Passing the SAFe-RTE 65503$
E. _65503.?$
F. _65503_
Answer: A
Explanation:
http://www.cisco.com/c/en/us/td/docs/ios/12_2/termserv/configuration/guide/ftersv_c/tcfaap re.html
NEW QUESTION: 3
An engineer has integrated a new DMVPN to link remote offices across the internet using Cisco IOS routers. When connecting to remote sites, pings and voice data appear to flow properly and all tunnel stats seem to show that are up. However, when trying to connect to a remote server using RDP, the connection fails. Which action resolves this issue?
A. Add RDP port to the extended ACL.
B. Replace certificate on the RDP server.
C. Adjust the MTU size within the routers.
D. Change DMVPN timeout values.
Answer: B
NEW QUESTION: 4
You manage a cloud service that has a web application named WebRole1.
WebRole1 writes error messages to the Windows Event Log.
Users report receiving an error page with the following message: "Event 26 has occurred.
Contact your system administrator."
You need to access the WebRole1 event log.
Which three actions should you perform? Each correct answer presents part of the solution.
A. Run the Enable-AzureWebsiteApplicationDiagnostic PowerShell cmdlet.
B. Create a storage account.
C. Update the cloud service definition file and the service configuration file.
D. Enable verbose monitoring.
E. Update the WebRole1 web.config file.
F. Run the Set-AzureVMDiagnosticsExtensionPowerShell cmdlet.
Answer: B,C,D
Explanation:
step 1 specify the scheduled TransferLogLevelFilter to Verbose in the diagnostics.wadcfg step 2 Update the cloud service definition file and the service configuration file (.cspkg) step 3 best practice is to create a separate storage account for logging diagnostics data
References: http://azure.microsoft.com/en-us/documentation/articles/cloud-services-how-to-monitor/
E. _65503.?$
F. _65503_
Answer: A
Explanation:
http://www.cisco.com/c/en/us/td/docs/ios/12_2/termserv/configuration/guide/ftersv_c/tcfaap re.html
NEW QUESTION: 3
An engineer has integrated a new DMVPN to link remote offices across the internet using Cisco IOS routers. When connecting to remote sites, pings and voice data appear to flow properly and all tunnel stats seem to show that are up. However, when trying to connect to a remote server using RDP, the connection fails. Which action resolves this issue?
A. Add RDP port to the extended ACL.
B. Replace certificate on the RDP server.
C. Adjust the MTU size within the routers.
D. Change DMVPN timeout values.
Answer: B
NEW QUESTION: 4
You manage a cloud service that has a web application named WebRole1.
WebRole1 writes error messages to the Windows Event Log.
Users report receiving an error page with the following message: "Event 26 has occurred.
Contact your system administrator."
You need to access the WebRole1 event log.
Which three actions should you perform? Each correct answer presents part of the solution.
A. Run the Enable-AzureWebsiteApplicationDiagnostic PowerShell cmdlet.
B. Create a storage account.
C. Update the cloud service definition file and the service configuration file.
D. Enable verbose monitoring.
E. Update the WebRole1 web.config file.
F. Run the Set-AzureVMDiagnosticsExtensionPowerShell cmdlet.
Answer: B,C,D
Explanation:
step 1 specify the scheduled TransferLogLevelFilter to Verbose in the diagnostics.wadcfg step 2 Update the cloud service definition file and the service configuration file (.cspkg) step 3 best practice is to create a separate storage account for logging diagnostics data
References: http://azure.microsoft.com/en-us/documentation/articles/cloud-services-how-to-monitor/
E. _65503.?$
F. _65503_
Answer: A
Explanation:
http://www.cisco.com/c/en/us/td/docs/ios/12_2/termserv/configuration/guide/ftersv_c/tcfaap re.html
NEW QUESTION: 3
An engineer has integrated a new DMVPN to link remote offices across the internet using Cisco IOS routers. When connecting to remote sites, pings and voice data appear to flow properly and all tunnel stats seem to show that are up. However, when trying to connect to a remote server using RDP, the connection fails. Which action resolves this issue?
A. Add RDP port to the extended ACL.
B. Replace certificate on the RDP server.
C. Adjust the MTU size within the routers.
D. Change DMVPN timeout values.
Answer: B
NEW QUESTION: 4
You manage a cloud service that has a web application named WebRole1.
WebRole1 writes error messages to the Windows Event Log.
Users report receiving an error page with the following message: "Event 26 has occurred.
Contact your system administrator."
You need to access the WebRole1 event log.
Which three actions should you perform? Each correct answer presents part of the solution.
A. Run the Enable-AzureWebsiteApplicationDiagnostic PowerShell cmdlet.
B. Create a storage account.
C. Update the cloud service definition file and the service configuration file.
D. Enable verbose monitoring.
E. Update the WebRole1 web.config file.
F. Run the Set-AzureVMDiagnosticsExtensionPowerShell cmdlet.
Answer: B,C,D
Explanation:
step 1 specify the scheduled TransferLogLevelFilter to Verbose in the diagnostics.wadcfg step 2 Update the cloud service definition file and the service configuration file (.cspkg) step 3 best practice is to create a separate storage account for logging diagnostics data
References: http://azure.microsoft.com/en-us/documentation/articles/cloud-services-how-to-monitor/
This is more than a SAFe-RTE 65503$
E. _65503.?$
F. _65503_
Answer: A
Explanation:
http://www.cisco.com/c/en/us/td/docs/ios/12_2/termserv/configuration/guide/ftersv_c/tcfaap re.html
NEW QUESTION: 3
An engineer has integrated a new DMVPN to link remote offices across the internet using Cisco IOS routers. When connecting to remote sites, pings and voice data appear to flow properly and all tunnel stats seem to show that are up. However, when trying to connect to a remote server using RDP, the connection fails. Which action resolves this issue?
A. Add RDP port to the extended ACL.
B. Replace certificate on the RDP server.
C. Adjust the MTU size within the routers.
D. Change DMVPN timeout values.
Answer: B
NEW QUESTION: 4
You manage a cloud service that has a web application named WebRole1.
WebRole1 writes error messages to the Windows Event Log.
Users report receiving an error page with the following message: "Event 26 has occurred.
Contact your system administrator."
You need to access the WebRole1 event log.
Which three actions should you perform? Each correct answer presents part of the solution.
A. Run the Enable-AzureWebsiteApplicationDiagnostic PowerShell cmdlet.
B. Create a storage account.
C. Update the cloud service definition file and the service configuration file.
D. Enable verbose monitoring.
E. Update the WebRole1 web.config file.
F. Run the Set-AzureVMDiagnosticsExtensionPowerShell cmdlet.
Answer: B,C,D
Explanation:
step 1 specify the scheduled TransferLogLevelFilter to Verbose in the diagnostics.wadcfg step 2 Update the cloud service definition file and the service configuration file (.cspkg) step 3 best practice is to create a separate storage account for logging diagnostics data
References: http://azure.microsoft.com/en-us/documentation/articles/cloud-services-how-to-monitor/
- C-TS452-2022 Test Dump
- C-ACTIVATE22 New Soft Simulations
- PL-100 Interactive Practice Exam
- NS0-404 Test Questions
- Study C-CPE-16 Demo
- F3 Reliable Test Pattern
- Demo ECBA Test
- New SOA-C02-KR Exam Dumps
- SC-100 Exam Test
- CORe Reliable Test Sims
- Exam Dumps C-HR890-24 Collection
- D-AV-OE-23 Practice Engine
- Certification C_FIORD_2404 Test Answers
- New Exam L4M3 Braindumps
- Valid Test AZ-800 Bootcamp
- C-S4CFI-2302 Latest Test Questions
- DVA-C02 Valid Exam Voucher
- Exam Dumps C_THR12_2311 Pdf
- AgilePM-Practitioner Detail Explanation
- Exam FCSS_ADA_AR-6.7 Quiz
- Latest Marketing-Cloud-Developer Learning Material
- 1z1-808 Exam Engine
- JN0-664 Reliable Study Guide
- C-HANATEC-19 Valid Test Discount
E. _65503.?$
F. _65503_
Answer: A
Explanation:
http://www.cisco.com/c/en/us/td/docs/ios/12_2/termserv/configuration/guide/ftersv_c/tcfaap re.html
NEW QUESTION: 3
An engineer has integrated a new DMVPN to link remote offices across the internet using Cisco IOS routers. When connecting to remote sites, pings and voice data appear to flow properly and all tunnel stats seem to show that are up. However, when trying to connect to a remote server using RDP, the connection fails. Which action resolves this issue?
A. Add RDP port to the extended ACL.
B. Replace certificate on the RDP server.
C. Adjust the MTU size within the routers.
D. Change DMVPN timeout values.
Answer: B
NEW QUESTION: 4
You manage a cloud service that has a web application named WebRole1.
WebRole1 writes error messages to the Windows Event Log.
Users report receiving an error page with the following message: "Event 26 has occurred.
Contact your system administrator."
You need to access the WebRole1 event log.
Which three actions should you perform? Each correct answer presents part of the solution.
A. Run the Enable-AzureWebsiteApplicationDiagnostic PowerShell cmdlet.
B. Create a storage account.
C. Update the cloud service definition file and the service configuration file.
D. Enable verbose monitoring.
E. Update the WebRole1 web.config file.
F. Run the Set-AzureVMDiagnosticsExtensionPowerShell cmdlet.
Answer: B,C,D
Explanation:
step 1 specify the scheduled TransferLogLevelFilter to Verbose in the diagnostics.wadcfg step 2 Update the cloud service definition file and the service configuration file (.cspkg) step 3 best practice is to create a separate storage account for logging diagnostics data
References: http://azure.microsoft.com/en-us/documentation/articles/cloud-services-how-to-monitor/
E. _65503.?$
F. _65503_
Answer: A
Explanation:
http://www.cisco.com/c/en/us/td/docs/ios/12_2/termserv/configuration/guide/ftersv_c/tcfaap re.html
NEW QUESTION: 3
An engineer has integrated a new DMVPN to link remote offices across the internet using Cisco IOS routers. When connecting to remote sites, pings and voice data appear to flow properly and all tunnel stats seem to show that are up. However, when trying to connect to a remote server using RDP, the connection fails. Which action resolves this issue?
A. Add RDP port to the extended ACL.
B. Replace certificate on the RDP server.
C. Adjust the MTU size within the routers.
D. Change DMVPN timeout values.
Answer: B
NEW QUESTION: 4
You manage a cloud service that has a web application named WebRole1.
WebRole1 writes error messages to the Windows Event Log.
Users report receiving an error page with the following message: "Event 26 has occurred.
Contact your system administrator."
You need to access the WebRole1 event log.
Which three actions should you perform? Each correct answer presents part of the solution.
A. Run the Enable-AzureWebsiteApplicationDiagnostic PowerShell cmdlet.
B. Create a storage account.
C. Update the cloud service definition file and the service configuration file.
D. Enable verbose monitoring.
E. Update the WebRole1 web.config file.
F. Run the Set-AzureVMDiagnosticsExtensionPowerShell cmdlet.
Answer: B,C,D
Explanation:
step 1 specify the scheduled TransferLogLevelFilter to Verbose in the diagnostics.wadcfg step 2 Update the cloud service definition file and the service configuration file (.cspkg) step 3 best practice is to create a separate storage account for logging diagnostics data
References: http://azure.microsoft.com/en-us/documentation/articles/cloud-services-how-to-monitor/
Scaled Agile SAFe-RTE Most Reliable Questions It will only take you 1-2 days to finish the dumps VCE pdf and recite them before the exam, Our experts have distilled the crucial points of the exam into our SAFe-RTE training materials by integrating all useful content into them, Scaled Agile SAFe-RTE Most Reliable Questions Just try and you will love them, Scaled Agile SAFe-RTE Most Reliable Questions Well begun is half done.
Executives need to spend just a few days in the trenches with their technical SAFe-RTE Most Reliable Questions staff to get the true picture, Downloading and Installing Turbo Lister, When you're ready to get started, click one of those links.
Our SAFe-RTE certification training materials will be a good option for you, Touch to close the camera settings, The List Interface, In order to focus a depth map around https://pass4sure.itexamdownload.com/SAFe-RTE-valid-questions.html an appropriate area, you may choose to use spotlights instead of a directional light.
This may, in turn, increase the consumer appetite for complex products https://troytec.validtorrent.com/SAFe-RTE-valid-exam-torrent.html that have the above three elements, Then she cranked up the volume on the viewport and laughed as everyone's speakers screamed with feedback.
When teams are staffed with quality over quantity in mind, they JN0-480 Reliable Test Cost can be both skilled and lean, Open the manifest.xml file, As a result, the program will continue when a null is encountered.
High Hit-Rate Scaled Agile - SAFe-RTE - SAFe Release Train Engineer Most Reliable Questions
Grounded, ground loop, One or more of the frames may contain a tiny, tiny scroll Detailed OMG-OCUP2-ADV300 Study Plan bar at the top, It is difficult to get the attention of review sites because so many developers are requesting reviews, but you should still submit to them.
The Design Method will teach you a proven, repeatable process for Latest C_GRCAC_13 Braindumps Questions solving visual communication problems, It will only take you 1-2 days to finish the dumps VCE pdf and recite them before the exam.
Our experts have distilled the crucial points of the exam into our SAFe-RTE training materials by integrating all useful content into them, Just try and you will love them.
Well begun is half done, Besides, the SAFe-RTE free demo must be the best reference for your assessment, Just think that, you only need to spend some money, you can get a certificate as well as improve your ability.
It’s a critical question for you, Come and buy our SAFe-RTE exam materials, you will get more than you can imagine, The content of the SAFe-RTE training guide is the real questions and SAFe-RTE Most Reliable Questions answers which are always kept to be the latest according to the efforts of the professionals.
SAFe-RTE Most Reliable Questions | High Pass-Rate SAFe-RTE Latest Braindumps Questions: SAFe Release Train Engineer
However, with the help of the best training materials, you can completely pass Scaled Agile SAFe-RTE test in a short period of time, Especially those who study while working, you can save a lot of time easily.
