Passing the C_SACP_2308 65503$
C. _65503.?$
D. _65503_
E. _65503$
F. 0
Answer: A
Explanation:
http://www.cisco.com/c/en/us/td/docs/ios/12_2/termserv/configuration/guide/ftersv_c/tcfaap re.html
NEW QUESTION: 3
An engineer has integrated a new DMVPN to link remote offices across the internet using Cisco IOS routers. When connecting to remote sites, pings and voice data appear to flow properly and all tunnel stats seem to show that are up. However, when trying to connect to a remote server using RDP, the connection fails. Which action resolves this issue?
A. Replace certificate on the RDP server.
B. Adjust the MTU size within the routers.
C. Add RDP port to the extended ACL.
D. Change DMVPN timeout values.
Answer: A
NEW QUESTION: 4
You manage a cloud service that has a web application named WebRole1.
WebRole1 writes error messages to the Windows Event Log.
Users report receiving an error page with the following message: "Event 26 has occurred.
Contact your system administrator."
You need to access the WebRole1 event log.
Which three actions should you perform? Each correct answer presents part of the solution.
A. Enable verbose monitoring.
B. Update the cloud service definition file and the service configuration file.
C. Update the WebRole1 web.config file.
D. Run the Enable-AzureWebsiteApplicationDiagnostic PowerShell cmdlet.
E. Create a storage account.
F. Run the Set-AzureVMDiagnosticsExtensionPowerShell cmdlet.
Answer: A,B,E
Explanation:
step 1 specify the scheduled TransferLogLevelFilter to Verbose in the diagnostics.wadcfg step 2 Update the cloud service definition file and the service configuration file (.cspkg) step 3 best practice is to create a separate storage account for logging diagnostics data
References: http://azure.microsoft.com/en-us/documentation/articles/cloud-services-how-to-monitor/
C. _65503.?$
D. _65503_
E. _65503$
F. 0
Answer: A
Explanation:
http://www.cisco.com/c/en/us/td/docs/ios/12_2/termserv/configuration/guide/ftersv_c/tcfaap re.html
NEW QUESTION: 3
An engineer has integrated a new DMVPN to link remote offices across the internet using Cisco IOS routers. When connecting to remote sites, pings and voice data appear to flow properly and all tunnel stats seem to show that are up. However, when trying to connect to a remote server using RDP, the connection fails. Which action resolves this issue?
A. Replace certificate on the RDP server.
B. Adjust the MTU size within the routers.
C. Add RDP port to the extended ACL.
D. Change DMVPN timeout values.
Answer: A
NEW QUESTION: 4
You manage a cloud service that has a web application named WebRole1.
WebRole1 writes error messages to the Windows Event Log.
Users report receiving an error page with the following message: "Event 26 has occurred.
Contact your system administrator."
You need to access the WebRole1 event log.
Which three actions should you perform? Each correct answer presents part of the solution.
A. Enable verbose monitoring.
B. Update the cloud service definition file and the service configuration file.
C. Update the WebRole1 web.config file.
D. Run the Enable-AzureWebsiteApplicationDiagnostic PowerShell cmdlet.
E. Create a storage account.
F. Run the Set-AzureVMDiagnosticsExtensionPowerShell cmdlet.
Answer: A,B,E
Explanation:
step 1 specify the scheduled TransferLogLevelFilter to Verbose in the diagnostics.wadcfg step 2 Update the cloud service definition file and the service configuration file (.cspkg) step 3 best practice is to create a separate storage account for logging diagnostics data
References: http://azure.microsoft.com/en-us/documentation/articles/cloud-services-how-to-monitor/
C. _65503.?$
D. _65503_
E. _65503$
F. 0
Answer: A
Explanation:
http://www.cisco.com/c/en/us/td/docs/ios/12_2/termserv/configuration/guide/ftersv_c/tcfaap re.html
NEW QUESTION: 3
An engineer has integrated a new DMVPN to link remote offices across the internet using Cisco IOS routers. When connecting to remote sites, pings and voice data appear to flow properly and all tunnel stats seem to show that are up. However, when trying to connect to a remote server using RDP, the connection fails. Which action resolves this issue?
A. Replace certificate on the RDP server.
B. Adjust the MTU size within the routers.
C. Add RDP port to the extended ACL.
D. Change DMVPN timeout values.
Answer: A
NEW QUESTION: 4
You manage a cloud service that has a web application named WebRole1.
WebRole1 writes error messages to the Windows Event Log.
Users report receiving an error page with the following message: "Event 26 has occurred.
Contact your system administrator."
You need to access the WebRole1 event log.
Which three actions should you perform? Each correct answer presents part of the solution.
A. Enable verbose monitoring.
B. Update the cloud service definition file and the service configuration file.
C. Update the WebRole1 web.config file.
D. Run the Enable-AzureWebsiteApplicationDiagnostic PowerShell cmdlet.
E. Create a storage account.
F. Run the Set-AzureVMDiagnosticsExtensionPowerShell cmdlet.
Answer: A,B,E
Explanation:
step 1 specify the scheduled TransferLogLevelFilter to Verbose in the diagnostics.wadcfg step 2 Update the cloud service definition file and the service configuration file (.cspkg) step 3 best practice is to create a separate storage account for logging diagnostics data
References: http://azure.microsoft.com/en-us/documentation/articles/cloud-services-how-to-monitor/
This is more than a C_SACP_2308 65503$
C. _65503.?$
D. _65503_
E. _65503$
F. 0
Answer: A
Explanation:
http://www.cisco.com/c/en/us/td/docs/ios/12_2/termserv/configuration/guide/ftersv_c/tcfaap re.html
NEW QUESTION: 3
An engineer has integrated a new DMVPN to link remote offices across the internet using Cisco IOS routers. When connecting to remote sites, pings and voice data appear to flow properly and all tunnel stats seem to show that are up. However, when trying to connect to a remote server using RDP, the connection fails. Which action resolves this issue?
A. Replace certificate on the RDP server.
B. Adjust the MTU size within the routers.
C. Add RDP port to the extended ACL.
D. Change DMVPN timeout values.
Answer: A
NEW QUESTION: 4
You manage a cloud service that has a web application named WebRole1.
WebRole1 writes error messages to the Windows Event Log.
Users report receiving an error page with the following message: "Event 26 has occurred.
Contact your system administrator."
You need to access the WebRole1 event log.
Which three actions should you perform? Each correct answer presents part of the solution.
A. Enable verbose monitoring.
B. Update the cloud service definition file and the service configuration file.
C. Update the WebRole1 web.config file.
D. Run the Enable-AzureWebsiteApplicationDiagnostic PowerShell cmdlet.
E. Create a storage account.
F. Run the Set-AzureVMDiagnosticsExtensionPowerShell cmdlet.
Answer: A,B,E
Explanation:
step 1 specify the scheduled TransferLogLevelFilter to Verbose in the diagnostics.wadcfg step 2 Update the cloud service definition file and the service configuration file (.cspkg) step 3 best practice is to create a separate storage account for logging diagnostics data
References: http://azure.microsoft.com/en-us/documentation/articles/cloud-services-how-to-monitor/
- CIPP-C Test Dump
- C-KYMD-01 New Soft Simulations
- ACP-01101 Interactive Practice Exam
- Terraform-Associate-003 Test Questions
- Study CTAL-TTA Demo
- 300-410 Reliable Test Pattern
- Demo HPE2-N69 Test
- New DOP-C02 Exam Dumps
- C-THR94-2311 Exam Test
- C_TB1200_10 Reliable Test Sims
- Exam Dumps MB-800 Collection
- ADX-201 Practice Engine
- Certification Professional-Cloud-Architect Test Answers
- New Exam C-THR88-2311 Braindumps
- Valid Test C-ARP2P-2308 Bootcamp
- H20-688_V1.0 Latest Test Questions
- CPHQ Valid Exam Voucher
- Exam Dumps 200-301 Pdf
- NCP-DB Detail Explanation
- Exam TDA-C01 Quiz
- Latest C-TBW50H-75 Learning Material
- D-PST-DY-23 Exam Engine
- D-DS-FN-23 Reliable Study Guide
- D-RP-DY-A-24 Valid Test Discount
C. _65503.?$
D. _65503_
E. _65503$
F. 0
Answer: A
Explanation:
http://www.cisco.com/c/en/us/td/docs/ios/12_2/termserv/configuration/guide/ftersv_c/tcfaap re.html
NEW QUESTION: 3
An engineer has integrated a new DMVPN to link remote offices across the internet using Cisco IOS routers. When connecting to remote sites, pings and voice data appear to flow properly and all tunnel stats seem to show that are up. However, when trying to connect to a remote server using RDP, the connection fails. Which action resolves this issue?
A. Replace certificate on the RDP server.
B. Adjust the MTU size within the routers.
C. Add RDP port to the extended ACL.
D. Change DMVPN timeout values.
Answer: A
NEW QUESTION: 4
You manage a cloud service that has a web application named WebRole1.
WebRole1 writes error messages to the Windows Event Log.
Users report receiving an error page with the following message: "Event 26 has occurred.
Contact your system administrator."
You need to access the WebRole1 event log.
Which three actions should you perform? Each correct answer presents part of the solution.
A. Enable verbose monitoring.
B. Update the cloud service definition file and the service configuration file.
C. Update the WebRole1 web.config file.
D. Run the Enable-AzureWebsiteApplicationDiagnostic PowerShell cmdlet.
E. Create a storage account.
F. Run the Set-AzureVMDiagnosticsExtensionPowerShell cmdlet.
Answer: A,B,E
Explanation:
step 1 specify the scheduled TransferLogLevelFilter to Verbose in the diagnostics.wadcfg step 2 Update the cloud service definition file and the service configuration file (.cspkg) step 3 best practice is to create a separate storage account for logging diagnostics data
References: http://azure.microsoft.com/en-us/documentation/articles/cloud-services-how-to-monitor/
C. _65503.?$
D. _65503_
E. _65503$
F. 0
Answer: A
Explanation:
http://www.cisco.com/c/en/us/td/docs/ios/12_2/termserv/configuration/guide/ftersv_c/tcfaap re.html
NEW QUESTION: 3
An engineer has integrated a new DMVPN to link remote offices across the internet using Cisco IOS routers. When connecting to remote sites, pings and voice data appear to flow properly and all tunnel stats seem to show that are up. However, when trying to connect to a remote server using RDP, the connection fails. Which action resolves this issue?
A. Replace certificate on the RDP server.
B. Adjust the MTU size within the routers.
C. Add RDP port to the extended ACL.
D. Change DMVPN timeout values.
Answer: A
NEW QUESTION: 4
You manage a cloud service that has a web application named WebRole1.
WebRole1 writes error messages to the Windows Event Log.
Users report receiving an error page with the following message: "Event 26 has occurred.
Contact your system administrator."
You need to access the WebRole1 event log.
Which three actions should you perform? Each correct answer presents part of the solution.
A. Enable verbose monitoring.
B. Update the cloud service definition file and the service configuration file.
C. Update the WebRole1 web.config file.
D. Run the Enable-AzureWebsiteApplicationDiagnostic PowerShell cmdlet.
E. Create a storage account.
F. Run the Set-AzureVMDiagnosticsExtensionPowerShell cmdlet.
Answer: A,B,E
Explanation:
step 1 specify the scheduled TransferLogLevelFilter to Verbose in the diagnostics.wadcfg step 2 Update the cloud service definition file and the service configuration file (.cspkg) step 3 best practice is to create a separate storage account for logging diagnostics data
References: http://azure.microsoft.com/en-us/documentation/articles/cloud-services-how-to-monitor/
SAP C_SACP_2308 Simulations Pdf It will only take you 1-2 days to finish the dumps VCE pdf and recite them before the exam, Our experts have distilled the crucial points of the exam into our C_SACP_2308 training materials by integrating all useful content into them, SAP C_SACP_2308 Simulations Pdf Just try and you will love them, SAP C_SACP_2308 Simulations Pdf Well begun is half done.
Executives need to spend just a few days in the trenches with their technical https://troytec.validtorrent.com/C_SACP_2308-valid-exam-torrent.html staff to get the true picture, Downloading and Installing Turbo Lister, When you're ready to get started, click one of those links.
Our C_SACP_2308 certification training materials will be a good option for you, Touch to close the camera settings, The List Interface, In order to focus a depth map around Detailed 1z0-1109-23 Study Plan an appropriate area, you may choose to use spotlights instead of a directional light.
This may, in turn, increase the consumer appetite for complex products Simulations C_SACP_2308 Pdf that have the above three elements, Then she cranked up the volume on the viewport and laughed as everyone's speakers screamed with feedback.
When teams are staffed with quality over quantity in mind, they https://pass4sure.itexamdownload.com/C_SACP_2308-valid-questions.html can be both skilled and lean, Open the manifest.xml file, As a result, the program will continue when a null is encountered.
High Hit-Rate SAP - C_SACP_2308 - SAP Certified Application Associate - SAP Analytics Cloud: Planning Simulations Pdf
Grounded, ground loop, One or more of the frames may contain a tiny, tiny scroll Simulations C_SACP_2308 Pdf bar at the top, It is difficult to get the attention of review sites because so many developers are requesting reviews, but you should still submit to them.
The Design Method will teach you a proven, repeatable process for AWS-Security-Specialty Valid Dumps Ebook solving visual communication problems, It will only take you 1-2 days to finish the dumps VCE pdf and recite them before the exam.
Our experts have distilled the crucial points of the exam into our C_SACP_2308 training materials by integrating all useful content into them, Just try and you will love them.
Well begun is half done, Besides, the C_SACP_2308 free demo must be the best reference for your assessment, Just think that, you only need to spend some money, you can get a certificate as well as improve your ability.
It’s a critical question for you, Come and buy our C_SACP_2308 exam materials, you will get more than you can imagine, The content of the C_SACP_2308 training guide is the real questions and Latest C_SAC_2402 Braindumps Questions answers which are always kept to be the latest according to the efforts of the professionals.
C_SACP_2308 Simulations Pdf | High Pass-Rate C_SACP_2308 Latest Braindumps Questions: SAP Certified Application Associate - SAP Analytics Cloud: Planning
However, with the help of the best training materials, you can completely pass SAP C_SACP_2308 test in a short period of time, Especially those who study while working, you can save a lot of time easily.
