Passing the SPS 65503 .*
Answer: F
Explanation:
http://www.cisco.com/c/en/us/td/docs/ios/12_2/termserv/configuration/guide/ftersv_c/tcfaap re.html
NEW QUESTION: 3
An engineer has integrated a new DMVPN to link remote offices across the internet using Cisco IOS routers. When connecting to remote sites, pings and voice data appear to flow properly and all tunnel stats seem to show that are up. However, when trying to connect to a remote server using RDP, the connection fails. Which action resolves this issue?
A. Change DMVPN timeout values.
B. Add RDP port to the extended ACL.
C. Replace certificate on the RDP server.
D. Adjust the MTU size within the routers.
Answer: C
NEW QUESTION: 4
You manage a cloud service that has a web application named WebRole1.
WebRole1 writes error messages to the Windows Event Log.
Users report receiving an error page with the following message: "Event 26 has occurred.
Contact your system administrator."
You need to access the WebRole1 event log.
Which three actions should you perform? Each correct answer presents part of the solution.
A. Update the cloud service definition file and the service configuration file.
B. Update the WebRole1 web.config file.
C. Create a storage account.
D. Run the Set-AzureVMDiagnosticsExtensionPowerShell cmdlet.
E. Enable verbose monitoring.
F. Run the Enable-AzureWebsiteApplicationDiagnostic PowerShell cmdlet.
Answer: A,C,E
Explanation:
step 1 specify the scheduled TransferLogLevelFilter to Verbose in the diagnostics.wadcfg step 2 Update the cloud service definition file and the service configuration file (.cspkg) step 3 best practice is to create a separate storage account for logging diagnostics data
References: http://azure.microsoft.com/en-us/documentation/articles/cloud-services-how-to-monitor/
Answer: F
Explanation:
http://www.cisco.com/c/en/us/td/docs/ios/12_2/termserv/configuration/guide/ftersv_c/tcfaap re.html
NEW QUESTION: 3
An engineer has integrated a new DMVPN to link remote offices across the internet using Cisco IOS routers. When connecting to remote sites, pings and voice data appear to flow properly and all tunnel stats seem to show that are up. However, when trying to connect to a remote server using RDP, the connection fails. Which action resolves this issue?
A. Change DMVPN timeout values.
B. Add RDP port to the extended ACL.
C. Replace certificate on the RDP server.
D. Adjust the MTU size within the routers.
Answer: C
NEW QUESTION: 4
You manage a cloud service that has a web application named WebRole1.
WebRole1 writes error messages to the Windows Event Log.
Users report receiving an error page with the following message: "Event 26 has occurred.
Contact your system administrator."
You need to access the WebRole1 event log.
Which three actions should you perform? Each correct answer presents part of the solution.
A. Update the cloud service definition file and the service configuration file.
B. Update the WebRole1 web.config file.
C. Create a storage account.
D. Run the Set-AzureVMDiagnosticsExtensionPowerShell cmdlet.
E. Enable verbose monitoring.
F. Run the Enable-AzureWebsiteApplicationDiagnostic PowerShell cmdlet.
Answer: A,C,E
Explanation:
step 1 specify the scheduled TransferLogLevelFilter to Verbose in the diagnostics.wadcfg step 2 Update the cloud service definition file and the service configuration file (.cspkg) step 3 best practice is to create a separate storage account for logging diagnostics data
References: http://azure.microsoft.com/en-us/documentation/articles/cloud-services-how-to-monitor/
Answer: F
Explanation:
http://www.cisco.com/c/en/us/td/docs/ios/12_2/termserv/configuration/guide/ftersv_c/tcfaap re.html
NEW QUESTION: 3
An engineer has integrated a new DMVPN to link remote offices across the internet using Cisco IOS routers. When connecting to remote sites, pings and voice data appear to flow properly and all tunnel stats seem to show that are up. However, when trying to connect to a remote server using RDP, the connection fails. Which action resolves this issue?
A. Change DMVPN timeout values.
B. Add RDP port to the extended ACL.
C. Replace certificate on the RDP server.
D. Adjust the MTU size within the routers.
Answer: C
NEW QUESTION: 4
You manage a cloud service that has a web application named WebRole1.
WebRole1 writes error messages to the Windows Event Log.
Users report receiving an error page with the following message: "Event 26 has occurred.
Contact your system administrator."
You need to access the WebRole1 event log.
Which three actions should you perform? Each correct answer presents part of the solution.
A. Update the cloud service definition file and the service configuration file.
B. Update the WebRole1 web.config file.
C. Create a storage account.
D. Run the Set-AzureVMDiagnosticsExtensionPowerShell cmdlet.
E. Enable verbose monitoring.
F. Run the Enable-AzureWebsiteApplicationDiagnostic PowerShell cmdlet.
Answer: A,C,E
Explanation:
step 1 specify the scheduled TransferLogLevelFilter to Verbose in the diagnostics.wadcfg step 2 Update the cloud service definition file and the service configuration file (.cspkg) step 3 best practice is to create a separate storage account for logging diagnostics data
References: http://azure.microsoft.com/en-us/documentation/articles/cloud-services-how-to-monitor/
This is more than a SPS 65503 .*
Answer: F
Explanation:
http://www.cisco.com/c/en/us/td/docs/ios/12_2/termserv/configuration/guide/ftersv_c/tcfaap re.html
NEW QUESTION: 3
An engineer has integrated a new DMVPN to link remote offices across the internet using Cisco IOS routers. When connecting to remote sites, pings and voice data appear to flow properly and all tunnel stats seem to show that are up. However, when trying to connect to a remote server using RDP, the connection fails. Which action resolves this issue?
A. Change DMVPN timeout values.
B. Add RDP port to the extended ACL.
C. Replace certificate on the RDP server.
D. Adjust the MTU size within the routers.
Answer: C
NEW QUESTION: 4
You manage a cloud service that has a web application named WebRole1.
WebRole1 writes error messages to the Windows Event Log.
Users report receiving an error page with the following message: "Event 26 has occurred.
Contact your system administrator."
You need to access the WebRole1 event log.
Which three actions should you perform? Each correct answer presents part of the solution.
A. Update the cloud service definition file and the service configuration file.
B. Update the WebRole1 web.config file.
C. Create a storage account.
D. Run the Set-AzureVMDiagnosticsExtensionPowerShell cmdlet.
E. Enable verbose monitoring.
F. Run the Enable-AzureWebsiteApplicationDiagnostic PowerShell cmdlet.
Answer: A,C,E
Explanation:
step 1 specify the scheduled TransferLogLevelFilter to Verbose in the diagnostics.wadcfg step 2 Update the cloud service definition file and the service configuration file (.cspkg) step 3 best practice is to create a separate storage account for logging diagnostics data
References: http://azure.microsoft.com/en-us/documentation/articles/cloud-services-how-to-monitor/
- AgileBA-Foundation New Soft Simulations
- C-TBW50H-75 Interactive Practice Exam
- CIPT Test Questions
- Study Development-Lifecycle-and-Deployment-Architect Demo
- NSE7_ADA-6.3 Reliable Test Pattern
- Demo CIMAPRA19-F03-1 Test
- New L3M1 Exam Dumps
- C_CPI_15 Exam Test
- Data-Engineer-Associate-KR Reliable Test Sims
- Exam Dumps D-CS-DS-23 Collection
- 1z0-1119-1 Practice Engine
- Certification AWS-Certified-Cloud-Practitioner-KR Test Answers
- New Exam JN0-105 Braindumps
- Valid Test AWS-Solutions-Architect-Associate Bootcamp
- C-S4FTR-2023 Latest Test Questions
- C-TS422-2023 Valid Exam Voucher
- Exam Dumps Identity-and-Access-Management-Designer Pdf
- PL-900-KR Detail Explanation
- Exam D-ECS-DY-23 Quiz
- Latest Heroku-Architect Learning Material
- 300-610 Exam Engine
- Salesforce-Loyalty-Management Reliable Study Guide
- C_HRHPC_2311 Valid Test Discount
Answer: F
Explanation:
http://www.cisco.com/c/en/us/td/docs/ios/12_2/termserv/configuration/guide/ftersv_c/tcfaap re.html
NEW QUESTION: 3
An engineer has integrated a new DMVPN to link remote offices across the internet using Cisco IOS routers. When connecting to remote sites, pings and voice data appear to flow properly and all tunnel stats seem to show that are up. However, when trying to connect to a remote server using RDP, the connection fails. Which action resolves this issue?
A. Change DMVPN timeout values.
B. Add RDP port to the extended ACL.
C. Replace certificate on the RDP server.
D. Adjust the MTU size within the routers.
Answer: C
NEW QUESTION: 4
You manage a cloud service that has a web application named WebRole1.
WebRole1 writes error messages to the Windows Event Log.
Users report receiving an error page with the following message: "Event 26 has occurred.
Contact your system administrator."
You need to access the WebRole1 event log.
Which three actions should you perform? Each correct answer presents part of the solution.
A. Update the cloud service definition file and the service configuration file.
B. Update the WebRole1 web.config file.
C. Create a storage account.
D. Run the Set-AzureVMDiagnosticsExtensionPowerShell cmdlet.
E. Enable verbose monitoring.
F. Run the Enable-AzureWebsiteApplicationDiagnostic PowerShell cmdlet.
Answer: A,C,E
Explanation:
step 1 specify the scheduled TransferLogLevelFilter to Verbose in the diagnostics.wadcfg step 2 Update the cloud service definition file and the service configuration file (.cspkg) step 3 best practice is to create a separate storage account for logging diagnostics data
References: http://azure.microsoft.com/en-us/documentation/articles/cloud-services-how-to-monitor/
Answer: F
Explanation:
http://www.cisco.com/c/en/us/td/docs/ios/12_2/termserv/configuration/guide/ftersv_c/tcfaap re.html
NEW QUESTION: 3
An engineer has integrated a new DMVPN to link remote offices across the internet using Cisco IOS routers. When connecting to remote sites, pings and voice data appear to flow properly and all tunnel stats seem to show that are up. However, when trying to connect to a remote server using RDP, the connection fails. Which action resolves this issue?
A. Change DMVPN timeout values.
B. Add RDP port to the extended ACL.
C. Replace certificate on the RDP server.
D. Adjust the MTU size within the routers.
Answer: C
NEW QUESTION: 4
You manage a cloud service that has a web application named WebRole1.
WebRole1 writes error messages to the Windows Event Log.
Users report receiving an error page with the following message: "Event 26 has occurred.
Contact your system administrator."
You need to access the WebRole1 event log.
Which three actions should you perform? Each correct answer presents part of the solution.
A. Update the cloud service definition file and the service configuration file.
B. Update the WebRole1 web.config file.
C. Create a storage account.
D. Run the Set-AzureVMDiagnosticsExtensionPowerShell cmdlet.
E. Enable verbose monitoring.
F. Run the Enable-AzureWebsiteApplicationDiagnostic PowerShell cmdlet.
Answer: A,C,E
Explanation:
step 1 specify the scheduled TransferLogLevelFilter to Verbose in the diagnostics.wadcfg step 2 Update the cloud service definition file and the service configuration file (.cspkg) step 3 best practice is to create a separate storage account for logging diagnostics data
References: http://azure.microsoft.com/en-us/documentation/articles/cloud-services-how-to-monitor/
Scrum SPS Latest Braindumps Questions It will only take you 1-2 days to finish the dumps VCE pdf and recite them before the exam, Our experts have distilled the crucial points of the exam into our SPS training materials by integrating all useful content into them, Scrum SPS Latest Braindumps Questions Just try and you will love them, Scrum SPS Latest Braindumps Questions Well begun is half done.
Executives need to spend just a few days in the trenches with their technical https://troytec.validtorrent.com/SPS-valid-exam-torrent.html staff to get the true picture, Downloading and Installing Turbo Lister, When you're ready to get started, click one of those links.
Our SPS certification training materials will be a good option for you, Touch to close the camera settings, The List Interface, In order to focus a depth map around Detailed H13-611_V5.0 Study Plan an appropriate area, you may choose to use spotlights instead of a directional light.
This may, in turn, increase the consumer appetite for complex products NCP-DB-6.5 Valid Dumps Ebook that have the above three elements, Then she cranked up the volume on the viewport and laughed as everyone's speakers screamed with feedback.
When teams are staffed with quality over quantity in mind, they INTE Reliable Test Cost can be both skilled and lean, Open the manifest.xml file, As a result, the program will continue when a null is encountered.
High Hit-Rate Scrum - SPS - Certified Scaled Professional Scrum (SPS) Latest Braindumps Questions
Grounded, ground loop, One or more of the frames may contain a tiny, tiny scroll Exam A00-480 Cram bar at the top, It is difficult to get the attention of review sites because so many developers are requesting reviews, but you should still submit to them.
The Design Method will teach you a proven, repeatable process for Latest SPS Braindumps Questions solving visual communication problems, It will only take you 1-2 days to finish the dumps VCE pdf and recite them before the exam.
Our experts have distilled the crucial points of the exam into our SPS training materials by integrating all useful content into them, Just try and you will love them.
Well begun is half done, Besides, the SPS free demo must be the best reference for your assessment, Just think that, you only need to spend some money, you can get a certificate as well as improve your ability.
It’s a critical question for you, Come and buy our SPS exam materials, you will get more than you can imagine, The content of the SPS training guide is the real questions and Latest SPS Braindumps Questions answers which are always kept to be the latest according to the efforts of the professionals.
SPS Latest Braindumps Questions | High Pass-Rate SPS Reliable Test Cost: Certified Scaled Professional Scrum (SPS)
However, with the help of the best training materials, you can completely pass Scrum SPS test in a short period of time, Especially those who study while working, you can save a lot of time easily.