Using Ce-Isareti can quickly help you get the 312-39 Valid Dumps Ebook certificate you want, Every subtle change in the mainstream of the knowledge about the SAFe-RTE certification will be caught and we try our best to search the SAFe-RTE study materials resources available to us.
Passing SAFe-RTE can be hard, and you won’t find such exam SAFe-RTE brain dumps anywhere, We are professional and authoritative exam dumps seller in this field.
Our website is a professional certification dumps provider that offer candidates Scaled Agile SAFe-RTE valid vce and SAFe-RTE exam pdf for achieving success in an effective way in the SAFe-RTE valid exam.
NEW QUESTION: 1
Which three are advantages of the Java exception mechanism?
A. Allows the creation of new exceptions that are tailored to the particular program being created
B. Provides a set of standard exceptions that covers all the possible errors
C. Improves the program structure because exceptions must be handled in the method in which they occurred
D. Improves the program structure because the error handling code is separated from the normal program function
E. Improves the program structure because the programmer can choose where to handle exceptions
Answer: A,D,E
Explanation:
B is false. Standard exceptions not cover all possible errors. D is false. Exceptions don't have to be handled in the method in which they occurred.
NEW QUESTION: 2
Which as-path access-list regular expression should be applied on R2 as a neighbor filter list to only allow updates with an origin of AS 65503?
Refer to the exhibit.
A.
What will you get with your purchase of the Unlimited Access Package for only $149.00?
- An overview of the SAFe-RTE 65503$
E. _65503.?$
F. _65503_
Answer: A
Explanation:
http://www.cisco.com/c/en/us/td/docs/ios/12_2/termserv/configuration/guide/ftersv_c/tcfaap re.htmlNEW QUESTION: 3
An engineer has integrated a new DMVPN to link remote offices across the internet using Cisco IOS routers. When connecting to remote sites, pings and voice data appear to flow properly and all tunnel stats seem to show that are up. However, when trying to connect to a remote server using RDP, the connection fails. Which action resolves this issue?
A. Add RDP port to the extended ACL.
B. Replace certificate on the RDP server.
C. Adjust the MTU size within the routers.
D. Change DMVPN timeout values.
Answer: BNEW QUESTION: 4
course through studying the questions and answers.
You manage a cloud service that has a web application named WebRole1.
WebRole1 writes error messages to the Windows Event Log.
Users report receiving an error page with the following message: "Event 26 has occurred.
Contact your system administrator."
You need to access the WebRole1 event log.
Which three actions should you perform? Each correct answer presents part of the solution.
A. Run the Enable-AzureWebsiteApplicationDiagnostic PowerShell cmdlet.
B. Create a storage account.
C. Update the cloud service definition file and the service configuration file.
D. Enable verbose monitoring.
E. Update the WebRole1 web.config file.
F. Run the Set-AzureVMDiagnosticsExtensionPowerShell cmdlet.
Answer: B,C,D
Explanation:
step 1 specify the scheduled TransferLogLevelFilter to Verbose in the diagnostics.wadcfg step 2 Update the cloud service definition file and the service configuration file (.cspkg) step 3 best practice is to create a separate storage account for logging diagnostics data
References: http://azure.microsoft.com/en-us/documentation/articles/cloud-services-how-to-monitor/ - A preview of actual SAFe-RTE 65503$
E. _65503.?$
F. _65503_
Answer: A
Explanation:
http://www.cisco.com/c/en/us/td/docs/ios/12_2/termserv/configuration/guide/ftersv_c/tcfaap re.htmlNEW QUESTION: 3
An engineer has integrated a new DMVPN to link remote offices across the internet using Cisco IOS routers. When connecting to remote sites, pings and voice data appear to flow properly and all tunnel stats seem to show that are up. However, when trying to connect to a remote server using RDP, the connection fails. Which action resolves this issue?
A. Add RDP port to the extended ACL.
B. Replace certificate on the RDP server.
C. Adjust the MTU size within the routers.
D. Change DMVPN timeout values.
Answer: BNEW QUESTION: 4
test questions
You manage a cloud service that has a web application named WebRole1.
WebRole1 writes error messages to the Windows Event Log.
Users report receiving an error page with the following message: "Event 26 has occurred.
Contact your system administrator."
You need to access the WebRole1 event log.
Which three actions should you perform? Each correct answer presents part of the solution.
A. Run the Enable-AzureWebsiteApplicationDiagnostic PowerShell cmdlet.
B. Create a storage account.
C. Update the cloud service definition file and the service configuration file.
D. Enable verbose monitoring.
E. Update the WebRole1 web.config file.
F. Run the Set-AzureVMDiagnosticsExtensionPowerShell cmdlet.
Answer: B,C,D
Explanation:
step 1 specify the scheduled TransferLogLevelFilter to Verbose in the diagnostics.wadcfg step 2 Update the cloud service definition file and the service configuration file (.cspkg) step 3 best practice is to create a separate storage account for logging diagnostics data
References: http://azure.microsoft.com/en-us/documentation/articles/cloud-services-how-to-monitor/ - Actual correct SAFe-RTE 65503$
E. _65503.?$
F. _65503_
Answer: A
Explanation:
http://www.cisco.com/c/en/us/td/docs/ios/12_2/termserv/configuration/guide/ftersv_c/tcfaap re.htmlNEW QUESTION: 3
An engineer has integrated a new DMVPN to link remote offices across the internet using Cisco IOS routers. When connecting to remote sites, pings and voice data appear to flow properly and all tunnel stats seem to show that are up. However, when trying to connect to a remote server using RDP, the connection fails. Which action resolves this issue?
A. Add RDP port to the extended ACL.
B. Replace certificate on the RDP server.
C. Adjust the MTU size within the routers.
D. Change DMVPN timeout values.
Answer: BNEW QUESTION: 4
answers to the latest 65503$
You manage a cloud service that has a web application named WebRole1.
WebRole1 writes error messages to the Windows Event Log.
Users report receiving an error page with the following message: "Event 26 has occurred.
Contact your system administrator."
You need to access the WebRole1 event log.
Which three actions should you perform? Each correct answer presents part of the solution.
A. Run the Enable-AzureWebsiteApplicationDiagnostic PowerShell cmdlet.
B. Create a storage account.
C. Update the cloud service definition file and the service configuration file.
D. Enable verbose monitoring.
E. Update the WebRole1 web.config file.
F. Run the Set-AzureVMDiagnosticsExtensionPowerShell cmdlet.
Answer: B,C,D
Explanation:
step 1 specify the scheduled TransferLogLevelFilter to Verbose in the diagnostics.wadcfg step 2 Update the cloud service definition file and the service configuration file (.cspkg) step 3 best practice is to create a separate storage account for logging diagnostics data
References: http://azure.microsoft.com/en-us/documentation/articles/cloud-services-how-to-monitor/
E. _65503.?$
F. _65503_
Answer: A
Explanation:
http://www.cisco.com/c/en/us/td/docs/ios/12_2/termserv/configuration/guide/ftersv_c/tcfaap re.htmlNEW QUESTION: 3
An engineer has integrated a new DMVPN to link remote offices across the internet using Cisco IOS routers. When connecting to remote sites, pings and voice data appear to flow properly and all tunnel stats seem to show that are up. However, when trying to connect to a remote server using RDP, the connection fails. Which action resolves this issue?
A. Add RDP port to the extended ACL.
B. Replace certificate on the RDP server.
C. Adjust the MTU size within the routers.
D. Change DMVPN timeout values.
Answer: BNEW QUESTION: 4
questions
You manage a cloud service that has a web application named WebRole1.
WebRole1 writes error messages to the Windows Event Log.
Users report receiving an error page with the following message: "Event 26 has occurred.
Contact your system administrator."
You need to access the WebRole1 event log.
Which three actions should you perform? Each correct answer presents part of the solution.
A. Run the Enable-AzureWebsiteApplicationDiagnostic PowerShell cmdlet.
B. Create a storage account.
C. Update the cloud service definition file and the service configuration file.
D. Enable verbose monitoring.
E. Update the WebRole1 web.config file.
F. Run the Set-AzureVMDiagnosticsExtensionPowerShell cmdlet.
Answer: B,C,D
Explanation:
step 1 specify the scheduled TransferLogLevelFilter to Verbose in the diagnostics.wadcfg step 2 Update the cloud service definition file and the service configuration file (.cspkg) step 3 best practice is to create a separate storage account for logging diagnostics data
References: http://azure.microsoft.com/en-us/documentation/articles/cloud-services-how-to-monitor/
Our Unlimited Access Package will prepare you for your exam with guaranteed results, surpassing other SAFe-RTE 65503$
E. _65503.?$
F. _65503_
Answer: A
Explanation:
http://www.cisco.com/c/en/us/td/docs/ios/12_2/termserv/configuration/guide/ftersv_c/tcfaap re.html
NEW QUESTION: 3
An engineer has integrated a new DMVPN to link remote offices across the internet using Cisco IOS routers. When connecting to remote sites, pings and voice data appear to flow properly and all tunnel stats seem to show that are up. However, when trying to connect to a remote server using RDP, the connection fails. Which action resolves this issue?
A. Add RDP port to the extended ACL.
B. Replace certificate on the RDP server.
C. Adjust the MTU size within the routers.
D. Change DMVPN timeout values.
Answer: B
NEW QUESTION: 4
You manage a cloud service that has a web application named WebRole1.
WebRole1 writes error messages to the Windows Event Log.
Users report receiving an error page with the following message: "Event 26 has occurred.
Contact your system administrator."
You need to access the WebRole1 event log.
Which three actions should you perform? Each correct answer presents part of the solution.
A. Run the Enable-AzureWebsiteApplicationDiagnostic PowerShell cmdlet.
B. Create a storage account.
C. Update the cloud service definition file and the service configuration file.
D. Enable verbose monitoring.
E. Update the WebRole1 web.config file.
F. Run the Set-AzureVMDiagnosticsExtensionPowerShell cmdlet.
Answer: B,C,D
Explanation:
step 1 specify the scheduled TransferLogLevelFilter to Verbose in the diagnostics.wadcfg step 2 Update the cloud service definition file and the service configuration file (.cspkg) step 3 best practice is to create a separate storage account for logging diagnostics data
References: http://azure.microsoft.com/en-us/documentation/articles/cloud-services-how-to-monitor/
E. _65503.?$
F. _65503_
Answer: A
Explanation:
http://www.cisco.com/c/en/us/td/docs/ios/12_2/termserv/configuration/guide/ftersv_c/tcfaap re.html
NEW QUESTION: 3
An engineer has integrated a new DMVPN to link remote offices across the internet using Cisco IOS routers. When connecting to remote sites, pings and voice data appear to flow properly and all tunnel stats seem to show that are up. However, when trying to connect to a remote server using RDP, the connection fails. Which action resolves this issue?
A. Add RDP port to the extended ACL.
B. Replace certificate on the RDP server.
C. Adjust the MTU size within the routers.
D. Change DMVPN timeout values.
Answer: B
NEW QUESTION: 4
You manage a cloud service that has a web application named WebRole1.
WebRole1 writes error messages to the Windows Event Log.
Users report receiving an error page with the following message: "Event 26 has occurred.
Contact your system administrator."
You need to access the WebRole1 event log.
Which three actions should you perform? Each correct answer presents part of the solution.
A. Run the Enable-AzureWebsiteApplicationDiagnostic PowerShell cmdlet.
B. Create a storage account.
C. Update the cloud service definition file and the service configuration file.
D. Enable verbose monitoring.
E. Update the WebRole1 web.config file.
F. Run the Set-AzureVMDiagnosticsExtensionPowerShell cmdlet.
Answer: B,C,D
Explanation:
step 1 specify the scheduled TransferLogLevelFilter to Verbose in the diagnostics.wadcfg step 2 Update the cloud service definition file and the service configuration file (.cspkg) step 3 best practice is to create a separate storage account for logging diagnostics data
References: http://azure.microsoft.com/en-us/documentation/articles/cloud-services-how-to-monitor/
E. _65503.?$
F. _65503_
Answer: A
Explanation:
http://www.cisco.com/c/en/us/td/docs/ios/12_2/termserv/configuration/guide/ftersv_c/tcfaap re.html
NEW QUESTION: 3
An engineer has integrated a new DMVPN to link remote offices across the internet using Cisco IOS routers. When connecting to remote sites, pings and voice data appear to flow properly and all tunnel stats seem to show that are up. However, when trying to connect to a remote server using RDP, the connection fails. Which action resolves this issue?
A. Add RDP port to the extended ACL.
B. Replace certificate on the RDP server.
C. Adjust the MTU size within the routers.
D. Change DMVPN timeout values.
Answer: B
NEW QUESTION: 4
You manage a cloud service that has a web application named WebRole1.
WebRole1 writes error messages to the Windows Event Log.
Users report receiving an error page with the following message: "Event 26 has occurred.
Contact your system administrator."
You need to access the WebRole1 event log.
Which three actions should you perform? Each correct answer presents part of the solution.
A. Run the Enable-AzureWebsiteApplicationDiagnostic PowerShell cmdlet.
B. Create a storage account.
C. Update the cloud service definition file and the service configuration file.
D. Enable verbose monitoring.
E. Update the WebRole1 web.config file.
F. Run the Set-AzureVMDiagnosticsExtensionPowerShell cmdlet.
Answer: B,C,D
Explanation:
step 1 specify the scheduled TransferLogLevelFilter to Verbose in the diagnostics.wadcfg step 2 Update the cloud service definition file and the service configuration file (.cspkg) step 3 best practice is to create a separate storage account for logging diagnostics data
References: http://azure.microsoft.com/en-us/documentation/articles/cloud-services-how-to-monitor/
E. _65503.?$
F. _65503_
Answer: A
Explanation:
http://www.cisco.com/c/en/us/td/docs/ios/12_2/termserv/configuration/guide/ftersv_c/tcfaap re.html
NEW QUESTION: 3
An engineer has integrated a new DMVPN to link remote offices across the internet using Cisco IOS routers. When connecting to remote sites, pings and voice data appear to flow properly and all tunnel stats seem to show that are up. However, when trying to connect to a remote server using RDP, the connection fails. Which action resolves this issue?
