to create a separate storage account for logging diagnostics data
References: http://azure.microsoft.com/en-us/documentation/articles/cloud-services-how-to-monitor/
F. _65503_
Answer: E
Explanation:
http://www.cisco.com/c/en/us/td/docs/ios/12_2/termserv/configuration/guide/ftersv_c/tcfaap re.html
NEW QUESTION: 3
An engineer has integrated a new DMVPN to link remote offices across the internet using Cisco IOS routers. When connecting to remote sites, pings and voice data appear to flow properly and all tunnel stats seem to show that are up. However, when trying to connect to a remote server using RDP, the connection fails. Which action resolves this issue?
A. Add RDP port to the extended ACL.
B. Replace certificate on the RDP server.
C. Adjust the MTU size within the routers.
D. Change DMVPN timeout values.
Answer: B
NEW QUESTION: 4
You manage a cloud service that has a web application named WebRole1.
WebRole1 writes error messages to the Windows Event Log.
Users report receiving an error page with the following message: "Event 26 has occurred.
Contact your system administrator."
You need to access the WebRole1 event log.
Which three actions should you perform? Each correct answer presents part of the solution.
A. Update the WebRole1 web.config file.
B. Create a storage account.
C. Update the cloud service definition file and the service configuration file.
D. Run the Set-AzureVMDiagnosticsExtensionPowerShell cmdlet.
E. Run the Enable-AzureWebsiteApplicationDiagnostic PowerShell cmdlet.
F. Enable verbose monitoring.
Answer: B,C,F
Explanation:
step 1 specify the scheduled TransferLogLevelFilter to Verbose in the diagnostics.wadcfg step 2 Update the cloud service definition file and the service configuration file (.cspkg) step 3 best practice is to create a separate storage account for logging diagnostics data
References: http://azure.microsoft.com/en-us/documentation/articles/cloud-services-how-to-monitor/
65503 .*
F. _65503_
Answer: E
Explanation:
http://www.cisco.com/c/en/us/td/docs/ios/12_2/termserv/configuration/guide/ftersv_c/tcfaap re.html
NEW QUESTION: 3
An engineer has integrated a new DMVPN to link remote offices across the internet using Cisco IOS routers. When connecting to remote sites, pings and voice data appear to flow properly and all tunnel stats seem to show that are up. However, when trying to connect to a remote server using RDP, the connection fails. Which action resolves this issue?
A. Add RDP port to the extended ACL.
B. Replace certificate on the RDP server.
C. Adjust the MTU size within the routers.
D. Change DMVPN timeout values.
Answer: B
NEW QUESTION: 4
You manage a cloud service that has a web application named WebRole1.
WebRole1 writes error messages to the Windows Event Log.
Users report receiving an error page with the following message: "Event 26 has occurred.
Contact your system administrator."
You need to access the WebRole1 event log.
Which three actions should you perform? Each correct answer presents part of the solution.
A. Update the WebRole1 web.config file.
B. Create a storage account.
C. Update the cloud service definition file and the service configuration file.
D. Run the Set-AzureVMDiagnosticsExtensionPowerShell cmdlet.
E. Run the Enable-AzureWebsiteApplicationDiagnostic PowerShell cmdlet.
F. Enable verbose monitoring.
Answer: B,C,F
Explanation:
step 1 specify the scheduled TransferLogLevelFilter to Verbose in the diagnostics.wadcfg step 2 Update the cloud service definition file and the service configuration file (.cspkg) step 3 best practice is to create a separate storage account for logging diagnostics data
References: http://azure.microsoft.com/en-us/documentation/articles/cloud-services-how-to-monitor/
Keep walking if all you want is free ECBA-Deutsch 65503 .*
F. _65503_
Answer: E
Explanation:
http://www.cisco.com/c/en/us/td/docs/ios/12_2/termserv/configuration/guide/ftersv_c/tcfaap re.html
NEW QUESTION: 3
An engineer has integrated a new DMVPN to link remote offices across the internet using Cisco IOS routers. When connecting to remote sites, pings and voice data appear to flow properly and all tunnel stats seem to show that are up. However, when trying to connect to a remote server using RDP, the connection fails. Which action resolves this issue?
A. Add RDP port to the extended ACL.
B. Replace certificate on the RDP server.
C. Adjust the MTU size within the routers.
D. Change DMVPN timeout values.
Answer: B
NEW QUESTION: 4
You manage a cloud service that has a web application named WebRole1.
WebRole1 writes error messages to the Windows Event Log.
Users report receiving an error page with the following message: "Event 26 has occurred.
Contact your system administrator."
You need to access the WebRole1 event log.
Which three actions should you perform? Each correct answer presents part of the solution.
A. Update the WebRole1 web.config file.
B. Create a storage account.
C. Update the cloud service definition file and the service configuration file.
D. Run the Set-AzureVMDiagnosticsExtensionPowerShell cmdlet.
E. Run the Enable-AzureWebsiteApplicationDiagnostic PowerShell cmdlet.
F. Enable verbose monitoring.
Answer: B,C,F
Explanation:
step 1 specify the scheduled TransferLogLevelFilter to Verbose in the diagnostics.wadcfg step 2 Update the cloud service definition file and the service configuration file (.cspkg) step 3 best practice is to create a separate storage account for logging diagnostics data
References: http://azure.microsoft.com/en-us/documentation/articles/cloud-services-how-to-monitor/
F. _65503_
Answer: E
Explanation:
http://www.cisco.com/c/en/us/td/docs/ios/12_2/termserv/configuration/guide/ftersv_c/tcfaap re.html
NEW QUESTION: 3
An engineer has integrated a new DMVPN to link remote offices across the internet using Cisco IOS routers. When connecting to remote sites, pings and voice data appear to flow properly and all tunnel stats seem to show that are up. However, when trying to connect to a remote server using RDP, the connection fails. Which action resolves this issue?