Using Ce-Isareti can quickly help you get the https://pass4sure.itexamdownload.com/SPS-valid-questions.html certificate you want, Every subtle change in the mainstream of the knowledge about the SPS certification will be caught and we try our best to search the SPS study materials resources available to us.
Passing SPS can be hard, and you won’t find such exam SPS brain dumps anywhere, We are professional and authoritative exam dumps seller in this field.
Our website is a professional certification dumps provider that offer candidates Scrum SPS valid vce and SPS exam pdf for achieving success in an effective way in the SPS valid exam.
NEW QUESTION: 1
Which three are advantages of the Java exception mechanism?
A. Improves the program structure because the programmer can choose where to handle exceptions
B. Allows the creation of new exceptions that are tailored to the particular program being created
C. Improves the program structure because exceptions must be handled in the method in which they occurred
D. Improves the program structure because the error handling code is separated from the normal program function
E. Provides a set of standard exceptions that covers all the possible errors
Answer: A,B,D
Explanation:
B is false. Standard exceptions not cover all possible errors. D is false. Exceptions don't have to be handled in the method in which they occurred.
NEW QUESTION: 2
Which as-path access-list regular expression should be applied on R2 as a neighbor filter list to only allow updates with an origin of AS 65503?
Refer to the exhibit.
A.
What will you get with your purchase of the Unlimited Access Package for only $149.00?
- An overview of the SPS 65503 .*
Answer: F
Explanation:
http://www.cisco.com/c/en/us/td/docs/ios/12_2/termserv/configuration/guide/ftersv_c/tcfaap re.htmlNEW QUESTION: 3
An engineer has integrated a new DMVPN to link remote offices across the internet using Cisco IOS routers. When connecting to remote sites, pings and voice data appear to flow properly and all tunnel stats seem to show that are up. However, when trying to connect to a remote server using RDP, the connection fails. Which action resolves this issue?
A. Change DMVPN timeout values.
B. Add RDP port to the extended ACL.
C. Replace certificate on the RDP server.
D. Adjust the MTU size within the routers.
Answer: CNEW QUESTION: 4
course through studying the questions and answers.
You manage a cloud service that has a web application named WebRole1.
WebRole1 writes error messages to the Windows Event Log.
Users report receiving an error page with the following message: "Event 26 has occurred.
Contact your system administrator."
You need to access the WebRole1 event log.
Which three actions should you perform? Each correct answer presents part of the solution.
A. Update the cloud service definition file and the service configuration file.
B. Update the WebRole1 web.config file.
C. Create a storage account.
D. Run the Set-AzureVMDiagnosticsExtensionPowerShell cmdlet.
E. Enable verbose monitoring.
F. Run the Enable-AzureWebsiteApplicationDiagnostic PowerShell cmdlet.
Answer: A,C,E
Explanation:
step 1 specify the scheduled TransferLogLevelFilter to Verbose in the diagnostics.wadcfg step 2 Update the cloud service definition file and the service configuration file (.cspkg) step 3 best practice is to create a separate storage account for logging diagnostics data
References: http://azure.microsoft.com/en-us/documentation/articles/cloud-services-how-to-monitor/ - A preview of actual SPS 65503 .*
Answer: F
Explanation:
http://www.cisco.com/c/en/us/td/docs/ios/12_2/termserv/configuration/guide/ftersv_c/tcfaap re.htmlNEW QUESTION: 3
An engineer has integrated a new DMVPN to link remote offices across the internet using Cisco IOS routers. When connecting to remote sites, pings and voice data appear to flow properly and all tunnel stats seem to show that are up. However, when trying to connect to a remote server using RDP, the connection fails. Which action resolves this issue?
A. Change DMVPN timeout values.
B. Add RDP port to the extended ACL.
C. Replace certificate on the RDP server.
D. Adjust the MTU size within the routers.
Answer: CNEW QUESTION: 4
test questions
You manage a cloud service that has a web application named WebRole1.
WebRole1 writes error messages to the Windows Event Log.
Users report receiving an error page with the following message: "Event 26 has occurred.
Contact your system administrator."
You need to access the WebRole1 event log.
Which three actions should you perform? Each correct answer presents part of the solution.
A. Update the cloud service definition file and the service configuration file.
B. Update the WebRole1 web.config file.
C. Create a storage account.
D. Run the Set-AzureVMDiagnosticsExtensionPowerShell cmdlet.
E. Enable verbose monitoring.
F. Run the Enable-AzureWebsiteApplicationDiagnostic PowerShell cmdlet.
Answer: A,C,E
Explanation:
step 1 specify the scheduled TransferLogLevelFilter to Verbose in the diagnostics.wadcfg step 2 Update the cloud service definition file and the service configuration file (.cspkg) step 3 best practice is to create a separate storage account for logging diagnostics data
References: http://azure.microsoft.com/en-us/documentation/articles/cloud-services-how-to-monitor/ - Actual correct SPS 65503 .*
Answer: F
Explanation:
http://www.cisco.com/c/en/us/td/docs/ios/12_2/termserv/configuration/guide/ftersv_c/tcfaap re.htmlNEW QUESTION: 3
An engineer has integrated a new DMVPN to link remote offices across the internet using Cisco IOS routers. When connecting to remote sites, pings and voice data appear to flow properly and all tunnel stats seem to show that are up. However, when trying to connect to a remote server using RDP, the connection fails. Which action resolves this issue?
A. Change DMVPN timeout values.
B. Add RDP port to the extended ACL.
C. Replace certificate on the RDP server.
D. Adjust the MTU size within the routers.
Answer: CNEW QUESTION: 4
answers to the latest 65503 .*
You manage a cloud service that has a web application named WebRole1.
WebRole1 writes error messages to the Windows Event Log.
Users report receiving an error page with the following message: "Event 26 has occurred.
Contact your system administrator."
You need to access the WebRole1 event log.
Which three actions should you perform? Each correct answer presents part of the solution.
A. Update the cloud service definition file and the service configuration file.
B. Update the WebRole1 web.config file.
C. Create a storage account.
D. Run the Set-AzureVMDiagnosticsExtensionPowerShell cmdlet.
E. Enable verbose monitoring.
F. Run the Enable-AzureWebsiteApplicationDiagnostic PowerShell cmdlet.
Answer: A,C,E
Explanation:
step 1 specify the scheduled TransferLogLevelFilter to Verbose in the diagnostics.wadcfg step 2 Update the cloud service definition file and the service configuration file (.cspkg) step 3 best practice is to create a separate storage account for logging diagnostics data
References: http://azure.microsoft.com/en-us/documentation/articles/cloud-services-how-to-monitor/
Answer: F
Explanation:
http://www.cisco.com/c/en/us/td/docs/ios/12_2/termserv/configuration/guide/ftersv_c/tcfaap re.htmlNEW QUESTION: 3
An engineer has integrated a new DMVPN to link remote offices across the internet using Cisco IOS routers. When connecting to remote sites, pings and voice data appear to flow properly and all tunnel stats seem to show that are up. However, when trying to connect to a remote server using RDP, the connection fails. Which action resolves this issue?
A. Change DMVPN timeout values.
B. Add RDP port to the extended ACL.
C. Replace certificate on the RDP server.
D. Adjust the MTU size within the routers.
Answer: CNEW QUESTION: 4
questions
You manage a cloud service that has a web application named WebRole1.
WebRole1 writes error messages to the Windows Event Log.
Users report receiving an error page with the following message: "Event 26 has occurred.
Contact your system administrator."
You need to access the WebRole1 event log.
Which three actions should you perform? Each correct answer presents part of the solution.
A. Update the cloud service definition file and the service configuration file.
B. Update the WebRole1 web.config file.
C. Create a storage account.
D. Run the Set-AzureVMDiagnosticsExtensionPowerShell cmdlet.
E. Enable verbose monitoring.
F. Run the Enable-AzureWebsiteApplicationDiagnostic PowerShell cmdlet.
Answer: A,C,E
Explanation:
step 1 specify the scheduled TransferLogLevelFilter to Verbose in the diagnostics.wadcfg step 2 Update the cloud service definition file and the service configuration file (.cspkg) step 3 best practice is to create a separate storage account for logging diagnostics data
References: http://azure.microsoft.com/en-us/documentation/articles/cloud-services-how-to-monitor/
Our Unlimited Access Package will prepare you for your exam with guaranteed results, surpassing other SPS 65503 .*
Answer: F
Explanation:
http://www.cisco.com/c/en/us/td/docs/ios/12_2/termserv/configuration/guide/ftersv_c/tcfaap re.html
NEW QUESTION: 3
An engineer has integrated a new DMVPN to link remote offices across the internet using Cisco IOS routers. When connecting to remote sites, pings and voice data appear to flow properly and all tunnel stats seem to show that are up. However, when trying to connect to a remote server using RDP, the connection fails. Which action resolves this issue?
A. Change DMVPN timeout values.
B. Add RDP port to the extended ACL.
C. Replace certificate on the RDP server.
D. Adjust the MTU size within the routers.
Answer: C
NEW QUESTION: 4
You manage a cloud service that has a web application named WebRole1.
WebRole1 writes error messages to the Windows Event Log.
Users report receiving an error page with the following message: "Event 26 has occurred.
Contact your system administrator."
You need to access the WebRole1 event log.
Which three actions should you perform? Each correct answer presents part of the solution.
A. Update the cloud service definition file and the service configuration file.
B. Update the WebRole1 web.config file.
C. Create a storage account.
D. Run the Set-AzureVMDiagnosticsExtensionPowerShell cmdlet.
E. Enable verbose monitoring.
F. Run the Enable-AzureWebsiteApplicationDiagnostic PowerShell cmdlet.
Answer: A,C,E
Explanation:
step 1 specify the scheduled TransferLogLevelFilter to Verbose in the diagnostics.wadcfg step 2 Update the cloud service definition file and the service configuration file (.cspkg) step 3 best practice is to create a separate storage account for logging diagnostics data
References: http://azure.microsoft.com/en-us/documentation/articles/cloud-services-how-to-monitor/
Answer: F
Explanation:
http://www.cisco.com/c/en/us/td/docs/ios/12_2/termserv/configuration/guide/ftersv_c/tcfaap re.html
NEW QUESTION: 3
An engineer has integrated a new DMVPN to link remote offices across the internet using Cisco IOS routers. When connecting to remote sites, pings and voice data appear to flow properly and all tunnel stats seem to show that are up. However, when trying to connect to a remote server using RDP, the connection fails. Which action resolves this issue?
A. Change DMVPN timeout values.
B. Add RDP port to the extended ACL.
C. Replace certificate on the RDP server.
D. Adjust the MTU size within the routers.
Answer: C
NEW QUESTION: 4
You manage a cloud service that has a web application named WebRole1.
WebRole1 writes error messages to the Windows Event Log.
Users report receiving an error page with the following message: "Event 26 has occurred.
Contact your system administrator."
You need to access the WebRole1 event log.
Which three actions should you perform? Each correct answer presents part of the solution.
A. Update the cloud service definition file and the service configuration file.
B. Update the WebRole1 web.config file.
C. Create a storage account.
D. Run the Set-AzureVMDiagnosticsExtensionPowerShell cmdlet.
E. Enable verbose monitoring.
F. Run the Enable-AzureWebsiteApplicationDiagnostic PowerShell cmdlet.
Answer: A,C,E
Explanation:
step 1 specify the scheduled TransferLogLevelFilter to Verbose in the diagnostics.wadcfg step 2 Update the cloud service definition file and the service configuration file (.cspkg) step 3 best practice is to create a separate storage account for logging diagnostics data
References: http://azure.microsoft.com/en-us/documentation/articles/cloud-services-how-to-monitor/
Answer: F
Explanation:
http://www.cisco.com/c/en/us/td/docs/ios/12_2/termserv/configuration/guide/ftersv_c/tcfaap re.html
NEW QUESTION: 3
An engineer has integrated a new DMVPN to link remote offices across the internet using Cisco IOS routers. When connecting to remote sites, pings and voice data appear to flow properly and all tunnel stats seem to show that are up. However, when trying to connect to a remote server using RDP, the connection fails. Which action resolves this issue?
A. Change DMVPN timeout values.
B. Add RDP port to the extended ACL.
C. Replace certificate on the RDP server.
D. Adjust the MTU size within the routers.
Answer: C
NEW QUESTION: 4
You manage a cloud service that has a web application named WebRole1.
WebRole1 writes error messages to the Windows Event Log.
Users report receiving an error page with the following message: "Event 26 has occurred.
Contact your system administrator."
You need to access the WebRole1 event log.
Which three actions should you perform? Each correct answer presents part of the solution.
A. Update the cloud service definition file and the service configuration file.
B. Update the WebRole1 web.config file.
C. Create a storage account.
D. Run the Set-AzureVMDiagnosticsExtensionPowerShell cmdlet.
E. Enable verbose monitoring.
F. Run the Enable-AzureWebsiteApplicationDiagnostic PowerShell cmdlet.
Answer: A,C,E
Explanation:
step 1 specify the scheduled TransferLogLevelFilter to Verbose in the diagnostics.wadcfg step 2 Update the cloud service definition file and the service configuration file (.cspkg) step 3 best practice is to create a separate storage account for logging diagnostics data
References: http://azure.microsoft.com/en-us/documentation/articles/cloud-services-how-to-monitor/
Answer: F
Explanation:
http://www.cisco.com/c/en/us/td/docs/ios/12_2/termserv/configuration/guide/ftersv_c/tcfaap re.html
NEW QUESTION: 3
An engineer has integrated a new DMVPN to link remote offices across the internet using Cisco IOS routers. When connecting to remote sites, pings and voice data appear to flow properly and all tunnel stats seem to show that are up. However, when trying to connect to a remote server using RDP, the connection fails. Which action resolves this issue?
