Passing the HP2-I57 65503$
E. _65503.?$
F. _65503_
Answer: A
Explanation:
http://www.cisco.com/c/en/us/td/docs/ios/12_2/termserv/configuration/guide/ftersv_c/tcfaap re.html
NEW QUESTION: 3
An engineer has integrated a new DMVPN to link remote offices across the internet using Cisco IOS routers. When connecting to remote sites, pings and voice data appear to flow properly and all tunnel stats seem to show that are up. However, when trying to connect to a remote server using RDP, the connection fails. Which action resolves this issue?
A. Add RDP port to the extended ACL.
B. Replace certificate on the RDP server.
C. Adjust the MTU size within the routers.
D. Change DMVPN timeout values.
Answer: B
NEW QUESTION: 4
You manage a cloud service that has a web application named WebRole1.
WebRole1 writes error messages to the Windows Event Log.
Users report receiving an error page with the following message: "Event 26 has occurred.
Contact your system administrator."
You need to access the WebRole1 event log.
Which three actions should you perform? Each correct answer presents part of the solution.
A. Run the Enable-AzureWebsiteApplicationDiagnostic PowerShell cmdlet.
B. Create a storage account.
C. Update the cloud service definition file and the service configuration file.
D. Enable verbose monitoring.
E. Update the WebRole1 web.config file.
F. Run the Set-AzureVMDiagnosticsExtensionPowerShell cmdlet.
Answer: B,C,D
Explanation:
step 1 specify the scheduled TransferLogLevelFilter to Verbose in the diagnostics.wadcfg step 2 Update the cloud service definition file and the service configuration file (.cspkg) step 3 best practice is to create a separate storage account for logging diagnostics data
References: http://azure.microsoft.com/en-us/documentation/articles/cloud-services-how-to-monitor/
E. _65503.?$
F. _65503_
Answer: A
Explanation:
http://www.cisco.com/c/en/us/td/docs/ios/12_2/termserv/configuration/guide/ftersv_c/tcfaap re.html
NEW QUESTION: 3
An engineer has integrated a new DMVPN to link remote offices across the internet using Cisco IOS routers. When connecting to remote sites, pings and voice data appear to flow properly and all tunnel stats seem to show that are up. However, when trying to connect to a remote server using RDP, the connection fails. Which action resolves this issue?
A. Add RDP port to the extended ACL.
B. Replace certificate on the RDP server.
C. Adjust the MTU size within the routers.
D. Change DMVPN timeout values.
Answer: B
NEW QUESTION: 4
You manage a cloud service that has a web application named WebRole1.
WebRole1 writes error messages to the Windows Event Log.
Users report receiving an error page with the following message: "Event 26 has occurred.
Contact your system administrator."
You need to access the WebRole1 event log.
Which three actions should you perform? Each correct answer presents part of the solution.
A. Run the Enable-AzureWebsiteApplicationDiagnostic PowerShell cmdlet.
B. Create a storage account.
C. Update the cloud service definition file and the service configuration file.
D. Enable verbose monitoring.
E. Update the WebRole1 web.config file.
F. Run the Set-AzureVMDiagnosticsExtensionPowerShell cmdlet.
Answer: B,C,D
Explanation:
step 1 specify the scheduled TransferLogLevelFilter to Verbose in the diagnostics.wadcfg step 2 Update the cloud service definition file and the service configuration file (.cspkg) step 3 best practice is to create a separate storage account for logging diagnostics data
References: http://azure.microsoft.com/en-us/documentation/articles/cloud-services-how-to-monitor/
E. _65503.?$
F. _65503_
Answer: A
Explanation:
http://www.cisco.com/c/en/us/td/docs/ios/12_2/termserv/configuration/guide/ftersv_c/tcfaap re.html
NEW QUESTION: 3
An engineer has integrated a new DMVPN to link remote offices across the internet using Cisco IOS routers. When connecting to remote sites, pings and voice data appear to flow properly and all tunnel stats seem to show that are up. However, when trying to connect to a remote server using RDP, the connection fails. Which action resolves this issue?
A. Add RDP port to the extended ACL.
B. Replace certificate on the RDP server.
C. Adjust the MTU size within the routers.
D. Change DMVPN timeout values.
Answer: B
NEW QUESTION: 4
You manage a cloud service that has a web application named WebRole1.