Using Ce-Isareti can quickly help you get the NSE4_FGT-7.2 Reliable Test Cost certificate you want, Every subtle change in the mainstream of the knowledge about the C_SACP_2308 certification will be caught and we try our best to search the C_SACP_2308 study materials resources available to us.
Passing C_SACP_2308 can be hard, and you won’t find such exam C_SACP_2308 brain dumps anywhere, We are professional and authoritative exam dumps seller in this field.
Our website is a professional certification dumps provider that offer candidates SAP C_SACP_2308 valid vce and C_SACP_2308 exam pdf for achieving success in an effective way in the C_SACP_2308 valid exam.
NEW QUESTION: 1
Which three are advantages of the Java exception mechanism?
A. Improves the program structure because the error handling code is separated from the normal program function
B. Improves the program structure because the programmer can choose where to handle exceptions
C. Improves the program structure because exceptions must be handled in the method in which they occurred
D. Provides a set of standard exceptions that covers all the possible errors
E. Allows the creation of new exceptions that are tailored to the particular program being created
Answer: A,B,E
Explanation:
B is false. Standard exceptions not cover all possible errors. D is false. Exceptions don't have to be handled in the method in which they occurred.
NEW QUESTION: 2
Which as-path access-list regular expression should be applied on R2 as a neighbor filter list to only allow updates with an origin of AS 65503?
Refer to the exhibit.
A.
What will you get with your purchase of the Unlimited Access Package for only $149.00?
- An overview of the C_SACP_2308 65503$
C. _65503.?$
D. _65503_
E. _65503$
F. 0
Answer: A
Explanation:
http://www.cisco.com/c/en/us/td/docs/ios/12_2/termserv/configuration/guide/ftersv_c/tcfaap re.htmlNEW QUESTION: 3
An engineer has integrated a new DMVPN to link remote offices across the internet using Cisco IOS routers. When connecting to remote sites, pings and voice data appear to flow properly and all tunnel stats seem to show that are up. However, when trying to connect to a remote server using RDP, the connection fails. Which action resolves this issue?
A. Replace certificate on the RDP server.
B. Adjust the MTU size within the routers.
C. Add RDP port to the extended ACL.
D. Change DMVPN timeout values.
Answer: ANEW QUESTION: 4
course through studying the questions and answers.
You manage a cloud service that has a web application named WebRole1.
WebRole1 writes error messages to the Windows Event Log.
Users report receiving an error page with the following message: "Event 26 has occurred.
Contact your system administrator."
You need to access the WebRole1 event log.
Which three actions should you perform? Each correct answer presents part of the solution.
A. Enable verbose monitoring.
B. Update the cloud service definition file and the service configuration file.
C. Update the WebRole1 web.config file.
D. Run the Enable-AzureWebsiteApplicationDiagnostic PowerShell cmdlet.
E. Create a storage account.
F. Run the Set-AzureVMDiagnosticsExtensionPowerShell cmdlet.
Answer: A,B,E
Explanation:
step 1 specify the scheduled TransferLogLevelFilter to Verbose in the diagnostics.wadcfg step 2 Update the cloud service definition file and the service configuration file (.cspkg) step 3 best practice is to create a separate storage account for logging diagnostics data
References: http://azure.microsoft.com/en-us/documentation/articles/cloud-services-how-to-monitor/ - A preview of actual C_SACP_2308 65503$
C. _65503.?$
D. _65503_
E. _65503$
F. 0
Answer: A
Explanation:
http://www.cisco.com/c/en/us/td/docs/ios/12_2/termserv/configuration/guide/ftersv_c/tcfaap re.htmlNEW QUESTION: 3
An engineer has integrated a new DMVPN to link remote offices across the internet using Cisco IOS routers. When connecting to remote sites, pings and voice data appear to flow properly and all tunnel stats seem to show that are up. However, when trying to connect to a remote server using RDP, the connection fails. Which action resolves this issue?
A. Replace certificate on the RDP server.
B. Adjust the MTU size within the routers.
C. Add RDP port to the extended ACL.
D. Change DMVPN timeout values.
Answer: ANEW QUESTION: 4
test questions
You manage a cloud service that has a web application named WebRole1.
WebRole1 writes error messages to the Windows Event Log.
Users report receiving an error page with the following message: "Event 26 has occurred.
Contact your system administrator."
You need to access the WebRole1 event log.
Which three actions should you perform? Each correct answer presents part of the solution.
A. Enable verbose monitoring.
B. Update the cloud service definition file and the service configuration file.
C. Update the WebRole1 web.config file.
D. Run the Enable-AzureWebsiteApplicationDiagnostic PowerShell cmdlet.
E. Create a storage account.
F. Run the Set-AzureVMDiagnosticsExtensionPowerShell cmdlet.
Answer: A,B,E
Explanation:
step 1 specify the scheduled TransferLogLevelFilter to Verbose in the diagnostics.wadcfg step 2 Update the cloud service definition file and the service configuration file (.cspkg) step 3 best practice is to create a separate storage account for logging diagnostics data
References: http://azure.microsoft.com/en-us/documentation/articles/cloud-services-how-to-monitor/ - Actual correct C_SACP_2308 65503$
C. _65503.?$
D. _65503_
E. _65503$
F. 0
Answer: A
Explanation:
http://www.cisco.com/c/en/us/td/docs/ios/12_2/termserv/configuration/guide/ftersv_c/tcfaap re.htmlNEW QUESTION: 3
An engineer has integrated a new DMVPN to link remote offices across the internet using Cisco IOS routers. When connecting to remote sites, pings and voice data appear to flow properly and all tunnel stats seem to show that are up. However, when trying to connect to a remote server using RDP, the connection fails. Which action resolves this issue?
A. Replace certificate on the RDP server.
B. Adjust the MTU size within the routers.
C. Add RDP port to the extended ACL.
D. Change DMVPN timeout values.
Answer: ANEW QUESTION: 4
answers to the latest 65503$
You manage a cloud service that has a web application named WebRole1.
WebRole1 writes error messages to the Windows Event Log.
Users report receiving an error page with the following message: "Event 26 has occurred.
Contact your system administrator."
You need to access the WebRole1 event log.
Which three actions should you perform? Each correct answer presents part of the solution.
A. Enable verbose monitoring.
B. Update the cloud service definition file and the service configuration file.
C. Update the WebRole1 web.config file.
D. Run the Enable-AzureWebsiteApplicationDiagnostic PowerShell cmdlet.
E. Create a storage account.
F. Run the Set-AzureVMDiagnosticsExtensionPowerShell cmdlet.
Answer: A,B,E
Explanation:
step 1 specify the scheduled TransferLogLevelFilter to Verbose in the diagnostics.wadcfg step 2 Update the cloud service definition file and the service configuration file (.cspkg) step 3 best practice is to create a separate storage account for logging diagnostics data
References: http://azure.microsoft.com/en-us/documentation/articles/cloud-services-how-to-monitor/
C. _65503.?$
D. _65503_
E. _65503$
F. 0
Answer: A
Explanation:
http://www.cisco.com/c/en/us/td/docs/ios/12_2/termserv/configuration/guide/ftersv_c/tcfaap re.htmlNEW QUESTION: 3
An engineer has integrated a new DMVPN to link remote offices across the internet using Cisco IOS routers. When connecting to remote sites, pings and voice data appear to flow properly and all tunnel stats seem to show that are up. However, when trying to connect to a remote server using RDP, the connection fails. Which action resolves this issue?
A. Replace certificate on the RDP server.
B. Adjust the MTU size within the routers.
C. Add RDP port to the extended ACL.
D. Change DMVPN timeout values.
Answer: ANEW QUESTION: 4
questions
You manage a cloud service that has a web application named WebRole1.
WebRole1 writes error messages to the Windows Event Log.
Users report receiving an error page with the following message: "Event 26 has occurred.
Contact your system administrator."
You need to access the WebRole1 event log.
Which three actions should you perform? Each correct answer presents part of the solution.
A. Enable verbose monitoring.
B. Update the cloud service definition file and the service configuration file.
C. Update the WebRole1 web.config file.
D. Run the Enable-AzureWebsiteApplicationDiagnostic PowerShell cmdlet.
E. Create a storage account.
F. Run the Set-AzureVMDiagnosticsExtensionPowerShell cmdlet.
Answer: A,B,E
Explanation:
step 1 specify the scheduled TransferLogLevelFilter to Verbose in the diagnostics.wadcfg step 2 Update the cloud service definition file and the service configuration file (.cspkg) step 3 best practice is to create a separate storage account for logging diagnostics data
References: http://azure.microsoft.com/en-us/documentation/articles/cloud-services-how-to-monitor/
Our Unlimited Access Package will prepare you for your exam with guaranteed results, surpassing other C_SACP_2308 65503$
C. _65503.?$
D. _65503_
E. _65503$
F. 0
Answer: A
Explanation:
http://www.cisco.com/c/en/us/td/docs/ios/12_2/termserv/configuration/guide/ftersv_c/tcfaap re.html
NEW QUESTION: 3
An engineer has integrated a new DMVPN to link remote offices across the internet using Cisco IOS routers. When connecting to remote sites, pings and voice data appear to flow properly and all tunnel stats seem to show that are up. However, when trying to connect to a remote server using RDP, the connection fails. Which action resolves this issue?
A. Replace certificate on the RDP server.
B. Adjust the MTU size within the routers.
C. Add RDP port to the extended ACL.
D. Change DMVPN timeout values.
Answer: A
NEW QUESTION: 4
You manage a cloud service that has a web application named WebRole1.
WebRole1 writes error messages to the Windows Event Log.
Users report receiving an error page with the following message: "Event 26 has occurred.
Contact your system administrator."
You need to access the WebRole1 event log.
Which three actions should you perform? Each correct answer presents part of the solution.
A. Enable verbose monitoring.
B. Update the cloud service definition file and the service configuration file.
C. Update the WebRole1 web.config file.
D. Run the Enable-AzureWebsiteApplicationDiagnostic PowerShell cmdlet.
E. Create a storage account.
F. Run the Set-AzureVMDiagnosticsExtensionPowerShell cmdlet.
Answer: A,B,E
Explanation:
step 1 specify the scheduled TransferLogLevelFilter to Verbose in the diagnostics.wadcfg step 2 Update the cloud service definition file and the service configuration file (.cspkg) step 3 best practice is to create a separate storage account for logging diagnostics data
References: http://azure.microsoft.com/en-us/documentation/articles/cloud-services-how-to-monitor/
C. _65503.?$
D. _65503_
E. _65503$
F. 0
Answer: A
Explanation:
http://www.cisco.com/c/en/us/td/docs/ios/12_2/termserv/configuration/guide/ftersv_c/tcfaap re.html
NEW QUESTION: 3
An engineer has integrated a new DMVPN to link remote offices across the internet using Cisco IOS routers. When connecting to remote sites, pings and voice data appear to flow properly and all tunnel stats seem to show that are up. However, when trying to connect to a remote server using RDP, the connection fails. Which action resolves this issue?
A. Replace certificate on the RDP server.
B. Adjust the MTU size within the routers.
C. Add RDP port to the extended ACL.
D. Change DMVPN timeout values.
Answer: A
NEW QUESTION: 4
You manage a cloud service that has a web application named WebRole1.
WebRole1 writes error messages to the Windows Event Log.
Users report receiving an error page with the following message: "Event 26 has occurred.
Contact your system administrator."
You need to access the WebRole1 event log.
Which three actions should you perform? Each correct answer presents part of the solution.
A. Enable verbose monitoring.
B. Update the cloud service definition file and the service configuration file.
C. Update the WebRole1 web.config file.
D. Run the Enable-AzureWebsiteApplicationDiagnostic PowerShell cmdlet.
E. Create a storage account.
F. Run the Set-AzureVMDiagnosticsExtensionPowerShell cmdlet.
Answer: A,B,E
Explanation:
step 1 specify the scheduled TransferLogLevelFilter to Verbose in the diagnostics.wadcfg step 2 Update the cloud service definition file and the service configuration file (.cspkg) step 3 best practice is to create a separate storage account for logging diagnostics data
References: http://azure.microsoft.com/en-us/documentation/articles/cloud-services-how-to-monitor/
C. _65503.?$
D. _65503_
E. _65503$
F. 0
Answer: A
Explanation:
http://www.cisco.com/c/en/us/td/docs/ios/12_2/termserv/configuration/guide/ftersv_c/tcfaap re.html
NEW QUESTION: 3
An engineer has integrated a new DMVPN to link remote offices across the internet using Cisco IOS routers. When connecting to remote sites, pings and voice data appear to flow properly and all tunnel stats seem to show that are up. However, when trying to connect to a remote server using RDP, the connection fails. Which action resolves this issue?
A. Replace certificate on the RDP server.
B. Adjust the MTU size within the routers.
C. Add RDP port to the extended ACL.
D. Change DMVPN timeout values.
Answer: A
NEW QUESTION: 4
You manage a cloud service that has a web application named WebRole1.
WebRole1 writes error messages to the Windows Event Log.
Users report receiving an error page with the following message: "Event 26 has occurred.
Contact your system administrator."
You need to access the WebRole1 event log.
Which three actions should you perform? Each correct answer presents part of the solution.
A. Enable verbose monitoring.
B. Update the cloud service definition file and the service configuration file.
C. Update the WebRole1 web.config file.
D. Run the Enable-AzureWebsiteApplicationDiagnostic PowerShell cmdlet.
E. Create a storage account.
F. Run the Set-AzureVMDiagnosticsExtensionPowerShell cmdlet.
Answer: A,B,E
Explanation:
step 1 specify the scheduled TransferLogLevelFilter to Verbose in the diagnostics.wadcfg step 2 Update the cloud service definition file and the service configuration file (.cspkg) step 3 best practice is to create a separate storage account for logging diagnostics data
References: http://azure.microsoft.com/en-us/documentation/articles/cloud-services-how-to-monitor/
C. _65503.?$
D. _65503_
E. _65503$
F. 0
Answer: A
Explanation:
http://www.cisco.com/c/en/us/td/docs/ios/12_2/termserv/configuration/guide/ftersv_c/tcfaap re.html
NEW QUESTION: 3
An engineer has integrated a new DMVPN to link remote offices across the internet using Cisco IOS routers. When connecting to remote sites, pings and voice data appear to flow properly and all tunnel stats seem to show that are up. However, when trying to connect to a remote server using RDP, the connection fails. Which action resolves this issue?