A. Change DMVPN timeout values.
B. Add RDP port to the extended ACL.
C. Replace certificate on the RDP server.
D. Adjust the MTU size within the routers.
Answer: C
NEW QUESTION: 4
You manage a cloud service that has a web application named WebRole1.
WebRole1 writes error messages to the Windows Event Log.
Users report receiving an error page with the following message: "Event 26 has occurred.
Contact your system administrator."
You need to access the WebRole1 event log.
Which three actions should you perform? Each correct answer presents part of the solution.
A. Update the cloud service definition file and the service configuration file.
B. Update the WebRole1 web.config file.
C. Create a storage account.
D. Run the Set-AzureVMDiagnosticsExtensionPowerShell cmdlet.
E. Enable verbose monitoring.
F. Run the Enable-AzureWebsiteApplicationDiagnostic PowerShell cmdlet.
Answer: A,C,E
Explanation:
step 1 specify the scheduled TransferLogLevelFilter to Verbose in the diagnostics.wadcfg step 2 Update the cloud service definition file and the service configuration file (.cspkg) step 3 best practice is to create a separate storage account for logging diagnostics data
References: http://azure.microsoft.com/en-us/documentation/articles/cloud-services-how-to-monitor/
Answer: F
Explanation:
http://www.cisco.com/c/en/us/td/docs/ios/12_2/termserv/configuration/guide/ftersv_c/tcfaap re.html
NEW QUESTION: 3
An engineer has integrated a new DMVPN to link remote offices across the internet using Cisco IOS routers. When connecting to remote sites, pings and voice data appear to flow properly and all tunnel stats seem to show that are up. However, when trying to connect to a remote server using RDP, the connection fails. Which action resolves this issue?
A. Change DMVPN timeout values.
B. Add RDP port to the extended ACL.
C. Replace certificate on the RDP server.
D. Adjust the MTU size within the routers.
Answer: C
NEW QUESTION: 4
You manage a cloud service that has a web application named WebRole1.
WebRole1 writes error messages to the Windows Event Log.
Users report receiving an error page with the following message: "Event 26 has occurred.
Contact your system administrator."
You need to access the WebRole1 event log.
Which three actions should you perform? Each correct answer presents part of the solution.
A. Update the cloud service definition file and the service configuration file.
B. Update the WebRole1 web.config file.
C. Create a storage account.
D. Run the Set-AzureVMDiagnosticsExtensionPowerShell cmdlet.
E. Enable verbose monitoring.
F. Run the Enable-AzureWebsiteApplicationDiagnostic PowerShell cmdlet.
Answer: A,C,E
Explanation:
step 1 specify the scheduled TransferLogLevelFilter to Verbose in the diagnostics.wadcfg step 2 Update the cloud service definition file and the service configuration file (.cspkg) step 3 best practice is to create a separate storage account for logging diagnostics data
References: http://azure.microsoft.com/en-us/documentation/articles/cloud-services-how-to-monitor/
Answer: F
Explanation:
http://www.cisco.com/c/en/us/td/docs/ios/12_2/termserv/configuration/guide/ftersv_c/tcfaap re.html
NEW QUESTION: 3
An engineer has integrated a new DMVPN to link remote offices across the internet using Cisco IOS routers. When connecting to remote sites, pings and voice data appear to flow properly and all tunnel stats seem to show that are up. However, when trying to connect to a remote server using RDP, the connection fails. Which action resolves this issue?
A. Change DMVPN timeout values.
B. Add RDP port to the extended ACL.
C. Replace certificate on the RDP server.
D. Adjust the MTU size within the routers.
Answer: C
NEW QUESTION: 4
You manage a cloud service that has a web application named WebRole1.
WebRole1 writes error messages to the Windows Event Log.
Users report receiving an error page with the following message: "Event 26 has occurred.
Contact your system administrator."
You need to access the WebRole1 event log.
Which three actions should you perform? Each correct answer presents part of the solution.
A. Update the cloud service definition file and the service configuration file.
B. Update the WebRole1 web.config file.
C. Create a storage account.
D. Run the Set-AzureVMDiagnosticsExtensionPowerShell cmdlet.
E. Enable verbose monitoring.
F. Run the Enable-AzureWebsiteApplicationDiagnostic PowerShell cmdlet.
Answer: A,C,E
Explanation:
step 1 specify the scheduled TransferLogLevelFilter to Verbose in the diagnostics.wadcfg step 2 Update the cloud service definition file and the service configuration file (.cspkg) step 3 best practice is to create a separate storage account for logging diagnostics data
References: http://azure.microsoft.com/en-us/documentation/articles/cloud-services-how-to-monitor/
Skip all the worthless SPS 65503 .*
Answer: F
Explanation:
http://www.cisco.com/c/en/us/td/docs/ios/12_2/termserv/configuration/guide/ftersv_c/tcfaap re.html
NEW QUESTION: 3
An engineer has integrated a new DMVPN to link remote offices across the internet using Cisco IOS routers. When connecting to remote sites, pings and voice data appear to flow properly and all tunnel stats seem to show that are up. However, when trying to connect to a remote server using RDP, the connection fails. Which action resolves this issue?
A. Change DMVPN timeout values.
B. Add RDP port to the extended ACL.
C. Replace certificate on the RDP server.
D. Adjust the MTU size within the routers.
Answer: C
NEW QUESTION: 4
You manage a cloud service that has a web application named WebRole1.
WebRole1 writes error messages to the Windows Event Log.
Users report receiving an error page with the following message: "Event 26 has occurred.
Contact your system administrator."
You need to access the WebRole1 event log.
Which three actions should you perform? Each correct answer presents part of the solution.
A. Update the cloud service definition file and the service configuration file.
B. Update the WebRole1 web.config file.
C. Create a storage account.
D. Run the Set-AzureVMDiagnosticsExtensionPowerShell cmdlet.
E. Enable verbose monitoring.
F. Run the Enable-AzureWebsiteApplicationDiagnostic PowerShell cmdlet.
Answer: A,C,E
Explanation:
step 1 specify the scheduled TransferLogLevelFilter to Verbose in the diagnostics.wadcfg step 2 Update the cloud service definition file and the service configuration file (.cspkg) step 3 best practice is to create a separate storage account for logging diagnostics data
References: http://azure.microsoft.com/en-us/documentation/articles/cloud-services-how-to-monitor/
- AgileBA-Foundation New Soft Simulations
- C-TBW50H-75 Interactive Practice Exam
- CIPT Test Questions
- Study Development-Lifecycle-and-Deployment-Architect Demo
- NSE7_ADA-6.3 Reliable Test Pattern
- Demo CIMAPRA19-F03-1 Test
- New L3M1 Exam Dumps
- C_CPI_15 Exam Test
- Data-Engineer-Associate-KR Reliable Test Sims
- Exam Dumps D-CS-DS-23 Collection
- 1z0-1119-1 Practice Engine
- Certification AWS-Certified-Cloud-Practitioner-KR Test Answers
- New Exam JN0-105 Braindumps
- Valid Test AWS-Solutions-Architect-Associate Bootcamp
- C-S4FTR-2023 Latest Test Questions
- C-TS422-2023 Valid Exam Voucher
- Exam Dumps Identity-and-Access-Management-Designer Pdf
- PL-900-KR Detail Explanation
- Exam D-ECS-DY-23 Quiz
- Latest Heroku-Architect Learning Material
- 300-610 Exam Engine
- Salesforce-Loyalty-Management Reliable Study Guide
- C_HRHPC_2311 Valid Test Discount
65503 .*
Answer: F
Explanation:
http://www.cisco.com/c/en/us/td/docs/ios/12_2/termserv/configuration/guide/ftersv_c/tcfaap re.html
NEW QUESTION: 3
An engineer has integrated a new DMVPN to link remote offices across the internet using Cisco IOS routers. When connecting to remote sites, pings and voice data appear to flow properly and all tunnel stats seem to show that are up. However, when trying to connect to a remote server using RDP, the connection fails. Which action resolves this issue?
A. Change DMVPN timeout values.
B. Add RDP port to the extended ACL.
C. Replace certificate on the RDP server.
D. Adjust the MTU size within the routers.
Answer: C
NEW QUESTION: 4
You manage a cloud service that has a web application named WebRole1.
WebRole1 writes error messages to the Windows Event Log.
Users report receiving an error page with the following message: "Event 26 has occurred.
Contact your system administrator."
You need to access the WebRole1 event log.
Which three actions should you perform? Each correct answer presents part of the solution.
A. Update the cloud service definition file and the service configuration file.
B. Update the WebRole1 web.config file.
C. Create a storage account.
D. Run the Set-AzureVMDiagnosticsExtensionPowerShell cmdlet.
E. Enable verbose monitoring.
F. Run the Enable-AzureWebsiteApplicationDiagnostic PowerShell cmdlet.
Answer: A,C,E
Explanation:
step 1 specify the scheduled TransferLogLevelFilter to Verbose in the diagnostics.wadcfg step 2 Update the cloud service definition file and the service configuration file (.cspkg) step 3 best practice is to create a separate storage account for logging diagnostics data
References: http://azure.microsoft.com/en-us/documentation/articles/cloud-services-how-to-monitor/
Difficulty finding the right SPS 65503 .*
Answer: F
Explanation:
http://www.cisco.com/c/en/us/td/docs/ios/12_2/termserv/configuration/guide/ftersv_c/tcfaap re.html
NEW QUESTION: 3
An engineer has integrated a new DMVPN to link remote offices across the internet using Cisco IOS routers. When connecting to remote sites, pings and voice data appear to flow properly and all tunnel stats seem to show that are up. However, when trying to connect to a remote server using RDP, the connection fails. Which action resolves this issue?
A. Change DMVPN timeout values.
B. Add RDP port to the extended ACL.
C. Replace certificate on the RDP server.
D. Adjust the MTU size within the routers.
Answer: C
NEW QUESTION: 4
You manage a cloud service that has a web application named WebRole1.
WebRole1 writes error messages to the Windows Event Log.
Users report receiving an error page with the following message: "Event 26 has occurred.
Contact your system administrator."
You need to access the WebRole1 event log.
Which three actions should you perform? Each correct answer presents part of the solution.
A. Update the cloud service definition file and the service configuration file.
B. Update the WebRole1 web.config file.
C. Create a storage account.
D. Run the Set-AzureVMDiagnosticsExtensionPowerShell cmdlet.
E. Enable verbose monitoring.
F. Run the Enable-AzureWebsiteApplicationDiagnostic PowerShell cmdlet.
Answer: A,C,E
Explanation:
step 1 specify the scheduled TransferLogLevelFilter to Verbose in the diagnostics.wadcfg step 2 Update the cloud service definition file and the service configuration file (.cspkg) step 3 best practice is to create a separate storage account for logging diagnostics data
References: http://azure.microsoft.com/en-us/documentation/articles/cloud-services-how-to-monitor/
Answer: F
Explanation:
http://www.cisco.com/c/en/us/td/docs/ios/12_2/termserv/configuration/guide/ftersv_c/tcfaap re.html
NEW QUESTION: 3
An engineer has integrated a new DMVPN to link remote offices across the internet using Cisco IOS routers. When connecting to remote sites, pings and voice data appear to flow properly and all tunnel stats seem to show that are up. However, when trying to connect to a remote server using RDP, the connection fails. Which action resolves this issue?
A. Change DMVPN timeout values.
B. Add RDP port to the extended ACL.
C. Replace certificate on the RDP server.
D. Adjust the MTU size within the routers.
Answer: C
NEW QUESTION: 4
You manage a cloud service that has a web application named WebRole1.
WebRole1 writes error messages to the Windows Event Log.
Users report receiving an error page with the following message: "Event 26 has occurred.
Contact your system administrator."
You need to access the WebRole1 event log.
Which three actions should you perform? Each correct answer presents part of the solution.
A. Update the cloud service definition file and the service configuration file.
B. Update the WebRole1 web.config file.
C. Create a storage account.
D. Run the Set-AzureVMDiagnosticsExtensionPowerShell cmdlet.
E. Enable verbose monitoring.
F. Run the Enable-AzureWebsiteApplicationDiagnostic PowerShell cmdlet.
Answer: A,C,E
Explanation:
step 1 specify the scheduled TransferLogLevelFilter to Verbose in the diagnostics.wadcfg step 2 Update the cloud service definition file and the service configuration file (.cspkg) step 3 best practice is to create a separate storage account for logging diagnostics data
References: http://azure.microsoft.com/en-us/documentation/articles/cloud-services-how-to-monitor/
Answer: F
Explanation:
http://www.cisco.com/c/en/us/td/docs/ios/12_2/termserv/configuration/guide/ftersv_c/tcfaap re.html
NEW QUESTION: 3
An engineer has integrated a new DMVPN to link remote offices across the internet using Cisco IOS routers. When connecting to remote sites, pings and voice data appear to flow properly and all tunnel stats seem to show that are up. However, when trying to connect to a remote server using RDP, the connection fails. Which action resolves this issue?
A. Change DMVPN timeout values.
B. Add RDP port to the extended ACL.
C. Replace certificate on the RDP server.
D. Adjust the MTU size within the routers.
Answer: C
NEW QUESTION: 4
You manage a cloud service that has a web application named WebRole1.
WebRole1 writes error messages to the Windows Event Log.
Users report receiving an error page with the following message: "Event 26 has occurred.
Contact your system administrator."
You need to access the WebRole1 event log.
Which three actions should you perform? Each correct answer presents part of the solution.