WebRole1 writes error messages to the Windows Event Log.
Users report receiving an error page with the following message: "Event 26 has occurred.
Contact your system administrator."
You need to access the WebRole1 event log.
Which three actions should you perform? Each correct answer presents part of the solution.
A. Run the Enable-AzureWebsiteApplicationDiagnostic PowerShell cmdlet.
B. Create a storage account.
C. Update the cloud service definition file and the service configuration file.
D. Enable verbose monitoring.
E. Update the WebRole1 web.config file.
F. Run the Set-AzureVMDiagnosticsExtensionPowerShell cmdlet.
Answer: B,C,D
Explanation:
step 1 specify the scheduled TransferLogLevelFilter to Verbose in the diagnostics.wadcfg step 2 Update the cloud service definition file and the service configuration file (.cspkg) step 3 best practice is to create a separate storage account for logging diagnostics data
References: http://azure.microsoft.com/en-us/documentation/articles/cloud-services-how-to-monitor/
This is more than a HP2-I57 65503$
E. _65503.?$
F. _65503_
Answer: A
Explanation:
http://www.cisco.com/c/en/us/td/docs/ios/12_2/termserv/configuration/guide/ftersv_c/tcfaap re.html
NEW QUESTION: 3
An engineer has integrated a new DMVPN to link remote offices across the internet using Cisco IOS routers. When connecting to remote sites, pings and voice data appear to flow properly and all tunnel stats seem to show that are up. However, when trying to connect to a remote server using RDP, the connection fails. Which action resolves this issue?
A. Add RDP port to the extended ACL.
B. Replace certificate on the RDP server.
C. Adjust the MTU size within the routers.
D. Change DMVPN timeout values.
Answer: B
NEW QUESTION: 4
You manage a cloud service that has a web application named WebRole1.
WebRole1 writes error messages to the Windows Event Log.
Users report receiving an error page with the following message: "Event 26 has occurred.
Contact your system administrator."
You need to access the WebRole1 event log.
Which three actions should you perform? Each correct answer presents part of the solution.
A. Run the Enable-AzureWebsiteApplicationDiagnostic PowerShell cmdlet.
B. Create a storage account.
C. Update the cloud service definition file and the service configuration file.
D. Enable verbose monitoring.
E. Update the WebRole1 web.config file.
F. Run the Set-AzureVMDiagnosticsExtensionPowerShell cmdlet.
Answer: B,C,D
Explanation:
step 1 specify the scheduled TransferLogLevelFilter to Verbose in the diagnostics.wadcfg step 2 Update the cloud service definition file and the service configuration file (.cspkg) step 3 best practice is to create a separate storage account for logging diagnostics data
References: http://azure.microsoft.com/en-us/documentation/articles/cloud-services-how-to-monitor/
- D-PST-DY-23 Test Dump
- C_THR97_2305 New Soft Simulations
- Public-Sector-Solutions Interactive Practice Exam
- JavaScript-Developer-I Test Questions
- Study 1z0-997-22 Demo
- UiPath-ASAPv1 Reliable Test Pattern
- Demo 300-430 Test
- New DP-203-KR Exam Dumps
- AD0-E716 Exam Test
- MB-240 Reliable Test Sims
- Exam Dumps Salesforce-Data-Cloud Collection
- NS0-593 Practice Engine
- Certification DA-100 Test Answers
- New Exam PDII Braindumps
- Valid Test PL-900-KR Bootcamp
- C_S4CPR_2402 Latest Test Questions
- D-PM-IN-23 Valid Exam Voucher
- Exam Dumps HPE0-V26 Pdf
- HP2-I73 Detail Explanation
- Exam B2B-Commerce-Administrator Quiz
- Latest D-PDM-DY-23 Learning Material
- CSCP Exam Engine
- PL-300-KR Reliable Study Guide
- QSDA2024 Valid Test Discount
E. _65503.?$
F. _65503_
Answer: A
Explanation:
http://www.cisco.com/c/en/us/td/docs/ios/12_2/termserv/configuration/guide/ftersv_c/tcfaap re.html
NEW QUESTION: 3
An engineer has integrated a new DMVPN to link remote offices across the internet using Cisco IOS routers. When connecting to remote sites, pings and voice data appear to flow properly and all tunnel stats seem to show that are up. However, when trying to connect to a remote server using RDP, the connection fails. Which action resolves this issue?