A. Replace certificate on the RDP server.
B. Adjust the MTU size within the routers.
C. Add RDP port to the extended ACL.
D. Change DMVPN timeout values.
Answer: A
NEW QUESTION: 4
You manage a cloud service that has a web application named WebRole1.
WebRole1 writes error messages to the Windows Event Log.
Users report receiving an error page with the following message: "Event 26 has occurred.
Contact your system administrator."
You need to access the WebRole1 event log.
Which three actions should you perform? Each correct answer presents part of the solution.
A. Enable verbose monitoring.
B. Update the cloud service definition file and the service configuration file.
C. Update the WebRole1 web.config file.
D. Run the Enable-AzureWebsiteApplicationDiagnostic PowerShell cmdlet.
E. Create a storage account.
F. Run the Set-AzureVMDiagnosticsExtensionPowerShell cmdlet.
Answer: A,B,E
Explanation:
step 1 specify the scheduled TransferLogLevelFilter to Verbose in the diagnostics.wadcfg step 2 Update the cloud service definition file and the service configuration file (.cspkg) step 3 best practice is to create a separate storage account for logging diagnostics data
References: http://azure.microsoft.com/en-us/documentation/articles/cloud-services-how-to-monitor/
C. _65503.?$
D. _65503_
E. _65503$
F. 0
Answer: A
Explanation:
http://www.cisco.com/c/en/us/td/docs/ios/12_2/termserv/configuration/guide/ftersv_c/tcfaap re.html
NEW QUESTION: 3
An engineer has integrated a new DMVPN to link remote offices across the internet using Cisco IOS routers. When connecting to remote sites, pings and voice data appear to flow properly and all tunnel stats seem to show that are up. However, when trying to connect to a remote server using RDP, the connection fails. Which action resolves this issue?
A. Replace certificate on the RDP server.
B. Adjust the MTU size within the routers.
C. Add RDP port to the extended ACL.
D. Change DMVPN timeout values.
Answer: A
NEW QUESTION: 4
You manage a cloud service that has a web application named WebRole1.
WebRole1 writes error messages to the Windows Event Log.
Users report receiving an error page with the following message: "Event 26 has occurred.
Contact your system administrator."
You need to access the WebRole1 event log.
Which three actions should you perform? Each correct answer presents part of the solution.
A. Enable verbose monitoring.
B. Update the cloud service definition file and the service configuration file.
C. Update the WebRole1 web.config file.
D. Run the Enable-AzureWebsiteApplicationDiagnostic PowerShell cmdlet.
E. Create a storage account.
F. Run the Set-AzureVMDiagnosticsExtensionPowerShell cmdlet.
Answer: A,B,E
Explanation:
step 1 specify the scheduled TransferLogLevelFilter to Verbose in the diagnostics.wadcfg step 2 Update the cloud service definition file and the service configuration file (.cspkg) step 3 best practice is to create a separate storage account for logging diagnostics data
References: http://azure.microsoft.com/en-us/documentation/articles/cloud-services-how-to-monitor/
C. _65503.?$
D. _65503_
E. _65503$
F. 0
Answer: A
Explanation:
http://www.cisco.com/c/en/us/td/docs/ios/12_2/termserv/configuration/guide/ftersv_c/tcfaap re.html
NEW QUESTION: 3
An engineer has integrated a new DMVPN to link remote offices across the internet using Cisco IOS routers. When connecting to remote sites, pings and voice data appear to flow properly and all tunnel stats seem to show that are up. However, when trying to connect to a remote server using RDP, the connection fails. Which action resolves this issue?
A. Replace certificate on the RDP server.
B. Adjust the MTU size within the routers.
C. Add RDP port to the extended ACL.
D. Change DMVPN timeout values.
Answer: A
NEW QUESTION: 4
You manage a cloud service that has a web application named WebRole1.
WebRole1 writes error messages to the Windows Event Log.
Users report receiving an error page with the following message: "Event 26 has occurred.
Contact your system administrator."
You need to access the WebRole1 event log.
Which three actions should you perform? Each correct answer presents part of the solution.
A. Enable verbose monitoring.
B. Update the cloud service definition file and the service configuration file.
C. Update the WebRole1 web.config file.
D. Run the Enable-AzureWebsiteApplicationDiagnostic PowerShell cmdlet.
E. Create a storage account.
F. Run the Set-AzureVMDiagnosticsExtensionPowerShell cmdlet.
Answer: A,B,E
Explanation:
step 1 specify the scheduled TransferLogLevelFilter to Verbose in the diagnostics.wadcfg step 2 Update the cloud service definition file and the service configuration file (.cspkg) step 3 best practice is to create a separate storage account for logging diagnostics data
References: http://azure.microsoft.com/en-us/documentation/articles/cloud-services-how-to-monitor/
Skip all the worthless C_SACP_2308 65503$
C. _65503.?$
D. _65503_
E. _65503$
F. 0
Answer: A
Explanation:
http://www.cisco.com/c/en/us/td/docs/ios/12_2/termserv/configuration/guide/ftersv_c/tcfaap re.html
NEW QUESTION: 3
An engineer has integrated a new DMVPN to link remote offices across the internet using Cisco IOS routers. When connecting to remote sites, pings and voice data appear to flow properly and all tunnel stats seem to show that are up. However, when trying to connect to a remote server using RDP, the connection fails. Which action resolves this issue?
A. Replace certificate on the RDP server.
B. Adjust the MTU size within the routers.
C. Add RDP port to the extended ACL.
D. Change DMVPN timeout values.
Answer: A
NEW QUESTION: 4
You manage a cloud service that has a web application named WebRole1.
WebRole1 writes error messages to the Windows Event Log.
Users report receiving an error page with the following message: "Event 26 has occurred.
Contact your system administrator."
You need to access the WebRole1 event log.
Which three actions should you perform? Each correct answer presents part of the solution.
A. Enable verbose monitoring.
B. Update the cloud service definition file and the service configuration file.
C. Update the WebRole1 web.config file.
D. Run the Enable-AzureWebsiteApplicationDiagnostic PowerShell cmdlet.
E. Create a storage account.
F. Run the Set-AzureVMDiagnosticsExtensionPowerShell cmdlet.
Answer: A,B,E
Explanation:
step 1 specify the scheduled TransferLogLevelFilter to Verbose in the diagnostics.wadcfg step 2 Update the cloud service definition file and the service configuration file (.cspkg) step 3 best practice is to create a separate storage account for logging diagnostics data
References: http://azure.microsoft.com/en-us/documentation/articles/cloud-services-how-to-monitor/
- CIPP-C Test Dump
- C-KYMD-01 New Soft Simulations
- ACP-01101 Interactive Practice Exam
- Terraform-Associate-003 Test Questions
- Study CTAL-TTA Demo
- 300-410 Reliable Test Pattern
- Demo HPE2-N69 Test
- New DOP-C02 Exam Dumps
- C-THR94-2311 Exam Test
- C_TB1200_10 Reliable Test Sims
- Exam Dumps MB-800 Collection
- ADX-201 Practice Engine
- Certification Professional-Cloud-Architect Test Answers
- New Exam C-THR88-2311 Braindumps
- Valid Test C-ARP2P-2308 Bootcamp
- H20-688_V1.0 Latest Test Questions
- CPHQ Valid Exam Voucher
- Exam Dumps 200-301 Pdf
- NCP-DB Detail Explanation
- Exam TDA-C01 Quiz
- Latest C-TBW50H-75 Learning Material
- D-PST-DY-23 Exam Engine
- D-DS-FN-23 Reliable Study Guide
- D-RP-DY-A-24 Valid Test Discount
65503$
C. _65503.?$
D. _65503_
E. _65503$
F. 0
Answer: A
Explanation:
http://www.cisco.com/c/en/us/td/docs/ios/12_2/termserv/configuration/guide/ftersv_c/tcfaap re.html
NEW QUESTION: 3
An engineer has integrated a new DMVPN to link remote offices across the internet using Cisco IOS routers. When connecting to remote sites, pings and voice data appear to flow properly and all tunnel stats seem to show that are up. However, when trying to connect to a remote server using RDP, the connection fails. Which action resolves this issue?
A. Replace certificate on the RDP server.
B. Adjust the MTU size within the routers.
C. Add RDP port to the extended ACL.
D. Change DMVPN timeout values.
Answer: A
NEW QUESTION: 4
You manage a cloud service that has a web application named WebRole1.
WebRole1 writes error messages to the Windows Event Log.
Users report receiving an error page with the following message: "Event 26 has occurred.
Contact your system administrator."
You need to access the WebRole1 event log.
Which three actions should you perform? Each correct answer presents part of the solution.
A. Enable verbose monitoring.
B. Update the cloud service definition file and the service configuration file.
C. Update the WebRole1 web.config file.
D. Run the Enable-AzureWebsiteApplicationDiagnostic PowerShell cmdlet.
E. Create a storage account.
F. Run the Set-AzureVMDiagnosticsExtensionPowerShell cmdlet.
Answer: A,B,E
Explanation:
step 1 specify the scheduled TransferLogLevelFilter to Verbose in the diagnostics.wadcfg step 2 Update the cloud service definition file and the service configuration file (.cspkg) step 3 best practice is to create a separate storage account for logging diagnostics data
References: http://azure.microsoft.com/en-us/documentation/articles/cloud-services-how-to-monitor/
Difficulty finding the right C_SACP_2308 65503$
C. _65503.?$
D. _65503_
E. _65503$
F. 0
Answer: A
Explanation:
http://www.cisco.com/c/en/us/td/docs/ios/12_2/termserv/configuration/guide/ftersv_c/tcfaap re.html
NEW QUESTION: 3
An engineer has integrated a new DMVPN to link remote offices across the internet using Cisco IOS routers. When connecting to remote sites, pings and voice data appear to flow properly and all tunnel stats seem to show that are up. However, when trying to connect to a remote server using RDP, the connection fails. Which action resolves this issue?
A. Replace certificate on the RDP server.
B. Adjust the MTU size within the routers.
C. Add RDP port to the extended ACL.
D. Change DMVPN timeout values.
Answer: A
NEW QUESTION: 4
You manage a cloud service that has a web application named WebRole1.
WebRole1 writes error messages to the Windows Event Log.
Users report receiving an error page with the following message: "Event 26 has occurred.
Contact your system administrator."
You need to access the WebRole1 event log.
Which three actions should you perform? Each correct answer presents part of the solution.
A. Enable verbose monitoring.
B. Update the cloud service definition file and the service configuration file.
C. Update the WebRole1 web.config file.
D. Run the Enable-AzureWebsiteApplicationDiagnostic PowerShell cmdlet.
E. Create a storage account.
F. Run the Set-AzureVMDiagnosticsExtensionPowerShell cmdlet.
Answer: A,B,E
Explanation:
step 1 specify the scheduled TransferLogLevelFilter to Verbose in the diagnostics.wadcfg step 2 Update the cloud service definition file and the service configuration file (.cspkg) step 3 best practice is to create a separate storage account for logging diagnostics data
References: http://azure.microsoft.com/en-us/documentation/articles/cloud-services-how-to-monitor/
C. _65503.?$
D. _65503_
E. _65503$
F. 0
Answer: A
Explanation:
http://www.cisco.com/c/en/us/td/docs/ios/12_2/termserv/configuration/guide/ftersv_c/tcfaap re.html
NEW QUESTION: 3
An engineer has integrated a new DMVPN to link remote offices across the internet using Cisco IOS routers. When connecting to remote sites, pings and voice data appear to flow properly and all tunnel stats seem to show that are up. However, when trying to connect to a remote server using RDP, the connection fails. Which action resolves this issue?
A. Replace certificate on the RDP server.
B. Adjust the MTU size within the routers.
C. Add RDP port to the extended ACL.
D. Change DMVPN timeout values.
Answer: A
NEW QUESTION: 4
You manage a cloud service that has a web application named WebRole1.
WebRole1 writes error messages to the Windows Event Log.
Users report receiving an error page with the following message: "Event 26 has occurred.
Contact your system administrator."
You need to access the WebRole1 event log.
Which three actions should you perform? Each correct answer presents part of the solution.
A. Enable verbose monitoring.
B. Update the cloud service definition file and the service configuration file.
C. Update the WebRole1 web.config file.
D. Run the Enable-AzureWebsiteApplicationDiagnostic PowerShell cmdlet.
E. Create a storage account.
F. Run the Set-AzureVMDiagnosticsExtensionPowerShell cmdlet.
Answer: A,B,E
Explanation:
step 1 specify the scheduled TransferLogLevelFilter to Verbose in the diagnostics.wadcfg step 2 Update the cloud service definition file and the service configuration file (.cspkg) step 3 best practice is to create a separate storage account for logging diagnostics data
References: http://azure.microsoft.com/en-us/documentation/articles/cloud-services-how-to-monitor/
C. _65503.?$
D. _65503_
E. _65503$
F. 0
Answer: A
Explanation:
http://www.cisco.com/c/en/us/td/docs/ios/12_2/termserv/configuration/guide/ftersv_c/tcfaap re.html
NEW QUESTION: 3
An engineer has integrated a new DMVPN to link remote offices across the internet using Cisco IOS routers. When connecting to remote sites, pings and voice data appear to flow properly and all tunnel stats seem to show that are up. However, when trying to connect to a remote server using RDP, the connection fails. Which action resolves this issue?
A. Replace certificate on the RDP server.
B. Adjust the MTU size within the routers.
C. Add RDP port to the extended ACL.
D. Change DMVPN timeout values.
Answer: A
NEW QUESTION: 4
You manage a cloud service that has a web application named WebRole1.
WebRole1 writes error messages to the Windows Event Log.
Users report receiving an error page with the following message: "Event 26 has occurred.
Contact your system administrator."
You need to access the WebRole1 event log.
Which three actions should you perform? Each correct answer presents part of the solution.