A. Add RDP port to the extended ACL.
B. Replace certificate on the RDP server.
C. Adjust the MTU size within the routers.
D. Change DMVPN timeout values.
Answer: B
NEW QUESTION: 4
You manage a cloud service that has a web application named WebRole1.
WebRole1 writes error messages to the Windows Event Log.
Users report receiving an error page with the following message: "Event 26 has occurred.
Contact your system administrator."
You need to access the WebRole1 event log.
Which three actions should you perform? Each correct answer presents part of the solution.
A. Update the WebRole1 web.config file.
B. Create a storage account.
C. Update the cloud service definition file and the service configuration file.
D. Run the Set-AzureVMDiagnosticsExtensionPowerShell cmdlet.
E. Run the Enable-AzureWebsiteApplicationDiagnostic PowerShell cmdlet.
F. Enable verbose monitoring.
Answer: B,C,F
Explanation:
step 1 specify the scheduled TransferLogLevelFilter to Verbose in the diagnostics.wadcfg step 2 Update the cloud service definition file and the service configuration file (.cspkg) step 3 best practice is to create a separate storage account for logging diagnostics data
References: http://azure.microsoft.com/en-us/documentation/articles/cloud-services-how-to-monitor/
- CIPM Testing Engine
- 300-820 Probesfragen
- AD0-E555 PDF Testsoftware
- ACP-01101 Trainingsunterlagen
- PAM-SEN Trainingsunterlagen
- FCP_FGT_AD-7.4 Zertifikatsdemo
- MS-721 Prüfungsinformationen
- MS-721 Deutsch Prüfung
- Salesforce-Data-Cloud Zertifizierungsprüfung
- P3 Zertifizierungsfragen
- H12-425_V2.0 Deutsch
- AI-900-CN Übungsmaterialien
- NSE7_NST-7.2 Quizfragen Und Antworten
- C_THR89_2311 Online Prüfung
- LEED-AP-BD-C Examengine
- AD0-E559 Exam Fragen
- P-S4FIN-2021 Vorbereitung
- LEED-AP-ID-C Prüfungsaufgaben
- HPE2-W09 Deutsch
- C-TS413-2020 Fragenkatalog
- C_C4H620_34 Schulungsunterlagen
F. _65503_
Answer: E
Explanation:
http://www.cisco.com/c/en/us/td/docs/ios/12_2/termserv/configuration/guide/ftersv_c/tcfaap re.html
NEW QUESTION: 3
An engineer has integrated a new DMVPN to link remote offices across the internet using Cisco IOS routers. When connecting to remote sites, pings and voice data appear to flow properly and all tunnel stats seem to show that are up. However, when trying to connect to a remote server using RDP, the connection fails. Which action resolves this issue?
A. Add RDP port to the extended ACL.
B. Replace certificate on the RDP server.
C. Adjust the MTU size within the routers.
D. Change DMVPN timeout values.
Answer: B
NEW QUESTION: 4
You manage a cloud service that has a web application named WebRole1.
WebRole1 writes error messages to the Windows Event Log.
Users report receiving an error page with the following message: "Event 26 has occurred.
Contact your system administrator."
You need to access the WebRole1 event log.
Which three actions should you perform? Each correct answer presents part of the solution.
A. Update the WebRole1 web.config file.
B. Create a storage account.
C. Update the cloud service definition file and the service configuration file.
D. Run the Set-AzureVMDiagnosticsExtensionPowerShell cmdlet.
E. Run the Enable-AzureWebsiteApplicationDiagnostic PowerShell cmdlet.
F. Enable verbose monitoring.
Answer: B,C,F
Explanation:
step 1 specify the scheduled TransferLogLevelFilter to Verbose in the diagnostics.wadcfg step 2 Update the cloud service definition file and the service configuration file (.cspkg) step 3 best practice is to create a separate storage account for logging diagnostics data
References: http://azure.microsoft.com/en-us/documentation/articles/cloud-services-how-to-monitor/
F. _65503_
Answer: E
Explanation:
http://www.cisco.com/c/en/us/td/docs/ios/12_2/termserv/configuration/guide/ftersv_c/tcfaap re.html
NEW QUESTION: 3
An engineer has integrated a new DMVPN to link remote offices across the internet using Cisco IOS routers. When connecting to remote sites, pings and voice data appear to flow properly and all tunnel stats seem to show that are up. However, when trying to connect to a remote server using RDP, the connection fails. Which action resolves this issue?
A. Add RDP port to the extended ACL.
B. Replace certificate on the RDP server.
C. Adjust the MTU size within the routers.
D. Change DMVPN timeout values.
Answer: B
NEW QUESTION: 4
You manage a cloud service that has a web application named WebRole1.
WebRole1 writes error messages to the Windows Event Log.
Users report receiving an error page with the following message: "Event 26 has occurred.
Contact your system administrator."
You need to access the WebRole1 event log.
Which three actions should you perform? Each correct answer presents part of the solution.
A. Update the WebRole1 web.config file.
B. Create a storage account.
C. Update the cloud service definition file and the service configuration file.
D. Run the Set-AzureVMDiagnosticsExtensionPowerShell cmdlet.
E. Run the Enable-AzureWebsiteApplicationDiagnostic PowerShell cmdlet.
F. Enable verbose monitoring.
Answer: B,C,F
Explanation:
step 1 specify the scheduled TransferLogLevelFilter to Verbose in the diagnostics.wadcfg step 2 Update the cloud service definition file and the service configuration file (.cspkg) step 3 best practice is to create a separate storage account for logging diagnostics data
References: http://azure.microsoft.com/en-us/documentation/articles/cloud-services-how-to-monitor/
F. _65503_
Answer: E
Explanation:
http://www.cisco.com/c/en/us/td/docs/ios/12_2/termserv/configuration/guide/ftersv_c/tcfaap re.html
NEW QUESTION: 3
An engineer has integrated a new DMVPN to link remote offices across the internet using Cisco IOS routers. When connecting to remote sites, pings and voice data appear to flow properly and all tunnel stats seem to show that are up. However, when trying to connect to a remote server using RDP, the connection fails. Which action resolves this issue?