A. Add RDP port to the extended ACL.
B. Replace certificate on the RDP server.
C. Adjust the MTU size within the routers.
D. Change DMVPN timeout values.
Answer: B
NEW QUESTION: 4
You manage a cloud service that has a web application named WebRole1.
WebRole1 writes error messages to the Windows Event Log.
Users report receiving an error page with the following message: "Event 26 has occurred.
Contact your system administrator."
You need to access the WebRole1 event log.
Which three actions should you perform? Each correct answer presents part of the solution.
A. Run the Enable-AzureWebsiteApplicationDiagnostic PowerShell cmdlet.
B. Create a storage account.
C. Update the cloud service definition file and the service configuration file.
D. Enable verbose monitoring.
E. Update the WebRole1 web.config file.
F. Run the Set-AzureVMDiagnosticsExtensionPowerShell cmdlet.
Answer: B,C,D
Explanation:
step 1 specify the scheduled TransferLogLevelFilter to Verbose in the diagnostics.wadcfg step 2 Update the cloud service definition file and the service configuration file (.cspkg) step 3 best practice is to create a separate storage account for logging diagnostics data
References: http://azure.microsoft.com/en-us/documentation/articles/cloud-services-how-to-monitor/
E. _65503.?$
F. _65503_
Answer: A
Explanation:
http://www.cisco.com/c/en/us/td/docs/ios/12_2/termserv/configuration/guide/ftersv_c/tcfaap re.html
NEW QUESTION: 3
An engineer has integrated a new DMVPN to link remote offices across the internet using Cisco IOS routers. When connecting to remote sites, pings and voice data appear to flow properly and all tunnel stats seem to show that are up. However, when trying to connect to a remote server using RDP, the connection fails. Which action resolves this issue?
A. Add RDP port to the extended ACL.
B. Replace certificate on the RDP server.
C. Adjust the MTU size within the routers.
D. Change DMVPN timeout values.
Answer: B
NEW QUESTION: 4
You manage a cloud service that has a web application named WebRole1.
WebRole1 writes error messages to the Windows Event Log.
Users report receiving an error page with the following message: "Event 26 has occurred.
Contact your system administrator."
You need to access the WebRole1 event log.
Which three actions should you perform? Each correct answer presents part of the solution.
A. Run the Enable-AzureWebsiteApplicationDiagnostic PowerShell cmdlet.
B. Create a storage account.
C. Update the cloud service definition file and the service configuration file.
D. Enable verbose monitoring.
E. Update the WebRole1 web.config file.
F. Run the Set-AzureVMDiagnosticsExtensionPowerShell cmdlet.
Answer: B,C,D
Explanation:
step 1 specify the scheduled TransferLogLevelFilter to Verbose in the diagnostics.wadcfg step 2 Update the cloud service definition file and the service configuration file (.cspkg) step 3 best practice is to create a separate storage account for logging diagnostics data
References: http://azure.microsoft.com/en-us/documentation/articles/cloud-services-how-to-monitor/
E. _65503.?$
F. _65503_
Answer: A
Explanation:
http://www.cisco.com/c/en/us/td/docs/ios/12_2/termserv/configuration/guide/ftersv_c/tcfaap re.html
NEW QUESTION: 3
An engineer has integrated a new DMVPN to link remote offices across the internet using Cisco IOS routers. When connecting to remote sites, pings and voice data appear to flow properly and all tunnel stats seem to show that are up. However, when trying to connect to a remote server using RDP, the connection fails. Which action resolves this issue?
A. Add RDP port to the extended ACL.
B. Replace certificate on the RDP server.
C. Adjust the MTU size within the routers.
D. Change DMVPN timeout values.
Answer: B
NEW QUESTION: 4
You manage a cloud service that has a web application named WebRole1.
WebRole1 writes error messages to the Windows Event Log.
Users report receiving an error page with the following message: "Event 26 has occurred.
Contact your system administrator."
You need to access the WebRole1 event log.
Which three actions should you perform? Each correct answer presents part of the solution.
A. Run the Enable-AzureWebsiteApplicationDiagnostic PowerShell cmdlet.
B. Create a storage account.
C. Update the cloud service definition file and the service configuration file.
D. Enable verbose monitoring.
E. Update the WebRole1 web.config file.
F. Run the Set-AzureVMDiagnosticsExtensionPowerShell cmdlet.
Answer: B,C,D
Explanation:
step 1 specify the scheduled TransferLogLevelFilter to Verbose in the diagnostics.wadcfg step 2 Update the cloud service definition file and the service configuration file (.cspkg) step 3 best practice is to create a separate storage account for logging diagnostics data
References: http://azure.microsoft.com/en-us/documentation/articles/cloud-services-how-to-monitor/
Skip all the worthless SAFe-RTE 65503$
E. _65503.?$
F. _65503_
Answer: A
Explanation:
http://www.cisco.com/c/en/us/td/docs/ios/12_2/termserv/configuration/guide/ftersv_c/tcfaap re.html
NEW QUESTION: 3
An engineer has integrated a new DMVPN to link remote offices across the internet using Cisco IOS routers. When connecting to remote sites, pings and voice data appear to flow properly and all tunnel stats seem to show that are up. However, when trying to connect to a remote server using RDP, the connection fails. Which action resolves this issue?
A. Add RDP port to the extended ACL.
B. Replace certificate on the RDP server.
C. Adjust the MTU size within the routers.
D. Change DMVPN timeout values.
Answer: B
NEW QUESTION: 4
You manage a cloud service that has a web application named WebRole1.
WebRole1 writes error messages to the Windows Event Log.
Users report receiving an error page with the following message: "Event 26 has occurred.
Contact your system administrator."
You need to access the WebRole1 event log.
Which three actions should you perform? Each correct answer presents part of the solution.
A. Run the Enable-AzureWebsiteApplicationDiagnostic PowerShell cmdlet.
B. Create a storage account.
C. Update the cloud service definition file and the service configuration file.
D. Enable verbose monitoring.
E. Update the WebRole1 web.config file.
F. Run the Set-AzureVMDiagnosticsExtensionPowerShell cmdlet.
Answer: B,C,D
Explanation:
step 1 specify the scheduled TransferLogLevelFilter to Verbose in the diagnostics.wadcfg step 2 Update the cloud service definition file and the service configuration file (.cspkg) step 3 best practice is to create a separate storage account for logging diagnostics data
References: http://azure.microsoft.com/en-us/documentation/articles/cloud-services-how-to-monitor/
- C-TS452-2022 Test Dump
- C-ACTIVATE22 New Soft Simulations
- PL-100 Interactive Practice Exam
- NS0-404 Test Questions
- Study C-CPE-16 Demo
- F3 Reliable Test Pattern
- Demo ECBA Test
- New SOA-C02-KR Exam Dumps
- SC-100 Exam Test
- CORe Reliable Test Sims
- Exam Dumps C-HR890-24 Collection
- D-AV-OE-23 Practice Engine
- Certification C_FIORD_2404 Test Answers
- New Exam L4M3 Braindumps
- Valid Test AZ-800 Bootcamp
- C-S4CFI-2302 Latest Test Questions
- DVA-C02 Valid Exam Voucher
- Exam Dumps C_THR12_2311 Pdf
- AgilePM-Practitioner Detail Explanation
- Exam FCSS_ADA_AR-6.7 Quiz
- Latest Marketing-Cloud-Developer Learning Material
- 1z1-808 Exam Engine
- JN0-664 Reliable Study Guide
- C-HANATEC-19 Valid Test Discount
65503$
E. _65503.?$
F. _65503_
Answer: A
Explanation:
http://www.cisco.com/c/en/us/td/docs/ios/12_2/termserv/configuration/guide/ftersv_c/tcfaap re.html
NEW QUESTION: 3
An engineer has integrated a new DMVPN to link remote offices across the internet using Cisco IOS routers. When connecting to remote sites, pings and voice data appear to flow properly and all tunnel stats seem to show that are up. However, when trying to connect to a remote server using RDP, the connection fails. Which action resolves this issue?
A. Add RDP port to the extended ACL.
B. Replace certificate on the RDP server.
C. Adjust the MTU size within the routers.
D. Change DMVPN timeout values.
Answer: B
NEW QUESTION: 4
You manage a cloud service that has a web application named WebRole1.
WebRole1 writes error messages to the Windows Event Log.
Users report receiving an error page with the following message: "Event 26 has occurred.
Contact your system administrator."
You need to access the WebRole1 event log.
Which three actions should you perform? Each correct answer presents part of the solution.
A. Run the Enable-AzureWebsiteApplicationDiagnostic PowerShell cmdlet.
B. Create a storage account.
C. Update the cloud service definition file and the service configuration file.
D. Enable verbose monitoring.
E. Update the WebRole1 web.config file.
F. Run the Set-AzureVMDiagnosticsExtensionPowerShell cmdlet.
Answer: B,C,D
Explanation:
step 1 specify the scheduled TransferLogLevelFilter to Verbose in the diagnostics.wadcfg step 2 Update the cloud service definition file and the service configuration file (.cspkg) step 3 best practice is to create a separate storage account for logging diagnostics data
References: http://azure.microsoft.com/en-us/documentation/articles/cloud-services-how-to-monitor/
Difficulty finding the right SAFe-RTE 65503$
E. _65503.?$
F. _65503_
Answer: A
Explanation:
http://www.cisco.com/c/en/us/td/docs/ios/12_2/termserv/configuration/guide/ftersv_c/tcfaap re.html
NEW QUESTION: 3
An engineer has integrated a new DMVPN to link remote offices across the internet using Cisco IOS routers. When connecting to remote sites, pings and voice data appear to flow properly and all tunnel stats seem to show that are up. However, when trying to connect to a remote server using RDP, the connection fails. Which action resolves this issue?
A. Add RDP port to the extended ACL.
B. Replace certificate on the RDP server.
C. Adjust the MTU size within the routers.
D. Change DMVPN timeout values.
Answer: B
NEW QUESTION: 4
You manage a cloud service that has a web application named WebRole1.
WebRole1 writes error messages to the Windows Event Log.
Users report receiving an error page with the following message: "Event 26 has occurred.
Contact your system administrator."
You need to access the WebRole1 event log.
Which three actions should you perform? Each correct answer presents part of the solution.
A. Run the Enable-AzureWebsiteApplicationDiagnostic PowerShell cmdlet.
B. Create a storage account.
C. Update the cloud service definition file and the service configuration file.
D. Enable verbose monitoring.
E. Update the WebRole1 web.config file.
F. Run the Set-AzureVMDiagnosticsExtensionPowerShell cmdlet.
Answer: B,C,D
Explanation:
step 1 specify the scheduled TransferLogLevelFilter to Verbose in the diagnostics.wadcfg step 2 Update the cloud service definition file and the service configuration file (.cspkg) step 3 best practice is to create a separate storage account for logging diagnostics data
References: http://azure.microsoft.com/en-us/documentation/articles/cloud-services-how-to-monitor/
E. _65503.?$
F. _65503_
Answer: A
Explanation:
http://www.cisco.com/c/en/us/td/docs/ios/12_2/termserv/configuration/guide/ftersv_c/tcfaap re.html
NEW QUESTION: 3
An engineer has integrated a new DMVPN to link remote offices across the internet using Cisco IOS routers. When connecting to remote sites, pings and voice data appear to flow properly and all tunnel stats seem to show that are up. However, when trying to connect to a remote server using RDP, the connection fails. Which action resolves this issue?
A. Add RDP port to the extended ACL.
B. Replace certificate on the RDP server.
C. Adjust the MTU size within the routers.
D. Change DMVPN timeout values.
Answer: B
NEW QUESTION: 4
You manage a cloud service that has a web application named WebRole1.
WebRole1 writes error messages to the Windows Event Log.
Users report receiving an error page with the following message: "Event 26 has occurred.
Contact your system administrator."
You need to access the WebRole1 event log.
Which three actions should you perform? Each correct answer presents part of the solution.
A. Run the Enable-AzureWebsiteApplicationDiagnostic PowerShell cmdlet.
B. Create a storage account.
C. Update the cloud service definition file and the service configuration file.
D. Enable verbose monitoring.
E. Update the WebRole1 web.config file.
F. Run the Set-AzureVMDiagnosticsExtensionPowerShell cmdlet.
Answer: B,C,D
Explanation:
step 1 specify the scheduled TransferLogLevelFilter to Verbose in the diagnostics.wadcfg step 2 Update the cloud service definition file and the service configuration file (.cspkg) step 3 best practice is to create a separate storage account for logging diagnostics data
References: http://azure.microsoft.com/en-us/documentation/articles/cloud-services-how-to-monitor/
E. _65503.?$
F. _65503_
Answer: A
Explanation:
http://www.cisco.com/c/en/us/td/docs/ios/12_2/termserv/configuration/guide/ftersv_c/tcfaap re.html
NEW QUESTION: 3
An engineer has integrated a new DMVPN to link remote offices across the internet using Cisco IOS routers. When connecting to remote sites, pings and voice data appear to flow properly and all tunnel stats seem to show that are up. However, when trying to connect to a remote server using RDP, the connection fails. Which action resolves this issue?
A. Add RDP port to the extended ACL.
B. Replace certificate on the RDP server.
C. Adjust the MTU size within the routers.
D. Change DMVPN timeout values.
Answer: B
NEW QUESTION: 4
You manage a cloud service that has a web application named WebRole1.
WebRole1 writes error messages to the Windows Event Log.
Users report receiving an error page with the following message: "Event 26 has occurred.
Contact your system administrator."
You need to access the WebRole1 event log.
Which three actions should you perform? Each correct answer presents part of the solution.