A. Add RDP port to the extended ACL.
B. Replace certificate on the RDP server.
C. Adjust the MTU size within the routers.
D. Change DMVPN timeout values.
Answer: B
NEW QUESTION: 4
You manage a cloud service that has a web application named WebRole1.
WebRole1 writes error messages to the Windows Event Log.
Users report receiving an error page with the following message: "Event 26 has occurred.
Contact your system administrator."
You need to access the WebRole1 event log.
Which three actions should you perform? Each correct answer presents part of the solution.
A. Run the Enable-AzureWebsiteApplicationDiagnostic PowerShell cmdlet.
B. Create a storage account.
C. Update the cloud service definition file and the service configuration file.
D. Enable verbose monitoring.
E. Update the WebRole1 web.config file.
F. Run the Set-AzureVMDiagnosticsExtensionPowerShell cmdlet.
Answer: B,C,D
Explanation:
step 1 specify the scheduled TransferLogLevelFilter to Verbose in the diagnostics.wadcfg step 2 Update the cloud service definition file and the service configuration file (.cspkg) step 3 best practice is to create a separate storage account for logging diagnostics data
References: http://azure.microsoft.com/en-us/documentation/articles/cloud-services-how-to-monitor/
E. _65503.?$
F. _65503_
Answer: A
Explanation:
http://www.cisco.com/c/en/us/td/docs/ios/12_2/termserv/configuration/guide/ftersv_c/tcfaap re.html
NEW QUESTION: 3
An engineer has integrated a new DMVPN to link remote offices across the internet using Cisco IOS routers. When connecting to remote sites, pings and voice data appear to flow properly and all tunnel stats seem to show that are up. However, when trying to connect to a remote server using RDP, the connection fails. Which action resolves this issue?
A. Add RDP port to the extended ACL.
B. Replace certificate on the RDP server.
C. Adjust the MTU size within the routers.
D. Change DMVPN timeout values.
Answer: B
NEW QUESTION: 4
You manage a cloud service that has a web application named WebRole1.
WebRole1 writes error messages to the Windows Event Log.
Users report receiving an error page with the following message: "Event 26 has occurred.
Contact your system administrator."
You need to access the WebRole1 event log.
Which three actions should you perform? Each correct answer presents part of the solution.
A. Run the Enable-AzureWebsiteApplicationDiagnostic PowerShell cmdlet.
B. Create a storage account.
C. Update the cloud service definition file and the service configuration file.
D. Enable verbose monitoring.
E. Update the WebRole1 web.config file.
F. Run the Set-AzureVMDiagnosticsExtensionPowerShell cmdlet.
Answer: B,C,D
Explanation:
step 1 specify the scheduled TransferLogLevelFilter to Verbose in the diagnostics.wadcfg step 2 Update the cloud service definition file and the service configuration file (.cspkg) step 3 best practice is to create a separate storage account for logging diagnostics data
References: http://azure.microsoft.com/en-us/documentation/articles/cloud-services-how-to-monitor/
HP HP2-I57 Valid Braindumps Ppt It will only take you 1-2 days to finish the dumps VCE pdf and recite them before the exam, Our experts have distilled the crucial points of the exam into our HP2-I57 training materials by integrating all useful content into them, HP HP2-I57 Valid Braindumps Ppt Just try and you will love them, HP HP2-I57 Valid Braindumps Ppt Well begun is half done.
Executives need to spend just a few days in the trenches with their technical C_C4H56I_34 Reliable Test Cost staff to get the true picture, Downloading and Installing Turbo Lister, When you're ready to get started, click one of those links.
Our HP2-I57 certification training materials will be a good option for you, Touch to close the camera settings, The List Interface, In order to focus a depth map around AWS-Security-Specialty Valid Dumps Ebook an appropriate area, you may choose to use spotlights instead of a directional light.
This may, in turn, increase the consumer appetite for complex products HP2-I57 Valid Braindumps Ppt that have the above three elements, Then she cranked up the volume on the viewport and laughed as everyone's speakers screamed with feedback.