A. Add RDP port to the extended ACL.
B. Replace certificate on the RDP server.
C. Adjust the MTU size within the routers.
D. Change DMVPN timeout values.
Answer: B
NEW QUESTION: 4
You manage a cloud service that has a web application named WebRole1.
WebRole1 writes error messages to the Windows Event Log.
Users report receiving an error page with the following message: "Event 26 has occurred.
Contact your system administrator."
You need to access the WebRole1 event log.
Which three actions should you perform? Each correct answer presents part of the solution.
A. Update the WebRole1 web.config file.
B. Create a storage account.
C. Update the cloud service definition file and the service configuration file.
D. Run the Set-AzureVMDiagnosticsExtensionPowerShell cmdlet.
E. Run the Enable-AzureWebsiteApplicationDiagnostic PowerShell cmdlet.
F. Enable verbose monitoring.
Answer: B,C,F
Explanation:
step 1 specify the scheduled TransferLogLevelFilter to Verbose in the diagnostics.wadcfg step 2 Update the cloud service definition file and the service configuration file (.cspkg) step 3 best practice is to create a separate storage account for logging diagnostics data
References: http://azure.microsoft.com/en-us/documentation/articles/cloud-services-how-to-monitor/
F. _65503_
Answer: E
Explanation:
http://www.cisco.com/c/en/us/td/docs/ios/12_2/termserv/configuration/guide/ftersv_c/tcfaap re.html
NEW QUESTION: 3
An engineer has integrated a new DMVPN to link remote offices across the internet using Cisco IOS routers. When connecting to remote sites, pings and voice data appear to flow properly and all tunnel stats seem to show that are up. However, when trying to connect to a remote server using RDP, the connection fails. Which action resolves this issue?
A. Add RDP port to the extended ACL.
B. Replace certificate on the RDP server.
C. Adjust the MTU size within the routers.
D. Change DMVPN timeout values.
Answer: B
NEW QUESTION: 4
You manage a cloud service that has a web application named WebRole1.
WebRole1 writes error messages to the Windows Event Log.
Users report receiving an error page with the following message: "Event 26 has occurred.
Contact your system administrator."
You need to access the WebRole1 event log.
Which three actions should you perform? Each correct answer presents part of the solution.
A. Update the WebRole1 web.config file.
B. Create a storage account.
C. Update the cloud service definition file and the service configuration file.
D. Run the Set-AzureVMDiagnosticsExtensionPowerShell cmdlet.
E. Run the Enable-AzureWebsiteApplicationDiagnostic PowerShell cmdlet.
F. Enable verbose monitoring.
Answer: B,C,F
Explanation:
step 1 specify the scheduled TransferLogLevelFilter to Verbose in the diagnostics.wadcfg step 2 Update the cloud service definition file and the service configuration file (.cspkg) step 3 best practice is to create a separate storage account for logging diagnostics data
References: http://azure.microsoft.com/en-us/documentation/articles/cloud-services-how-to-monitor/
65503 .*
F. _65503_
Answer: E
Explanation:
http://www.cisco.com/c/en/us/td/docs/ios/12_2/termserv/configuration/guide/ftersv_c/tcfaap re.html
NEW QUESTION: 3
An engineer has integrated a new DMVPN to link remote offices across the internet using Cisco IOS routers. When connecting to remote sites, pings and voice data appear to flow properly and all tunnel stats seem to show that are up. However, when trying to connect to a remote server using RDP, the connection fails. Which action resolves this issue?
A. Add RDP port to the extended ACL.
B. Replace certificate on the RDP server.
C. Adjust the MTU size within the routers.
D. Change DMVPN timeout values.
Answer: B
NEW QUESTION: 4
You manage a cloud service that has a web application named WebRole1.
WebRole1 writes error messages to the Windows Event Log.
Users report receiving an error page with the following message: "Event 26 has occurred.
Contact your system administrator."
You need to access the WebRole1 event log.
Which three actions should you perform? Each correct answer presents part of the solution.
A. Update the WebRole1 web.config file.
B. Create a storage account.
C. Update the cloud service definition file and the service configuration file.
D. Run the Set-AzureVMDiagnosticsExtensionPowerShell cmdlet.
E. Run the Enable-AzureWebsiteApplicationDiagnostic PowerShell cmdlet.
F. Enable verbose monitoring.
Answer: B,C,F
Explanation:
step 1 specify the scheduled TransferLogLevelFilter to Verbose in the diagnostics.wadcfg step 2 Update the cloud service definition file and the service configuration file (.cspkg) step 3 best practice is to create a separate storage account for logging diagnostics data
References: http://azure.microsoft.com/en-us/documentation/articles/cloud-services-how-to-monitor/
What you will not find at Ce-Isareti are latest ECBA-Deutsch 65503 .*
F. _65503_
Answer: E
Explanation:
http://www.cisco.com/c/en/us/td/docs/ios/12_2/termserv/configuration/guide/ftersv_c/tcfaap re.html
NEW QUESTION: 3
An engineer has integrated a new DMVPN to link remote offices across the internet using Cisco IOS routers. When connecting to remote sites, pings and voice data appear to flow properly and all tunnel stats seem to show that are up. However, when trying to connect to a remote server using RDP, the connection fails. Which action resolves this issue?
A. Add RDP port to the extended ACL.
B. Replace certificate on the RDP server.
C. Adjust the MTU size within the routers.
D. Change DMVPN timeout values.
Answer: B
NEW QUESTION: 4
You manage a cloud service that has a web application named WebRole1.
WebRole1 writes error messages to the Windows Event Log.
Users report receiving an error page with the following message: "Event 26 has occurred.