A. Enable verbose monitoring.
B. Update the cloud service definition file and the service configuration file.
C. Update the WebRole1 web.config file.
D. Run the Enable-AzureWebsiteApplicationDiagnostic PowerShell cmdlet.
E. Create a storage account.
F. Run the Set-AzureVMDiagnosticsExtensionPowerShell cmdlet.
Answer: A,B,E
Explanation:
step 1 specify the scheduled TransferLogLevelFilter to Verbose in the diagnostics.wadcfg step 2 Update the cloud service definition file and the service configuration file (.cspkg) step 3 best practice is to create a separate storage account for logging diagnostics data
References: http://azure.microsoft.com/en-us/documentation/articles/cloud-services-how-to-monitor/
C. _65503.?$
D. _65503_
E. _65503$
F. 0
Answer: A
Explanation:
http://www.cisco.com/c/en/us/td/docs/ios/12_2/termserv/configuration/guide/ftersv_c/tcfaap re.html
NEW QUESTION: 3
An engineer has integrated a new DMVPN to link remote offices across the internet using Cisco IOS routers. When connecting to remote sites, pings and voice data appear to flow properly and all tunnel stats seem to show that are up. However, when trying to connect to a remote server using RDP, the connection fails. Which action resolves this issue?
A. Replace certificate on the RDP server.
B. Adjust the MTU size within the routers.
C. Add RDP port to the extended ACL.
D. Change DMVPN timeout values.
Answer: A
NEW QUESTION: 4
You manage a cloud service that has a web application named WebRole1.
WebRole1 writes error messages to the Windows Event Log.
Users report receiving an error page with the following message: "Event 26 has occurred.
Contact your system administrator."
You need to access the WebRole1 event log.
Which three actions should you perform? Each correct answer presents part of the solution.
A. Enable verbose monitoring.
B. Update the cloud service definition file and the service configuration file.
C. Update the WebRole1 web.config file.
D. Run the Enable-AzureWebsiteApplicationDiagnostic PowerShell cmdlet.
E. Create a storage account.
F. Run the Set-AzureVMDiagnosticsExtensionPowerShell cmdlet.
Answer: A,B,E
Explanation:
step 1 specify the scheduled TransferLogLevelFilter to Verbose in the diagnostics.wadcfg step 2 Update the cloud service definition file and the service configuration file (.cspkg) step 3 best practice is to create a separate storage account for logging diagnostics data
References: http://azure.microsoft.com/en-us/documentation/articles/cloud-services-how-to-monitor/
- CIPP-C Test Dump
- C-KYMD-01 New Soft Simulations
- ACP-01101 Interactive Practice Exam
- Terraform-Associate-003 Test Questions
- Study CTAL-TTA Demo
- 300-410 Reliable Test Pattern
- Demo HPE2-N69 Test
- New DOP-C02 Exam Dumps
- C-THR94-2311 Exam Test
- C_TB1200_10 Reliable Test Sims
- Exam Dumps MB-800 Collection
- ADX-201 Practice Engine
- Certification Professional-Cloud-Architect Test Answers
- New Exam C-THR88-2311 Braindumps
- Valid Test C-ARP2P-2308 Bootcamp
- H20-688_V1.0 Latest Test Questions
- CPHQ Valid Exam Voucher
- Exam Dumps 200-301 Pdf
- NCP-DB Detail Explanation
- Exam TDA-C01 Quiz
- Latest C-TBW50H-75 Learning Material
- D-PST-DY-23 Exam Engine
- D-DS-FN-23 Reliable Study Guide
- D-RP-DY-A-24 Valid Test Discount
C. _65503.?$
D. _65503_
E. _65503$
F. 0
Answer: A
Explanation:
http://www.cisco.com/c/en/us/td/docs/ios/12_2/termserv/configuration/guide/ftersv_c/tcfaap re.html
NEW QUESTION: 3
An engineer has integrated a new DMVPN to link remote offices across the internet using Cisco IOS routers. When connecting to remote sites, pings and voice data appear to flow properly and all tunnel stats seem to show that are up. However, when trying to connect to a remote server using RDP, the connection fails. Which action resolves this issue?
A. Replace certificate on the RDP server.
B. Adjust the MTU size within the routers.
C. Add RDP port to the extended ACL.
D. Change DMVPN timeout values.
Answer: A
NEW QUESTION: 4
You manage a cloud service that has a web application named WebRole1.
WebRole1 writes error messages to the Windows Event Log.
Users report receiving an error page with the following message: "Event 26 has occurred.
Contact your system administrator."
You need to access the WebRole1 event log.
Which three actions should you perform? Each correct answer presents part of the solution.
A. Enable verbose monitoring.
B. Update the cloud service definition file and the service configuration file.
C. Update the WebRole1 web.config file.
D. Run the Enable-AzureWebsiteApplicationDiagnostic PowerShell cmdlet.
E. Create a storage account.
F. Run the Set-AzureVMDiagnosticsExtensionPowerShell cmdlet.
Answer: A,B,E
Explanation:
step 1 specify the scheduled TransferLogLevelFilter to Verbose in the diagnostics.wadcfg step 2 Update the cloud service definition file and the service configuration file (.cspkg) step 3 best practice is to create a separate storage account for logging diagnostics data
References: http://azure.microsoft.com/en-us/documentation/articles/cloud-services-how-to-monitor/
- CIPP-C Test Dump
- C-KYMD-01 New Soft Simulations
- ACP-01101 Interactive Practice Exam
- Terraform-Associate-003 Test Questions
- Study CTAL-TTA Demo
- 300-410 Reliable Test Pattern
- Demo HPE2-N69 Test
- New DOP-C02 Exam Dumps
- C-THR94-2311 Exam Test
- C_TB1200_10 Reliable Test Sims
- Exam Dumps MB-800 Collection
- ADX-201 Practice Engine
- Certification Professional-Cloud-Architect Test Answers
- New Exam C-THR88-2311 Braindumps
- Valid Test C-ARP2P-2308 Bootcamp
- H20-688_V1.0 Latest Test Questions
- CPHQ Valid Exam Voucher
- Exam Dumps 200-301 Pdf
- NCP-DB Detail Explanation
- Exam TDA-C01 Quiz
- Latest C-TBW50H-75 Learning Material
- D-PST-DY-23 Exam Engine
- D-DS-FN-23 Reliable Study Guide
- D-RP-DY-A-24 Valid Test Discount
C. _65503.?$
D. _65503_
E. _65503$
F. 0
Answer: A
Explanation:
http://www.cisco.com/c/en/us/td/docs/ios/12_2/termserv/configuration/guide/ftersv_c/tcfaap re.html
NEW QUESTION: 3
An engineer has integrated a new DMVPN to link remote offices across the internet using Cisco IOS routers. When connecting to remote sites, pings and voice data appear to flow properly and all tunnel stats seem to show that are up. However, when trying to connect to a remote server using RDP, the connection fails. Which action resolves this issue?
A. Replace certificate on the RDP server.
B. Adjust the MTU size within the routers.
C. Add RDP port to the extended ACL.
D. Change DMVPN timeout values.
Answer: A
NEW QUESTION: 4
You manage a cloud service that has a web application named WebRole1.
WebRole1 writes error messages to the Windows Event Log.
Users report receiving an error page with the following message: "Event 26 has occurred.
Contact your system administrator."
You need to access the WebRole1 event log.
Which three actions should you perform? Each correct answer presents part of the solution.
A. Enable verbose monitoring.
B. Update the cloud service definition file and the service configuration file.
C. Update the WebRole1 web.config file.
D. Run the Enable-AzureWebsiteApplicationDiagnostic PowerShell cmdlet.
E. Create a storage account.
F. Run the Set-AzureVMDiagnosticsExtensionPowerShell cmdlet.
Answer: A,B,E
Explanation:
step 1 specify the scheduled TransferLogLevelFilter to Verbose in the diagnostics.wadcfg step 2 Update the cloud service definition file and the service configuration file (.cspkg) step 3 best practice is to create a separate storage account for logging diagnostics data
References: http://azure.microsoft.com/en-us/documentation/articles/cloud-services-how-to-monitor/
C. _65503.?$
D. _65503_
E. _65503$
F. 0
Answer: A
Explanation:
http://www.cisco.com/c/en/us/td/docs/ios/12_2/termserv/configuration/guide/ftersv_c/tcfaap re.html
NEW QUESTION: 3
An engineer has integrated a new DMVPN to link remote offices across the internet using Cisco IOS routers. When connecting to remote sites, pings and voice data appear to flow properly and all tunnel stats seem to show that are up. However, when trying to connect to a remote server using RDP, the connection fails. Which action resolves this issue?
A. Replace certificate on the RDP server.
B. Adjust the MTU size within the routers.
C. Add RDP port to the extended ACL.
D. Change DMVPN timeout values.
Answer: A
NEW QUESTION: 4
You manage a cloud service that has a web application named WebRole1.
WebRole1 writes error messages to the Windows Event Log.
Users report receiving an error page with the following message: "Event 26 has occurred.
Contact your system administrator."
You need to access the WebRole1 event log.
Which three actions should you perform? Each correct answer presents part of the solution.
A. Enable verbose monitoring.
B. Update the cloud service definition file and the service configuration file.
C. Update the WebRole1 web.config file.
D. Run the Enable-AzureWebsiteApplicationDiagnostic PowerShell cmdlet.
E. Create a storage account.
F. Run the Set-AzureVMDiagnosticsExtensionPowerShell cmdlet.
Answer: A,B,E
Explanation:
step 1 specify the scheduled TransferLogLevelFilter to Verbose in the diagnostics.wadcfg step 2 Update the cloud service definition file and the service configuration file (.cspkg) step 3 best practice is to create a separate storage account for logging diagnostics data
References: http://azure.microsoft.com/en-us/documentation/articles/cloud-services-how-to-monitor/
C. _65503.?$
D. _65503_
E. _65503$
F. 0
Answer: A
Explanation:
http://www.cisco.com/c/en/us/td/docs/ios/12_2/termserv/configuration/guide/ftersv_c/tcfaap re.html
NEW QUESTION: 3
An engineer has integrated a new DMVPN to link remote offices across the internet using Cisco IOS routers. When connecting to remote sites, pings and voice data appear to flow properly and all tunnel stats seem to show that are up. However, when trying to connect to a remote server using RDP, the connection fails. Which action resolves this issue?
A. Replace certificate on the RDP server.
B. Adjust the MTU size within the routers.
C. Add RDP port to the extended ACL.
D. Change DMVPN timeout values.
Answer: A
NEW QUESTION: 4
You manage a cloud service that has a web application named WebRole1.
WebRole1 writes error messages to the Windows Event Log.
Users report receiving an error page with the following message: "Event 26 has occurred.
Contact your system administrator."
You need to access the WebRole1 event log.
Which three actions should you perform? Each correct answer presents part of the solution.
A. Enable verbose monitoring.
B. Update the cloud service definition file and the service configuration file.
C. Update the WebRole1 web.config file.
D. Run the Enable-AzureWebsiteApplicationDiagnostic PowerShell cmdlet.
E. Create a storage account.
F. Run the Set-AzureVMDiagnosticsExtensionPowerShell cmdlet.
Answer: A,B,E
Explanation:
step 1 specify the scheduled TransferLogLevelFilter to Verbose in the diagnostics.wadcfg step 2 Update the cloud service definition file and the service configuration file (.cspkg) step 3 best practice is to create a separate storage account for logging diagnostics data
References: http://azure.microsoft.com/en-us/documentation/articles/cloud-services-how-to-monitor/
65503$
C. _65503.?$
D. _65503_
E. _65503$
F. 0
Answer: A
Explanation:
http://www.cisco.com/c/en/us/td/docs/ios/12_2/termserv/configuration/guide/ftersv_c/tcfaap re.html
NEW QUESTION: 3
An engineer has integrated a new DMVPN to link remote offices across the internet using Cisco IOS routers. When connecting to remote sites, pings and voice data appear to flow properly and all tunnel stats seem to show that are up. However, when trying to connect to a remote server using RDP, the connection fails. Which action resolves this issue?
A. Replace certificate on the RDP server.
B. Adjust the MTU size within the routers.
C. Add RDP port to the extended ACL.
D. Change DMVPN timeout values.
Answer: A
NEW QUESTION: 4
You manage a cloud service that has a web application named WebRole1.
WebRole1 writes error messages to the Windows Event Log.
Users report receiving an error page with the following message: "Event 26 has occurred.
Contact your system administrator."
You need to access the WebRole1 event log.
Which three actions should you perform? Each correct answer presents part of the solution.
A. Enable verbose monitoring.
B. Update the cloud service definition file and the service configuration file.
C. Update the WebRole1 web.config file.
D. Run the Enable-AzureWebsiteApplicationDiagnostic PowerShell cmdlet.
E. Create a storage account.
F. Run the Set-AzureVMDiagnosticsExtensionPowerShell cmdlet.
Answer: A,B,E
Explanation:
step 1 specify the scheduled TransferLogLevelFilter to Verbose in the diagnostics.wadcfg step 2 Update the cloud service definition file and the service configuration file (.cspkg) step 3 best practice is to create a separate storage account for logging diagnostics data
References: http://azure.microsoft.com/en-us/documentation/articles/cloud-services-how-to-monitor/
Still searching for C_SACP_2308 65503$
C. _65503.?$
D. _65503_
E. _65503$
F. 0
Answer: A
Explanation:
http://www.cisco.com/c/en/us/td/docs/ios/12_2/termserv/configuration/guide/ftersv_c/tcfaap re.html
NEW QUESTION: 3
An engineer has integrated a new DMVPN to link remote offices across the internet using Cisco IOS routers. When connecting to remote sites, pings and voice data appear to flow properly and all tunnel stats seem to show that are up. However, when trying to connect to a remote server using RDP, the connection fails. Which action resolves this issue?
A. Replace certificate on the RDP server.
B. Adjust the MTU size within the routers.
C. Add RDP port to the extended ACL.
D. Change DMVPN timeout values.
Answer: A
NEW QUESTION: 4
You manage a cloud service that has a web application named WebRole1.
WebRole1 writes error messages to the Windows Event Log.
Users report receiving an error page with the following message: "Event 26 has occurred.
Contact your system administrator."
You need to access the WebRole1 event log.
Which three actions should you perform? Each correct answer presents part of the solution.