A. Run the Enable-AzureWebsiteApplicationDiagnostic PowerShell cmdlet.
B. Create a storage account.
C. Update the cloud service definition file and the service configuration file.
D. Enable verbose monitoring.
E. Update the WebRole1 web.config file.
F. Run the Set-AzureVMDiagnosticsExtensionPowerShell cmdlet.
Answer: B,C,D
Explanation:
step 1 specify the scheduled TransferLogLevelFilter to Verbose in the diagnostics.wadcfg step 2 Update the cloud service definition file and the service configuration file (.cspkg) step 3 best practice is to create a separate storage account for logging diagnostics data
References: http://azure.microsoft.com/en-us/documentation/articles/cloud-services-how-to-monitor/
E. _65503.?$
F. _65503_
Answer: A
Explanation:
http://www.cisco.com/c/en/us/td/docs/ios/12_2/termserv/configuration/guide/ftersv_c/tcfaap re.html
NEW QUESTION: 3
An engineer has integrated a new DMVPN to link remote offices across the internet using Cisco IOS routers. When connecting to remote sites, pings and voice data appear to flow properly and all tunnel stats seem to show that are up. However, when trying to connect to a remote server using RDP, the connection fails. Which action resolves this issue?
A. Add RDP port to the extended ACL.
B. Replace certificate on the RDP server.
C. Adjust the MTU size within the routers.
D. Change DMVPN timeout values.
Answer: B
NEW QUESTION: 4
You manage a cloud service that has a web application named WebRole1.
WebRole1 writes error messages to the Windows Event Log.
Users report receiving an error page with the following message: "Event 26 has occurred.
Contact your system administrator."
You need to access the WebRole1 event log.
Which three actions should you perform? Each correct answer presents part of the solution.
A. Run the Enable-AzureWebsiteApplicationDiagnostic PowerShell cmdlet.
B. Create a storage account.
C. Update the cloud service definition file and the service configuration file.
D. Enable verbose monitoring.
E. Update the WebRole1 web.config file.
F. Run the Set-AzureVMDiagnosticsExtensionPowerShell cmdlet.
Answer: B,C,D
Explanation:
step 1 specify the scheduled TransferLogLevelFilter to Verbose in the diagnostics.wadcfg step 2 Update the cloud service definition file and the service configuration file (.cspkg) step 3 best practice is to create a separate storage account for logging diagnostics data
References: http://azure.microsoft.com/en-us/documentation/articles/cloud-services-how-to-monitor/
- C-TS452-2022 Test Dump
- C-ACTIVATE22 New Soft Simulations
- PL-100 Interactive Practice Exam
- NS0-404 Test Questions
- Study C-CPE-16 Demo
- F3 Reliable Test Pattern
- Demo ECBA Test
- New SOA-C02-KR Exam Dumps
- SC-100 Exam Test
- CORe Reliable Test Sims
- Exam Dumps C-HR890-24 Collection
- D-AV-OE-23 Practice Engine
- Certification C_FIORD_2404 Test Answers
- New Exam L4M3 Braindumps
- Valid Test AZ-800 Bootcamp
- C-S4CFI-2302 Latest Test Questions
- DVA-C02 Valid Exam Voucher
- Exam Dumps C_THR12_2311 Pdf
- AgilePM-Practitioner Detail Explanation
- Exam FCSS_ADA_AR-6.7 Quiz
- Latest Marketing-Cloud-Developer Learning Material
- 1z1-808 Exam Engine
- JN0-664 Reliable Study Guide
- C-HANATEC-19 Valid Test Discount
E. _65503.?$
F. _65503_
Answer: A
Explanation:
http://www.cisco.com/c/en/us/td/docs/ios/12_2/termserv/configuration/guide/ftersv_c/tcfaap re.html
NEW QUESTION: 3
An engineer has integrated a new DMVPN to link remote offices across the internet using Cisco IOS routers. When connecting to remote sites, pings and voice data appear to flow properly and all tunnel stats seem to show that are up. However, when trying to connect to a remote server using RDP, the connection fails. Which action resolves this issue?
A. Add RDP port to the extended ACL.
B. Replace certificate on the RDP server.
C. Adjust the MTU size within the routers.
D. Change DMVPN timeout values.
Answer: B
NEW QUESTION: 4
You manage a cloud service that has a web application named WebRole1.
WebRole1 writes error messages to the Windows Event Log.
Users report receiving an error page with the following message: "Event 26 has occurred.
Contact your system administrator."
You need to access the WebRole1 event log.
Which three actions should you perform? Each correct answer presents part of the solution.
A. Run the Enable-AzureWebsiteApplicationDiagnostic PowerShell cmdlet.
B. Create a storage account.
C. Update the cloud service definition file and the service configuration file.
D. Enable verbose monitoring.
E. Update the WebRole1 web.config file.
F. Run the Set-AzureVMDiagnosticsExtensionPowerShell cmdlet.
Answer: B,C,D
Explanation:
step 1 specify the scheduled TransferLogLevelFilter to Verbose in the diagnostics.wadcfg step 2 Update the cloud service definition file and the service configuration file (.cspkg) step 3 best practice is to create a separate storage account for logging diagnostics data
References: http://azure.microsoft.com/en-us/documentation/articles/cloud-services-how-to-monitor/
- C-TS452-2022 Test Dump
- C-ACTIVATE22 New Soft Simulations
- PL-100 Interactive Practice Exam
- NS0-404 Test Questions
- Study C-CPE-16 Demo
- F3 Reliable Test Pattern
- Demo ECBA Test
- New SOA-C02-KR Exam Dumps
- SC-100 Exam Test
- CORe Reliable Test Sims
- Exam Dumps C-HR890-24 Collection
- D-AV-OE-23 Practice Engine
- Certification C_FIORD_2404 Test Answers
- New Exam L4M3 Braindumps
- Valid Test AZ-800 Bootcamp
- C-S4CFI-2302 Latest Test Questions
- DVA-C02 Valid Exam Voucher
- Exam Dumps C_THR12_2311 Pdf
- AgilePM-Practitioner Detail Explanation
- Exam FCSS_ADA_AR-6.7 Quiz
- Latest Marketing-Cloud-Developer Learning Material
- 1z1-808 Exam Engine
- JN0-664 Reliable Study Guide
- C-HANATEC-19 Valid Test Discount
E. _65503.?$
F. _65503_
Answer: A
Explanation:
http://www.cisco.com/c/en/us/td/docs/ios/12_2/termserv/configuration/guide/ftersv_c/tcfaap re.html
NEW QUESTION: 3
An engineer has integrated a new DMVPN to link remote offices across the internet using Cisco IOS routers. When connecting to remote sites, pings and voice data appear to flow properly and all tunnel stats seem to show that are up. However, when trying to connect to a remote server using RDP, the connection fails. Which action resolves this issue?
A. Add RDP port to the extended ACL.
B. Replace certificate on the RDP server.
C. Adjust the MTU size within the routers.
D. Change DMVPN timeout values.
Answer: B
NEW QUESTION: 4
You manage a cloud service that has a web application named WebRole1.
WebRole1 writes error messages to the Windows Event Log.
Users report receiving an error page with the following message: "Event 26 has occurred.
Contact your system administrator."
You need to access the WebRole1 event log.
Which three actions should you perform? Each correct answer presents part of the solution.
A. Run the Enable-AzureWebsiteApplicationDiagnostic PowerShell cmdlet.
B. Create a storage account.
C. Update the cloud service definition file and the service configuration file.
D. Enable verbose monitoring.
E. Update the WebRole1 web.config file.
F. Run the Set-AzureVMDiagnosticsExtensionPowerShell cmdlet.
Answer: B,C,D
Explanation:
step 1 specify the scheduled TransferLogLevelFilter to Verbose in the diagnostics.wadcfg step 2 Update the cloud service definition file and the service configuration file (.cspkg) step 3 best practice is to create a separate storage account for logging diagnostics data
References: http://azure.microsoft.com/en-us/documentation/articles/cloud-services-how-to-monitor/
E. _65503.?$
F. _65503_
Answer: A
Explanation:
http://www.cisco.com/c/en/us/td/docs/ios/12_2/termserv/configuration/guide/ftersv_c/tcfaap re.html
NEW QUESTION: 3
An engineer has integrated a new DMVPN to link remote offices across the internet using Cisco IOS routers. When connecting to remote sites, pings and voice data appear to flow properly and all tunnel stats seem to show that are up. However, when trying to connect to a remote server using RDP, the connection fails. Which action resolves this issue?
A. Add RDP port to the extended ACL.
B. Replace certificate on the RDP server.
C. Adjust the MTU size within the routers.
D. Change DMVPN timeout values.
Answer: B
NEW QUESTION: 4
You manage a cloud service that has a web application named WebRole1.
WebRole1 writes error messages to the Windows Event Log.
Users report receiving an error page with the following message: "Event 26 has occurred.
Contact your system administrator."
You need to access the WebRole1 event log.
Which three actions should you perform? Each correct answer presents part of the solution.
A. Run the Enable-AzureWebsiteApplicationDiagnostic PowerShell cmdlet.
B. Create a storage account.
C. Update the cloud service definition file and the service configuration file.
D. Enable verbose monitoring.
E. Update the WebRole1 web.config file.
F. Run the Set-AzureVMDiagnosticsExtensionPowerShell cmdlet.
Answer: B,C,D
Explanation:
step 1 specify the scheduled TransferLogLevelFilter to Verbose in the diagnostics.wadcfg step 2 Update the cloud service definition file and the service configuration file (.cspkg) step 3 best practice is to create a separate storage account for logging diagnostics data
References: http://azure.microsoft.com/en-us/documentation/articles/cloud-services-how-to-monitor/
E. _65503.?$
F. _65503_
Answer: A
Explanation:
http://www.cisco.com/c/en/us/td/docs/ios/12_2/termserv/configuration/guide/ftersv_c/tcfaap re.html
NEW QUESTION: 3
An engineer has integrated a new DMVPN to link remote offices across the internet using Cisco IOS routers. When connecting to remote sites, pings and voice data appear to flow properly and all tunnel stats seem to show that are up. However, when trying to connect to a remote server using RDP, the connection fails. Which action resolves this issue?
A. Add RDP port to the extended ACL.
B. Replace certificate on the RDP server.
C. Adjust the MTU size within the routers.
D. Change DMVPN timeout values.
Answer: B
NEW QUESTION: 4
You manage a cloud service that has a web application named WebRole1.
WebRole1 writes error messages to the Windows Event Log.
Users report receiving an error page with the following message: "Event 26 has occurred.
Contact your system administrator."
You need to access the WebRole1 event log.
Which three actions should you perform? Each correct answer presents part of the solution.
A. Run the Enable-AzureWebsiteApplicationDiagnostic PowerShell cmdlet.
B. Create a storage account.
C. Update the cloud service definition file and the service configuration file.
D. Enable verbose monitoring.
E. Update the WebRole1 web.config file.
F. Run the Set-AzureVMDiagnosticsExtensionPowerShell cmdlet.
Answer: B,C,D
Explanation:
step 1 specify the scheduled TransferLogLevelFilter to Verbose in the diagnostics.wadcfg step 2 Update the cloud service definition file and the service configuration file (.cspkg) step 3 best practice is to create a separate storage account for logging diagnostics data
References: http://azure.microsoft.com/en-us/documentation/articles/cloud-services-how-to-monitor/
65503$
E. _65503.?$
F. _65503_
Answer: A
Explanation:
http://www.cisco.com/c/en/us/td/docs/ios/12_2/termserv/configuration/guide/ftersv_c/tcfaap re.html
NEW QUESTION: 3
An engineer has integrated a new DMVPN to link remote offices across the internet using Cisco IOS routers. When connecting to remote sites, pings and voice data appear to flow properly and all tunnel stats seem to show that are up. However, when trying to connect to a remote server using RDP, the connection fails. Which action resolves this issue?
A. Add RDP port to the extended ACL.
B. Replace certificate on the RDP server.
C. Adjust the MTU size within the routers.
D. Change DMVPN timeout values.
Answer: B
NEW QUESTION: 4
You manage a cloud service that has a web application named WebRole1.
WebRole1 writes error messages to the Windows Event Log.
Users report receiving an error page with the following message: "Event 26 has occurred.
Contact your system administrator."
You need to access the WebRole1 event log.
Which three actions should you perform? Each correct answer presents part of the solution.
A. Run the Enable-AzureWebsiteApplicationDiagnostic PowerShell cmdlet.
B. Create a storage account.
C. Update the cloud service definition file and the service configuration file.
D. Enable verbose monitoring.
E. Update the WebRole1 web.config file.
F. Run the Set-AzureVMDiagnosticsExtensionPowerShell cmdlet.
Answer: B,C,D
Explanation:
step 1 specify the scheduled TransferLogLevelFilter to Verbose in the diagnostics.wadcfg step 2 Update the cloud service definition file and the service configuration file (.cspkg) step 3 best practice is to create a separate storage account for logging diagnostics data
References: http://azure.microsoft.com/en-us/documentation/articles/cloud-services-how-to-monitor/
Still searching for SAFe-RTE 65503$
E. _65503.?$
F. _65503_
Answer: A
Explanation:
http://www.cisco.com/c/en/us/td/docs/ios/12_2/termserv/configuration/guide/ftersv_c/tcfaap re.html
NEW QUESTION: 3
An engineer has integrated a new DMVPN to link remote offices across the internet using Cisco IOS routers. When connecting to remote sites, pings and voice data appear to flow properly and all tunnel stats seem to show that are up. However, when trying to connect to a remote server using RDP, the connection fails. Which action resolves this issue?
A. Add RDP port to the extended ACL.
B. Replace certificate on the RDP server.
C. Adjust the MTU size within the routers.
D. Change DMVPN timeout values.
Answer: B
NEW QUESTION: 4
You manage a cloud service that has a web application named WebRole1.
WebRole1 writes error messages to the Windows Event Log.
Users report receiving an error page with the following message: "Event 26 has occurred.
Contact your system administrator."
You need to access the WebRole1 event log.
Which three actions should you perform? Each correct answer presents part of the solution.