Contact your system administrator."
You need to access the WebRole1 event log.
Which three actions should you perform? Each correct answer presents part of the solution.
A. Update the WebRole1 web.config file.
B. Create a storage account.
C. Update the cloud service definition file and the service configuration file.
D. Run the Set-AzureVMDiagnosticsExtensionPowerShell cmdlet.
E. Run the Enable-AzureWebsiteApplicationDiagnostic PowerShell cmdlet.
F. Enable verbose monitoring.
Answer: B,C,F
Explanation:
step 1 specify the scheduled TransferLogLevelFilter to Verbose in the diagnostics.wadcfg step 2 Update the cloud service definition file and the service configuration file (.cspkg) step 3 best practice is to create a separate storage account for logging diagnostics data
References: http://azure.microsoft.com/en-us/documentation/articles/cloud-services-how-to-monitor/
F. _65503_
Answer: E
Explanation:
http://www.cisco.com/c/en/us/td/docs/ios/12_2/termserv/configuration/guide/ftersv_c/tcfaap re.html
NEW QUESTION: 3
An engineer has integrated a new DMVPN to link remote offices across the internet using Cisco IOS routers. When connecting to remote sites, pings and voice data appear to flow properly and all tunnel stats seem to show that are up. However, when trying to connect to a remote server using RDP, the connection fails. Which action resolves this issue?
A. Add RDP port to the extended ACL.
B. Replace certificate on the RDP server.
C. Adjust the MTU size within the routers.
D. Change DMVPN timeout values.
Answer: B
NEW QUESTION: 4
You manage a cloud service that has a web application named WebRole1.
WebRole1 writes error messages to the Windows Event Log.
Users report receiving an error page with the following message: "Event 26 has occurred.
Contact your system administrator."
You need to access the WebRole1 event log.
Which three actions should you perform? Each correct answer presents part of the solution.
A. Update the WebRole1 web.config file.
B. Create a storage account.
C. Update the cloud service definition file and the service configuration file.
D. Run the Set-AzureVMDiagnosticsExtensionPowerShell cmdlet.
E. Run the Enable-AzureWebsiteApplicationDiagnostic PowerShell cmdlet.
F. Enable verbose monitoring.
Answer: B,C,F
Explanation:
step 1 specify the scheduled TransferLogLevelFilter to Verbose in the diagnostics.wadcfg step 2 Update the cloud service definition file and the service configuration file (.cspkg) step 3 best practice is to create a separate storage account for logging diagnostics data
References: http://azure.microsoft.com/en-us/documentation/articles/cloud-services-how-to-monitor/
F. _65503_
Answer: E
Explanation:
http://www.cisco.com/c/en/us/td/docs/ios/12_2/termserv/configuration/guide/ftersv_c/tcfaap re.html
NEW QUESTION: 3
An engineer has integrated a new DMVPN to link remote offices across the internet using Cisco IOS routers. When connecting to remote sites, pings and voice data appear to flow properly and all tunnel stats seem to show that are up. However, when trying to connect to a remote server using RDP, the connection fails. Which action resolves this issue?
A. Add RDP port to the extended ACL.
B. Replace certificate on the RDP server.
C. Adjust the MTU size within the routers.
D. Change DMVPN timeout values.
Answer: B
NEW QUESTION: 4
You manage a cloud service that has a web application named WebRole1.
WebRole1 writes error messages to the Windows Event Log.
Users report receiving an error page with the following message: "Event 26 has occurred.
Contact your system administrator."
You need to access the WebRole1 event log.
Which three actions should you perform? Each correct answer presents part of the solution.
A. Update the WebRole1 web.config file.
B. Create a storage account.
C. Update the cloud service definition file and the service configuration file.
D. Run the Set-AzureVMDiagnosticsExtensionPowerShell cmdlet.
E. Run the Enable-AzureWebsiteApplicationDiagnostic PowerShell cmdlet.
F. Enable verbose monitoring.
Answer: B,C,F
Explanation:
step 1 specify the scheduled TransferLogLevelFilter to Verbose in the diagnostics.wadcfg step 2 Update the cloud service definition file and the service configuration file (.cspkg) step 3 best practice is to create a separate storage account for logging diagnostics data
References: http://azure.microsoft.com/en-us/documentation/articles/cloud-services-how-to-monitor/
- CIPM Testing Engine
- 300-820 Probesfragen
- AD0-E555 PDF Testsoftware
- ACP-01101 Trainingsunterlagen
- PAM-SEN Trainingsunterlagen
- FCP_FGT_AD-7.4 Zertifikatsdemo
- MS-721 Prüfungsinformationen
- MS-721 Deutsch Prüfung
- Salesforce-Data-Cloud Zertifizierungsprüfung
- P3 Zertifizierungsfragen
- H12-425_V2.0 Deutsch
- AI-900-CN Übungsmaterialien
- NSE7_NST-7.2 Quizfragen Und Antworten
- C_THR89_2311 Online Prüfung
- LEED-AP-BD-C Examengine
- AD0-E559 Exam Fragen
- P-S4FIN-2021 Vorbereitung
- LEED-AP-ID-C Prüfungsaufgaben
- HPE2-W09 Deutsch
- C-TS413-2020 Fragenkatalog
- C_C4H620_34 Schulungsunterlagen
F. _65503_
Answer: E
Explanation:
http://www.cisco.com/c/en/us/td/docs/ios/12_2/termserv/configuration/guide/ftersv_c/tcfaap re.html
NEW QUESTION: 3
An engineer has integrated a new DMVPN to link remote offices across the internet using Cisco IOS routers. When connecting to remote sites, pings and voice data appear to flow properly and all tunnel stats seem to show that are up. However, when trying to connect to a remote server using RDP, the connection fails. Which action resolves this issue?
A. Add RDP port to the extended ACL.
B. Replace certificate on the RDP server.
C. Adjust the MTU size within the routers.
D. Change DMVPN timeout values.
Answer: B
NEW QUESTION: 4
You manage a cloud service that has a web application named WebRole1.