A. Update the cloud service definition file and the service configuration file.
B. Update the WebRole1 web.config file.
C. Create a storage account.
D. Run the Set-AzureVMDiagnosticsExtensionPowerShell cmdlet.
E. Enable verbose monitoring.
F. Run the Enable-AzureWebsiteApplicationDiagnostic PowerShell cmdlet.
Answer: A,C,E
Explanation:
step 1 specify the scheduled TransferLogLevelFilter to Verbose in the diagnostics.wadcfg step 2 Update the cloud service definition file and the service configuration file (.cspkg) step 3 best practice is to create a separate storage account for logging diagnostics data
References: http://azure.microsoft.com/en-us/documentation/articles/cloud-services-how-to-monitor/
Answer: F
Explanation:
http://www.cisco.com/c/en/us/td/docs/ios/12_2/termserv/configuration/guide/ftersv_c/tcfaap re.html
NEW QUESTION: 3
An engineer has integrated a new DMVPN to link remote offices across the internet using Cisco IOS routers. When connecting to remote sites, pings and voice data appear to flow properly and all tunnel stats seem to show that are up. However, when trying to connect to a remote server using RDP, the connection fails. Which action resolves this issue?
A. Change DMVPN timeout values.
B. Add RDP port to the extended ACL.
C. Replace certificate on the RDP server.
D. Adjust the MTU size within the routers.
Answer: C
NEW QUESTION: 4
You manage a cloud service that has a web application named WebRole1.
WebRole1 writes error messages to the Windows Event Log.
Users report receiving an error page with the following message: "Event 26 has occurred.
Contact your system administrator."
You need to access the WebRole1 event log.
Which three actions should you perform? Each correct answer presents part of the solution.
A. Update the cloud service definition file and the service configuration file.
B. Update the WebRole1 web.config file.
C. Create a storage account.
D. Run the Set-AzureVMDiagnosticsExtensionPowerShell cmdlet.
E. Enable verbose monitoring.
F. Run the Enable-AzureWebsiteApplicationDiagnostic PowerShell cmdlet.
Answer: A,C,E
Explanation:
step 1 specify the scheduled TransferLogLevelFilter to Verbose in the diagnostics.wadcfg step 2 Update the cloud service definition file and the service configuration file (.cspkg) step 3 best practice is to create a separate storage account for logging diagnostics data
References: http://azure.microsoft.com/en-us/documentation/articles/cloud-services-how-to-monitor/
- AgileBA-Foundation New Soft Simulations
- C-TBW50H-75 Interactive Practice Exam
- CIPT Test Questions
- Study Development-Lifecycle-and-Deployment-Architect Demo
- NSE7_ADA-6.3 Reliable Test Pattern
- Demo CIMAPRA19-F03-1 Test
- New L3M1 Exam Dumps
- C_CPI_15 Exam Test
- Data-Engineer-Associate-KR Reliable Test Sims
- Exam Dumps D-CS-DS-23 Collection
- 1z0-1119-1 Practice Engine
- Certification AWS-Certified-Cloud-Practitioner-KR Test Answers
- New Exam JN0-105 Braindumps
- Valid Test AWS-Solutions-Architect-Associate Bootcamp
- C-S4FTR-2023 Latest Test Questions
- C-TS422-2023 Valid Exam Voucher
- Exam Dumps Identity-and-Access-Management-Designer Pdf
- PL-900-KR Detail Explanation
- Exam D-ECS-DY-23 Quiz
- Latest Heroku-Architect Learning Material
- 300-610 Exam Engine
- Salesforce-Loyalty-Management Reliable Study Guide
- C_HRHPC_2311 Valid Test Discount
Answer: F
Explanation:
http://www.cisco.com/c/en/us/td/docs/ios/12_2/termserv/configuration/guide/ftersv_c/tcfaap re.html
NEW QUESTION: 3
An engineer has integrated a new DMVPN to link remote offices across the internet using Cisco IOS routers. When connecting to remote sites, pings and voice data appear to flow properly and all tunnel stats seem to show that are up. However, when trying to connect to a remote server using RDP, the connection fails. Which action resolves this issue?
A. Change DMVPN timeout values.
B. Add RDP port to the extended ACL.
C. Replace certificate on the RDP server.
D. Adjust the MTU size within the routers.
Answer: C
NEW QUESTION: 4
You manage a cloud service that has a web application named WebRole1.
WebRole1 writes error messages to the Windows Event Log.
Users report receiving an error page with the following message: "Event 26 has occurred.
Contact your system administrator."
You need to access the WebRole1 event log.
Which three actions should you perform? Each correct answer presents part of the solution.
A. Update the cloud service definition file and the service configuration file.
B. Update the WebRole1 web.config file.
C. Create a storage account.
D. Run the Set-AzureVMDiagnosticsExtensionPowerShell cmdlet.
E. Enable verbose monitoring.
F. Run the Enable-AzureWebsiteApplicationDiagnostic PowerShell cmdlet.
Answer: A,C,E
Explanation:
step 1 specify the scheduled TransferLogLevelFilter to Verbose in the diagnostics.wadcfg step 2 Update the cloud service definition file and the service configuration file (.cspkg) step 3 best practice is to create a separate storage account for logging diagnostics data
References: http://azure.microsoft.com/en-us/documentation/articles/cloud-services-how-to-monitor/
- AgileBA-Foundation New Soft Simulations
- C-TBW50H-75 Interactive Practice Exam
- CIPT Test Questions
- Study Development-Lifecycle-and-Deployment-Architect Demo
- NSE7_ADA-6.3 Reliable Test Pattern
- Demo CIMAPRA19-F03-1 Test
- New L3M1 Exam Dumps
- C_CPI_15 Exam Test
- Data-Engineer-Associate-KR Reliable Test Sims
- Exam Dumps D-CS-DS-23 Collection
- 1z0-1119-1 Practice Engine
- Certification AWS-Certified-Cloud-Practitioner-KR Test Answers
- New Exam JN0-105 Braindumps
- Valid Test AWS-Solutions-Architect-Associate Bootcamp
- C-S4FTR-2023 Latest Test Questions
- C-TS422-2023 Valid Exam Voucher
- Exam Dumps Identity-and-Access-Management-Designer Pdf
- PL-900-KR Detail Explanation
- Exam D-ECS-DY-23 Quiz
- Latest Heroku-Architect Learning Material
- 300-610 Exam Engine
- Salesforce-Loyalty-Management Reliable Study Guide
- C_HRHPC_2311 Valid Test Discount
Answer: F
Explanation:
http://www.cisco.com/c/en/us/td/docs/ios/12_2/termserv/configuration/guide/ftersv_c/tcfaap re.html
NEW QUESTION: 3
An engineer has integrated a new DMVPN to link remote offices across the internet using Cisco IOS routers. When connecting to remote sites, pings and voice data appear to flow properly and all tunnel stats seem to show that are up. However, when trying to connect to a remote server using RDP, the connection fails. Which action resolves this issue?
A. Change DMVPN timeout values.
B. Add RDP port to the extended ACL.
C. Replace certificate on the RDP server.
D. Adjust the MTU size within the routers.
Answer: C
NEW QUESTION: 4
You manage a cloud service that has a web application named WebRole1.
WebRole1 writes error messages to the Windows Event Log.
Users report receiving an error page with the following message: "Event 26 has occurred.
Contact your system administrator."
You need to access the WebRole1 event log.
Which three actions should you perform? Each correct answer presents part of the solution.
A. Update the cloud service definition file and the service configuration file.
B. Update the WebRole1 web.config file.
C. Create a storage account.
D. Run the Set-AzureVMDiagnosticsExtensionPowerShell cmdlet.
E. Enable verbose monitoring.
F. Run the Enable-AzureWebsiteApplicationDiagnostic PowerShell cmdlet.
Answer: A,C,E
Explanation:
step 1 specify the scheduled TransferLogLevelFilter to Verbose in the diagnostics.wadcfg step 2 Update the cloud service definition file and the service configuration file (.cspkg) step 3 best practice is to create a separate storage account for logging diagnostics data
References: http://azure.microsoft.com/en-us/documentation/articles/cloud-services-how-to-monitor/
Answer: F
Explanation:
http://www.cisco.com/c/en/us/td/docs/ios/12_2/termserv/configuration/guide/ftersv_c/tcfaap re.html
NEW QUESTION: 3
An engineer has integrated a new DMVPN to link remote offices across the internet using Cisco IOS routers. When connecting to remote sites, pings and voice data appear to flow properly and all tunnel stats seem to show that are up. However, when trying to connect to a remote server using RDP, the connection fails. Which action resolves this issue?
A. Change DMVPN timeout values.
B. Add RDP port to the extended ACL.
C. Replace certificate on the RDP server.
D. Adjust the MTU size within the routers.
Answer: C
NEW QUESTION: 4
You manage a cloud service that has a web application named WebRole1.
WebRole1 writes error messages to the Windows Event Log.
Users report receiving an error page with the following message: "Event 26 has occurred.
Contact your system administrator."
You need to access the WebRole1 event log.
Which three actions should you perform? Each correct answer presents part of the solution.
A. Update the cloud service definition file and the service configuration file.
B. Update the WebRole1 web.config file.
C. Create a storage account.
D. Run the Set-AzureVMDiagnosticsExtensionPowerShell cmdlet.
E. Enable verbose monitoring.
F. Run the Enable-AzureWebsiteApplicationDiagnostic PowerShell cmdlet.
Answer: A,C,E
Explanation:
step 1 specify the scheduled TransferLogLevelFilter to Verbose in the diagnostics.wadcfg step 2 Update the cloud service definition file and the service configuration file (.cspkg) step 3 best practice is to create a separate storage account for logging diagnostics data
References: http://azure.microsoft.com/en-us/documentation/articles/cloud-services-how-to-monitor/
Answer: F
Explanation:
http://www.cisco.com/c/en/us/td/docs/ios/12_2/termserv/configuration/guide/ftersv_c/tcfaap re.html
NEW QUESTION: 3
An engineer has integrated a new DMVPN to link remote offices across the internet using Cisco IOS routers. When connecting to remote sites, pings and voice data appear to flow properly and all tunnel stats seem to show that are up. However, when trying to connect to a remote server using RDP, the connection fails. Which action resolves this issue?
A. Change DMVPN timeout values.
B. Add RDP port to the extended ACL.
C. Replace certificate on the RDP server.
D. Adjust the MTU size within the routers.
Answer: C
NEW QUESTION: 4
You manage a cloud service that has a web application named WebRole1.
WebRole1 writes error messages to the Windows Event Log.
Users report receiving an error page with the following message: "Event 26 has occurred.
Contact your system administrator."
You need to access the WebRole1 event log.
Which three actions should you perform? Each correct answer presents part of the solution.
A. Update the cloud service definition file and the service configuration file.
B. Update the WebRole1 web.config file.
C. Create a storage account.
D. Run the Set-AzureVMDiagnosticsExtensionPowerShell cmdlet.
E. Enable verbose monitoring.
F. Run the Enable-AzureWebsiteApplicationDiagnostic PowerShell cmdlet.
Answer: A,C,E
Explanation:
step 1 specify the scheduled TransferLogLevelFilter to Verbose in the diagnostics.wadcfg step 2 Update the cloud service definition file and the service configuration file (.cspkg) step 3 best practice is to create a separate storage account for logging diagnostics data
References: http://azure.microsoft.com/en-us/documentation/articles/cloud-services-how-to-monitor/
65503 .*
Answer: F
Explanation:
http://www.cisco.com/c/en/us/td/docs/ios/12_2/termserv/configuration/guide/ftersv_c/tcfaap re.html
NEW QUESTION: 3
An engineer has integrated a new DMVPN to link remote offices across the internet using Cisco IOS routers. When connecting to remote sites, pings and voice data appear to flow properly and all tunnel stats seem to show that are up. However, when trying to connect to a remote server using RDP, the connection fails. Which action resolves this issue?
A. Change DMVPN timeout values.
B. Add RDP port to the extended ACL.
C. Replace certificate on the RDP server.
D. Adjust the MTU size within the routers.
Answer: C
NEW QUESTION: 4
You manage a cloud service that has a web application named WebRole1.
WebRole1 writes error messages to the Windows Event Log.
Users report receiving an error page with the following message: "Event 26 has occurred.
Contact your system administrator."
You need to access the WebRole1 event log.
Which three actions should you perform? Each correct answer presents part of the solution.
A. Update the cloud service definition file and the service configuration file.
B. Update the WebRole1 web.config file.
C. Create a storage account.
D. Run the Set-AzureVMDiagnosticsExtensionPowerShell cmdlet.
E. Enable verbose monitoring.
F. Run the Enable-AzureWebsiteApplicationDiagnostic PowerShell cmdlet.
Answer: A,C,E
Explanation:
step 1 specify the scheduled TransferLogLevelFilter to Verbose in the diagnostics.wadcfg step 2 Update the cloud service definition file and the service configuration file (.cspkg) step 3 best practice is to create a separate storage account for logging diagnostics data
References: http://azure.microsoft.com/en-us/documentation/articles/cloud-services-how-to-monitor/
Still searching for SPS 65503 .*
Answer: F
Explanation:
http://www.cisco.com/c/en/us/td/docs/ios/12_2/termserv/configuration/guide/ftersv_c/tcfaap re.html
NEW QUESTION: 3
An engineer has integrated a new DMVPN to link remote offices across the internet using Cisco IOS routers. When connecting to remote sites, pings and voice data appear to flow properly and all tunnel stats seem to show that are up. However, when trying to connect to a remote server using RDP, the connection fails. Which action resolves this issue?
A. Change DMVPN timeout values.
B. Add RDP port to the extended ACL.
C. Replace certificate on the RDP server.
D. Adjust the MTU size within the routers.
Answer: C
NEW QUESTION: 4
You manage a cloud service that has a web application named WebRole1.
WebRole1 writes error messages to the Windows Event Log.
Users report receiving an error page with the following message: "Event 26 has occurred.
Contact your system administrator."
You need to access the WebRole1 event log.
Which three actions should you perform? Each correct answer presents part of the solution.