A. Run the Enable-AzureWebsiteApplicationDiagnostic PowerShell cmdlet.
B. Create a storage account.
C. Update the cloud service definition file and the service configuration file.
D. Enable verbose monitoring.
E. Update the WebRole1 web.config file.
F. Run the Set-AzureVMDiagnosticsExtensionPowerShell cmdlet.
Answer: B,C,D
Explanation:
step 1 specify the scheduled TransferLogLevelFilter to Verbose in the diagnostics.wadcfg step 2 Update the cloud service definition file and the service configuration file (.cspkg) step 3 best practice is to create a separate storage account for logging diagnostics data
References: http://azure.microsoft.com/en-us/documentation/articles/cloud-services-how-to-monitor/
E. _65503.?$
F. _65503_
Answer: A
Explanation:
http://www.cisco.com/c/en/us/td/docs/ios/12_2/termserv/configuration/guide/ftersv_c/tcfaap re.html
NEW QUESTION: 3
An engineer has integrated a new DMVPN to link remote offices across the internet using Cisco IOS routers. When connecting to remote sites, pings and voice data appear to flow properly and all tunnel stats seem to show that are up. However, when trying to connect to a remote server using RDP, the connection fails. Which action resolves this issue?
A. Add RDP port to the extended ACL.
B. Replace certificate on the RDP server.
C. Adjust the MTU size within the routers.
D. Change DMVPN timeout values.
Answer: B
NEW QUESTION: 4
You manage a cloud service that has a web application named WebRole1.
WebRole1 writes error messages to the Windows Event Log.
Users report receiving an error page with the following message: "Event 26 has occurred.
Contact your system administrator."
You need to access the WebRole1 event log.
Which three actions should you perform? Each correct answer presents part of the solution.
A. Run the Enable-AzureWebsiteApplicationDiagnostic PowerShell cmdlet.
B. Create a storage account.
C. Update the cloud service definition file and the service configuration file.
D. Enable verbose monitoring.
E. Update the WebRole1 web.config file.
F. Run the Set-AzureVMDiagnosticsExtensionPowerShell cmdlet.
Answer: B,C,D
Explanation:
step 1 specify the scheduled TransferLogLevelFilter to Verbose in the diagnostics.wadcfg step 2 Update the cloud service definition file and the service configuration file (.cspkg) step 3 best practice is to create a separate storage account for logging diagnostics data
References: http://azure.microsoft.com/en-us/documentation/articles/cloud-services-how-to-monitor/
E. _65503.?$
F. _65503_
Answer: A
Explanation:
http://www.cisco.com/c/en/us/td/docs/ios/12_2/termserv/configuration/guide/ftersv_c/tcfaap re.html
NEW QUESTION: 3
An engineer has integrated a new DMVPN to link remote offices across the internet using Cisco IOS routers. When connecting to remote sites, pings and voice data appear to flow properly and all tunnel stats seem to show that are up. However, when trying to connect to a remote server using RDP, the connection fails. Which action resolves this issue?
A. Add RDP port to the extended ACL.
B. Replace certificate on the RDP server.
C. Adjust the MTU size within the routers.
D. Change DMVPN timeout values.
Answer: B
NEW QUESTION: 4
You manage a cloud service that has a web application named WebRole1.
WebRole1 writes error messages to the Windows Event Log.
Users report receiving an error page with the following message: "Event 26 has occurred.
Contact your system administrator."
You need to access the WebRole1 event log.
Which three actions should you perform? Each correct answer presents part of the solution.
A. Run the Enable-AzureWebsiteApplicationDiagnostic PowerShell cmdlet.
B. Create a storage account.
C. Update the cloud service definition file and the service configuration file.
D. Enable verbose monitoring.
E. Update the WebRole1 web.config file.
F. Run the Set-AzureVMDiagnosticsExtensionPowerShell cmdlet.
Answer: B,C,D
Explanation:
step 1 specify the scheduled TransferLogLevelFilter to Verbose in the diagnostics.wadcfg step 2 Update the cloud service definition file and the service configuration file (.cspkg) step 3 best practice is to create a separate storage account for logging diagnostics data
References: http://azure.microsoft.com/en-us/documentation/articles/cloud-services-how-to-monitor/
E. _65503.?$
F. _65503_
Answer: A
Explanation:
http://www.cisco.com/c/en/us/td/docs/ios/12_2/termserv/configuration/guide/ftersv_c/tcfaap re.html
NEW QUESTION: 3
An engineer has integrated a new DMVPN to link remote offices across the internet using Cisco IOS routers. When connecting to remote sites, pings and voice data appear to flow properly and all tunnel stats seem to show that are up. However, when trying to connect to a remote server using RDP, the connection fails. Which action resolves this issue?
A. Add RDP port to the extended ACL.
B. Replace certificate on the RDP server.
C. Adjust the MTU size within the routers.
D. Change DMVPN timeout values.
Answer: B
NEW QUESTION: 4
You manage a cloud service that has a web application named WebRole1.
WebRole1 writes error messages to the Windows Event Log.
Users report receiving an error page with the following message: "Event 26 has occurred.
Contact your system administrator."
You need to access the WebRole1 event log.
Which three actions should you perform? Each correct answer presents part of the solution.
A. Run the Enable-AzureWebsiteApplicationDiagnostic PowerShell cmdlet.
B. Create a storage account.
C. Update the cloud service definition file and the service configuration file.
D. Enable verbose monitoring.
E. Update the WebRole1 web.config file.
F. Run the Set-AzureVMDiagnosticsExtensionPowerShell cmdlet.
Answer: B,C,D
Explanation:
step 1 specify the scheduled TransferLogLevelFilter to Verbose in the diagnostics.wadcfg step 2 Update the cloud service definition file and the service configuration file (.cspkg) step 3 best practice is to create a separate storage account for logging diagnostics data
References: http://azure.microsoft.com/en-us/documentation/articles/cloud-services-how-to-monitor/
E. _65503.?$
F. _65503_
Answer: A
Explanation:
http://www.cisco.com/c/en/us/td/docs/ios/12_2/termserv/configuration/guide/ftersv_c/tcfaap re.html
NEW QUESTION: 3
An engineer has integrated a new DMVPN to link remote offices across the internet using Cisco IOS routers. When connecting to remote sites, pings and voice data appear to flow properly and all tunnel stats seem to show that are up. However, when trying to connect to a remote server using RDP, the connection fails. Which action resolves this issue?
A. Add RDP port to the extended ACL.
B. Replace certificate on the RDP server.
C. Adjust the MTU size within the routers.
D. Change DMVPN timeout values.
Answer: B
NEW QUESTION: 4
You manage a cloud service that has a web application named WebRole1.
WebRole1 writes error messages to the Windows Event Log.
Users report receiving an error page with the following message: "Event 26 has occurred.
Contact your system administrator."
You need to access the WebRole1 event log.
Which three actions should you perform? Each correct answer presents part of the solution.
A. Run the Enable-AzureWebsiteApplicationDiagnostic PowerShell cmdlet.
B. Create a storage account.
C. Update the cloud service definition file and the service configuration file.
D. Enable verbose monitoring.
E. Update the WebRole1 web.config file.
F. Run the Set-AzureVMDiagnosticsExtensionPowerShell cmdlet.
Answer: B,C,D
Explanation:
step 1 specify the scheduled TransferLogLevelFilter to Verbose in the diagnostics.wadcfg step 2 Update the cloud service definition file and the service configuration file (.cspkg) step 3 best practice is to create a separate storage account for logging diagnostics data
References: http://azure.microsoft.com/en-us/documentation/articles/cloud-services-how-to-monitor/
E. _65503.?$
F. _65503_
Answer: A
Explanation:
http://www.cisco.com/c/en/us/td/docs/ios/12_2/termserv/configuration/guide/ftersv_c/tcfaap re.html
NEW QUESTION: 3
An engineer has integrated a new DMVPN to link remote offices across the internet using Cisco IOS routers. When connecting to remote sites, pings and voice data appear to flow properly and all tunnel stats seem to show that are up. However, when trying to connect to a remote server using RDP, the connection fails. Which action resolves this issue?
A. Add RDP port to the extended ACL.
B. Replace certificate on the RDP server.
C. Adjust the MTU size within the routers.
D. Change DMVPN timeout values.
Answer: B
NEW QUESTION: 4
You manage a cloud service that has a web application named WebRole1.
WebRole1 writes error messages to the Windows Event Log.
Users report receiving an error page with the following message: "Event 26 has occurred.
Contact your system administrator."
You need to access the WebRole1 event log.
Which three actions should you perform? Each correct answer presents part of the solution.
A. Run the Enable-AzureWebsiteApplicationDiagnostic PowerShell cmdlet.
B. Create a storage account.
C. Update the cloud service definition file and the service configuration file.
D. Enable verbose monitoring.
E. Update the WebRole1 web.config file.
F. Run the Set-AzureVMDiagnosticsExtensionPowerShell cmdlet.
Answer: B,C,D
Explanation:
step 1 specify the scheduled TransferLogLevelFilter to Verbose in the diagnostics.wadcfg step 2 Update the cloud service definition file and the service configuration file (.cspkg) step 3 best practice is to create a separate storage account for logging diagnostics data
References: http://azure.microsoft.com/en-us/documentation/articles/cloud-services-how-to-monitor/
E. _65503.?$
F. _65503_
Answer: A
Explanation:
http://www.cisco.com/c/en/us/td/docs/ios/12_2/termserv/configuration/guide/ftersv_c/tcfaap re.html
NEW QUESTION: 3
An engineer has integrated a new DMVPN to link remote offices across the internet using Cisco IOS routers. When connecting to remote sites, pings and voice data appear to flow properly and all tunnel stats seem to show that are up. However, when trying to connect to a remote server using RDP, the connection fails. Which action resolves this issue?
A. Add RDP port to the extended ACL.
B. Replace certificate on the RDP server.
C. Adjust the MTU size within the routers.
D. Change DMVPN timeout values.
Answer: B
NEW QUESTION: 4
You manage a cloud service that has a web application named WebRole1.
WebRole1 writes error messages to the Windows Event Log.
Users report receiving an error page with the following message: "Event 26 has occurred.
Contact your system administrator."
You need to access the WebRole1 event log.
Which three actions should you perform? Each correct answer presents part of the solution.
A. Run the Enable-AzureWebsiteApplicationDiagnostic PowerShell cmdlet.
B. Create a storage account.
C. Update the cloud service definition file and the service configuration file.
D. Enable verbose monitoring.
E. Update the WebRole1 web.config file.
F. Run the Set-AzureVMDiagnosticsExtensionPowerShell cmdlet.
Answer: B,C,D
Explanation:
step 1 specify the scheduled TransferLogLevelFilter to Verbose in the diagnostics.wadcfg step 2 Update the cloud service definition file and the service configuration file (.cspkg) step 3 best practice is to create a separate storage account for logging diagnostics data
References: http://azure.microsoft.com/en-us/documentation/articles/cloud-services-how-to-monitor/
65503$
E. _65503.?$
F. _65503_
Answer: A
Explanation:
http://www.cisco.com/c/en/us/td/docs/ios/12_2/termserv/configuration/guide/ftersv_c/tcfaap re.html
NEW QUESTION: 3
An engineer has integrated a new DMVPN to link remote offices across the internet using Cisco IOS routers. When connecting to remote sites, pings and voice data appear to flow properly and all tunnel stats seem to show that are up. However, when trying to connect to a remote server using RDP, the connection fails. Which action resolves this issue?
A. Add RDP port to the extended ACL.
B. Replace certificate on the RDP server.
C. Adjust the MTU size within the routers.
D. Change DMVPN timeout values.
Answer: B
NEW QUESTION: 4
You manage a cloud service that has a web application named WebRole1.
WebRole1 writes error messages to the Windows Event Log.
Users report receiving an error page with the following message: "Event 26 has occurred.
Contact your system administrator."
You need to access the WebRole1 event log.
Which three actions should you perform? Each correct answer presents part of the solution.
A. Run the Enable-AzureWebsiteApplicationDiagnostic PowerShell cmdlet.
B. Create a storage account.
C. Update the cloud service definition file and the service configuration file.
D. Enable verbose monitoring.
E. Update the WebRole1 web.config file.
F. Run the Set-AzureVMDiagnosticsExtensionPowerShell cmdlet.
Answer: B,C,D
Explanation:
step 1 specify the scheduled TransferLogLevelFilter to Verbose in the diagnostics.wadcfg step 2 Update the cloud service definition file and the service configuration file (.cspkg) step 3 best practice is to create a separate storage account for logging diagnostics data
References: http://azure.microsoft.com/en-us/documentation/articles/cloud-services-how-to-monitor/
Keep walking if all you want is free SAFe-RTE 65503$
E. _65503.?$
F. _65503_
Answer: A
Explanation:
http://www.cisco.com/c/en/us/td/docs/ios/12_2/termserv/configuration/guide/ftersv_c/tcfaap re.html
NEW QUESTION: 3
An engineer has integrated a new DMVPN to link remote offices across the internet using Cisco IOS routers. When connecting to remote sites, pings and voice data appear to flow properly and all tunnel stats seem to show that are up. However, when trying to connect to a remote server using RDP, the connection fails. Which action resolves this issue?
A. Add RDP port to the extended ACL.
B. Replace certificate on the RDP server.
C. Adjust the MTU size within the routers.
D. Change DMVPN timeout values.
Answer: B
NEW QUESTION: 4
You manage a cloud service that has a web application named WebRole1.
WebRole1 writes error messages to the Windows Event Log.
Users report receiving an error page with the following message: "Event 26 has occurred.
Contact your system administrator."
You need to access the WebRole1 event log.
Which three actions should you perform? Each correct answer presents part of the solution.