WebRole1 writes error messages to the Windows Event Log.
Users report receiving an error page with the following message: "Event 26 has occurred.
Contact your system administrator."
You need to access the WebRole1 event log.
Which three actions should you perform? Each correct answer presents part of the solution.
A. Update the WebRole1 web.config file.
B. Create a storage account.
C. Update the cloud service definition file and the service configuration file.
D. Run the Set-AzureVMDiagnosticsExtensionPowerShell cmdlet.
E. Run the Enable-AzureWebsiteApplicationDiagnostic PowerShell cmdlet.
F. Enable verbose monitoring.
Answer: B,C,F
Explanation:
step 1 specify the scheduled TransferLogLevelFilter to Verbose in the diagnostics.wadcfg step 2 Update the cloud service definition file and the service configuration file (.cspkg) step 3 best practice is to create a separate storage account for logging diagnostics data
References: http://azure.microsoft.com/en-us/documentation/articles/cloud-services-how-to-monitor/
65503 .*
F. _65503_
Answer: E
Explanation:
http://www.cisco.com/c/en/us/td/docs/ios/12_2/termserv/configuration/guide/ftersv_c/tcfaap re.html
NEW QUESTION: 3
An engineer has integrated a new DMVPN to link remote offices across the internet using Cisco IOS routers. When connecting to remote sites, pings and voice data appear to flow properly and all tunnel stats seem to show that are up. However, when trying to connect to a remote server using RDP, the connection fails. Which action resolves this issue?
A. Add RDP port to the extended ACL.
B. Replace certificate on the RDP server.
C. Adjust the MTU size within the routers.
D. Change DMVPN timeout values.
Answer: B
NEW QUESTION: 4
You manage a cloud service that has a web application named WebRole1.
WebRole1 writes error messages to the Windows Event Log.
Users report receiving an error page with the following message: "Event 26 has occurred.
Contact your system administrator."
You need to access the WebRole1 event log.
Which three actions should you perform? Each correct answer presents part of the solution.
A. Update the WebRole1 web.config file.
B. Create a storage account.
C. Update the cloud service definition file and the service configuration file.
D. Run the Set-AzureVMDiagnosticsExtensionPowerShell cmdlet.
E. Run the Enable-AzureWebsiteApplicationDiagnostic PowerShell cmdlet.
F. Enable verbose monitoring.
Answer: B,C,F
Explanation:
step 1 specify the scheduled TransferLogLevelFilter to Verbose in the diagnostics.wadcfg step 2 Update the cloud service definition file and the service configuration file (.cspkg) step 3 best practice is to create a separate storage account for logging diagnostics data
References: http://azure.microsoft.com/en-us/documentation/articles/cloud-services-how-to-monitor/
Proper training for ECBA-Deutsch 65503 .*
F. _65503_
Answer: E
Explanation:
http://www.cisco.com/c/en/us/td/docs/ios/12_2/termserv/configuration/guide/ftersv_c/tcfaap re.html
NEW QUESTION: 3
An engineer has integrated a new DMVPN to link remote offices across the internet using Cisco IOS routers. When connecting to remote sites, pings and voice data appear to flow properly and all tunnel stats seem to show that are up. However, when trying to connect to a remote server using RDP, the connection fails. Which action resolves this issue?
A. Add RDP port to the extended ACL.
B. Replace certificate on the RDP server.
C. Adjust the MTU size within the routers.
D. Change DMVPN timeout values.
Answer: B
NEW QUESTION: 4
You manage a cloud service that has a web application named WebRole1.
WebRole1 writes error messages to the Windows Event Log.
Users report receiving an error page with the following message: "Event 26 has occurred.
Contact your system administrator."
You need to access the WebRole1 event log.
Which three actions should you perform? Each correct answer presents part of the solution.
A. Update the WebRole1 web.config file.
B. Create a storage account.
C. Update the cloud service definition file and the service configuration file.
D. Run the Set-AzureVMDiagnosticsExtensionPowerShell cmdlet.
E. Run the Enable-AzureWebsiteApplicationDiagnostic PowerShell cmdlet.
F. Enable verbose monitoring.
Answer: B,C,F
Explanation:
step 1 specify the scheduled TransferLogLevelFilter to Verbose in the diagnostics.wadcfg step 2 Update the cloud service definition file and the service configuration file (.cspkg) step 3 best practice is to create a separate storage account for logging diagnostics data
References: http://azure.microsoft.com/en-us/documentation/articles/cloud-services-how-to-monitor/
F. _65503_
Answer: E
Explanation:
http://www.cisco.com/c/en/us/td/docs/ios/12_2/termserv/configuration/guide/ftersv_c/tcfaap re.html
NEW QUESTION: 3
An engineer has integrated a new DMVPN to link remote offices across the internet using Cisco IOS routers. When connecting to remote sites, pings and voice data appear to flow properly and all tunnel stats seem to show that are up. However, when trying to connect to a remote server using RDP, the connection fails. Which action resolves this issue?
A. Add RDP port to the extended ACL.
B. Replace certificate on the RDP server.
C. Adjust the MTU size within the routers.
D. Change DMVPN timeout values.
Answer: B
NEW QUESTION: 4
You manage a cloud service that has a web application named WebRole1.
WebRole1 writes error messages to the Windows Event Log.
Users report receiving an error page with the following message: "Event 26 has occurred.
Contact your system administrator."
You need to access the WebRole1 event log.
Which three actions should you perform? Each correct answer presents part of the solution.