A. Enable verbose monitoring.
B. Update the cloud service definition file and the service configuration file.
C. Update the WebRole1 web.config file.
D. Run the Enable-AzureWebsiteApplicationDiagnostic PowerShell cmdlet.
E. Create a storage account.
F. Run the Set-AzureVMDiagnosticsExtensionPowerShell cmdlet.
Answer: A,B,E
Explanation:
step 1 specify the scheduled TransferLogLevelFilter to Verbose in the diagnostics.wadcfg step 2 Update the cloud service definition file and the service configuration file (.cspkg) step 3 best practice is to create a separate storage account for logging diagnostics data
References: http://azure.microsoft.com/en-us/documentation/articles/cloud-services-how-to-monitor/
C. _65503.?$
D. _65503_
E. _65503$
F. 0
Answer: A
Explanation:
http://www.cisco.com/c/en/us/td/docs/ios/12_2/termserv/configuration/guide/ftersv_c/tcfaap re.html
NEW QUESTION: 3
An engineer has integrated a new DMVPN to link remote offices across the internet using Cisco IOS routers. When connecting to remote sites, pings and voice data appear to flow properly and all tunnel stats seem to show that are up. However, when trying to connect to a remote server using RDP, the connection fails. Which action resolves this issue?
A. Replace certificate on the RDP server.
B. Adjust the MTU size within the routers.
C. Add RDP port to the extended ACL.
D. Change DMVPN timeout values.
Answer: A
NEW QUESTION: 4
You manage a cloud service that has a web application named WebRole1.
WebRole1 writes error messages to the Windows Event Log.
Users report receiving an error page with the following message: "Event 26 has occurred.
Contact your system administrator."
You need to access the WebRole1 event log.
Which three actions should you perform? Each correct answer presents part of the solution.
A. Enable verbose monitoring.
B. Update the cloud service definition file and the service configuration file.
C. Update the WebRole1 web.config file.
D. Run the Enable-AzureWebsiteApplicationDiagnostic PowerShell cmdlet.
E. Create a storage account.
F. Run the Set-AzureVMDiagnosticsExtensionPowerShell cmdlet.
Answer: A,B,E
Explanation:
step 1 specify the scheduled TransferLogLevelFilter to Verbose in the diagnostics.wadcfg step 2 Update the cloud service definition file and the service configuration file (.cspkg) step 3 best practice is to create a separate storage account for logging diagnostics data
References: http://azure.microsoft.com/en-us/documentation/articles/cloud-services-how-to-monitor/
C. _65503.?$
D. _65503_
E. _65503$
F. 0
Answer: A
Explanation:
http://www.cisco.com/c/en/us/td/docs/ios/12_2/termserv/configuration/guide/ftersv_c/tcfaap re.html
NEW QUESTION: 3
An engineer has integrated a new DMVPN to link remote offices across the internet using Cisco IOS routers. When connecting to remote sites, pings and voice data appear to flow properly and all tunnel stats seem to show that are up. However, when trying to connect to a remote server using RDP, the connection fails. Which action resolves this issue?
A. Replace certificate on the RDP server.
B. Adjust the MTU size within the routers.
C. Add RDP port to the extended ACL.
D. Change DMVPN timeout values.
Answer: A
NEW QUESTION: 4
You manage a cloud service that has a web application named WebRole1.
WebRole1 writes error messages to the Windows Event Log.
Users report receiving an error page with the following message: "Event 26 has occurred.
Contact your system administrator."
You need to access the WebRole1 event log.
Which three actions should you perform? Each correct answer presents part of the solution.
A. Enable verbose monitoring.
B. Update the cloud service definition file and the service configuration file.
C. Update the WebRole1 web.config file.
D. Run the Enable-AzureWebsiteApplicationDiagnostic PowerShell cmdlet.
E. Create a storage account.
F. Run the Set-AzureVMDiagnosticsExtensionPowerShell cmdlet.
Answer: A,B,E
Explanation:
step 1 specify the scheduled TransferLogLevelFilter to Verbose in the diagnostics.wadcfg step 2 Update the cloud service definition file and the service configuration file (.cspkg) step 3 best practice is to create a separate storage account for logging diagnostics data
References: http://azure.microsoft.com/en-us/documentation/articles/cloud-services-how-to-monitor/
C. _65503.?$
D. _65503_
E. _65503$
F. 0
Answer: A
Explanation:
http://www.cisco.com/c/en/us/td/docs/ios/12_2/termserv/configuration/guide/ftersv_c/tcfaap re.html
NEW QUESTION: 3
An engineer has integrated a new DMVPN to link remote offices across the internet using Cisco IOS routers. When connecting to remote sites, pings and voice data appear to flow properly and all tunnel stats seem to show that are up. However, when trying to connect to a remote server using RDP, the connection fails. Which action resolves this issue?
A. Replace certificate on the RDP server.
B. Adjust the MTU size within the routers.
C. Add RDP port to the extended ACL.
D. Change DMVPN timeout values.
Answer: A
NEW QUESTION: 4
You manage a cloud service that has a web application named WebRole1.
WebRole1 writes error messages to the Windows Event Log.
Users report receiving an error page with the following message: "Event 26 has occurred.
Contact your system administrator."
You need to access the WebRole1 event log.
Which three actions should you perform? Each correct answer presents part of the solution.
A. Enable verbose monitoring.
B. Update the cloud service definition file and the service configuration file.
C. Update the WebRole1 web.config file.
D. Run the Enable-AzureWebsiteApplicationDiagnostic PowerShell cmdlet.
E. Create a storage account.
F. Run the Set-AzureVMDiagnosticsExtensionPowerShell cmdlet.
Answer: A,B,E
Explanation:
step 1 specify the scheduled TransferLogLevelFilter to Verbose in the diagnostics.wadcfg step 2 Update the cloud service definition file and the service configuration file (.cspkg) step 3 best practice is to create a separate storage account for logging diagnostics data
References: http://azure.microsoft.com/en-us/documentation/articles/cloud-services-how-to-monitor/
C. _65503.?$
D. _65503_
E. _65503$
F. 0
Answer: A
Explanation:
http://www.cisco.com/c/en/us/td/docs/ios/12_2/termserv/configuration/guide/ftersv_c/tcfaap re.html
NEW QUESTION: 3
An engineer has integrated a new DMVPN to link remote offices across the internet using Cisco IOS routers. When connecting to remote sites, pings and voice data appear to flow properly and all tunnel stats seem to show that are up. However, when trying to connect to a remote server using RDP, the connection fails. Which action resolves this issue?
A. Replace certificate on the RDP server.
B. Adjust the MTU size within the routers.
C. Add RDP port to the extended ACL.
D. Change DMVPN timeout values.
Answer: A
NEW QUESTION: 4
You manage a cloud service that has a web application named WebRole1.
WebRole1 writes error messages to the Windows Event Log.
Users report receiving an error page with the following message: "Event 26 has occurred.
Contact your system administrator."
You need to access the WebRole1 event log.
Which three actions should you perform? Each correct answer presents part of the solution.
A. Enable verbose monitoring.
B. Update the cloud service definition file and the service configuration file.
C. Update the WebRole1 web.config file.
D. Run the Enable-AzureWebsiteApplicationDiagnostic PowerShell cmdlet.
E. Create a storage account.
F. Run the Set-AzureVMDiagnosticsExtensionPowerShell cmdlet.
Answer: A,B,E
Explanation:
step 1 specify the scheduled TransferLogLevelFilter to Verbose in the diagnostics.wadcfg step 2 Update the cloud service definition file and the service configuration file (.cspkg) step 3 best practice is to create a separate storage account for logging diagnostics data
References: http://azure.microsoft.com/en-us/documentation/articles/cloud-services-how-to-monitor/
C. _65503.?$
D. _65503_
E. _65503$
F. 0
Answer: A
Explanation:
http://www.cisco.com/c/en/us/td/docs/ios/12_2/termserv/configuration/guide/ftersv_c/tcfaap re.html
NEW QUESTION: 3
An engineer has integrated a new DMVPN to link remote offices across the internet using Cisco IOS routers. When connecting to remote sites, pings and voice data appear to flow properly and all tunnel stats seem to show that are up. However, when trying to connect to a remote server using RDP, the connection fails. Which action resolves this issue?
A. Replace certificate on the RDP server.
B. Adjust the MTU size within the routers.
C. Add RDP port to the extended ACL.
D. Change DMVPN timeout values.
Answer: A
NEW QUESTION: 4
You manage a cloud service that has a web application named WebRole1.
WebRole1 writes error messages to the Windows Event Log.
Users report receiving an error page with the following message: "Event 26 has occurred.
Contact your system administrator."
You need to access the WebRole1 event log.
Which three actions should you perform? Each correct answer presents part of the solution.
A. Enable verbose monitoring.
B. Update the cloud service definition file and the service configuration file.
C. Update the WebRole1 web.config file.
D. Run the Enable-AzureWebsiteApplicationDiagnostic PowerShell cmdlet.
E. Create a storage account.
F. Run the Set-AzureVMDiagnosticsExtensionPowerShell cmdlet.
Answer: A,B,E
Explanation:
step 1 specify the scheduled TransferLogLevelFilter to Verbose in the diagnostics.wadcfg step 2 Update the cloud service definition file and the service configuration file (.cspkg) step 3 best practice is to create a separate storage account for logging diagnostics data
References: http://azure.microsoft.com/en-us/documentation/articles/cloud-services-how-to-monitor/
C. _65503.?$
D. _65503_
E. _65503$
F. 0
Answer: A
Explanation:
http://www.cisco.com/c/en/us/td/docs/ios/12_2/termserv/configuration/guide/ftersv_c/tcfaap re.html
NEW QUESTION: 3
An engineer has integrated a new DMVPN to link remote offices across the internet using Cisco IOS routers. When connecting to remote sites, pings and voice data appear to flow properly and all tunnel stats seem to show that are up. However, when trying to connect to a remote server using RDP, the connection fails. Which action resolves this issue?
A. Replace certificate on the RDP server.
B. Adjust the MTU size within the routers.
C. Add RDP port to the extended ACL.
D. Change DMVPN timeout values.
Answer: A
NEW QUESTION: 4
You manage a cloud service that has a web application named WebRole1.
WebRole1 writes error messages to the Windows Event Log.
Users report receiving an error page with the following message: "Event 26 has occurred.
Contact your system administrator."
You need to access the WebRole1 event log.
Which three actions should you perform? Each correct answer presents part of the solution.
A. Enable verbose monitoring.
B. Update the cloud service definition file and the service configuration file.
C. Update the WebRole1 web.config file.
D. Run the Enable-AzureWebsiteApplicationDiagnostic PowerShell cmdlet.
E. Create a storage account.
F. Run the Set-AzureVMDiagnosticsExtensionPowerShell cmdlet.
Answer: A,B,E
Explanation:
step 1 specify the scheduled TransferLogLevelFilter to Verbose in the diagnostics.wadcfg step 2 Update the cloud service definition file and the service configuration file (.cspkg) step 3 best practice is to create a separate storage account for logging diagnostics data
References: http://azure.microsoft.com/en-us/documentation/articles/cloud-services-how-to-monitor/
65503$
C. _65503.?$
D. _65503_
E. _65503$
F. 0
Answer: A
Explanation:
http://www.cisco.com/c/en/us/td/docs/ios/12_2/termserv/configuration/guide/ftersv_c/tcfaap re.html
NEW QUESTION: 3
An engineer has integrated a new DMVPN to link remote offices across the internet using Cisco IOS routers. When connecting to remote sites, pings and voice data appear to flow properly and all tunnel stats seem to show that are up. However, when trying to connect to a remote server using RDP, the connection fails. Which action resolves this issue?
A. Replace certificate on the RDP server.
B. Adjust the MTU size within the routers.
C. Add RDP port to the extended ACL.
D. Change DMVPN timeout values.
Answer: A
NEW QUESTION: 4
You manage a cloud service that has a web application named WebRole1.
WebRole1 writes error messages to the Windows Event Log.
Users report receiving an error page with the following message: "Event 26 has occurred.
Contact your system administrator."
You need to access the WebRole1 event log.
Which three actions should you perform? Each correct answer presents part of the solution.
A. Enable verbose monitoring.
B. Update the cloud service definition file and the service configuration file.
C. Update the WebRole1 web.config file.
D. Run the Enable-AzureWebsiteApplicationDiagnostic PowerShell cmdlet.
E. Create a storage account.
F. Run the Set-AzureVMDiagnosticsExtensionPowerShell cmdlet.
Answer: A,B,E
Explanation:
step 1 specify the scheduled TransferLogLevelFilter to Verbose in the diagnostics.wadcfg step 2 Update the cloud service definition file and the service configuration file (.cspkg) step 3 best practice is to create a separate storage account for logging diagnostics data
References: http://azure.microsoft.com/en-us/documentation/articles/cloud-services-how-to-monitor/
Keep walking if all you want is free C_SACP_2308 65503$
C. _65503.?$
D. _65503_
E. _65503$
F. 0
Answer: A
Explanation:
http://www.cisco.com/c/en/us/td/docs/ios/12_2/termserv/configuration/guide/ftersv_c/tcfaap re.html
NEW QUESTION: 3
An engineer has integrated a new DMVPN to link remote offices across the internet using Cisco IOS routers. When connecting to remote sites, pings and voice data appear to flow properly and all tunnel stats seem to show that are up. However, when trying to connect to a remote server using RDP, the connection fails. Which action resolves this issue?
A. Replace certificate on the RDP server.
B. Adjust the MTU size within the routers.
C. Add RDP port to the extended ACL.
D. Change DMVPN timeout values.
Answer: A
NEW QUESTION: 4
You manage a cloud service that has a web application named WebRole1.
WebRole1 writes error messages to the Windows Event Log.
Users report receiving an error page with the following message: "Event 26 has occurred.
Contact your system administrator."
You need to access the WebRole1 event log.
Which three actions should you perform? Each correct answer presents part of the solution.