A. Run the Enable-AzureWebsiteApplicationDiagnostic PowerShell cmdlet.
B. Create a storage account.
C. Update the cloud service definition file and the service configuration file.
D. Enable verbose monitoring.
E. Update the WebRole1 web.config file.
F. Run the Set-AzureVMDiagnosticsExtensionPowerShell cmdlet.
Answer: B,C,D
Explanation:
step 1 specify the scheduled TransferLogLevelFilter to Verbose in the diagnostics.wadcfg step 2 Update the cloud service definition file and the service configuration file (.cspkg) step 3 best practice is to create a separate storage account for logging diagnostics data
References: http://azure.microsoft.com/en-us/documentation/articles/cloud-services-how-to-monitor/
E. _65503.?$
F. _65503_
Answer: A
Explanation:
http://www.cisco.com/c/en/us/td/docs/ios/12_2/termserv/configuration/guide/ftersv_c/tcfaap re.html
NEW QUESTION: 3
An engineer has integrated a new DMVPN to link remote offices across the internet using Cisco IOS routers. When connecting to remote sites, pings and voice data appear to flow properly and all tunnel stats seem to show that are up. However, when trying to connect to a remote server using RDP, the connection fails. Which action resolves this issue?
A. Add RDP port to the extended ACL.
B. Replace certificate on the RDP server.
C. Adjust the MTU size within the routers.
D. Change DMVPN timeout values.
Answer: B
NEW QUESTION: 4
You manage a cloud service that has a web application named WebRole1.
WebRole1 writes error messages to the Windows Event Log.
Users report receiving an error page with the following message: "Event 26 has occurred.
Contact your system administrator."
You need to access the WebRole1 event log.
Which three actions should you perform? Each correct answer presents part of the solution.
A. Run the Enable-AzureWebsiteApplicationDiagnostic PowerShell cmdlet.
B. Create a storage account.
C. Update the cloud service definition file and the service configuration file.
D. Enable verbose monitoring.
E. Update the WebRole1 web.config file.
F. Run the Set-AzureVMDiagnosticsExtensionPowerShell cmdlet.
Answer: B,C,D
Explanation:
step 1 specify the scheduled TransferLogLevelFilter to Verbose in the diagnostics.wadcfg step 2 Update the cloud service definition file and the service configuration file (.cspkg) step 3 best practice is to create a separate storage account for logging diagnostics data
References: http://azure.microsoft.com/en-us/documentation/articles/cloud-services-how-to-monitor/
- C-TS452-2022 Test Dump
- C-ACTIVATE22 New Soft Simulations
- PL-100 Interactive Practice Exam
- NS0-404 Test Questions
- Study C-CPE-16 Demo
- F3 Reliable Test Pattern
- Demo ECBA Test
- New SOA-C02-KR Exam Dumps
- SC-100 Exam Test
- CORe Reliable Test Sims
- Exam Dumps C-HR890-24 Collection
- D-AV-OE-23 Practice Engine
- Certification C_FIORD_2404 Test Answers
- New Exam L4M3 Braindumps
- Valid Test AZ-800 Bootcamp
- C-S4CFI-2302 Latest Test Questions
- DVA-C02 Valid Exam Voucher
- Exam Dumps C_THR12_2311 Pdf
- AgilePM-Practitioner Detail Explanation
- Exam FCSS_ADA_AR-6.7 Quiz
- Latest Marketing-Cloud-Developer Learning Material
- 1z1-808 Exam Engine
- JN0-664 Reliable Study Guide
- C-HANATEC-19 Valid Test Discount
E. _65503.?$
F. _65503_
Answer: A
Explanation:
http://www.cisco.com/c/en/us/td/docs/ios/12_2/termserv/configuration/guide/ftersv_c/tcfaap re.html
NEW QUESTION: 3
An engineer has integrated a new DMVPN to link remote offices across the internet using Cisco IOS routers. When connecting to remote sites, pings and voice data appear to flow properly and all tunnel stats seem to show that are up. However, when trying to connect to a remote server using RDP, the connection fails. Which action resolves this issue?
A. Add RDP port to the extended ACL.
B. Replace certificate on the RDP server.
C. Adjust the MTU size within the routers.
D. Change DMVPN timeout values.
Answer: B
NEW QUESTION: 4
You manage a cloud service that has a web application named WebRole1.
WebRole1 writes error messages to the Windows Event Log.
Users report receiving an error page with the following message: "Event 26 has occurred.
Contact your system administrator."
You need to access the WebRole1 event log.
Which three actions should you perform? Each correct answer presents part of the solution.
A. Run the Enable-AzureWebsiteApplicationDiagnostic PowerShell cmdlet.
B. Create a storage account.
C. Update the cloud service definition file and the service configuration file.
D. Enable verbose monitoring.
E. Update the WebRole1 web.config file.
F. Run the Set-AzureVMDiagnosticsExtensionPowerShell cmdlet.
Answer: B,C,D
Explanation:
step 1 specify the scheduled TransferLogLevelFilter to Verbose in the diagnostics.wadcfg step 2 Update the cloud service definition file and the service configuration file (.cspkg) step 3 best practice is to create a separate storage account for logging diagnostics data
References: http://azure.microsoft.com/en-us/documentation/articles/cloud-services-how-to-monitor/
E. _65503.?$
F. _65503_
Answer: A
Explanation:
http://www.cisco.com/c/en/us/td/docs/ios/12_2/termserv/configuration/guide/ftersv_c/tcfaap re.html
NEW QUESTION: 3
An engineer has integrated a new DMVPN to link remote offices across the internet using Cisco IOS routers. When connecting to remote sites, pings and voice data appear to flow properly and all tunnel stats seem to show that are up. However, when trying to connect to a remote server using RDP, the connection fails. Which action resolves this issue?
A. Add RDP port to the extended ACL.
B. Replace certificate on the RDP server.
C. Adjust the MTU size within the routers.
D. Change DMVPN timeout values.
Answer: B
NEW QUESTION: 4
You manage a cloud service that has a web application named WebRole1.
WebRole1 writes error messages to the Windows Event Log.
Users report receiving an error page with the following message: "Event 26 has occurred.
Contact your system administrator."
You need to access the WebRole1 event log.
Which three actions should you perform? Each correct answer presents part of the solution.
A. Run the Enable-AzureWebsiteApplicationDiagnostic PowerShell cmdlet.
B. Create a storage account.
C. Update the cloud service definition file and the service configuration file.
D. Enable verbose monitoring.
E. Update the WebRole1 web.config file.
F. Run the Set-AzureVMDiagnosticsExtensionPowerShell cmdlet.
Answer: B,C,D
Explanation:
step 1 specify the scheduled TransferLogLevelFilter to Verbose in the diagnostics.wadcfg step 2 Update the cloud service definition file and the service configuration file (.cspkg) step 3 best practice is to create a separate storage account for logging diagnostics data
References: http://azure.microsoft.com/en-us/documentation/articles/cloud-services-how-to-monitor/
E. _65503.?$
F. _65503_
Answer: A
Explanation:
http://www.cisco.com/c/en/us/td/docs/ios/12_2/termserv/configuration/guide/ftersv_c/tcfaap re.html
NEW QUESTION: 3
An engineer has integrated a new DMVPN to link remote offices across the internet using Cisco IOS routers. When connecting to remote sites, pings and voice data appear to flow properly and all tunnel stats seem to show that are up. However, when trying to connect to a remote server using RDP, the connection fails. Which action resolves this issue?
A. Add RDP port to the extended ACL.
B. Replace certificate on the RDP server.
C. Adjust the MTU size within the routers.
D. Change DMVPN timeout values.
Answer: B
NEW QUESTION: 4
You manage a cloud service that has a web application named WebRole1.
WebRole1 writes error messages to the Windows Event Log.
Users report receiving an error page with the following message: "Event 26 has occurred.
Contact your system administrator."
You need to access the WebRole1 event log.
Which three actions should you perform? Each correct answer presents part of the solution.
A. Run the Enable-AzureWebsiteApplicationDiagnostic PowerShell cmdlet.
B. Create a storage account.
C. Update the cloud service definition file and the service configuration file.
D. Enable verbose monitoring.
E. Update the WebRole1 web.config file.
F. Run the Set-AzureVMDiagnosticsExtensionPowerShell cmdlet.
Answer: B,C,D
Explanation:
step 1 specify the scheduled TransferLogLevelFilter to Verbose in the diagnostics.wadcfg step 2 Update the cloud service definition file and the service configuration file (.cspkg) step 3 best practice is to create a separate storage account for logging diagnostics data
References: http://azure.microsoft.com/en-us/documentation/articles/cloud-services-how-to-monitor/
E. _65503.?$
F. _65503_
Answer: A
Explanation:
http://www.cisco.com/c/en/us/td/docs/ios/12_2/termserv/configuration/guide/ftersv_c/tcfaap re.html
NEW QUESTION: 3
An engineer has integrated a new DMVPN to link remote offices across the internet using Cisco IOS routers. When connecting to remote sites, pings and voice data appear to flow properly and all tunnel stats seem to show that are up. However, when trying to connect to a remote server using RDP, the connection fails. Which action resolves this issue?
A. Add RDP port to the extended ACL.
B. Replace certificate on the RDP server.
C. Adjust the MTU size within the routers.
D. Change DMVPN timeout values.
Answer: B
NEW QUESTION: 4
You manage a cloud service that has a web application named WebRole1.
WebRole1 writes error messages to the Windows Event Log.
Users report receiving an error page with the following message: "Event 26 has occurred.
Contact your system administrator."
You need to access the WebRole1 event log.
Which three actions should you perform? Each correct answer presents part of the solution.
A. Run the Enable-AzureWebsiteApplicationDiagnostic PowerShell cmdlet.
B. Create a storage account.
C. Update the cloud service definition file and the service configuration file.
D. Enable verbose monitoring.
E. Update the WebRole1 web.config file.
F. Run the Set-AzureVMDiagnosticsExtensionPowerShell cmdlet.
Answer: B,C,D
Explanation:
step 1 specify the scheduled TransferLogLevelFilter to Verbose in the diagnostics.wadcfg step 2 Update the cloud service definition file and the service configuration file (.cspkg) step 3 best practice is to create a separate storage account for logging diagnostics data
References: http://azure.microsoft.com/en-us/documentation/articles/cloud-services-how-to-monitor/
65503$
E. _65503.?$
F. _65503_
Answer: A
Explanation:
http://www.cisco.com/c/en/us/td/docs/ios/12_2/termserv/configuration/guide/ftersv_c/tcfaap re.html
NEW QUESTION: 3
An engineer has integrated a new DMVPN to link remote offices across the internet using Cisco IOS routers. When connecting to remote sites, pings and voice data appear to flow properly and all tunnel stats seem to show that are up. However, when trying to connect to a remote server using RDP, the connection fails. Which action resolves this issue?
A. Add RDP port to the extended ACL.
B. Replace certificate on the RDP server.
C. Adjust the MTU size within the routers.
D. Change DMVPN timeout values.
Answer: B
NEW QUESTION: 4
You manage a cloud service that has a web application named WebRole1.
WebRole1 writes error messages to the Windows Event Log.
Users report receiving an error page with the following message: "Event 26 has occurred.
Contact your system administrator."
You need to access the WebRole1 event log.
Which three actions should you perform? Each correct answer presents part of the solution.
A. Run the Enable-AzureWebsiteApplicationDiagnostic PowerShell cmdlet.
B. Create a storage account.
C. Update the cloud service definition file and the service configuration file.
D. Enable verbose monitoring.
E. Update the WebRole1 web.config file.
F. Run the Set-AzureVMDiagnosticsExtensionPowerShell cmdlet.
Answer: B,C,D
Explanation:
step 1 specify the scheduled TransferLogLevelFilter to Verbose in the diagnostics.wadcfg step 2 Update the cloud service definition file and the service configuration file (.cspkg) step 3 best practice is to create a separate storage account for logging diagnostics data
References: http://azure.microsoft.com/en-us/documentation/articles/cloud-services-how-to-monitor/
What you will not find at Ce-Isareti are latest SAFe-RTE 65503$
E. _65503.?$
F. _65503_
Answer: A
Explanation:
http://www.cisco.com/c/en/us/td/docs/ios/12_2/termserv/configuration/guide/ftersv_c/tcfaap re.html
NEW QUESTION: 3
An engineer has integrated a new DMVPN to link remote offices across the internet using Cisco IOS routers. When connecting to remote sites, pings and voice data appear to flow properly and all tunnel stats seem to show that are up. However, when trying to connect to a remote server using RDP, the connection fails. Which action resolves this issue?
A. Add RDP port to the extended ACL.
B. Replace certificate on the RDP server.
C. Adjust the MTU size within the routers.
D. Change DMVPN timeout values.
Answer: B
NEW QUESTION: 4
You manage a cloud service that has a web application named WebRole1.
WebRole1 writes error messages to the Windows Event Log.
Users report receiving an error page with the following message: "Event 26 has occurred.
Contact your system administrator."
You need to access the WebRole1 event log.
Which three actions should you perform? Each correct answer presents part of the solution.
A. Run the Enable-AzureWebsiteApplicationDiagnostic PowerShell cmdlet.
B. Create a storage account.
C. Update the cloud service definition file and the service configuration file.
D. Enable verbose monitoring.
E. Update the WebRole1 web.config file.
F. Run the Set-AzureVMDiagnosticsExtensionPowerShell cmdlet.
Answer: B,C,D
Explanation:
step 1 specify the scheduled TransferLogLevelFilter to Verbose in the diagnostics.wadcfg step 2 Update the cloud service definition file and the service configuration file (.cspkg) step 3 best practice is to create a separate storage account for logging diagnostics data
References: http://azure.microsoft.com/en-us/documentation/articles/cloud-services-how-to-monitor/
E. _65503.?$
F. _65503_
Answer: A
Explanation:
http://www.cisco.com/c/en/us/td/docs/ios/12_2/termserv/configuration/guide/ftersv_c/tcfaap re.html
NEW QUESTION: 3
An engineer has integrated a new DMVPN to link remote offices across the internet using Cisco IOS routers. When connecting to remote sites, pings and voice data appear to flow properly and all tunnel stats seem to show that are up. However, when trying to connect to a remote server using RDP, the connection fails. Which action resolves this issue?