A. Update the cloud service definition file and the service configuration file.
B. Update the WebRole1 web.config file.
C. Create a storage account.
D. Run the Set-AzureVMDiagnosticsExtensionPowerShell cmdlet.
E. Enable verbose monitoring.
F. Run the Enable-AzureWebsiteApplicationDiagnostic PowerShell cmdlet.
Answer: A,C,E
Explanation:
step 1 specify the scheduled TransferLogLevelFilter to Verbose in the diagnostics.wadcfg step 2 Update the cloud service definition file and the service configuration file (.cspkg) step 3 best practice is to create a separate storage account for logging diagnostics data
References: http://azure.microsoft.com/en-us/documentation/articles/cloud-services-how-to-monitor/
Answer: F
Explanation:
http://www.cisco.com/c/en/us/td/docs/ios/12_2/termserv/configuration/guide/ftersv_c/tcfaap re.html
NEW QUESTION: 3
An engineer has integrated a new DMVPN to link remote offices across the internet using Cisco IOS routers. When connecting to remote sites, pings and voice data appear to flow properly and all tunnel stats seem to show that are up. However, when trying to connect to a remote server using RDP, the connection fails. Which action resolves this issue?
A. Change DMVPN timeout values.
B. Add RDP port to the extended ACL.
C. Replace certificate on the RDP server.
D. Adjust the MTU size within the routers.
Answer: C
NEW QUESTION: 4
You manage a cloud service that has a web application named WebRole1.
WebRole1 writes error messages to the Windows Event Log.
Users report receiving an error page with the following message: "Event 26 has occurred.
Contact your system administrator."
You need to access the WebRole1 event log.
Which three actions should you perform? Each correct answer presents part of the solution.
A. Update the cloud service definition file and the service configuration file.
B. Update the WebRole1 web.config file.
C. Create a storage account.
D. Run the Set-AzureVMDiagnosticsExtensionPowerShell cmdlet.
E. Enable verbose monitoring.
F. Run the Enable-AzureWebsiteApplicationDiagnostic PowerShell cmdlet.
Answer: A,C,E
Explanation:
step 1 specify the scheduled TransferLogLevelFilter to Verbose in the diagnostics.wadcfg step 2 Update the cloud service definition file and the service configuration file (.cspkg) step 3 best practice is to create a separate storage account for logging diagnostics data
References: http://azure.microsoft.com/en-us/documentation/articles/cloud-services-how-to-monitor/
Answer: F
Explanation:
http://www.cisco.com/c/en/us/td/docs/ios/12_2/termserv/configuration/guide/ftersv_c/tcfaap re.html
NEW QUESTION: 3
An engineer has integrated a new DMVPN to link remote offices across the internet using Cisco IOS routers. When connecting to remote sites, pings and voice data appear to flow properly and all tunnel stats seem to show that are up. However, when trying to connect to a remote server using RDP, the connection fails. Which action resolves this issue?
A. Change DMVPN timeout values.
B. Add RDP port to the extended ACL.
C. Replace certificate on the RDP server.
D. Adjust the MTU size within the routers.
Answer: C
NEW QUESTION: 4
You manage a cloud service that has a web application named WebRole1.
WebRole1 writes error messages to the Windows Event Log.
Users report receiving an error page with the following message: "Event 26 has occurred.
Contact your system administrator."
You need to access the WebRole1 event log.
Which three actions should you perform? Each correct answer presents part of the solution.
A. Update the cloud service definition file and the service configuration file.
B. Update the WebRole1 web.config file.
C. Create a storage account.
D. Run the Set-AzureVMDiagnosticsExtensionPowerShell cmdlet.
E. Enable verbose monitoring.
F. Run the Enable-AzureWebsiteApplicationDiagnostic PowerShell cmdlet.
Answer: A,C,E
Explanation:
step 1 specify the scheduled TransferLogLevelFilter to Verbose in the diagnostics.wadcfg step 2 Update the cloud service definition file and the service configuration file (.cspkg) step 3 best practice is to create a separate storage account for logging diagnostics data
References: http://azure.microsoft.com/en-us/documentation/articles/cloud-services-how-to-monitor/
Answer: F
Explanation:
http://www.cisco.com/c/en/us/td/docs/ios/12_2/termserv/configuration/guide/ftersv_c/tcfaap re.html
NEW QUESTION: 3
An engineer has integrated a new DMVPN to link remote offices across the internet using Cisco IOS routers. When connecting to remote sites, pings and voice data appear to flow properly and all tunnel stats seem to show that are up. However, when trying to connect to a remote server using RDP, the connection fails. Which action resolves this issue?
A. Change DMVPN timeout values.
B. Add RDP port to the extended ACL.
C. Replace certificate on the RDP server.
D. Adjust the MTU size within the routers.
Answer: C
NEW QUESTION: 4
You manage a cloud service that has a web application named WebRole1.
WebRole1 writes error messages to the Windows Event Log.
Users report receiving an error page with the following message: "Event 26 has occurred.
Contact your system administrator."
You need to access the WebRole1 event log.
Which three actions should you perform? Each correct answer presents part of the solution.
A. Update the cloud service definition file and the service configuration file.
B. Update the WebRole1 web.config file.
C. Create a storage account.
D. Run the Set-AzureVMDiagnosticsExtensionPowerShell cmdlet.
E. Enable verbose monitoring.
F. Run the Enable-AzureWebsiteApplicationDiagnostic PowerShell cmdlet.
Answer: A,C,E
Explanation:
step 1 specify the scheduled TransferLogLevelFilter to Verbose in the diagnostics.wadcfg step 2 Update the cloud service definition file and the service configuration file (.cspkg) step 3 best practice is to create a separate storage account for logging diagnostics data
References: http://azure.microsoft.com/en-us/documentation/articles/cloud-services-how-to-monitor/
Answer: F
Explanation:
http://www.cisco.com/c/en/us/td/docs/ios/12_2/termserv/configuration/guide/ftersv_c/tcfaap re.html
NEW QUESTION: 3
An engineer has integrated a new DMVPN to link remote offices across the internet using Cisco IOS routers. When connecting to remote sites, pings and voice data appear to flow properly and all tunnel stats seem to show that are up. However, when trying to connect to a remote server using RDP, the connection fails. Which action resolves this issue?
A. Change DMVPN timeout values.
B. Add RDP port to the extended ACL.
C. Replace certificate on the RDP server.
D. Adjust the MTU size within the routers.
Answer: C
NEW QUESTION: 4
You manage a cloud service that has a web application named WebRole1.
WebRole1 writes error messages to the Windows Event Log.
Users report receiving an error page with the following message: "Event 26 has occurred.
Contact your system administrator."
You need to access the WebRole1 event log.
Which three actions should you perform? Each correct answer presents part of the solution.
A. Update the cloud service definition file and the service configuration file.
B. Update the WebRole1 web.config file.
C. Create a storage account.
D. Run the Set-AzureVMDiagnosticsExtensionPowerShell cmdlet.
E. Enable verbose monitoring.
F. Run the Enable-AzureWebsiteApplicationDiagnostic PowerShell cmdlet.
Answer: A,C,E
Explanation:
step 1 specify the scheduled TransferLogLevelFilter to Verbose in the diagnostics.wadcfg step 2 Update the cloud service definition file and the service configuration file (.cspkg) step 3 best practice is to create a separate storage account for logging diagnostics data
References: http://azure.microsoft.com/en-us/documentation/articles/cloud-services-how-to-monitor/
Answer: F
Explanation:
http://www.cisco.com/c/en/us/td/docs/ios/12_2/termserv/configuration/guide/ftersv_c/tcfaap re.html
NEW QUESTION: 3
An engineer has integrated a new DMVPN to link remote offices across the internet using Cisco IOS routers. When connecting to remote sites, pings and voice data appear to flow properly and all tunnel stats seem to show that are up. However, when trying to connect to a remote server using RDP, the connection fails. Which action resolves this issue?
A. Change DMVPN timeout values.
B. Add RDP port to the extended ACL.
C. Replace certificate on the RDP server.
D. Adjust the MTU size within the routers.
Answer: C
NEW QUESTION: 4
You manage a cloud service that has a web application named WebRole1.
WebRole1 writes error messages to the Windows Event Log.
Users report receiving an error page with the following message: "Event 26 has occurred.
Contact your system administrator."
You need to access the WebRole1 event log.
Which three actions should you perform? Each correct answer presents part of the solution.
A. Update the cloud service definition file and the service configuration file.
B. Update the WebRole1 web.config file.
C. Create a storage account.
D. Run the Set-AzureVMDiagnosticsExtensionPowerShell cmdlet.
E. Enable verbose monitoring.
F. Run the Enable-AzureWebsiteApplicationDiagnostic PowerShell cmdlet.
Answer: A,C,E
Explanation:
step 1 specify the scheduled TransferLogLevelFilter to Verbose in the diagnostics.wadcfg step 2 Update the cloud service definition file and the service configuration file (.cspkg) step 3 best practice is to create a separate storage account for logging diagnostics data
References: http://azure.microsoft.com/en-us/documentation/articles/cloud-services-how-to-monitor/
Answer: F
Explanation:
http://www.cisco.com/c/en/us/td/docs/ios/12_2/termserv/configuration/guide/ftersv_c/tcfaap re.html
NEW QUESTION: 3
An engineer has integrated a new DMVPN to link remote offices across the internet using Cisco IOS routers. When connecting to remote sites, pings and voice data appear to flow properly and all tunnel stats seem to show that are up. However, when trying to connect to a remote server using RDP, the connection fails. Which action resolves this issue?
A. Change DMVPN timeout values.
B. Add RDP port to the extended ACL.
C. Replace certificate on the RDP server.
D. Adjust the MTU size within the routers.
Answer: C
NEW QUESTION: 4
You manage a cloud service that has a web application named WebRole1.
WebRole1 writes error messages to the Windows Event Log.
Users report receiving an error page with the following message: "Event 26 has occurred.
Contact your system administrator."
You need to access the WebRole1 event log.
Which three actions should you perform? Each correct answer presents part of the solution.
A. Update the cloud service definition file and the service configuration file.
B. Update the WebRole1 web.config file.
C. Create a storage account.
D. Run the Set-AzureVMDiagnosticsExtensionPowerShell cmdlet.
E. Enable verbose monitoring.
F. Run the Enable-AzureWebsiteApplicationDiagnostic PowerShell cmdlet.
Answer: A,C,E
Explanation:
step 1 specify the scheduled TransferLogLevelFilter to Verbose in the diagnostics.wadcfg step 2 Update the cloud service definition file and the service configuration file (.cspkg) step 3 best practice is to create a separate storage account for logging diagnostics data
References: http://azure.microsoft.com/en-us/documentation/articles/cloud-services-how-to-monitor/
65503 .*
Answer: F
Explanation:
http://www.cisco.com/c/en/us/td/docs/ios/12_2/termserv/configuration/guide/ftersv_c/tcfaap re.html
NEW QUESTION: 3
An engineer has integrated a new DMVPN to link remote offices across the internet using Cisco IOS routers. When connecting to remote sites, pings and voice data appear to flow properly and all tunnel stats seem to show that are up. However, when trying to connect to a remote server using RDP, the connection fails. Which action resolves this issue?
A. Change DMVPN timeout values.
B. Add RDP port to the extended ACL.
C. Replace certificate on the RDP server.
D. Adjust the MTU size within the routers.
Answer: C
NEW QUESTION: 4
You manage a cloud service that has a web application named WebRole1.
WebRole1 writes error messages to the Windows Event Log.
Users report receiving an error page with the following message: "Event 26 has occurred.
Contact your system administrator."
You need to access the WebRole1 event log.
Which three actions should you perform? Each correct answer presents part of the solution.
A. Update the cloud service definition file and the service configuration file.
B. Update the WebRole1 web.config file.
C. Create a storage account.
D. Run the Set-AzureVMDiagnosticsExtensionPowerShell cmdlet.
E. Enable verbose monitoring.
F. Run the Enable-AzureWebsiteApplicationDiagnostic PowerShell cmdlet.
Answer: A,C,E
Explanation:
step 1 specify the scheduled TransferLogLevelFilter to Verbose in the diagnostics.wadcfg step 2 Update the cloud service definition file and the service configuration file (.cspkg) step 3 best practice is to create a separate storage account for logging diagnostics data
References: http://azure.microsoft.com/en-us/documentation/articles/cloud-services-how-to-monitor/
Keep walking if all you want is free SPS 65503 .*
Answer: F
Explanation:
http://www.cisco.com/c/en/us/td/docs/ios/12_2/termserv/configuration/guide/ftersv_c/tcfaap re.html
NEW QUESTION: 3
An engineer has integrated a new DMVPN to link remote offices across the internet using Cisco IOS routers. When connecting to remote sites, pings and voice data appear to flow properly and all tunnel stats seem to show that are up. However, when trying to connect to a remote server using RDP, the connection fails. Which action resolves this issue?
A. Change DMVPN timeout values.
B. Add RDP port to the extended ACL.
C. Replace certificate on the RDP server.
D. Adjust the MTU size within the routers.
Answer: C
NEW QUESTION: 4
You manage a cloud service that has a web application named WebRole1.
WebRole1 writes error messages to the Windows Event Log.
Users report receiving an error page with the following message: "Event 26 has occurred.
Contact your system administrator."
You need to access the WebRole1 event log.
Which three actions should you perform? Each correct answer presents part of the solution.