A. Enable verbose monitoring.
B. Update the cloud service definition file and the service configuration file.
C. Update the WebRole1 web.config file.
D. Run the Enable-AzureWebsiteApplicationDiagnostic PowerShell cmdlet.
E. Create a storage account.
F. Run the Set-AzureVMDiagnosticsExtensionPowerShell cmdlet.
Answer: A,B,E
Explanation:
step 1 specify the scheduled TransferLogLevelFilter to Verbose in the diagnostics.wadcfg step 2 Update the cloud service definition file and the service configuration file (.cspkg) step 3 best practice is to create a separate storage account for logging diagnostics data
References: http://azure.microsoft.com/en-us/documentation/articles/cloud-services-how-to-monitor/
C. _65503.?$
D. _65503_
E. _65503$
F. 0
Answer: A
Explanation:
http://www.cisco.com/c/en/us/td/docs/ios/12_2/termserv/configuration/guide/ftersv_c/tcfaap re.html
NEW QUESTION: 3
An engineer has integrated a new DMVPN to link remote offices across the internet using Cisco IOS routers. When connecting to remote sites, pings and voice data appear to flow properly and all tunnel stats seem to show that are up. However, when trying to connect to a remote server using RDP, the connection fails. Which action resolves this issue?
A. Replace certificate on the RDP server.
B. Adjust the MTU size within the routers.
C. Add RDP port to the extended ACL.
D. Change DMVPN timeout values.
Answer: A
NEW QUESTION: 4
You manage a cloud service that has a web application named WebRole1.
WebRole1 writes error messages to the Windows Event Log.
Users report receiving an error page with the following message: "Event 26 has occurred.
Contact your system administrator."
You need to access the WebRole1 event log.
Which three actions should you perform? Each correct answer presents part of the solution.
A. Enable verbose monitoring.
B. Update the cloud service definition file and the service configuration file.
C. Update the WebRole1 web.config file.
D. Run the Enable-AzureWebsiteApplicationDiagnostic PowerShell cmdlet.
E. Create a storage account.
F. Run the Set-AzureVMDiagnosticsExtensionPowerShell cmdlet.
Answer: A,B,E
Explanation:
step 1 specify the scheduled TransferLogLevelFilter to Verbose in the diagnostics.wadcfg step 2 Update the cloud service definition file and the service configuration file (.cspkg) step 3 best practice is to create a separate storage account for logging diagnostics data
References: http://azure.microsoft.com/en-us/documentation/articles/cloud-services-how-to-monitor/
- CIPP-C Test Dump
- C-KYMD-01 New Soft Simulations
- ACP-01101 Interactive Practice Exam
- Terraform-Associate-003 Test Questions
- Study CTAL-TTA Demo
- 300-410 Reliable Test Pattern
- Demo HPE2-N69 Test
- New DOP-C02 Exam Dumps
- C-THR94-2311 Exam Test
- C_TB1200_10 Reliable Test Sims
- Exam Dumps MB-800 Collection
- ADX-201 Practice Engine
- Certification Professional-Cloud-Architect Test Answers
- New Exam C-THR88-2311 Braindumps
- Valid Test C-ARP2P-2308 Bootcamp
- H20-688_V1.0 Latest Test Questions
- CPHQ Valid Exam Voucher
- Exam Dumps 200-301 Pdf
- NCP-DB Detail Explanation
- Exam TDA-C01 Quiz
- Latest C-TBW50H-75 Learning Material
- D-PST-DY-23 Exam Engine
- D-DS-FN-23 Reliable Study Guide
- D-RP-DY-A-24 Valid Test Discount
C. _65503.?$
D. _65503_
E. _65503$
F. 0
Answer: A
Explanation:
http://www.cisco.com/c/en/us/td/docs/ios/12_2/termserv/configuration/guide/ftersv_c/tcfaap re.html
NEW QUESTION: 3
An engineer has integrated a new DMVPN to link remote offices across the internet using Cisco IOS routers. When connecting to remote sites, pings and voice data appear to flow properly and all tunnel stats seem to show that are up. However, when trying to connect to a remote server using RDP, the connection fails. Which action resolves this issue?
A. Replace certificate on the RDP server.
B. Adjust the MTU size within the routers.
C. Add RDP port to the extended ACL.
D. Change DMVPN timeout values.
Answer: A
NEW QUESTION: 4
You manage a cloud service that has a web application named WebRole1.
WebRole1 writes error messages to the Windows Event Log.
Users report receiving an error page with the following message: "Event 26 has occurred.
Contact your system administrator."
You need to access the WebRole1 event log.
Which three actions should you perform? Each correct answer presents part of the solution.
A. Enable verbose monitoring.
B. Update the cloud service definition file and the service configuration file.
C. Update the WebRole1 web.config file.
D. Run the Enable-AzureWebsiteApplicationDiagnostic PowerShell cmdlet.
E. Create a storage account.
F. Run the Set-AzureVMDiagnosticsExtensionPowerShell cmdlet.
Answer: A,B,E
Explanation:
step 1 specify the scheduled TransferLogLevelFilter to Verbose in the diagnostics.wadcfg step 2 Update the cloud service definition file and the service configuration file (.cspkg) step 3 best practice is to create a separate storage account for logging diagnostics data
References: http://azure.microsoft.com/en-us/documentation/articles/cloud-services-how-to-monitor/
C. _65503.?$
D. _65503_
E. _65503$
F. 0
Answer: A
Explanation:
http://www.cisco.com/c/en/us/td/docs/ios/12_2/termserv/configuration/guide/ftersv_c/tcfaap re.html
NEW QUESTION: 3
An engineer has integrated a new DMVPN to link remote offices across the internet using Cisco IOS routers. When connecting to remote sites, pings and voice data appear to flow properly and all tunnel stats seem to show that are up. However, when trying to connect to a remote server using RDP, the connection fails. Which action resolves this issue?
A. Replace certificate on the RDP server.
B. Adjust the MTU size within the routers.
C. Add RDP port to the extended ACL.
D. Change DMVPN timeout values.
Answer: A
NEW QUESTION: 4
You manage a cloud service that has a web application named WebRole1.
WebRole1 writes error messages to the Windows Event Log.
Users report receiving an error page with the following message: "Event 26 has occurred.
Contact your system administrator."
You need to access the WebRole1 event log.
Which three actions should you perform? Each correct answer presents part of the solution.
A. Enable verbose monitoring.
B. Update the cloud service definition file and the service configuration file.
C. Update the WebRole1 web.config file.
D. Run the Enable-AzureWebsiteApplicationDiagnostic PowerShell cmdlet.
E. Create a storage account.
F. Run the Set-AzureVMDiagnosticsExtensionPowerShell cmdlet.
Answer: A,B,E
Explanation:
step 1 specify the scheduled TransferLogLevelFilter to Verbose in the diagnostics.wadcfg step 2 Update the cloud service definition file and the service configuration file (.cspkg) step 3 best practice is to create a separate storage account for logging diagnostics data
References: http://azure.microsoft.com/en-us/documentation/articles/cloud-services-how-to-monitor/
C. _65503.?$
D. _65503_
E. _65503$
F. 0
Answer: A
Explanation:
http://www.cisco.com/c/en/us/td/docs/ios/12_2/termserv/configuration/guide/ftersv_c/tcfaap re.html
NEW QUESTION: 3
An engineer has integrated a new DMVPN to link remote offices across the internet using Cisco IOS routers. When connecting to remote sites, pings and voice data appear to flow properly and all tunnel stats seem to show that are up. However, when trying to connect to a remote server using RDP, the connection fails. Which action resolves this issue?
A. Replace certificate on the RDP server.
B. Adjust the MTU size within the routers.
C. Add RDP port to the extended ACL.
D. Change DMVPN timeout values.
Answer: A
NEW QUESTION: 4
You manage a cloud service that has a web application named WebRole1.
WebRole1 writes error messages to the Windows Event Log.
Users report receiving an error page with the following message: "Event 26 has occurred.
Contact your system administrator."
You need to access the WebRole1 event log.
Which three actions should you perform? Each correct answer presents part of the solution.
A. Enable verbose monitoring.
B. Update the cloud service definition file and the service configuration file.
C. Update the WebRole1 web.config file.
D. Run the Enable-AzureWebsiteApplicationDiagnostic PowerShell cmdlet.
E. Create a storage account.
F. Run the Set-AzureVMDiagnosticsExtensionPowerShell cmdlet.
Answer: A,B,E
Explanation:
step 1 specify the scheduled TransferLogLevelFilter to Verbose in the diagnostics.wadcfg step 2 Update the cloud service definition file and the service configuration file (.cspkg) step 3 best practice is to create a separate storage account for logging diagnostics data
References: http://azure.microsoft.com/en-us/documentation/articles/cloud-services-how-to-monitor/
C. _65503.?$
D. _65503_
E. _65503$
F. 0
Answer: A
Explanation:
http://www.cisco.com/c/en/us/td/docs/ios/12_2/termserv/configuration/guide/ftersv_c/tcfaap re.html
NEW QUESTION: 3
An engineer has integrated a new DMVPN to link remote offices across the internet using Cisco IOS routers. When connecting to remote sites, pings and voice data appear to flow properly and all tunnel stats seem to show that are up. However, when trying to connect to a remote server using RDP, the connection fails. Which action resolves this issue?
A. Replace certificate on the RDP server.
B. Adjust the MTU size within the routers.
C. Add RDP port to the extended ACL.
D. Change DMVPN timeout values.
Answer: A
NEW QUESTION: 4
You manage a cloud service that has a web application named WebRole1.
WebRole1 writes error messages to the Windows Event Log.
Users report receiving an error page with the following message: "Event 26 has occurred.
Contact your system administrator."
You need to access the WebRole1 event log.
Which three actions should you perform? Each correct answer presents part of the solution.
A. Enable verbose monitoring.
B. Update the cloud service definition file and the service configuration file.
C. Update the WebRole1 web.config file.
D. Run the Enable-AzureWebsiteApplicationDiagnostic PowerShell cmdlet.
E. Create a storage account.
F. Run the Set-AzureVMDiagnosticsExtensionPowerShell cmdlet.
Answer: A,B,E
Explanation:
step 1 specify the scheduled TransferLogLevelFilter to Verbose in the diagnostics.wadcfg step 2 Update the cloud service definition file and the service configuration file (.cspkg) step 3 best practice is to create a separate storage account for logging diagnostics data
References: http://azure.microsoft.com/en-us/documentation/articles/cloud-services-how-to-monitor/
65503$
C. _65503.?$
D. _65503_
E. _65503$
F. 0
Answer: A
Explanation:
http://www.cisco.com/c/en/us/td/docs/ios/12_2/termserv/configuration/guide/ftersv_c/tcfaap re.html
NEW QUESTION: 3
An engineer has integrated a new DMVPN to link remote offices across the internet using Cisco IOS routers. When connecting to remote sites, pings and voice data appear to flow properly and all tunnel stats seem to show that are up. However, when trying to connect to a remote server using RDP, the connection fails. Which action resolves this issue?
A. Replace certificate on the RDP server.
B. Adjust the MTU size within the routers.
C. Add RDP port to the extended ACL.
D. Change DMVPN timeout values.
Answer: A
NEW QUESTION: 4
You manage a cloud service that has a web application named WebRole1.
WebRole1 writes error messages to the Windows Event Log.
Users report receiving an error page with the following message: "Event 26 has occurred.
Contact your system administrator."
You need to access the WebRole1 event log.
Which three actions should you perform? Each correct answer presents part of the solution.
A. Enable verbose monitoring.
B. Update the cloud service definition file and the service configuration file.
C. Update the WebRole1 web.config file.
D. Run the Enable-AzureWebsiteApplicationDiagnostic PowerShell cmdlet.
E. Create a storage account.
F. Run the Set-AzureVMDiagnosticsExtensionPowerShell cmdlet.
Answer: A,B,E
Explanation:
step 1 specify the scheduled TransferLogLevelFilter to Verbose in the diagnostics.wadcfg step 2 Update the cloud service definition file and the service configuration file (.cspkg) step 3 best practice is to create a separate storage account for logging diagnostics data
References: http://azure.microsoft.com/en-us/documentation/articles/cloud-services-how-to-monitor/
What you will not find at Ce-Isareti are latest C_SACP_2308 65503$
C. _65503.?$
D. _65503_
E. _65503$
F. 0
Answer: A
Explanation:
http://www.cisco.com/c/en/us/td/docs/ios/12_2/termserv/configuration/guide/ftersv_c/tcfaap re.html
NEW QUESTION: 3
An engineer has integrated a new DMVPN to link remote offices across the internet using Cisco IOS routers. When connecting to remote sites, pings and voice data appear to flow properly and all tunnel stats seem to show that are up. However, when trying to connect to a remote server using RDP, the connection fails. Which action resolves this issue?
A. Replace certificate on the RDP server.
B. Adjust the MTU size within the routers.
C. Add RDP port to the extended ACL.
D. Change DMVPN timeout values.
Answer: A
NEW QUESTION: 4
You manage a cloud service that has a web application named WebRole1.
WebRole1 writes error messages to the Windows Event Log.
Users report receiving an error page with the following message: "Event 26 has occurred.
Contact your system administrator."
You need to access the WebRole1 event log.
Which three actions should you perform? Each correct answer presents part of the solution.
A. Enable verbose monitoring.
B. Update the cloud service definition file and the service configuration file.
C. Update the WebRole1 web.config file.
D. Run the Enable-AzureWebsiteApplicationDiagnostic PowerShell cmdlet.
E. Create a storage account.
F. Run the Set-AzureVMDiagnosticsExtensionPowerShell cmdlet.
Answer: A,B,E
Explanation:
step 1 specify the scheduled TransferLogLevelFilter to Verbose in the diagnostics.wadcfg step 2 Update the cloud service definition file and the service configuration file (.cspkg) step 3 best practice is to create a separate storage account for logging diagnostics data
References: http://azure.microsoft.com/en-us/documentation/articles/cloud-services-how-to-monitor/
C. _65503.?$
D. _65503_
E. _65503$
F. 0
Answer: A
Explanation:
http://www.cisco.com/c/en/us/td/docs/ios/12_2/termserv/configuration/guide/ftersv_c/tcfaap re.html
NEW QUESTION: 3
An engineer has integrated a new DMVPN to link remote offices across the internet using Cisco IOS routers. When connecting to remote sites, pings and voice data appear to flow properly and all tunnel stats seem to show that are up. However, when trying to connect to a remote server using RDP, the connection fails. Which action resolves this issue?