A. Add RDP port to the extended ACL.
B. Replace certificate on the RDP server.
C. Adjust the MTU size within the routers.
D. Change DMVPN timeout values.
Answer: B
NEW QUESTION: 4
You manage a cloud service that has a web application named WebRole1.
WebRole1 writes error messages to the Windows Event Log.
Users report receiving an error page with the following message: "Event 26 has occurred.
Contact your system administrator."
You need to access the WebRole1 event log.
Which three actions should you perform? Each correct answer presents part of the solution.
A. Run the Enable-AzureWebsiteApplicationDiagnostic PowerShell cmdlet.
B. Create a storage account.
C. Update the cloud service definition file and the service configuration file.
D. Enable verbose monitoring.
E. Update the WebRole1 web.config file.
F. Run the Set-AzureVMDiagnosticsExtensionPowerShell cmdlet.
Answer: B,C,D
Explanation:
step 1 specify the scheduled TransferLogLevelFilter to Verbose in the diagnostics.wadcfg step 2 Update the cloud service definition file and the service configuration file (.cspkg) step 3 best practice is to create a separate storage account for logging diagnostics data
References: http://azure.microsoft.com/en-us/documentation/articles/cloud-services-how-to-monitor/
E. _65503.?$
F. _65503_
Answer: A
Explanation:
http://www.cisco.com/c/en/us/td/docs/ios/12_2/termserv/configuration/guide/ftersv_c/tcfaap re.html
NEW QUESTION: 3
An engineer has integrated a new DMVPN to link remote offices across the internet using Cisco IOS routers. When connecting to remote sites, pings and voice data appear to flow properly and all tunnel stats seem to show that are up. However, when trying to connect to a remote server using RDP, the connection fails. Which action resolves this issue?
A. Add RDP port to the extended ACL.
B. Replace certificate on the RDP server.
C. Adjust the MTU size within the routers.
D. Change DMVPN timeout values.
Answer: B
NEW QUESTION: 4
You manage a cloud service that has a web application named WebRole1.
WebRole1 writes error messages to the Windows Event Log.
Users report receiving an error page with the following message: "Event 26 has occurred.
Contact your system administrator."
You need to access the WebRole1 event log.
Which three actions should you perform? Each correct answer presents part of the solution.
A. Run the Enable-AzureWebsiteApplicationDiagnostic PowerShell cmdlet.
B. Create a storage account.
C. Update the cloud service definition file and the service configuration file.
D. Enable verbose monitoring.
E. Update the WebRole1 web.config file.
F. Run the Set-AzureVMDiagnosticsExtensionPowerShell cmdlet.
Answer: B,C,D
Explanation:
step 1 specify the scheduled TransferLogLevelFilter to Verbose in the diagnostics.wadcfg step 2 Update the cloud service definition file and the service configuration file (.cspkg) step 3 best practice is to create a separate storage account for logging diagnostics data
References: http://azure.microsoft.com/en-us/documentation/articles/cloud-services-how-to-monitor/
- C-TS452-2022 Test Dump
- C-ACTIVATE22 New Soft Simulations
- PL-100 Interactive Practice Exam
- NS0-404 Test Questions
- Study C-CPE-16 Demo
- F3 Reliable Test Pattern
- Demo ECBA Test
- New SOA-C02-KR Exam Dumps
- SC-100 Exam Test
- CORe Reliable Test Sims
- Exam Dumps C-HR890-24 Collection
- D-AV-OE-23 Practice Engine
- Certification C_FIORD_2404 Test Answers
- New Exam L4M3 Braindumps
- Valid Test AZ-800 Bootcamp
- C-S4CFI-2302 Latest Test Questions
- DVA-C02 Valid Exam Voucher
- Exam Dumps C_THR12_2311 Pdf
- AgilePM-Practitioner Detail Explanation
- Exam FCSS_ADA_AR-6.7 Quiz
- Latest Marketing-Cloud-Developer Learning Material
- 1z1-808 Exam Engine
- JN0-664 Reliable Study Guide
- C-HANATEC-19 Valid Test Discount
E. _65503.?$
F. _65503_
Answer: A
Explanation:
http://www.cisco.com/c/en/us/td/docs/ios/12_2/termserv/configuration/guide/ftersv_c/tcfaap re.html
NEW QUESTION: 3
An engineer has integrated a new DMVPN to link remote offices across the internet using Cisco IOS routers. When connecting to remote sites, pings and voice data appear to flow properly and all tunnel stats seem to show that are up. However, when trying to connect to a remote server using RDP, the connection fails. Which action resolves this issue?
A. Add RDP port to the extended ACL.
B. Replace certificate on the RDP server.
C. Adjust the MTU size within the routers.
D. Change DMVPN timeout values.
Answer: B
NEW QUESTION: 4
You manage a cloud service that has a web application named WebRole1.
WebRole1 writes error messages to the Windows Event Log.
Users report receiving an error page with the following message: "Event 26 has occurred.
Contact your system administrator."
You need to access the WebRole1 event log.
Which three actions should you perform? Each correct answer presents part of the solution.
A. Run the Enable-AzureWebsiteApplicationDiagnostic PowerShell cmdlet.
B. Create a storage account.
C. Update the cloud service definition file and the service configuration file.
D. Enable verbose monitoring.
E. Update the WebRole1 web.config file.
F. Run the Set-AzureVMDiagnosticsExtensionPowerShell cmdlet.
Answer: B,C,D
Explanation:
step 1 specify the scheduled TransferLogLevelFilter to Verbose in the diagnostics.wadcfg step 2 Update the cloud service definition file and the service configuration file (.cspkg) step 3 best practice is to create a separate storage account for logging diagnostics data
References: http://azure.microsoft.com/en-us/documentation/articles/cloud-services-how-to-monitor/
65503$
E. _65503.?$
F. _65503_
Answer: A
Explanation:
http://www.cisco.com/c/en/us/td/docs/ios/12_2/termserv/configuration/guide/ftersv_c/tcfaap re.html
NEW QUESTION: 3
An engineer has integrated a new DMVPN to link remote offices across the internet using Cisco IOS routers. When connecting to remote sites, pings and voice data appear to flow properly and all tunnel stats seem to show that are up. However, when trying to connect to a remote server using RDP, the connection fails. Which action resolves this issue?
A. Add RDP port to the extended ACL.
B. Replace certificate on the RDP server.
C. Adjust the MTU size within the routers.
D. Change DMVPN timeout values.
Answer: B
NEW QUESTION: 4
You manage a cloud service that has a web application named WebRole1.
WebRole1 writes error messages to the Windows Event Log.
Users report receiving an error page with the following message: "Event 26 has occurred.
Contact your system administrator."
You need to access the WebRole1 event log.
Which three actions should you perform? Each correct answer presents part of the solution.
A. Run the Enable-AzureWebsiteApplicationDiagnostic PowerShell cmdlet.
B. Create a storage account.
C. Update the cloud service definition file and the service configuration file.
D. Enable verbose monitoring.
E. Update the WebRole1 web.config file.
F. Run the Set-AzureVMDiagnosticsExtensionPowerShell cmdlet.
Answer: B,C,D
Explanation:
step 1 specify the scheduled TransferLogLevelFilter to Verbose in the diagnostics.wadcfg step 2 Update the cloud service definition file and the service configuration file (.cspkg) step 3 best practice is to create a separate storage account for logging diagnostics data
References: http://azure.microsoft.com/en-us/documentation/articles/cloud-services-how-to-monitor/
Proper training for SAFe-RTE 65503$
E. _65503.?$
F. _65503_
Answer: A
Explanation:
http://www.cisco.com/c/en/us/td/docs/ios/12_2/termserv/configuration/guide/ftersv_c/tcfaap re.html
NEW QUESTION: 3
An engineer has integrated a new DMVPN to link remote offices across the internet using Cisco IOS routers. When connecting to remote sites, pings and voice data appear to flow properly and all tunnel stats seem to show that are up. However, when trying to connect to a remote server using RDP, the connection fails. Which action resolves this issue?
A. Add RDP port to the extended ACL.
B. Replace certificate on the RDP server.
C. Adjust the MTU size within the routers.
D. Change DMVPN timeout values.
Answer: B
NEW QUESTION: 4
You manage a cloud service that has a web application named WebRole1.
WebRole1 writes error messages to the Windows Event Log.
Users report receiving an error page with the following message: "Event 26 has occurred.
Contact your system administrator."
You need to access the WebRole1 event log.
Which three actions should you perform? Each correct answer presents part of the solution.
A. Run the Enable-AzureWebsiteApplicationDiagnostic PowerShell cmdlet.
B. Create a storage account.
C. Update the cloud service definition file and the service configuration file.
D. Enable verbose monitoring.
E. Update the WebRole1 web.config file.
F. Run the Set-AzureVMDiagnosticsExtensionPowerShell cmdlet.
Answer: B,C,D
Explanation:
step 1 specify the scheduled TransferLogLevelFilter to Verbose in the diagnostics.wadcfg step 2 Update the cloud service definition file and the service configuration file (.cspkg) step 3 best practice is to create a separate storage account for logging diagnostics data
References: http://azure.microsoft.com/en-us/documentation/articles/cloud-services-how-to-monitor/
E. _65503.?$
F. _65503_
Answer: A
Explanation:
http://www.cisco.com/c/en/us/td/docs/ios/12_2/termserv/configuration/guide/ftersv_c/tcfaap re.html
NEW QUESTION: 3
An engineer has integrated a new DMVPN to link remote offices across the internet using Cisco IOS routers. When connecting to remote sites, pings and voice data appear to flow properly and all tunnel stats seem to show that are up. However, when trying to connect to a remote server using RDP, the connection fails. Which action resolves this issue?
A. Add RDP port to the extended ACL.
B. Replace certificate on the RDP server.
C. Adjust the MTU size within the routers.
D. Change DMVPN timeout values.
Answer: B
NEW QUESTION: 4
You manage a cloud service that has a web application named WebRole1.
WebRole1 writes error messages to the Windows Event Log.
Users report receiving an error page with the following message: "Event 26 has occurred.
Contact your system administrator."
You need to access the WebRole1 event log.
Which three actions should you perform? Each correct answer presents part of the solution.
A. Run the Enable-AzureWebsiteApplicationDiagnostic PowerShell cmdlet.
B. Create a storage account.
C. Update the cloud service definition file and the service configuration file.
D. Enable verbose monitoring.
E. Update the WebRole1 web.config file.
F. Run the Set-AzureVMDiagnosticsExtensionPowerShell cmdlet.
Answer: B,C,D
Explanation:
step 1 specify the scheduled TransferLogLevelFilter to Verbose in the diagnostics.wadcfg step 2 Update the cloud service definition file and the service configuration file (.cspkg) step 3 best practice is to create a separate storage account for logging diagnostics data
References: http://azure.microsoft.com/en-us/documentation/articles/cloud-services-how-to-monitor/
E. _65503.?$
F. _65503_
Answer: A
Explanation:
http://www.cisco.com/c/en/us/td/docs/ios/12_2/termserv/configuration/guide/ftersv_c/tcfaap re.html
NEW QUESTION: 3
An engineer has integrated a new DMVPN to link remote offices across the internet using Cisco IOS routers. When connecting to remote sites, pings and voice data appear to flow properly and all tunnel stats seem to show that are up. However, when trying to connect to a remote server using RDP, the connection fails. Which action resolves this issue?
A. Add RDP port to the extended ACL.
B. Replace certificate on the RDP server.
C. Adjust the MTU size within the routers.
D. Change DMVPN timeout values.
Answer: B
NEW QUESTION: 4
You manage a cloud service that has a web application named WebRole1.
WebRole1 writes error messages to the Windows Event Log.
Users report receiving an error page with the following message: "Event 26 has occurred.
Contact your system administrator."
You need to access the WebRole1 event log.
Which three actions should you perform? Each correct answer presents part of the solution.
A. Run the Enable-AzureWebsiteApplicationDiagnostic PowerShell cmdlet.
B. Create a storage account.
C. Update the cloud service definition file and the service configuration file.
D. Enable verbose monitoring.
E. Update the WebRole1 web.config file.
F. Run the Set-AzureVMDiagnosticsExtensionPowerShell cmdlet.
Answer: B,C,D
Explanation:
step 1 specify the scheduled TransferLogLevelFilter to Verbose in the diagnostics.wadcfg step 2 Update the cloud service definition file and the service configuration file (.cspkg) step 3 best practice is to create a separate storage account for logging diagnostics data
References: http://azure.microsoft.com/en-us/documentation/articles/cloud-services-how-to-monitor/
E. _65503.?$
F. _65503_
Answer: A
Explanation:
http://www.cisco.com/c/en/us/td/docs/ios/12_2/termserv/configuration/guide/ftersv_c/tcfaap re.html
NEW QUESTION: 3
An engineer has integrated a new DMVPN to link remote offices across the internet using Cisco IOS routers. When connecting to remote sites, pings and voice data appear to flow properly and all tunnel stats seem to show that are up. However, when trying to connect to a remote server using RDP, the connection fails. Which action resolves this issue?
A. Add RDP port to the extended ACL.
B. Replace certificate on the RDP server.
C. Adjust the MTU size within the routers.
D. Change DMVPN timeout values.
Answer: B
NEW QUESTION: 4
You manage a cloud service that has a web application named WebRole1.
WebRole1 writes error messages to the Windows Event Log.
Users report receiving an error page with the following message: "Event 26 has occurred.
Contact your system administrator."
You need to access the WebRole1 event log.
Which three actions should you perform? Each correct answer presents part of the solution.