A. Update the cloud service definition file and the service configuration file.
B. Update the WebRole1 web.config file.
C. Create a storage account.
D. Run the Set-AzureVMDiagnosticsExtensionPowerShell cmdlet.
E. Enable verbose monitoring.
F. Run the Enable-AzureWebsiteApplicationDiagnostic PowerShell cmdlet.
Answer: A,C,E
Explanation:
step 1 specify the scheduled TransferLogLevelFilter to Verbose in the diagnostics.wadcfg step 2 Update the cloud service definition file and the service configuration file (.cspkg) step 3 best practice is to create a separate storage account for logging diagnostics data
References: http://azure.microsoft.com/en-us/documentation/articles/cloud-services-how-to-monitor/
Answer: F
Explanation:
http://www.cisco.com/c/en/us/td/docs/ios/12_2/termserv/configuration/guide/ftersv_c/tcfaap re.html
NEW QUESTION: 3
An engineer has integrated a new DMVPN to link remote offices across the internet using Cisco IOS routers. When connecting to remote sites, pings and voice data appear to flow properly and all tunnel stats seem to show that are up. However, when trying to connect to a remote server using RDP, the connection fails. Which action resolves this issue?
A. Change DMVPN timeout values.
B. Add RDP port to the extended ACL.
C. Replace certificate on the RDP server.
D. Adjust the MTU size within the routers.
Answer: C
NEW QUESTION: 4
You manage a cloud service that has a web application named WebRole1.
WebRole1 writes error messages to the Windows Event Log.
Users report receiving an error page with the following message: "Event 26 has occurred.
Contact your system administrator."
You need to access the WebRole1 event log.
Which three actions should you perform? Each correct answer presents part of the solution.
A. Update the cloud service definition file and the service configuration file.
B. Update the WebRole1 web.config file.
C. Create a storage account.
D. Run the Set-AzureVMDiagnosticsExtensionPowerShell cmdlet.
E. Enable verbose monitoring.
F. Run the Enable-AzureWebsiteApplicationDiagnostic PowerShell cmdlet.
Answer: A,C,E
Explanation:
step 1 specify the scheduled TransferLogLevelFilter to Verbose in the diagnostics.wadcfg step 2 Update the cloud service definition file and the service configuration file (.cspkg) step 3 best practice is to create a separate storage account for logging diagnostics data
References: http://azure.microsoft.com/en-us/documentation/articles/cloud-services-how-to-monitor/
- AgileBA-Foundation New Soft Simulations
- C-TBW50H-75 Interactive Practice Exam
- CIPT Test Questions
- Study Development-Lifecycle-and-Deployment-Architect Demo
- NSE7_ADA-6.3 Reliable Test Pattern
- Demo CIMAPRA19-F03-1 Test
- New L3M1 Exam Dumps
- C_CPI_15 Exam Test
- Data-Engineer-Associate-KR Reliable Test Sims
- Exam Dumps D-CS-DS-23 Collection
- 1z0-1119-1 Practice Engine
- Certification AWS-Certified-Cloud-Practitioner-KR Test Answers
- New Exam JN0-105 Braindumps
- Valid Test AWS-Solutions-Architect-Associate Bootcamp
- C-S4FTR-2023 Latest Test Questions
- C-TS422-2023 Valid Exam Voucher
- Exam Dumps Identity-and-Access-Management-Designer Pdf
- PL-900-KR Detail Explanation
- Exam D-ECS-DY-23 Quiz
- Latest Heroku-Architect Learning Material
- 300-610 Exam Engine
- Salesforce-Loyalty-Management Reliable Study Guide
- C_HRHPC_2311 Valid Test Discount
Answer: F
Explanation:
http://www.cisco.com/c/en/us/td/docs/ios/12_2/termserv/configuration/guide/ftersv_c/tcfaap re.html
NEW QUESTION: 3
An engineer has integrated a new DMVPN to link remote offices across the internet using Cisco IOS routers. When connecting to remote sites, pings and voice data appear to flow properly and all tunnel stats seem to show that are up. However, when trying to connect to a remote server using RDP, the connection fails. Which action resolves this issue?
A. Change DMVPN timeout values.
B. Add RDP port to the extended ACL.
C. Replace certificate on the RDP server.
D. Adjust the MTU size within the routers.
Answer: C
NEW QUESTION: 4
You manage a cloud service that has a web application named WebRole1.
WebRole1 writes error messages to the Windows Event Log.
Users report receiving an error page with the following message: "Event 26 has occurred.
Contact your system administrator."
You need to access the WebRole1 event log.
Which three actions should you perform? Each correct answer presents part of the solution.
A. Update the cloud service definition file and the service configuration file.
B. Update the WebRole1 web.config file.
C. Create a storage account.
D. Run the Set-AzureVMDiagnosticsExtensionPowerShell cmdlet.
E. Enable verbose monitoring.
F. Run the Enable-AzureWebsiteApplicationDiagnostic PowerShell cmdlet.
Answer: A,C,E
Explanation:
step 1 specify the scheduled TransferLogLevelFilter to Verbose in the diagnostics.wadcfg step 2 Update the cloud service definition file and the service configuration file (.cspkg) step 3 best practice is to create a separate storage account for logging diagnostics data
References: http://azure.microsoft.com/en-us/documentation/articles/cloud-services-how-to-monitor/
Answer: F
Explanation:
http://www.cisco.com/c/en/us/td/docs/ios/12_2/termserv/configuration/guide/ftersv_c/tcfaap re.html
NEW QUESTION: 3
An engineer has integrated a new DMVPN to link remote offices across the internet using Cisco IOS routers. When connecting to remote sites, pings and voice data appear to flow properly and all tunnel stats seem to show that are up. However, when trying to connect to a remote server using RDP, the connection fails. Which action resolves this issue?
A. Change DMVPN timeout values.
B. Add RDP port to the extended ACL.
C. Replace certificate on the RDP server.
D. Adjust the MTU size within the routers.
Answer: C
NEW QUESTION: 4
You manage a cloud service that has a web application named WebRole1.
WebRole1 writes error messages to the Windows Event Log.
Users report receiving an error page with the following message: "Event 26 has occurred.
Contact your system administrator."
You need to access the WebRole1 event log.
Which three actions should you perform? Each correct answer presents part of the solution.
A. Update the cloud service definition file and the service configuration file.
B. Update the WebRole1 web.config file.
C. Create a storage account.
D. Run the Set-AzureVMDiagnosticsExtensionPowerShell cmdlet.
E. Enable verbose monitoring.
F. Run the Enable-AzureWebsiteApplicationDiagnostic PowerShell cmdlet.
Answer: A,C,E
Explanation:
step 1 specify the scheduled TransferLogLevelFilter to Verbose in the diagnostics.wadcfg step 2 Update the cloud service definition file and the service configuration file (.cspkg) step 3 best practice is to create a separate storage account for logging diagnostics data
References: http://azure.microsoft.com/en-us/documentation/articles/cloud-services-how-to-monitor/
Answer: F
Explanation:
http://www.cisco.com/c/en/us/td/docs/ios/12_2/termserv/configuration/guide/ftersv_c/tcfaap re.html
NEW QUESTION: 3
An engineer has integrated a new DMVPN to link remote offices across the internet using Cisco IOS routers. When connecting to remote sites, pings and voice data appear to flow properly and all tunnel stats seem to show that are up. However, when trying to connect to a remote server using RDP, the connection fails. Which action resolves this issue?
A. Change DMVPN timeout values.
B. Add RDP port to the extended ACL.
C. Replace certificate on the RDP server.
D. Adjust the MTU size within the routers.
Answer: C
NEW QUESTION: 4
You manage a cloud service that has a web application named WebRole1.
WebRole1 writes error messages to the Windows Event Log.
Users report receiving an error page with the following message: "Event 26 has occurred.
Contact your system administrator."
You need to access the WebRole1 event log.
Which three actions should you perform? Each correct answer presents part of the solution.
A. Update the cloud service definition file and the service configuration file.
B. Update the WebRole1 web.config file.
C. Create a storage account.
D. Run the Set-AzureVMDiagnosticsExtensionPowerShell cmdlet.
E. Enable verbose monitoring.
F. Run the Enable-AzureWebsiteApplicationDiagnostic PowerShell cmdlet.
Answer: A,C,E
Explanation:
step 1 specify the scheduled TransferLogLevelFilter to Verbose in the diagnostics.wadcfg step 2 Update the cloud service definition file and the service configuration file (.cspkg) step 3 best practice is to create a separate storage account for logging diagnostics data
References: http://azure.microsoft.com/en-us/documentation/articles/cloud-services-how-to-monitor/
Answer: F
Explanation:
http://www.cisco.com/c/en/us/td/docs/ios/12_2/termserv/configuration/guide/ftersv_c/tcfaap re.html
NEW QUESTION: 3
An engineer has integrated a new DMVPN to link remote offices across the internet using Cisco IOS routers. When connecting to remote sites, pings and voice data appear to flow properly and all tunnel stats seem to show that are up. However, when trying to connect to a remote server using RDP, the connection fails. Which action resolves this issue?
A. Change DMVPN timeout values.
B. Add RDP port to the extended ACL.
C. Replace certificate on the RDP server.
D. Adjust the MTU size within the routers.
Answer: C
NEW QUESTION: 4
You manage a cloud service that has a web application named WebRole1.
WebRole1 writes error messages to the Windows Event Log.
Users report receiving an error page with the following message: "Event 26 has occurred.
Contact your system administrator."
You need to access the WebRole1 event log.
Which three actions should you perform? Each correct answer presents part of the solution.
A. Update the cloud service definition file and the service configuration file.
B. Update the WebRole1 web.config file.
C. Create a storage account.
D. Run the Set-AzureVMDiagnosticsExtensionPowerShell cmdlet.
E. Enable verbose monitoring.
F. Run the Enable-AzureWebsiteApplicationDiagnostic PowerShell cmdlet.
Answer: A,C,E
Explanation:
step 1 specify the scheduled TransferLogLevelFilter to Verbose in the diagnostics.wadcfg step 2 Update the cloud service definition file and the service configuration file (.cspkg) step 3 best practice is to create a separate storage account for logging diagnostics data
References: http://azure.microsoft.com/en-us/documentation/articles/cloud-services-how-to-monitor/
65503 .*
Answer: F
Explanation:
http://www.cisco.com/c/en/us/td/docs/ios/12_2/termserv/configuration/guide/ftersv_c/tcfaap re.html
NEW QUESTION: 3
An engineer has integrated a new DMVPN to link remote offices across the internet using Cisco IOS routers. When connecting to remote sites, pings and voice data appear to flow properly and all tunnel stats seem to show that are up. However, when trying to connect to a remote server using RDP, the connection fails. Which action resolves this issue?
A. Change DMVPN timeout values.
B. Add RDP port to the extended ACL.
C. Replace certificate on the RDP server.
D. Adjust the MTU size within the routers.
Answer: C
NEW QUESTION: 4
You manage a cloud service that has a web application named WebRole1.
WebRole1 writes error messages to the Windows Event Log.
Users report receiving an error page with the following message: "Event 26 has occurred.
Contact your system administrator."
You need to access the WebRole1 event log.
Which three actions should you perform? Each correct answer presents part of the solution.
A. Update the cloud service definition file and the service configuration file.
B. Update the WebRole1 web.config file.
C. Create a storage account.
D. Run the Set-AzureVMDiagnosticsExtensionPowerShell cmdlet.
E. Enable verbose monitoring.
F. Run the Enable-AzureWebsiteApplicationDiagnostic PowerShell cmdlet.
Answer: A,C,E
Explanation:
step 1 specify the scheduled TransferLogLevelFilter to Verbose in the diagnostics.wadcfg step 2 Update the cloud service definition file and the service configuration file (.cspkg) step 3 best practice is to create a separate storage account for logging diagnostics data
References: http://azure.microsoft.com/en-us/documentation/articles/cloud-services-how-to-monitor/
What you will not find at Ce-Isareti are latest SPS 65503 .*
Answer: F
Explanation:
http://www.cisco.com/c/en/us/td/docs/ios/12_2/termserv/configuration/guide/ftersv_c/tcfaap re.html
NEW QUESTION: 3
An engineer has integrated a new DMVPN to link remote offices across the internet using Cisco IOS routers. When connecting to remote sites, pings and voice data appear to flow properly and all tunnel stats seem to show that are up. However, when trying to connect to a remote server using RDP, the connection fails. Which action resolves this issue?
A. Change DMVPN timeout values.
B. Add RDP port to the extended ACL.
C. Replace certificate on the RDP server.
D. Adjust the MTU size within the routers.
Answer: C
NEW QUESTION: 4
You manage a cloud service that has a web application named WebRole1.
WebRole1 writes error messages to the Windows Event Log.
Users report receiving an error page with the following message: "Event 26 has occurred.
Contact your system administrator."
You need to access the WebRole1 event log.
Which three actions should you perform? Each correct answer presents part of the solution.
A. Update the cloud service definition file and the service configuration file.
B. Update the WebRole1 web.config file.
C. Create a storage account.
D. Run the Set-AzureVMDiagnosticsExtensionPowerShell cmdlet.
E. Enable verbose monitoring.
F. Run the Enable-AzureWebsiteApplicationDiagnostic PowerShell cmdlet.
Answer: A,C,E
Explanation:
step 1 specify the scheduled TransferLogLevelFilter to Verbose in the diagnostics.wadcfg step 2 Update the cloud service definition file and the service configuration file (.cspkg) step 3 best practice is to create a separate storage account for logging diagnostics data
References: http://azure.microsoft.com/en-us/documentation/articles/cloud-services-how-to-monitor/
Answer: F
Explanation:
http://www.cisco.com/c/en/us/td/docs/ios/12_2/termserv/configuration/guide/ftersv_c/tcfaap re.html
NEW QUESTION: 3
An engineer has integrated a new DMVPN to link remote offices across the internet using Cisco IOS routers. When connecting to remote sites, pings and voice data appear to flow properly and all tunnel stats seem to show that are up. However, when trying to connect to a remote server using RDP, the connection fails. Which action resolves this issue?