A. Update the WebRole1 web.config file.
B. Create a storage account.
C. Update the cloud service definition file and the service configuration file.
D. Run the Set-AzureVMDiagnosticsExtensionPowerShell cmdlet.
E. Run the Enable-AzureWebsiteApplicationDiagnostic PowerShell cmdlet.
F. Enable verbose monitoring.
Answer: B,C,F
Explanation:
step 1 specify the scheduled TransferLogLevelFilter to Verbose in the diagnostics.wadcfg step 2 Update the cloud service definition file and the service configuration file (.cspkg) step 3 best practice is to create a separate storage account for logging diagnostics data
References: http://azure.microsoft.com/en-us/documentation/articles/cloud-services-how-to-monitor/
F. _65503_
Answer: E
Explanation:
http://www.cisco.com/c/en/us/td/docs/ios/12_2/termserv/configuration/guide/ftersv_c/tcfaap re.html
NEW QUESTION: 3
An engineer has integrated a new DMVPN to link remote offices across the internet using Cisco IOS routers. When connecting to remote sites, pings and voice data appear to flow properly and all tunnel stats seem to show that are up. However, when trying to connect to a remote server using RDP, the connection fails. Which action resolves this issue?
A. Add RDP port to the extended ACL.
B. Replace certificate on the RDP server.
C. Adjust the MTU size within the routers.
D. Change DMVPN timeout values.
Answer: B
NEW QUESTION: 4
You manage a cloud service that has a web application named WebRole1.
WebRole1 writes error messages to the Windows Event Log.
Users report receiving an error page with the following message: "Event 26 has occurred.
Contact your system administrator."
You need to access the WebRole1 event log.
Which three actions should you perform? Each correct answer presents part of the solution.
A. Update the WebRole1 web.config file.
B. Create a storage account.
C. Update the cloud service definition file and the service configuration file.
D. Run the Set-AzureVMDiagnosticsExtensionPowerShell cmdlet.
E. Run the Enable-AzureWebsiteApplicationDiagnostic PowerShell cmdlet.
F. Enable verbose monitoring.
Answer: B,C,F
Explanation:
step 1 specify the scheduled TransferLogLevelFilter to Verbose in the diagnostics.wadcfg step 2 Update the cloud service definition file and the service configuration file (.cspkg) step 3 best practice is to create a separate storage account for logging diagnostics data
References: http://azure.microsoft.com/en-us/documentation/articles/cloud-services-how-to-monitor/
F. _65503_
Answer: E
Explanation:
http://www.cisco.com/c/en/us/td/docs/ios/12_2/termserv/configuration/guide/ftersv_c/tcfaap re.html
NEW QUESTION: 3
An engineer has integrated a new DMVPN to link remote offices across the internet using Cisco IOS routers. When connecting to remote sites, pings and voice data appear to flow properly and all tunnel stats seem to show that are up. However, when trying to connect to a remote server using RDP, the connection fails. Which action resolves this issue?
A. Add RDP port to the extended ACL.
B. Replace certificate on the RDP server.
C. Adjust the MTU size within the routers.
D. Change DMVPN timeout values.
Answer: B
NEW QUESTION: 4
You manage a cloud service that has a web application named WebRole1.
WebRole1 writes error messages to the Windows Event Log.
Users report receiving an error page with the following message: "Event 26 has occurred.
Contact your system administrator."
You need to access the WebRole1 event log.
Which three actions should you perform? Each correct answer presents part of the solution.
A. Update the WebRole1 web.config file.
B. Create a storage account.
C. Update the cloud service definition file and the service configuration file.
D. Run the Set-AzureVMDiagnosticsExtensionPowerShell cmdlet.
E. Run the Enable-AzureWebsiteApplicationDiagnostic PowerShell cmdlet.
F. Enable verbose monitoring.
Answer: B,C,F
Explanation:
step 1 specify the scheduled TransferLogLevelFilter to Verbose in the diagnostics.wadcfg step 2 Update the cloud service definition file and the service configuration file (.cspkg) step 3 best practice is to create a separate storage account for logging diagnostics data
References: http://azure.microsoft.com/en-us/documentation/articles/cloud-services-how-to-monitor/
F. _65503_
Answer: E
Explanation:
http://www.cisco.com/c/en/us/td/docs/ios/12_2/termserv/configuration/guide/ftersv_c/tcfaap re.html
NEW QUESTION: 3
An engineer has integrated a new DMVPN to link remote offices across the internet using Cisco IOS routers. When connecting to remote sites, pings and voice data appear to flow properly and all tunnel stats seem to show that are up. However, when trying to connect to a remote server using RDP, the connection fails. Which action resolves this issue?
A. Add RDP port to the extended ACL.
B. Replace certificate on the RDP server.
C. Adjust the MTU size within the routers.
D. Change DMVPN timeout values.
Answer: B
NEW QUESTION: 4
You manage a cloud service that has a web application named WebRole1.
WebRole1 writes error messages to the Windows Event Log.
Users report receiving an error page with the following message: "Event 26 has occurred.
Contact your system administrator."
You need to access the WebRole1 event log.
Which three actions should you perform? Each correct answer presents part of the solution.
A. Update the WebRole1 web.config file.
B. Create a storage account.
C. Update the cloud service definition file and the service configuration file.
D. Run the Set-AzureVMDiagnosticsExtensionPowerShell cmdlet.
E. Run the Enable-AzureWebsiteApplicationDiagnostic PowerShell cmdlet.
F. Enable verbose monitoring.
Answer: B,C,F
Explanation:
step 1 specify the scheduled TransferLogLevelFilter to Verbose in the diagnostics.wadcfg step 2 Update the cloud service definition file and the service configuration file (.cspkg) step 3 best practice is to create a separate storage account for logging diagnostics data
References: http://azure.microsoft.com/en-us/documentation/articles/cloud-services-how-to-monitor/
F. _65503_
Answer: E
Explanation:
http://www.cisco.com/c/en/us/td/docs/ios/12_2/termserv/configuration/guide/ftersv_c/tcfaap re.html
NEW QUESTION: 3
An engineer has integrated a new DMVPN to link remote offices across the internet using Cisco IOS routers. When connecting to remote sites, pings and voice data appear to flow properly and all tunnel stats seem to show that are up. However, when trying to connect to a remote server using RDP, the connection fails. Which action resolves this issue?