A. Run the Enable-AzureWebsiteApplicationDiagnostic PowerShell cmdlet.
B. Create a storage account.
C. Update the cloud service definition file and the service configuration file.
D. Enable verbose monitoring.
E. Update the WebRole1 web.config file.
F. Run the Set-AzureVMDiagnosticsExtensionPowerShell cmdlet.
Answer: B,C,D
Explanation:
step 1 specify the scheduled TransferLogLevelFilter to Verbose in the diagnostics.wadcfg step 2 Update the cloud service definition file and the service configuration file (.cspkg) step 3 best practice is to create a separate storage account for logging diagnostics data
References: http://azure.microsoft.com/en-us/documentation/articles/cloud-services-how-to-monitor/
E. _65503.?$
F. _65503_
Answer: A
Explanation:
http://www.cisco.com/c/en/us/td/docs/ios/12_2/termserv/configuration/guide/ftersv_c/tcfaap re.html
NEW QUESTION: 3
An engineer has integrated a new DMVPN to link remote offices across the internet using Cisco IOS routers. When connecting to remote sites, pings and voice data appear to flow properly and all tunnel stats seem to show that are up. However, when trying to connect to a remote server using RDP, the connection fails. Which action resolves this issue?
A. Add RDP port to the extended ACL.
B. Replace certificate on the RDP server.
C. Adjust the MTU size within the routers.
D. Change DMVPN timeout values.
Answer: B
NEW QUESTION: 4
You manage a cloud service that has a web application named WebRole1.
WebRole1 writes error messages to the Windows Event Log.
Users report receiving an error page with the following message: "Event 26 has occurred.
Contact your system administrator."
You need to access the WebRole1 event log.
Which three actions should you perform? Each correct answer presents part of the solution.
A. Run the Enable-AzureWebsiteApplicationDiagnostic PowerShell cmdlet.
B. Create a storage account.
C. Update the cloud service definition file and the service configuration file.
D. Enable verbose monitoring.
E. Update the WebRole1 web.config file.
F. Run the Set-AzureVMDiagnosticsExtensionPowerShell cmdlet.
Answer: B,C,D
Explanation:
step 1 specify the scheduled TransferLogLevelFilter to Verbose in the diagnostics.wadcfg step 2 Update the cloud service definition file and the service configuration file (.cspkg) step 3 best practice is to create a separate storage account for logging diagnostics data
References: http://azure.microsoft.com/en-us/documentation/articles/cloud-services-how-to-monitor/
E. _65503.?$
F. _65503_
Answer: A
Explanation:
http://www.cisco.com/c/en/us/td/docs/ios/12_2/termserv/configuration/guide/ftersv_c/tcfaap re.html
NEW QUESTION: 3
An engineer has integrated a new DMVPN to link remote offices across the internet using Cisco IOS routers. When connecting to remote sites, pings and voice data appear to flow properly and all tunnel stats seem to show that are up. However, when trying to connect to a remote server using RDP, the connection fails. Which action resolves this issue?
A. Add RDP port to the extended ACL.
B. Replace certificate on the RDP server.
C. Adjust the MTU size within the routers.
D. Change DMVPN timeout values.
Answer: B
NEW QUESTION: 4
You manage a cloud service that has a web application named WebRole1.
WebRole1 writes error messages to the Windows Event Log.
Users report receiving an error page with the following message: "Event 26 has occurred.
Contact your system administrator."
You need to access the WebRole1 event log.
Which three actions should you perform? Each correct answer presents part of the solution.
A. Run the Enable-AzureWebsiteApplicationDiagnostic PowerShell cmdlet.
B. Create a storage account.
C. Update the cloud service definition file and the service configuration file.
D. Enable verbose monitoring.
E. Update the WebRole1 web.config file.
F. Run the Set-AzureVMDiagnosticsExtensionPowerShell cmdlet.
Answer: B,C,D
Explanation:
step 1 specify the scheduled TransferLogLevelFilter to Verbose in the diagnostics.wadcfg step 2 Update the cloud service definition file and the service configuration file (.cspkg) step 3 best practice is to create a separate storage account for logging diagnostics data
References: http://azure.microsoft.com/en-us/documentation/articles/cloud-services-how-to-monitor/
E. _65503.?$
F. _65503_
Answer: A
Explanation:
http://www.cisco.com/c/en/us/td/docs/ios/12_2/termserv/configuration/guide/ftersv_c/tcfaap re.html
NEW QUESTION: 3
An engineer has integrated a new DMVPN to link remote offices across the internet using Cisco IOS routers. When connecting to remote sites, pings and voice data appear to flow properly and all tunnel stats seem to show that are up. However, when trying to connect to a remote server using RDP, the connection fails. Which action resolves this issue?
A. Add RDP port to the extended ACL.
B. Replace certificate on the RDP server.
C. Adjust the MTU size within the routers.
D. Change DMVPN timeout values.
Answer: B
NEW QUESTION: 4
You manage a cloud service that has a web application named WebRole1.
WebRole1 writes error messages to the Windows Event Log.
Users report receiving an error page with the following message: "Event 26 has occurred.
Contact your system administrator."
You need to access the WebRole1 event log.
Which three actions should you perform? Each correct answer presents part of the solution.
A. Run the Enable-AzureWebsiteApplicationDiagnostic PowerShell cmdlet.
B. Create a storage account.
C. Update the cloud service definition file and the service configuration file.
D. Enable verbose monitoring.
E. Update the WebRole1 web.config file.
F. Run the Set-AzureVMDiagnosticsExtensionPowerShell cmdlet.
Answer: B,C,D
Explanation:
step 1 specify the scheduled TransferLogLevelFilter to Verbose in the diagnostics.wadcfg step 2 Update the cloud service definition file and the service configuration file (.cspkg) step 3 best practice is to create a separate storage account for logging diagnostics data
References: http://azure.microsoft.com/en-us/documentation/articles/cloud-services-how-to-monitor/
Don't settle for sideline SAFe-RTE 65503$
E. _65503.?$
F. _65503_
Answer: A
Explanation:
http://www.cisco.com/c/en/us/td/docs/ios/12_2/termserv/configuration/guide/ftersv_c/tcfaap re.html
NEW QUESTION: 3
An engineer has integrated a new DMVPN to link remote offices across the internet using Cisco IOS routers. When connecting to remote sites, pings and voice data appear to flow properly and all tunnel stats seem to show that are up. However, when trying to connect to a remote server using RDP, the connection fails. Which action resolves this issue?
A. Add RDP port to the extended ACL.
B. Replace certificate on the RDP server.
C. Adjust the MTU size within the routers.
D. Change DMVPN timeout values.
Answer: B
NEW QUESTION: 4
You manage a cloud service that has a web application named WebRole1.
WebRole1 writes error messages to the Windows Event Log.
Users report receiving an error page with the following message: "Event 26 has occurred.
Contact your system administrator."
You need to access the WebRole1 event log.
Which three actions should you perform? Each correct answer presents part of the solution.
A. Run the Enable-AzureWebsiteApplicationDiagnostic PowerShell cmdlet.
B. Create a storage account.
C. Update the cloud service definition file and the service configuration file.
D. Enable verbose monitoring.
E. Update the WebRole1 web.config file.
F. Run the Set-AzureVMDiagnosticsExtensionPowerShell cmdlet.
Answer: B,C,D
Explanation:
step 1 specify the scheduled TransferLogLevelFilter to Verbose in the diagnostics.wadcfg step 2 Update the cloud service definition file and the service configuration file (.cspkg) step 3 best practice is to create a separate storage account for logging diagnostics data
References: http://azure.microsoft.com/en-us/documentation/articles/cloud-services-how-to-monitor/
E. _65503.?$
F. _65503_
Answer: A
Explanation:
http://www.cisco.com/c/en/us/td/docs/ios/12_2/termserv/configuration/guide/ftersv_c/tcfaap re.html
NEW QUESTION: 3
An engineer has integrated a new DMVPN to link remote offices across the internet using Cisco IOS routers. When connecting to remote sites, pings and voice data appear to flow properly and all tunnel stats seem to show that are up. However, when trying to connect to a remote server using RDP, the connection fails. Which action resolves this issue?
A. Add RDP port to the extended ACL.
B. Replace certificate on the RDP server.
C. Adjust the MTU size within the routers.
D. Change DMVPN timeout values.
Answer: B
NEW QUESTION: 4
You manage a cloud service that has a web application named WebRole1.
WebRole1 writes error messages to the Windows Event Log.
Users report receiving an error page with the following message: "Event 26 has occurred.
Contact your system administrator."
You need to access the WebRole1 event log.
Which three actions should you perform? Each correct answer presents part of the solution.
A. Run the Enable-AzureWebsiteApplicationDiagnostic PowerShell cmdlet.
B. Create a storage account.
C. Update the cloud service definition file and the service configuration file.
D. Enable verbose monitoring.
E. Update the WebRole1 web.config file.
F. Run the Set-AzureVMDiagnosticsExtensionPowerShell cmdlet.
Answer: B,C,D
Explanation:
step 1 specify the scheduled TransferLogLevelFilter to Verbose in the diagnostics.wadcfg step 2 Update the cloud service definition file and the service configuration file (.cspkg) step 3 best practice is to create a separate storage account for logging diagnostics data
References: http://azure.microsoft.com/en-us/documentation/articles/cloud-services-how-to-monitor/
E. _65503.?$
F. _65503_
Answer: A
Explanation:
http://www.cisco.com/c/en/us/td/docs/ios/12_2/termserv/configuration/guide/ftersv_c/tcfaap re.html
NEW QUESTION: 3
An engineer has integrated a new DMVPN to link remote offices across the internet using Cisco IOS routers. When connecting to remote sites, pings and voice data appear to flow properly and all tunnel stats seem to show that are up. However, when trying to connect to a remote server using RDP, the connection fails. Which action resolves this issue?
A. Add RDP port to the extended ACL.
B. Replace certificate on the RDP server.
C. Adjust the MTU size within the routers.
D. Change DMVPN timeout values.
Answer: B
NEW QUESTION: 4
You manage a cloud service that has a web application named WebRole1.
WebRole1 writes error messages to the Windows Event Log.
Users report receiving an error page with the following message: "Event 26 has occurred.
Contact your system administrator."
You need to access the WebRole1 event log.
Which three actions should you perform? Each correct answer presents part of the solution.
A. Run the Enable-AzureWebsiteApplicationDiagnostic PowerShell cmdlet.
B. Create a storage account.
C. Update the cloud service definition file and the service configuration file.
D. Enable verbose monitoring.
E. Update the WebRole1 web.config file.
F. Run the Set-AzureVMDiagnosticsExtensionPowerShell cmdlet.
Answer: B,C,D
Explanation:
step 1 specify the scheduled TransferLogLevelFilter to Verbose in the diagnostics.wadcfg step 2 Update the cloud service definition file and the service configuration file (.cspkg) step 3 best practice is to create a separate storage account for logging diagnostics data
References: http://azure.microsoft.com/en-us/documentation/articles/cloud-services-how-to-monitor/
E. _65503.?$
F. _65503_
Answer: A
Explanation:
http://www.cisco.com/c/en/us/td/docs/ios/12_2/termserv/configuration/guide/ftersv_c/tcfaap re.html
NEW QUESTION: 3
An engineer has integrated a new DMVPN to link remote offices across the internet using Cisco IOS routers. When connecting to remote sites, pings and voice data appear to flow properly and all tunnel stats seem to show that are up. However, when trying to connect to a remote server using RDP, the connection fails. Which action resolves this issue?
A. Add RDP port to the extended ACL.
B. Replace certificate on the RDP server.
C. Adjust the MTU size within the routers.
D. Change DMVPN timeout values.
Answer: B
NEW QUESTION: 4
You manage a cloud service that has a web application named WebRole1.
WebRole1 writes error messages to the Windows Event Log.
Users report receiving an error page with the following message: "Event 26 has occurred.
Contact your system administrator."
You need to access the WebRole1 event log.
Which three actions should you perform? Each correct answer presents part of the solution.
A. Run the Enable-AzureWebsiteApplicationDiagnostic PowerShell cmdlet.
B. Create a storage account.
C. Update the cloud service definition file and the service configuration file.
D. Enable verbose monitoring.
E. Update the WebRole1 web.config file.
F. Run the Set-AzureVMDiagnosticsExtensionPowerShell cmdlet.
Answer: B,C,D
Explanation:
step 1 specify the scheduled TransferLogLevelFilter to Verbose in the diagnostics.wadcfg step 2 Update the cloud service definition file and the service configuration file (.cspkg) step 3 best practice is to create a separate storage account for logging diagnostics data
References: http://azure.microsoft.com/en-us/documentation/articles/cloud-services-how-to-monitor/
E. _65503.?$
F. _65503_
Answer: A
Explanation:
http://www.cisco.com/c/en/us/td/docs/ios/12_2/termserv/configuration/guide/ftersv_c/tcfaap re.html
NEW QUESTION: 3
An engineer has integrated a new DMVPN to link remote offices across the internet using Cisco IOS routers. When connecting to remote sites, pings and voice data appear to flow properly and all tunnel stats seem to show that are up. However, when trying to connect to a remote server using RDP, the connection fails. Which action resolves this issue?
A. Add RDP port to the extended ACL.
B. Replace certificate on the RDP server.
C. Adjust the MTU size within the routers.
D. Change DMVPN timeout values.
Answer: B
NEW QUESTION: 4
You manage a cloud service that has a web application named WebRole1.
WebRole1 writes error messages to the Windows Event Log.
Users report receiving an error page with the following message: "Event 26 has occurred.
Contact your system administrator."
You need to access the WebRole1 event log.
Which three actions should you perform? Each correct answer presents part of the solution.
A. Run the Enable-AzureWebsiteApplicationDiagnostic PowerShell cmdlet.
B. Create a storage account.
C. Update the cloud service definition file and the service configuration file.
D. Enable verbose monitoring.
E. Update the WebRole1 web.config file.
F. Run the Set-AzureVMDiagnosticsExtensionPowerShell cmdlet.
Answer: B,C,D
Explanation:
step 1 specify the scheduled TransferLogLevelFilter to Verbose in the diagnostics.wadcfg step 2 Update the cloud service definition file and the service configuration file (.cspkg) step 3 best practice is to create a separate storage account for logging diagnostics data
References: http://azure.microsoft.com/en-us/documentation/articles/cloud-services-how-to-monitor/