A. Change DMVPN timeout values.
B. Add RDP port to the extended ACL.
C. Replace certificate on the RDP server.
D. Adjust the MTU size within the routers.
Answer: C
NEW QUESTION: 4
You manage a cloud service that has a web application named WebRole1.
WebRole1 writes error messages to the Windows Event Log.
Users report receiving an error page with the following message: "Event 26 has occurred.
Contact your system administrator."
You need to access the WebRole1 event log.
Which three actions should you perform? Each correct answer presents part of the solution.
A. Update the cloud service definition file and the service configuration file.
B. Update the WebRole1 web.config file.
C. Create a storage account.
D. Run the Set-AzureVMDiagnosticsExtensionPowerShell cmdlet.
E. Enable verbose monitoring.
F. Run the Enable-AzureWebsiteApplicationDiagnostic PowerShell cmdlet.
Answer: A,C,E
Explanation:
step 1 specify the scheduled TransferLogLevelFilter to Verbose in the diagnostics.wadcfg step 2 Update the cloud service definition file and the service configuration file (.cspkg) step 3 best practice is to create a separate storage account for logging diagnostics data
References: http://azure.microsoft.com/en-us/documentation/articles/cloud-services-how-to-monitor/
Answer: F
Explanation:
http://www.cisco.com/c/en/us/td/docs/ios/12_2/termserv/configuration/guide/ftersv_c/tcfaap re.html
NEW QUESTION: 3
An engineer has integrated a new DMVPN to link remote offices across the internet using Cisco IOS routers. When connecting to remote sites, pings and voice data appear to flow properly and all tunnel stats seem to show that are up. However, when trying to connect to a remote server using RDP, the connection fails. Which action resolves this issue?
A. Change DMVPN timeout values.
B. Add RDP port to the extended ACL.
C. Replace certificate on the RDP server.
D. Adjust the MTU size within the routers.
Answer: C
NEW QUESTION: 4
You manage a cloud service that has a web application named WebRole1.
WebRole1 writes error messages to the Windows Event Log.
Users report receiving an error page with the following message: "Event 26 has occurred.
Contact your system administrator."
You need to access the WebRole1 event log.
Which three actions should you perform? Each correct answer presents part of the solution.
A. Update the cloud service definition file and the service configuration file.
B. Update the WebRole1 web.config file.
C. Create a storage account.
D. Run the Set-AzureVMDiagnosticsExtensionPowerShell cmdlet.
E. Enable verbose monitoring.
F. Run the Enable-AzureWebsiteApplicationDiagnostic PowerShell cmdlet.
Answer: A,C,E
Explanation:
step 1 specify the scheduled TransferLogLevelFilter to Verbose in the diagnostics.wadcfg step 2 Update the cloud service definition file and the service configuration file (.cspkg) step 3 best practice is to create a separate storage account for logging diagnostics data
References: http://azure.microsoft.com/en-us/documentation/articles/cloud-services-how-to-monitor/
- AgileBA-Foundation New Soft Simulations
- C-TBW50H-75 Interactive Practice Exam
- CIPT Test Questions
- Study Development-Lifecycle-and-Deployment-Architect Demo
- NSE7_ADA-6.3 Reliable Test Pattern
- Demo CIMAPRA19-F03-1 Test
- New L3M1 Exam Dumps
- C_CPI_15 Exam Test
- Data-Engineer-Associate-KR Reliable Test Sims
- Exam Dumps D-CS-DS-23 Collection
- 1z0-1119-1 Practice Engine
- Certification AWS-Certified-Cloud-Practitioner-KR Test Answers
- New Exam JN0-105 Braindumps
- Valid Test AWS-Solutions-Architect-Associate Bootcamp
- C-S4FTR-2023 Latest Test Questions
- C-TS422-2023 Valid Exam Voucher
- Exam Dumps Identity-and-Access-Management-Designer Pdf
- PL-900-KR Detail Explanation
- Exam D-ECS-DY-23 Quiz
- Latest Heroku-Architect Learning Material
- 300-610 Exam Engine
- Salesforce-Loyalty-Management Reliable Study Guide
- C_HRHPC_2311 Valid Test Discount
Answer: F
Explanation:
http://www.cisco.com/c/en/us/td/docs/ios/12_2/termserv/configuration/guide/ftersv_c/tcfaap re.html
NEW QUESTION: 3
An engineer has integrated a new DMVPN to link remote offices across the internet using Cisco IOS routers. When connecting to remote sites, pings and voice data appear to flow properly and all tunnel stats seem to show that are up. However, when trying to connect to a remote server using RDP, the connection fails. Which action resolves this issue?
A. Change DMVPN timeout values.
B. Add RDP port to the extended ACL.
C. Replace certificate on the RDP server.
D. Adjust the MTU size within the routers.
Answer: C
NEW QUESTION: 4
You manage a cloud service that has a web application named WebRole1.
WebRole1 writes error messages to the Windows Event Log.
Users report receiving an error page with the following message: "Event 26 has occurred.
Contact your system administrator."
You need to access the WebRole1 event log.
Which three actions should you perform? Each correct answer presents part of the solution.
A. Update the cloud service definition file and the service configuration file.
B. Update the WebRole1 web.config file.
C. Create a storage account.
D. Run the Set-AzureVMDiagnosticsExtensionPowerShell cmdlet.
E. Enable verbose monitoring.
F. Run the Enable-AzureWebsiteApplicationDiagnostic PowerShell cmdlet.
Answer: A,C,E
Explanation:
step 1 specify the scheduled TransferLogLevelFilter to Verbose in the diagnostics.wadcfg step 2 Update the cloud service definition file and the service configuration file (.cspkg) step 3 best practice is to create a separate storage account for logging diagnostics data
References: http://azure.microsoft.com/en-us/documentation/articles/cloud-services-how-to-monitor/
65503 .*
Answer: F
Explanation:
http://www.cisco.com/c/en/us/td/docs/ios/12_2/termserv/configuration/guide/ftersv_c/tcfaap re.html
NEW QUESTION: 3
An engineer has integrated a new DMVPN to link remote offices across the internet using Cisco IOS routers. When connecting to remote sites, pings and voice data appear to flow properly and all tunnel stats seem to show that are up. However, when trying to connect to a remote server using RDP, the connection fails. Which action resolves this issue?
A. Change DMVPN timeout values.
B. Add RDP port to the extended ACL.
C. Replace certificate on the RDP server.
D. Adjust the MTU size within the routers.
Answer: C
NEW QUESTION: 4
You manage a cloud service that has a web application named WebRole1.
WebRole1 writes error messages to the Windows Event Log.
Users report receiving an error page with the following message: "Event 26 has occurred.
Contact your system administrator."
You need to access the WebRole1 event log.
Which three actions should you perform? Each correct answer presents part of the solution.
A. Update the cloud service definition file and the service configuration file.
B. Update the WebRole1 web.config file.
C. Create a storage account.
D. Run the Set-AzureVMDiagnosticsExtensionPowerShell cmdlet.
E. Enable verbose monitoring.
F. Run the Enable-AzureWebsiteApplicationDiagnostic PowerShell cmdlet.
Answer: A,C,E
Explanation:
step 1 specify the scheduled TransferLogLevelFilter to Verbose in the diagnostics.wadcfg step 2 Update the cloud service definition file and the service configuration file (.cspkg) step 3 best practice is to create a separate storage account for logging diagnostics data
References: http://azure.microsoft.com/en-us/documentation/articles/cloud-services-how-to-monitor/
Proper training for SPS 65503 .*
Answer: F
Explanation:
http://www.cisco.com/c/en/us/td/docs/ios/12_2/termserv/configuration/guide/ftersv_c/tcfaap re.html
NEW QUESTION: 3
An engineer has integrated a new DMVPN to link remote offices across the internet using Cisco IOS routers. When connecting to remote sites, pings and voice data appear to flow properly and all tunnel stats seem to show that are up. However, when trying to connect to a remote server using RDP, the connection fails. Which action resolves this issue?
A. Change DMVPN timeout values.
B. Add RDP port to the extended ACL.
C. Replace certificate on the RDP server.
D. Adjust the MTU size within the routers.
Answer: C
NEW QUESTION: 4
You manage a cloud service that has a web application named WebRole1.
WebRole1 writes error messages to the Windows Event Log.
Users report receiving an error page with the following message: "Event 26 has occurred.
Contact your system administrator."
You need to access the WebRole1 event log.
Which three actions should you perform? Each correct answer presents part of the solution.
A. Update the cloud service definition file and the service configuration file.
B. Update the WebRole1 web.config file.
C. Create a storage account.
D. Run the Set-AzureVMDiagnosticsExtensionPowerShell cmdlet.
E. Enable verbose monitoring.
F. Run the Enable-AzureWebsiteApplicationDiagnostic PowerShell cmdlet.
Answer: A,C,E
Explanation:
step 1 specify the scheduled TransferLogLevelFilter to Verbose in the diagnostics.wadcfg step 2 Update the cloud service definition file and the service configuration file (.cspkg) step 3 best practice is to create a separate storage account for logging diagnostics data
References: http://azure.microsoft.com/en-us/documentation/articles/cloud-services-how-to-monitor/
Answer: F
Explanation:
http://www.cisco.com/c/en/us/td/docs/ios/12_2/termserv/configuration/guide/ftersv_c/tcfaap re.html
NEW QUESTION: 3
An engineer has integrated a new DMVPN to link remote offices across the internet using Cisco IOS routers. When connecting to remote sites, pings and voice data appear to flow properly and all tunnel stats seem to show that are up. However, when trying to connect to a remote server using RDP, the connection fails. Which action resolves this issue?
A. Change DMVPN timeout values.
B. Add RDP port to the extended ACL.
C. Replace certificate on the RDP server.
D. Adjust the MTU size within the routers.
Answer: C
NEW QUESTION: 4
You manage a cloud service that has a web application named WebRole1.
WebRole1 writes error messages to the Windows Event Log.
Users report receiving an error page with the following message: "Event 26 has occurred.
Contact your system administrator."
You need to access the WebRole1 event log.
Which three actions should you perform? Each correct answer presents part of the solution.
A. Update the cloud service definition file and the service configuration file.
B. Update the WebRole1 web.config file.
C. Create a storage account.
D. Run the Set-AzureVMDiagnosticsExtensionPowerShell cmdlet.
E. Enable verbose monitoring.
F. Run the Enable-AzureWebsiteApplicationDiagnostic PowerShell cmdlet.
Answer: A,C,E
Explanation:
step 1 specify the scheduled TransferLogLevelFilter to Verbose in the diagnostics.wadcfg step 2 Update the cloud service definition file and the service configuration file (.cspkg) step 3 best practice is to create a separate storage account for logging diagnostics data
References: http://azure.microsoft.com/en-us/documentation/articles/cloud-services-how-to-monitor/
Answer: F
Explanation:
http://www.cisco.com/c/en/us/td/docs/ios/12_2/termserv/configuration/guide/ftersv_c/tcfaap re.html
NEW QUESTION: 3
An engineer has integrated a new DMVPN to link remote offices across the internet using Cisco IOS routers. When connecting to remote sites, pings and voice data appear to flow properly and all tunnel stats seem to show that are up. However, when trying to connect to a remote server using RDP, the connection fails. Which action resolves this issue?
A. Change DMVPN timeout values.
B. Add RDP port to the extended ACL.
C. Replace certificate on the RDP server.
D. Adjust the MTU size within the routers.
Answer: C
NEW QUESTION: 4
You manage a cloud service that has a web application named WebRole1.
WebRole1 writes error messages to the Windows Event Log.
Users report receiving an error page with the following message: "Event 26 has occurred.
Contact your system administrator."
You need to access the WebRole1 event log.
Which three actions should you perform? Each correct answer presents part of the solution.
A. Update the cloud service definition file and the service configuration file.
B. Update the WebRole1 web.config file.
C. Create a storage account.
D. Run the Set-AzureVMDiagnosticsExtensionPowerShell cmdlet.
E. Enable verbose monitoring.
F. Run the Enable-AzureWebsiteApplicationDiagnostic PowerShell cmdlet.
Answer: A,C,E
Explanation:
step 1 specify the scheduled TransferLogLevelFilter to Verbose in the diagnostics.wadcfg step 2 Update the cloud service definition file and the service configuration file (.cspkg) step 3 best practice is to create a separate storage account for logging diagnostics data
References: http://azure.microsoft.com/en-us/documentation/articles/cloud-services-how-to-monitor/
Answer: F
Explanation:
http://www.cisco.com/c/en/us/td/docs/ios/12_2/termserv/configuration/guide/ftersv_c/tcfaap re.html
NEW QUESTION: 3
An engineer has integrated a new DMVPN to link remote offices across the internet using Cisco IOS routers. When connecting to remote sites, pings and voice data appear to flow properly and all tunnel stats seem to show that are up. However, when trying to connect to a remote server using RDP, the connection fails. Which action resolves this issue?
A. Change DMVPN timeout values.
B. Add RDP port to the extended ACL.
C. Replace certificate on the RDP server.
D. Adjust the MTU size within the routers.
Answer: C
NEW QUESTION: 4
You manage a cloud service that has a web application named WebRole1.
WebRole1 writes error messages to the Windows Event Log.
Users report receiving an error page with the following message: "Event 26 has occurred.
Contact your system administrator."
You need to access the WebRole1 event log.
Which three actions should you perform? Each correct answer presents part of the solution.