A. Add RDP port to the extended ACL.
B. Replace certificate on the RDP server.
C. Adjust the MTU size within the routers.
D. Change DMVPN timeout values.
Answer: B
NEW QUESTION: 4
You manage a cloud service that has a web application named WebRole1.
WebRole1 writes error messages to the Windows Event Log.
Users report receiving an error page with the following message: "Event 26 has occurred.
Contact your system administrator."
You need to access the WebRole1 event log.
Which three actions should you perform? Each correct answer presents part of the solution.
A. Update the WebRole1 web.config file.
B. Create a storage account.
C. Update the cloud service definition file and the service configuration file.
D. Run the Set-AzureVMDiagnosticsExtensionPowerShell cmdlet.
E. Run the Enable-AzureWebsiteApplicationDiagnostic PowerShell cmdlet.
F. Enable verbose monitoring.
Answer: B,C,F
Explanation:
step 1 specify the scheduled TransferLogLevelFilter to Verbose in the diagnostics.wadcfg step 2 Update the cloud service definition file and the service configuration file (.cspkg) step 3 best practice is to create a separate storage account for logging diagnostics data
References: http://azure.microsoft.com/en-us/documentation/articles/cloud-services-how-to-monitor/
F. _65503_
Answer: E
Explanation:
http://www.cisco.com/c/en/us/td/docs/ios/12_2/termserv/configuration/guide/ftersv_c/tcfaap re.html
NEW QUESTION: 3
An engineer has integrated a new DMVPN to link remote offices across the internet using Cisco IOS routers. When connecting to remote sites, pings and voice data appear to flow properly and all tunnel stats seem to show that are up. However, when trying to connect to a remote server using RDP, the connection fails. Which action resolves this issue?
A. Add RDP port to the extended ACL.
B. Replace certificate on the RDP server.
C. Adjust the MTU size within the routers.
D. Change DMVPN timeout values.
Answer: B
NEW QUESTION: 4
You manage a cloud service that has a web application named WebRole1.
WebRole1 writes error messages to the Windows Event Log.
Users report receiving an error page with the following message: "Event 26 has occurred.
Contact your system administrator."
You need to access the WebRole1 event log.
Which three actions should you perform? Each correct answer presents part of the solution.
A. Update the WebRole1 web.config file.
B. Create a storage account.
C. Update the cloud service definition file and the service configuration file.
D. Run the Set-AzureVMDiagnosticsExtensionPowerShell cmdlet.
E. Run the Enable-AzureWebsiteApplicationDiagnostic PowerShell cmdlet.
F. Enable verbose monitoring.
Answer: B,C,F
Explanation:
step 1 specify the scheduled TransferLogLevelFilter to Verbose in the diagnostics.wadcfg step 2 Update the cloud service definition file and the service configuration file (.cspkg) step 3 best practice is to create a separate storage account for logging diagnostics data
References: http://azure.microsoft.com/en-us/documentation/articles/cloud-services-how-to-monitor/
Don't settle for sideline ECBA-Deutsch 65503 .*
F. _65503_
Answer: E
Explanation:
http://www.cisco.com/c/en/us/td/docs/ios/12_2/termserv/configuration/guide/ftersv_c/tcfaap re.html
NEW QUESTION: 3
An engineer has integrated a new DMVPN to link remote offices across the internet using Cisco IOS routers. When connecting to remote sites, pings and voice data appear to flow properly and all tunnel stats seem to show that are up. However, when trying to connect to a remote server using RDP, the connection fails. Which action resolves this issue?
A. Add RDP port to the extended ACL.
B. Replace certificate on the RDP server.
C. Adjust the MTU size within the routers.
D. Change DMVPN timeout values.
Answer: B
NEW QUESTION: 4
You manage a cloud service that has a web application named WebRole1.
WebRole1 writes error messages to the Windows Event Log.
Users report receiving an error page with the following message: "Event 26 has occurred.
Contact your system administrator."
You need to access the WebRole1 event log.
Which three actions should you perform? Each correct answer presents part of the solution.
A. Update the WebRole1 web.config file.
B. Create a storage account.
C. Update the cloud service definition file and the service configuration file.
D. Run the Set-AzureVMDiagnosticsExtensionPowerShell cmdlet.
E. Run the Enable-AzureWebsiteApplicationDiagnostic PowerShell cmdlet.
F. Enable verbose monitoring.
Answer: B,C,F
Explanation:
step 1 specify the scheduled TransferLogLevelFilter to Verbose in the diagnostics.wadcfg step 2 Update the cloud service definition file and the service configuration file (.cspkg) step 3 best practice is to create a separate storage account for logging diagnostics data
References: http://azure.microsoft.com/en-us/documentation/articles/cloud-services-how-to-monitor/
F. _65503_
Answer: E
Explanation:
http://www.cisco.com/c/en/us/td/docs/ios/12_2/termserv/configuration/guide/ftersv_c/tcfaap re.html
NEW QUESTION: 3
An engineer has integrated a new DMVPN to link remote offices across the internet using Cisco IOS routers. When connecting to remote sites, pings and voice data appear to flow properly and all tunnel stats seem to show that are up. However, when trying to connect to a remote server using RDP, the connection fails. Which action resolves this issue?
A. Add RDP port to the extended ACL.
B. Replace certificate on the RDP server.
C. Adjust the MTU size within the routers.
D. Change DMVPN timeout values.
Answer: B
NEW QUESTION: 4
You manage a cloud service that has a web application named WebRole1.
WebRole1 writes error messages to the Windows Event Log.
Users report receiving an error page with the following message: "Event 26 has occurred.
Contact your system administrator."
You need to access the WebRole1 event log.
Which three actions should you perform? Each correct answer presents part of the solution.