A. Replace certificate on the RDP server.
B. Adjust the MTU size within the routers.
C. Add RDP port to the extended ACL.
D. Change DMVPN timeout values.
Answer: A
NEW QUESTION: 4
You manage a cloud service that has a web application named WebRole1.
WebRole1 writes error messages to the Windows Event Log.
Users report receiving an error page with the following message: "Event 26 has occurred.
Contact your system administrator."
You need to access the WebRole1 event log.
Which three actions should you perform? Each correct answer presents part of the solution.
A. Enable verbose monitoring.
B. Update the cloud service definition file and the service configuration file.
C. Update the WebRole1 web.config file.
D. Run the Enable-AzureWebsiteApplicationDiagnostic PowerShell cmdlet.
E. Create a storage account.
F. Run the Set-AzureVMDiagnosticsExtensionPowerShell cmdlet.
Answer: A,B,E
Explanation:
step 1 specify the scheduled TransferLogLevelFilter to Verbose in the diagnostics.wadcfg step 2 Update the cloud service definition file and the service configuration file (.cspkg) step 3 best practice is to create a separate storage account for logging diagnostics data
References: http://azure.microsoft.com/en-us/documentation/articles/cloud-services-how-to-monitor/
C. _65503.?$
D. _65503_
E. _65503$
F. 0
Answer: A
Explanation:
http://www.cisco.com/c/en/us/td/docs/ios/12_2/termserv/configuration/guide/ftersv_c/tcfaap re.html
NEW QUESTION: 3
An engineer has integrated a new DMVPN to link remote offices across the internet using Cisco IOS routers. When connecting to remote sites, pings and voice data appear to flow properly and all tunnel stats seem to show that are up. However, when trying to connect to a remote server using RDP, the connection fails. Which action resolves this issue?
A. Replace certificate on the RDP server.
B. Adjust the MTU size within the routers.
C. Add RDP port to the extended ACL.
D. Change DMVPN timeout values.
Answer: A
NEW QUESTION: 4
You manage a cloud service that has a web application named WebRole1.
WebRole1 writes error messages to the Windows Event Log.
Users report receiving an error page with the following message: "Event 26 has occurred.
Contact your system administrator."
You need to access the WebRole1 event log.
Which three actions should you perform? Each correct answer presents part of the solution.
A. Enable verbose monitoring.
B. Update the cloud service definition file and the service configuration file.
C. Update the WebRole1 web.config file.
D. Run the Enable-AzureWebsiteApplicationDiagnostic PowerShell cmdlet.
E. Create a storage account.
F. Run the Set-AzureVMDiagnosticsExtensionPowerShell cmdlet.
Answer: A,B,E
Explanation:
step 1 specify the scheduled TransferLogLevelFilter to Verbose in the diagnostics.wadcfg step 2 Update the cloud service definition file and the service configuration file (.cspkg) step 3 best practice is to create a separate storage account for logging diagnostics data
References: http://azure.microsoft.com/en-us/documentation/articles/cloud-services-how-to-monitor/
- CIPP-C Test Dump
- C-KYMD-01 New Soft Simulations
- ACP-01101 Interactive Practice Exam
- Terraform-Associate-003 Test Questions
- Study CTAL-TTA Demo
- 300-410 Reliable Test Pattern
- Demo HPE2-N69 Test
- New DOP-C02 Exam Dumps
- C-THR94-2311 Exam Test
- C_TB1200_10 Reliable Test Sims
- Exam Dumps MB-800 Collection
- ADX-201 Practice Engine
- Certification Professional-Cloud-Architect Test Answers
- New Exam C-THR88-2311 Braindumps
- Valid Test C-ARP2P-2308 Bootcamp
- H20-688_V1.0 Latest Test Questions
- CPHQ Valid Exam Voucher
- Exam Dumps 200-301 Pdf
- NCP-DB Detail Explanation
- Exam TDA-C01 Quiz
- Latest C-TBW50H-75 Learning Material
- D-PST-DY-23 Exam Engine
- D-DS-FN-23 Reliable Study Guide
- D-RP-DY-A-24 Valid Test Discount
C. _65503.?$
D. _65503_
E. _65503$
F. 0
Answer: A
Explanation:
http://www.cisco.com/c/en/us/td/docs/ios/12_2/termserv/configuration/guide/ftersv_c/tcfaap re.html
NEW QUESTION: 3
An engineer has integrated a new DMVPN to link remote offices across the internet using Cisco IOS routers. When connecting to remote sites, pings and voice data appear to flow properly and all tunnel stats seem to show that are up. However, when trying to connect to a remote server using RDP, the connection fails. Which action resolves this issue?
A. Replace certificate on the RDP server.
B. Adjust the MTU size within the routers.
C. Add RDP port to the extended ACL.
D. Change DMVPN timeout values.
Answer: A
NEW QUESTION: 4
You manage a cloud service that has a web application named WebRole1.
WebRole1 writes error messages to the Windows Event Log.
Users report receiving an error page with the following message: "Event 26 has occurred.
Contact your system administrator."
You need to access the WebRole1 event log.
Which three actions should you perform? Each correct answer presents part of the solution.
A. Enable verbose monitoring.
B. Update the cloud service definition file and the service configuration file.
C. Update the WebRole1 web.config file.
D. Run the Enable-AzureWebsiteApplicationDiagnostic PowerShell cmdlet.
E. Create a storage account.
F. Run the Set-AzureVMDiagnosticsExtensionPowerShell cmdlet.
Answer: A,B,E
Explanation:
step 1 specify the scheduled TransferLogLevelFilter to Verbose in the diagnostics.wadcfg step 2 Update the cloud service definition file and the service configuration file (.cspkg) step 3 best practice is to create a separate storage account for logging diagnostics data
References: http://azure.microsoft.com/en-us/documentation/articles/cloud-services-how-to-monitor/
65503$
C. _65503.?$
D. _65503_
E. _65503$
F. 0
Answer: A
Explanation:
http://www.cisco.com/c/en/us/td/docs/ios/12_2/termserv/configuration/guide/ftersv_c/tcfaap re.html
NEW QUESTION: 3
An engineer has integrated a new DMVPN to link remote offices across the internet using Cisco IOS routers. When connecting to remote sites, pings and voice data appear to flow properly and all tunnel stats seem to show that are up. However, when trying to connect to a remote server using RDP, the connection fails. Which action resolves this issue?
A. Replace certificate on the RDP server.
B. Adjust the MTU size within the routers.
C. Add RDP port to the extended ACL.
D. Change DMVPN timeout values.
Answer: A
NEW QUESTION: 4
You manage a cloud service that has a web application named WebRole1.
WebRole1 writes error messages to the Windows Event Log.
Users report receiving an error page with the following message: "Event 26 has occurred.
Contact your system administrator."
You need to access the WebRole1 event log.
Which three actions should you perform? Each correct answer presents part of the solution.
A. Enable verbose monitoring.
B. Update the cloud service definition file and the service configuration file.
C. Update the WebRole1 web.config file.
D. Run the Enable-AzureWebsiteApplicationDiagnostic PowerShell cmdlet.
E. Create a storage account.
F. Run the Set-AzureVMDiagnosticsExtensionPowerShell cmdlet.
Answer: A,B,E
Explanation:
step 1 specify the scheduled TransferLogLevelFilter to Verbose in the diagnostics.wadcfg step 2 Update the cloud service definition file and the service configuration file (.cspkg) step 3 best practice is to create a separate storage account for logging diagnostics data
References: http://azure.microsoft.com/en-us/documentation/articles/cloud-services-how-to-monitor/
Proper training for C_SACP_2308 65503$
C. _65503.?$
D. _65503_
E. _65503$
F. 0
Answer: A
Explanation:
http://www.cisco.com/c/en/us/td/docs/ios/12_2/termserv/configuration/guide/ftersv_c/tcfaap re.html
NEW QUESTION: 3
An engineer has integrated a new DMVPN to link remote offices across the internet using Cisco IOS routers. When connecting to remote sites, pings and voice data appear to flow properly and all tunnel stats seem to show that are up. However, when trying to connect to a remote server using RDP, the connection fails. Which action resolves this issue?
A. Replace certificate on the RDP server.
B. Adjust the MTU size within the routers.
C. Add RDP port to the extended ACL.
D. Change DMVPN timeout values.
Answer: A
NEW QUESTION: 4
You manage a cloud service that has a web application named WebRole1.
WebRole1 writes error messages to the Windows Event Log.
Users report receiving an error page with the following message: "Event 26 has occurred.
Contact your system administrator."
You need to access the WebRole1 event log.
Which three actions should you perform? Each correct answer presents part of the solution.
A. Enable verbose monitoring.
B. Update the cloud service definition file and the service configuration file.
C. Update the WebRole1 web.config file.
D. Run the Enable-AzureWebsiteApplicationDiagnostic PowerShell cmdlet.
E. Create a storage account.
F. Run the Set-AzureVMDiagnosticsExtensionPowerShell cmdlet.
Answer: A,B,E
Explanation:
step 1 specify the scheduled TransferLogLevelFilter to Verbose in the diagnostics.wadcfg step 2 Update the cloud service definition file and the service configuration file (.cspkg) step 3 best practice is to create a separate storage account for logging diagnostics data
References: http://azure.microsoft.com/en-us/documentation/articles/cloud-services-how-to-monitor/
C. _65503.?$
D. _65503_
E. _65503$
F. 0
Answer: A
Explanation:
http://www.cisco.com/c/en/us/td/docs/ios/12_2/termserv/configuration/guide/ftersv_c/tcfaap re.html
NEW QUESTION: 3
An engineer has integrated a new DMVPN to link remote offices across the internet using Cisco IOS routers. When connecting to remote sites, pings and voice data appear to flow properly and all tunnel stats seem to show that are up. However, when trying to connect to a remote server using RDP, the connection fails. Which action resolves this issue?
A. Replace certificate on the RDP server.
B. Adjust the MTU size within the routers.
C. Add RDP port to the extended ACL.
D. Change DMVPN timeout values.
Answer: A
NEW QUESTION: 4
You manage a cloud service that has a web application named WebRole1.
WebRole1 writes error messages to the Windows Event Log.
Users report receiving an error page with the following message: "Event 26 has occurred.
Contact your system administrator."
You need to access the WebRole1 event log.
Which three actions should you perform? Each correct answer presents part of the solution.
A. Enable verbose monitoring.
B. Update the cloud service definition file and the service configuration file.
C. Update the WebRole1 web.config file.
D. Run the Enable-AzureWebsiteApplicationDiagnostic PowerShell cmdlet.
E. Create a storage account.
F. Run the Set-AzureVMDiagnosticsExtensionPowerShell cmdlet.
Answer: A,B,E
Explanation:
step 1 specify the scheduled TransferLogLevelFilter to Verbose in the diagnostics.wadcfg step 2 Update the cloud service definition file and the service configuration file (.cspkg) step 3 best practice is to create a separate storage account for logging diagnostics data
References: http://azure.microsoft.com/en-us/documentation/articles/cloud-services-how-to-monitor/
C. _65503.?$
D. _65503_
E. _65503$
F. 0
Answer: A
Explanation:
http://www.cisco.com/c/en/us/td/docs/ios/12_2/termserv/configuration/guide/ftersv_c/tcfaap re.html
NEW QUESTION: 3
An engineer has integrated a new DMVPN to link remote offices across the internet using Cisco IOS routers. When connecting to remote sites, pings and voice data appear to flow properly and all tunnel stats seem to show that are up. However, when trying to connect to a remote server using RDP, the connection fails. Which action resolves this issue?
A. Replace certificate on the RDP server.
B. Adjust the MTU size within the routers.
C. Add RDP port to the extended ACL.
D. Change DMVPN timeout values.
Answer: A
NEW QUESTION: 4
You manage a cloud service that has a web application named WebRole1.
WebRole1 writes error messages to the Windows Event Log.
Users report receiving an error page with the following message: "Event 26 has occurred.
Contact your system administrator."
You need to access the WebRole1 event log.
Which three actions should you perform? Each correct answer presents part of the solution.
A. Enable verbose monitoring.
B. Update the cloud service definition file and the service configuration file.
C. Update the WebRole1 web.config file.
D. Run the Enable-AzureWebsiteApplicationDiagnostic PowerShell cmdlet.
E. Create a storage account.
F. Run the Set-AzureVMDiagnosticsExtensionPowerShell cmdlet.
Answer: A,B,E
Explanation:
step 1 specify the scheduled TransferLogLevelFilter to Verbose in the diagnostics.wadcfg step 2 Update the cloud service definition file and the service configuration file (.cspkg) step 3 best practice is to create a separate storage account for logging diagnostics data
References: http://azure.microsoft.com/en-us/documentation/articles/cloud-services-how-to-monitor/
C. _65503.?$
D. _65503_
E. _65503$
F. 0
Answer: A
Explanation:
http://www.cisco.com/c/en/us/td/docs/ios/12_2/termserv/configuration/guide/ftersv_c/tcfaap re.html
NEW QUESTION: 3
An engineer has integrated a new DMVPN to link remote offices across the internet using Cisco IOS routers. When connecting to remote sites, pings and voice data appear to flow properly and all tunnel stats seem to show that are up. However, when trying to connect to a remote server using RDP, the connection fails. Which action resolves this issue?
A. Replace certificate on the RDP server.
B. Adjust the MTU size within the routers.
C. Add RDP port to the extended ACL.
D. Change DMVPN timeout values.
Answer: A
NEW QUESTION: 4
You manage a cloud service that has a web application named WebRole1.
WebRole1 writes error messages to the Windows Event Log.
Users report receiving an error page with the following message: "Event 26 has occurred.
Contact your system administrator."
You need to access the WebRole1 event log.
Which three actions should you perform? Each correct answer presents part of the solution.