A. Update the cloud service definition file and the service configuration file.
B. Update the WebRole1 web.config file.
C. Create a storage account.
D. Run the Set-AzureVMDiagnosticsExtensionPowerShell cmdlet.
E. Enable verbose monitoring.
F. Run the Enable-AzureWebsiteApplicationDiagnostic PowerShell cmdlet.
Answer: A,C,E
Explanation:
step 1 specify the scheduled TransferLogLevelFilter to Verbose in the diagnostics.wadcfg step 2 Update the cloud service definition file and the service configuration file (.cspkg) step 3 best practice is to create a separate storage account for logging diagnostics data
References: http://azure.microsoft.com/en-us/documentation/articles/cloud-services-how-to-monitor/
Answer: F
Explanation:
http://www.cisco.com/c/en/us/td/docs/ios/12_2/termserv/configuration/guide/ftersv_c/tcfaap re.html
NEW QUESTION: 3
An engineer has integrated a new DMVPN to link remote offices across the internet using Cisco IOS routers. When connecting to remote sites, pings and voice data appear to flow properly and all tunnel stats seem to show that are up. However, when trying to connect to a remote server using RDP, the connection fails. Which action resolves this issue?
A. Change DMVPN timeout values.
B. Add RDP port to the extended ACL.
C. Replace certificate on the RDP server.
D. Adjust the MTU size within the routers.
Answer: C
NEW QUESTION: 4
You manage a cloud service that has a web application named WebRole1.
WebRole1 writes error messages to the Windows Event Log.
Users report receiving an error page with the following message: "Event 26 has occurred.
Contact your system administrator."
You need to access the WebRole1 event log.
Which three actions should you perform? Each correct answer presents part of the solution.
A. Update the cloud service definition file and the service configuration file.
B. Update the WebRole1 web.config file.
C. Create a storage account.
D. Run the Set-AzureVMDiagnosticsExtensionPowerShell cmdlet.
E. Enable verbose monitoring.
F. Run the Enable-AzureWebsiteApplicationDiagnostic PowerShell cmdlet.
Answer: A,C,E
Explanation:
step 1 specify the scheduled TransferLogLevelFilter to Verbose in the diagnostics.wadcfg step 2 Update the cloud service definition file and the service configuration file (.cspkg) step 3 best practice is to create a separate storage account for logging diagnostics data
References: http://azure.microsoft.com/en-us/documentation/articles/cloud-services-how-to-monitor/
Answer: F
Explanation:
http://www.cisco.com/c/en/us/td/docs/ios/12_2/termserv/configuration/guide/ftersv_c/tcfaap re.html
NEW QUESTION: 3
An engineer has integrated a new DMVPN to link remote offices across the internet using Cisco IOS routers. When connecting to remote sites, pings and voice data appear to flow properly and all tunnel stats seem to show that are up. However, when trying to connect to a remote server using RDP, the connection fails. Which action resolves this issue?
A. Change DMVPN timeout values.
B. Add RDP port to the extended ACL.
C. Replace certificate on the RDP server.
D. Adjust the MTU size within the routers.
Answer: C
NEW QUESTION: 4
You manage a cloud service that has a web application named WebRole1.
WebRole1 writes error messages to the Windows Event Log.
Users report receiving an error page with the following message: "Event 26 has occurred.
Contact your system administrator."
You need to access the WebRole1 event log.
Which three actions should you perform? Each correct answer presents part of the solution.
A. Update the cloud service definition file and the service configuration file.
B. Update the WebRole1 web.config file.
C. Create a storage account.
D. Run the Set-AzureVMDiagnosticsExtensionPowerShell cmdlet.
E. Enable verbose monitoring.
F. Run the Enable-AzureWebsiteApplicationDiagnostic PowerShell cmdlet.
Answer: A,C,E
Explanation:
step 1 specify the scheduled TransferLogLevelFilter to Verbose in the diagnostics.wadcfg step 2 Update the cloud service definition file and the service configuration file (.cspkg) step 3 best practice is to create a separate storage account for logging diagnostics data
References: http://azure.microsoft.com/en-us/documentation/articles/cloud-services-how-to-monitor/
Answer: F
Explanation:
http://www.cisco.com/c/en/us/td/docs/ios/12_2/termserv/configuration/guide/ftersv_c/tcfaap re.html
NEW QUESTION: 3
An engineer has integrated a new DMVPN to link remote offices across the internet using Cisco IOS routers. When connecting to remote sites, pings and voice data appear to flow properly and all tunnel stats seem to show that are up. However, when trying to connect to a remote server using RDP, the connection fails. Which action resolves this issue?
A. Change DMVPN timeout values.
B. Add RDP port to the extended ACL.
C. Replace certificate on the RDP server.
D. Adjust the MTU size within the routers.
Answer: C
NEW QUESTION: 4
You manage a cloud service that has a web application named WebRole1.
WebRole1 writes error messages to the Windows Event Log.
Users report receiving an error page with the following message: "Event 26 has occurred.
Contact your system administrator."
You need to access the WebRole1 event log.
Which three actions should you perform? Each correct answer presents part of the solution.
A. Update the cloud service definition file and the service configuration file.
B. Update the WebRole1 web.config file.
C. Create a storage account.
D. Run the Set-AzureVMDiagnosticsExtensionPowerShell cmdlet.
E. Enable verbose monitoring.
F. Run the Enable-AzureWebsiteApplicationDiagnostic PowerShell cmdlet.
Answer: A,C,E
Explanation:
step 1 specify the scheduled TransferLogLevelFilter to Verbose in the diagnostics.wadcfg step 2 Update the cloud service definition file and the service configuration file (.cspkg) step 3 best practice is to create a separate storage account for logging diagnostics data
References: http://azure.microsoft.com/en-us/documentation/articles/cloud-services-how-to-monitor/
Don't settle for sideline SPS 65503 .*
Answer: F
Explanation:
http://www.cisco.com/c/en/us/td/docs/ios/12_2/termserv/configuration/guide/ftersv_c/tcfaap re.html
NEW QUESTION: 3
An engineer has integrated a new DMVPN to link remote offices across the internet using Cisco IOS routers. When connecting to remote sites, pings and voice data appear to flow properly and all tunnel stats seem to show that are up. However, when trying to connect to a remote server using RDP, the connection fails. Which action resolves this issue?
A. Change DMVPN timeout values.
B. Add RDP port to the extended ACL.
C. Replace certificate on the RDP server.
D. Adjust the MTU size within the routers.
Answer: C
NEW QUESTION: 4
You manage a cloud service that has a web application named WebRole1.
WebRole1 writes error messages to the Windows Event Log.
Users report receiving an error page with the following message: "Event 26 has occurred.
Contact your system administrator."
You need to access the WebRole1 event log.
Which three actions should you perform? Each correct answer presents part of the solution.
A. Update the cloud service definition file and the service configuration file.
B. Update the WebRole1 web.config file.
C. Create a storage account.
D. Run the Set-AzureVMDiagnosticsExtensionPowerShell cmdlet.
E. Enable verbose monitoring.
F. Run the Enable-AzureWebsiteApplicationDiagnostic PowerShell cmdlet.
Answer: A,C,E
Explanation:
step 1 specify the scheduled TransferLogLevelFilter to Verbose in the diagnostics.wadcfg step 2 Update the cloud service definition file and the service configuration file (.cspkg) step 3 best practice is to create a separate storage account for logging diagnostics data
References: http://azure.microsoft.com/en-us/documentation/articles/cloud-services-how-to-monitor/
Answer: F
Explanation:
http://www.cisco.com/c/en/us/td/docs/ios/12_2/termserv/configuration/guide/ftersv_c/tcfaap re.html
NEW QUESTION: 3
An engineer has integrated a new DMVPN to link remote offices across the internet using Cisco IOS routers. When connecting to remote sites, pings and voice data appear to flow properly and all tunnel stats seem to show that are up. However, when trying to connect to a remote server using RDP, the connection fails. Which action resolves this issue?
A. Change DMVPN timeout values.
B. Add RDP port to the extended ACL.
C. Replace certificate on the RDP server.
D. Adjust the MTU size within the routers.
Answer: C
NEW QUESTION: 4
You manage a cloud service that has a web application named WebRole1.
WebRole1 writes error messages to the Windows Event Log.
Users report receiving an error page with the following message: "Event 26 has occurred.
Contact your system administrator."
You need to access the WebRole1 event log.
Which three actions should you perform? Each correct answer presents part of the solution.
A. Update the cloud service definition file and the service configuration file.
B. Update the WebRole1 web.config file.
C. Create a storage account.
D. Run the Set-AzureVMDiagnosticsExtensionPowerShell cmdlet.
E. Enable verbose monitoring.
F. Run the Enable-AzureWebsiteApplicationDiagnostic PowerShell cmdlet.
Answer: A,C,E
Explanation:
step 1 specify the scheduled TransferLogLevelFilter to Verbose in the diagnostics.wadcfg step 2 Update the cloud service definition file and the service configuration file (.cspkg) step 3 best practice is to create a separate storage account for logging diagnostics data
References: http://azure.microsoft.com/en-us/documentation/articles/cloud-services-how-to-monitor/
Answer: F
Explanation:
http://www.cisco.com/c/en/us/td/docs/ios/12_2/termserv/configuration/guide/ftersv_c/tcfaap re.html
NEW QUESTION: 3
An engineer has integrated a new DMVPN to link remote offices across the internet using Cisco IOS routers. When connecting to remote sites, pings and voice data appear to flow properly and all tunnel stats seem to show that are up. However, when trying to connect to a remote server using RDP, the connection fails. Which action resolves this issue?
A. Change DMVPN timeout values.
B. Add RDP port to the extended ACL.
C. Replace certificate on the RDP server.
D. Adjust the MTU size within the routers.
Answer: C
NEW QUESTION: 4
You manage a cloud service that has a web application named WebRole1.
WebRole1 writes error messages to the Windows Event Log.
Users report receiving an error page with the following message: "Event 26 has occurred.
Contact your system administrator."
You need to access the WebRole1 event log.
Which three actions should you perform? Each correct answer presents part of the solution.
A. Update the cloud service definition file and the service configuration file.
B. Update the WebRole1 web.config file.
C. Create a storage account.
D. Run the Set-AzureVMDiagnosticsExtensionPowerShell cmdlet.
E. Enable verbose monitoring.
F. Run the Enable-AzureWebsiteApplicationDiagnostic PowerShell cmdlet.
Answer: A,C,E
Explanation:
step 1 specify the scheduled TransferLogLevelFilter to Verbose in the diagnostics.wadcfg step 2 Update the cloud service definition file and the service configuration file (.cspkg) step 3 best practice is to create a separate storage account for logging diagnostics data
References: http://azure.microsoft.com/en-us/documentation/articles/cloud-services-how-to-monitor/
Answer: F
Explanation:
http://www.cisco.com/c/en/us/td/docs/ios/12_2/termserv/configuration/guide/ftersv_c/tcfaap re.html
NEW QUESTION: 3
An engineer has integrated a new DMVPN to link remote offices across the internet using Cisco IOS routers. When connecting to remote sites, pings and voice data appear to flow properly and all tunnel stats seem to show that are up. However, when trying to connect to a remote server using RDP, the connection fails. Which action resolves this issue?
A. Change DMVPN timeout values.
B. Add RDP port to the extended ACL.
C. Replace certificate on the RDP server.
D. Adjust the MTU size within the routers.
Answer: C
NEW QUESTION: 4
You manage a cloud service that has a web application named WebRole1.
WebRole1 writes error messages to the Windows Event Log.
Users report receiving an error page with the following message: "Event 26 has occurred.
Contact your system administrator."
You need to access the WebRole1 event log.
Which three actions should you perform? Each correct answer presents part of the solution.
A. Update the cloud service definition file and the service configuration file.
B. Update the WebRole1 web.config file.
C. Create a storage account.
D. Run the Set-AzureVMDiagnosticsExtensionPowerShell cmdlet.
E. Enable verbose monitoring.
F. Run the Enable-AzureWebsiteApplicationDiagnostic PowerShell cmdlet.
Answer: A,C,E
Explanation:
step 1 specify the scheduled TransferLogLevelFilter to Verbose in the diagnostics.wadcfg step 2 Update the cloud service definition file and the service configuration file (.cspkg) step 3 best practice is to create a separate storage account for logging diagnostics data
References: http://azure.microsoft.com/en-us/documentation/articles/cloud-services-how-to-monitor/
Answer: F
Explanation:
http://www.cisco.com/c/en/us/td/docs/ios/12_2/termserv/configuration/guide/ftersv_c/tcfaap re.html
NEW QUESTION: 3
An engineer has integrated a new DMVPN to link remote offices across the internet using Cisco IOS routers. When connecting to remote sites, pings and voice data appear to flow properly and all tunnel stats seem to show that are up. However, when trying to connect to a remote server using RDP, the connection fails. Which action resolves this issue?
A. Change DMVPN timeout values.
B. Add RDP port to the extended ACL.
C. Replace certificate on the RDP server.
D. Adjust the MTU size within the routers.
Answer: C
NEW QUESTION: 4
You manage a cloud service that has a web application named WebRole1.
WebRole1 writes error messages to the Windows Event Log.
Users report receiving an error page with the following message: "Event 26 has occurred.
Contact your system administrator."
You need to access the WebRole1 event log.
Which three actions should you perform? Each correct answer presents part of the solution.
A. Update the cloud service definition file and the service configuration file.
B. Update the WebRole1 web.config file.
C. Create a storage account.
D. Run the Set-AzureVMDiagnosticsExtensionPowerShell cmdlet.
E. Enable verbose monitoring.
F. Run the Enable-AzureWebsiteApplicationDiagnostic PowerShell cmdlet.
Answer: A,C,E
Explanation:
step 1 specify the scheduled TransferLogLevelFilter to Verbose in the diagnostics.wadcfg step 2 Update the cloud service definition file and the service configuration file (.cspkg) step 3 best practice is to create a separate storage account for logging diagnostics data
References: http://azure.microsoft.com/en-us/documentation/articles/cloud-services-how-to-monitor/