A. Update the WebRole1 web.config file.
B. Create a storage account.
C. Update the cloud service definition file and the service configuration file.
D. Run the Set-AzureVMDiagnosticsExtensionPowerShell cmdlet.
E. Run the Enable-AzureWebsiteApplicationDiagnostic PowerShell cmdlet.
F. Enable verbose monitoring.
Answer: B,C,F
Explanation:
step 1 specify the scheduled TransferLogLevelFilter to Verbose in the diagnostics.wadcfg step 2 Update the cloud service definition file and the service configuration file (.cspkg) step 3 best practice is to create a separate storage account for logging diagnostics data
References: http://azure.microsoft.com/en-us/documentation/articles/cloud-services-how-to-monitor/
F. _65503_
Answer: E
Explanation:
http://www.cisco.com/c/en/us/td/docs/ios/12_2/termserv/configuration/guide/ftersv_c/tcfaap re.html
NEW QUESTION: 3
An engineer has integrated a new DMVPN to link remote offices across the internet using Cisco IOS routers. When connecting to remote sites, pings and voice data appear to flow properly and all tunnel stats seem to show that are up. However, when trying to connect to a remote server using RDP, the connection fails. Which action resolves this issue?
A. Add RDP port to the extended ACL.
B. Replace certificate on the RDP server.
C. Adjust the MTU size within the routers.
D. Change DMVPN timeout values.
Answer: B
NEW QUESTION: 4
You manage a cloud service that has a web application named WebRole1.
WebRole1 writes error messages to the Windows Event Log.
Users report receiving an error page with the following message: "Event 26 has occurred.
Contact your system administrator."
You need to access the WebRole1 event log.
Which three actions should you perform? Each correct answer presents part of the solution.
A. Update the WebRole1 web.config file.
B. Create a storage account.
C. Update the cloud service definition file and the service configuration file.
D. Run the Set-AzureVMDiagnosticsExtensionPowerShell cmdlet.
E. Run the Enable-AzureWebsiteApplicationDiagnostic PowerShell cmdlet.
F. Enable verbose monitoring.
Answer: B,C,F
Explanation:
step 1 specify the scheduled TransferLogLevelFilter to Verbose in the diagnostics.wadcfg step 2 Update the cloud service definition file and the service configuration file (.cspkg) step 3 best practice is to create a separate storage account for logging diagnostics data
References: http://azure.microsoft.com/en-us/documentation/articles/cloud-services-how-to-monitor/
F. _65503_
Answer: E
Explanation:
http://www.cisco.com/c/en/us/td/docs/ios/12_2/termserv/configuration/guide/ftersv_c/tcfaap re.html
NEW QUESTION: 3
An engineer has integrated a new DMVPN to link remote offices across the internet using Cisco IOS routers. When connecting to remote sites, pings and voice data appear to flow properly and all tunnel stats seem to show that are up. However, when trying to connect to a remote server using RDP, the connection fails. Which action resolves this issue?
A. Add RDP port to the extended ACL.
B. Replace certificate on the RDP server.
C. Adjust the MTU size within the routers.
D. Change DMVPN timeout values.
Answer: B
NEW QUESTION: 4
You manage a cloud service that has a web application named WebRole1.
WebRole1 writes error messages to the Windows Event Log.
Users report receiving an error page with the following message: "Event 26 has occurred.
Contact your system administrator."
You need to access the WebRole1 event log.
Which three actions should you perform? Each correct answer presents part of the solution.
A. Update the WebRole1 web.config file.
B. Create a storage account.
C. Update the cloud service definition file and the service configuration file.
D. Run the Set-AzureVMDiagnosticsExtensionPowerShell cmdlet.
E. Run the Enable-AzureWebsiteApplicationDiagnostic PowerShell cmdlet.
F. Enable verbose monitoring.
Answer: B,C,F
Explanation:
step 1 specify the scheduled TransferLogLevelFilter to Verbose in the diagnostics.wadcfg step 2 Update the cloud service definition file and the service configuration file (.cspkg) step 3 best practice is to create a separate storage account for logging diagnostics data
References: http://azure.microsoft.com/en-us/documentation/articles/cloud-services-how-to-monitor/
F. _65503_
Answer: E
Explanation:
http://www.cisco.com/c/en/us/td/docs/ios/12_2/termserv/configuration/guide/ftersv_c/tcfaap re.html
NEW QUESTION: 3
An engineer has integrated a new DMVPN to link remote offices across the internet using Cisco IOS routers. When connecting to remote sites, pings and voice data appear to flow properly and all tunnel stats seem to show that are up. However, when trying to connect to a remote server using RDP, the connection fails. Which action resolves this issue?
A. Add RDP port to the extended ACL.
B. Replace certificate on the RDP server.
C. Adjust the MTU size within the routers.
D. Change DMVPN timeout values.
Answer: B
NEW QUESTION: 4
You manage a cloud service that has a web application named WebRole1.
WebRole1 writes error messages to the Windows Event Log.
Users report receiving an error page with the following message: "Event 26 has occurred.
Contact your system administrator."
You need to access the WebRole1 event log.
Which three actions should you perform? Each correct answer presents part of the solution.
A. Update the WebRole1 web.config file.
B. Create a storage account.
C. Update the cloud service definition file and the service configuration file.
D. Run the Set-AzureVMDiagnosticsExtensionPowerShell cmdlet.
E. Run the Enable-AzureWebsiteApplicationDiagnostic PowerShell cmdlet.
F. Enable verbose monitoring.
Answer: B,C,F
Explanation:
step 1 specify the scheduled TransferLogLevelFilter to Verbose in the diagnostics.wadcfg step 2 Update the cloud service definition file and the service configuration file (.cspkg) step 3 best practice is to create a separate storage account for logging diagnostics data
References: http://azure.microsoft.com/en-us/documentation/articles/cloud-services-how-to-monitor/