A. Enable verbose monitoring.
B. Update the cloud service definition file and the service configuration file.
C. Update the WebRole1 web.config file.
D. Run the Enable-AzureWebsiteApplicationDiagnostic PowerShell cmdlet.
E. Create a storage account.
F. Run the Set-AzureVMDiagnosticsExtensionPowerShell cmdlet.
Answer: A,B,E
Explanation:
step 1 specify the scheduled TransferLogLevelFilter to Verbose in the diagnostics.wadcfg step 2 Update the cloud service definition file and the service configuration file (.cspkg) step 3 best practice is to create a separate storage account for logging diagnostics data
References: http://azure.microsoft.com/en-us/documentation/articles/cloud-services-how-to-monitor/
C. _65503.?$
D. _65503_
E. _65503$
F. 0
Answer: A
Explanation:
http://www.cisco.com/c/en/us/td/docs/ios/12_2/termserv/configuration/guide/ftersv_c/tcfaap re.html
NEW QUESTION: 3
An engineer has integrated a new DMVPN to link remote offices across the internet using Cisco IOS routers. When connecting to remote sites, pings and voice data appear to flow properly and all tunnel stats seem to show that are up. However, when trying to connect to a remote server using RDP, the connection fails. Which action resolves this issue?
A. Replace certificate on the RDP server.
B. Adjust the MTU size within the routers.
C. Add RDP port to the extended ACL.
D. Change DMVPN timeout values.
Answer: A
NEW QUESTION: 4
You manage a cloud service that has a web application named WebRole1.
WebRole1 writes error messages to the Windows Event Log.
Users report receiving an error page with the following message: "Event 26 has occurred.
Contact your system administrator."
You need to access the WebRole1 event log.
Which three actions should you perform? Each correct answer presents part of the solution.
A. Enable verbose monitoring.
B. Update the cloud service definition file and the service configuration file.
C. Update the WebRole1 web.config file.
D. Run the Enable-AzureWebsiteApplicationDiagnostic PowerShell cmdlet.
E. Create a storage account.
F. Run the Set-AzureVMDiagnosticsExtensionPowerShell cmdlet.
Answer: A,B,E
Explanation:
step 1 specify the scheduled TransferLogLevelFilter to Verbose in the diagnostics.wadcfg step 2 Update the cloud service definition file and the service configuration file (.cspkg) step 3 best practice is to create a separate storage account for logging diagnostics data
References: http://azure.microsoft.com/en-us/documentation/articles/cloud-services-how-to-monitor/
C. _65503.?$
D. _65503_
E. _65503$
F. 0
Answer: A
Explanation:
http://www.cisco.com/c/en/us/td/docs/ios/12_2/termserv/configuration/guide/ftersv_c/tcfaap re.html
NEW QUESTION: 3
An engineer has integrated a new DMVPN to link remote offices across the internet using Cisco IOS routers. When connecting to remote sites, pings and voice data appear to flow properly and all tunnel stats seem to show that are up. However, when trying to connect to a remote server using RDP, the connection fails. Which action resolves this issue?
A. Replace certificate on the RDP server.
B. Adjust the MTU size within the routers.
C. Add RDP port to the extended ACL.
D. Change DMVPN timeout values.
Answer: A
NEW QUESTION: 4
You manage a cloud service that has a web application named WebRole1.
WebRole1 writes error messages to the Windows Event Log.
Users report receiving an error page with the following message: "Event 26 has occurred.
Contact your system administrator."
You need to access the WebRole1 event log.
Which three actions should you perform? Each correct answer presents part of the solution.
A. Enable verbose monitoring.
B. Update the cloud service definition file and the service configuration file.
C. Update the WebRole1 web.config file.
D. Run the Enable-AzureWebsiteApplicationDiagnostic PowerShell cmdlet.
E. Create a storage account.
F. Run the Set-AzureVMDiagnosticsExtensionPowerShell cmdlet.
Answer: A,B,E
Explanation:
step 1 specify the scheduled TransferLogLevelFilter to Verbose in the diagnostics.wadcfg step 2 Update the cloud service definition file and the service configuration file (.cspkg) step 3 best practice is to create a separate storage account for logging diagnostics data
References: http://azure.microsoft.com/en-us/documentation/articles/cloud-services-how-to-monitor/
C. _65503.?$
D. _65503_
E. _65503$
F. 0
Answer: A
Explanation:
http://www.cisco.com/c/en/us/td/docs/ios/12_2/termserv/configuration/guide/ftersv_c/tcfaap re.html
NEW QUESTION: 3
An engineer has integrated a new DMVPN to link remote offices across the internet using Cisco IOS routers. When connecting to remote sites, pings and voice data appear to flow properly and all tunnel stats seem to show that are up. However, when trying to connect to a remote server using RDP, the connection fails. Which action resolves this issue?
A. Replace certificate on the RDP server.
B. Adjust the MTU size within the routers.
C. Add RDP port to the extended ACL.
D. Change DMVPN timeout values.
Answer: A
NEW QUESTION: 4
You manage a cloud service that has a web application named WebRole1.
WebRole1 writes error messages to the Windows Event Log.
Users report receiving an error page with the following message: "Event 26 has occurred.
Contact your system administrator."
You need to access the WebRole1 event log.
Which three actions should you perform? Each correct answer presents part of the solution.
A. Enable verbose monitoring.
B. Update the cloud service definition file and the service configuration file.
C. Update the WebRole1 web.config file.
D. Run the Enable-AzureWebsiteApplicationDiagnostic PowerShell cmdlet.
E. Create a storage account.
F. Run the Set-AzureVMDiagnosticsExtensionPowerShell cmdlet.
Answer: A,B,E
Explanation:
step 1 specify the scheduled TransferLogLevelFilter to Verbose in the diagnostics.wadcfg step 2 Update the cloud service definition file and the service configuration file (.cspkg) step 3 best practice is to create a separate storage account for logging diagnostics data
References: http://azure.microsoft.com/en-us/documentation/articles/cloud-services-how-to-monitor/
Don't settle for sideline C_SACP_2308 65503$
C. _65503.?$
D. _65503_
E. _65503$
F. 0
Answer: A
Explanation:
http://www.cisco.com/c/en/us/td/docs/ios/12_2/termserv/configuration/guide/ftersv_c/tcfaap re.html
NEW QUESTION: 3
An engineer has integrated a new DMVPN to link remote offices across the internet using Cisco IOS routers. When connecting to remote sites, pings and voice data appear to flow properly and all tunnel stats seem to show that are up. However, when trying to connect to a remote server using RDP, the connection fails. Which action resolves this issue?
A. Replace certificate on the RDP server.
B. Adjust the MTU size within the routers.
C. Add RDP port to the extended ACL.
D. Change DMVPN timeout values.
Answer: A
NEW QUESTION: 4
You manage a cloud service that has a web application named WebRole1.
WebRole1 writes error messages to the Windows Event Log.
Users report receiving an error page with the following message: "Event 26 has occurred.
Contact your system administrator."
You need to access the WebRole1 event log.
Which three actions should you perform? Each correct answer presents part of the solution.
A. Enable verbose monitoring.
B. Update the cloud service definition file and the service configuration file.
C. Update the WebRole1 web.config file.
D. Run the Enable-AzureWebsiteApplicationDiagnostic PowerShell cmdlet.
E. Create a storage account.
F. Run the Set-AzureVMDiagnosticsExtensionPowerShell cmdlet.
Answer: A,B,E
Explanation:
step 1 specify the scheduled TransferLogLevelFilter to Verbose in the diagnostics.wadcfg step 2 Update the cloud service definition file and the service configuration file (.cspkg) step 3 best practice is to create a separate storage account for logging diagnostics data
References: http://azure.microsoft.com/en-us/documentation/articles/cloud-services-how-to-monitor/
C. _65503.?$
D. _65503_
E. _65503$
F. 0
Answer: A
Explanation:
http://www.cisco.com/c/en/us/td/docs/ios/12_2/termserv/configuration/guide/ftersv_c/tcfaap re.html
NEW QUESTION: 3
An engineer has integrated a new DMVPN to link remote offices across the internet using Cisco IOS routers. When connecting to remote sites, pings and voice data appear to flow properly and all tunnel stats seem to show that are up. However, when trying to connect to a remote server using RDP, the connection fails. Which action resolves this issue?
A. Replace certificate on the RDP server.
B. Adjust the MTU size within the routers.
C. Add RDP port to the extended ACL.
D. Change DMVPN timeout values.
Answer: A
NEW QUESTION: 4
You manage a cloud service that has a web application named WebRole1.
WebRole1 writes error messages to the Windows Event Log.
Users report receiving an error page with the following message: "Event 26 has occurred.
Contact your system administrator."
You need to access the WebRole1 event log.
Which three actions should you perform? Each correct answer presents part of the solution.
A. Enable verbose monitoring.
B. Update the cloud service definition file and the service configuration file.
C. Update the WebRole1 web.config file.
D. Run the Enable-AzureWebsiteApplicationDiagnostic PowerShell cmdlet.
E. Create a storage account.
F. Run the Set-AzureVMDiagnosticsExtensionPowerShell cmdlet.
Answer: A,B,E
Explanation:
step 1 specify the scheduled TransferLogLevelFilter to Verbose in the diagnostics.wadcfg step 2 Update the cloud service definition file and the service configuration file (.cspkg) step 3 best practice is to create a separate storage account for logging diagnostics data
References: http://azure.microsoft.com/en-us/documentation/articles/cloud-services-how-to-monitor/
C. _65503.?$
D. _65503_
E. _65503$
F. 0
Answer: A
Explanation:
http://www.cisco.com/c/en/us/td/docs/ios/12_2/termserv/configuration/guide/ftersv_c/tcfaap re.html
NEW QUESTION: 3
An engineer has integrated a new DMVPN to link remote offices across the internet using Cisco IOS routers. When connecting to remote sites, pings and voice data appear to flow properly and all tunnel stats seem to show that are up. However, when trying to connect to a remote server using RDP, the connection fails. Which action resolves this issue?
A. Replace certificate on the RDP server.
B. Adjust the MTU size within the routers.
C. Add RDP port to the extended ACL.
D. Change DMVPN timeout values.
Answer: A
NEW QUESTION: 4
You manage a cloud service that has a web application named WebRole1.
WebRole1 writes error messages to the Windows Event Log.
Users report receiving an error page with the following message: "Event 26 has occurred.
Contact your system administrator."
You need to access the WebRole1 event log.
Which three actions should you perform? Each correct answer presents part of the solution.
A. Enable verbose monitoring.
B. Update the cloud service definition file and the service configuration file.
C. Update the WebRole1 web.config file.
D. Run the Enable-AzureWebsiteApplicationDiagnostic PowerShell cmdlet.
E. Create a storage account.
F. Run the Set-AzureVMDiagnosticsExtensionPowerShell cmdlet.
Answer: A,B,E
Explanation:
step 1 specify the scheduled TransferLogLevelFilter to Verbose in the diagnostics.wadcfg step 2 Update the cloud service definition file and the service configuration file (.cspkg) step 3 best practice is to create a separate storage account for logging diagnostics data
References: http://azure.microsoft.com/en-us/documentation/articles/cloud-services-how-to-monitor/
C. _65503.?$
D. _65503_
E. _65503$
F. 0
Answer: A
Explanation:
http://www.cisco.com/c/en/us/td/docs/ios/12_2/termserv/configuration/guide/ftersv_c/tcfaap re.html
NEW QUESTION: 3
An engineer has integrated a new DMVPN to link remote offices across the internet using Cisco IOS routers. When connecting to remote sites, pings and voice data appear to flow properly and all tunnel stats seem to show that are up. However, when trying to connect to a remote server using RDP, the connection fails. Which action resolves this issue?
A. Replace certificate on the RDP server.
B. Adjust the MTU size within the routers.
C. Add RDP port to the extended ACL.
D. Change DMVPN timeout values.
Answer: A
NEW QUESTION: 4
You manage a cloud service that has a web application named WebRole1.
WebRole1 writes error messages to the Windows Event Log.
Users report receiving an error page with the following message: "Event 26 has occurred.
Contact your system administrator."
You need to access the WebRole1 event log.
Which three actions should you perform? Each correct answer presents part of the solution.
A. Enable verbose monitoring.
B. Update the cloud service definition file and the service configuration file.
C. Update the WebRole1 web.config file.
D. Run the Enable-AzureWebsiteApplicationDiagnostic PowerShell cmdlet.
E. Create a storage account.
F. Run the Set-AzureVMDiagnosticsExtensionPowerShell cmdlet.
Answer: A,B,E
Explanation:
step 1 specify the scheduled TransferLogLevelFilter to Verbose in the diagnostics.wadcfg step 2 Update the cloud service definition file and the service configuration file (.cspkg) step 3 best practice is to create a separate storage account for logging diagnostics data
References: http://azure.microsoft.com/en-us/documentation/articles/cloud-services-how-to-monitor/
C. _65503.?$
D. _65503_
E. _65503$
F. 0
Answer: A
Explanation:
http://www.cisco.com/c/en/us/td/docs/ios/12_2/termserv/configuration/guide/ftersv_c/tcfaap re.html
NEW QUESTION: 3
An engineer has integrated a new DMVPN to link remote offices across the internet using Cisco IOS routers. When connecting to remote sites, pings and voice data appear to flow properly and all tunnel stats seem to show that are up. However, when trying to connect to a remote server using RDP, the connection fails. Which action resolves this issue?
A. Replace certificate on the RDP server.
B. Adjust the MTU size within the routers.
C. Add RDP port to the extended ACL.
D. Change DMVPN timeout values.
Answer: A
NEW QUESTION: 4
You manage a cloud service that has a web application named WebRole1.
WebRole1 writes error messages to the Windows Event Log.
Users report receiving an error page with the following message: "Event 26 has occurred.
Contact your system administrator."
You need to access the WebRole1 event log.
Which three actions should you perform? Each correct answer presents part of the solution.
A. Enable verbose monitoring.
B. Update the cloud service definition file and the service configuration file.
C. Update the WebRole1 web.config file.
D. Run the Enable-AzureWebsiteApplicationDiagnostic PowerShell cmdlet.
E. Create a storage account.
F. Run the Set-AzureVMDiagnosticsExtensionPowerShell cmdlet.
Answer: A,B,E
Explanation:
step 1 specify the scheduled TransferLogLevelFilter to Verbose in the diagnostics.wadcfg step 2 Update the cloud service definition file and the service configuration file (.cspkg) step 3 best practice is to create a separate storage account for logging diagnostics data
References: http://azure.microsoft.com/en-us/documentation/articles/cloud-services-how-to-monitor/