When teams are staffed with quality over quantity in mind, they HP2-I57 Valid Braindumps Ppt can be both skilled and lean, Open the manifest.xml file, As a result, the program will continue when a null is encountered.
High Hit-Rate HP - HP2-I57 - Selling HP Lifecycle Services for Workforce Computing 2024 Valid Braindumps Ppt
Grounded, ground loop, One or more of the frames may contain a tiny, tiny scroll https://troytec.validtorrent.com/HP2-I57-valid-exam-torrent.html bar at the top, It is difficult to get the attention of review sites because so many developers are requesting reviews, but you should still submit to them.
The Design Method will teach you a proven, repeatable process for Latest OGEA-10B Braindumps Questions solving visual communication problems, It will only take you 1-2 days to finish the dumps VCE pdf and recite them before the exam.
Our experts have distilled the crucial points of the exam into our HP2-I57 training materials by integrating all useful content into them, Just try and you will love them.
Well begun is half done, Besides, the HP2-I57 free demo must be the best reference for your assessment, Just think that, you only need to spend some money, you can get a certificate as well as improve your ability.
It’s a critical question for you, Come and buy our HP2-I57 exam materials, you will get more than you can imagine, The content of the HP2-I57 training guide is the real questions and Detailed ANS-C01 Study Plan answers which are always kept to be the latest according to the efforts of the professionals.
HP2-I57 Valid Braindumps Ppt | High Pass-Rate HP2-I57 Latest Braindumps Questions: Selling HP Lifecycle Services for Workforce Computing 2024
However, with the help of the best training materials, you can completely pass HP HP2-I57 test in a short period of time, Especially those who study while working, you can save a lot of time easily.
Using Ce-Isareti can quickly help you get the https://pass4sure.itexamdownload.com/HP2-I57-valid-questions.html certificate you want, Every subtle change in the mainstream of the knowledge about the HP2-I57 certification will be caught and we try our best to search the HP2-I57 study materials resources available to us.
Passing HP2-I57 can be hard, and you won’t find such exam HP2-I57 brain dumps anywhere, We are professional and authoritative exam dumps seller in this field.
Our website is a professional certification dumps provider that offer candidates HP HP2-I57 valid vce and HP2-I57 exam pdf for achieving success in an effective way in the HP2-I57 valid exam.
NEW QUESTION: 1
Which three are advantages of the Java exception mechanism?
A. Allows the creation of new exceptions that are tailored to the particular program being created
B. Provides a set of standard exceptions that covers all the possible errors
C. Improves the program structure because exceptions must be handled in the method in which they occurred
D. Improves the program structure because the error handling code is separated from the normal program function
E. Improves the program structure because the programmer can choose where to handle exceptions
Answer: A,D,E
Explanation:
B is false. Standard exceptions not cover all possible errors. D is false. Exceptions don't have to be handled in the method in which they occurred.
NEW QUESTION: 2
Which as-path access-list regular expression should be applied on R2 as a neighbor filter list to only allow updates with an origin of AS 65503?
Refer to the exhibit.
A.
What will you get with your purchase of the Unlimited Access Package for only $149.00?
- An overview of the HP2-I57 65503$
E. _65503.?$
F. _65503_
Answer: A
Explanation:
http://www.cisco.com/c/en/us/td/docs/ios/12_2/termserv/configuration/guide/ftersv_c/tcfaap re.htmlNEW QUESTION: 3
An engineer has integrated a new DMVPN to link remote offices across the internet using Cisco IOS routers. When connecting to remote sites, pings and voice data appear to flow properly and all tunnel stats seem to show that are up. However, when trying to connect to a remote server using RDP, the connection fails. Which action resolves this issue?
A. Add RDP port to the extended ACL.
B. Replace certificate on the RDP server.
C. Adjust the MTU size within the routers.
D. Change DMVPN timeout values.
Answer: BNEW QUESTION: 4
course through studying the questions and answers.
You manage a cloud service that has a web application named WebRole1.
WebRole1 writes error messages to the Windows Event Log.
Users report receiving an error page with the following message: "Event 26 has occurred.
Contact your system administrator."
You need to access the WebRole1 event log.
Which three actions should you perform? Each correct answer presents part of the solution.
A. Run the Enable-AzureWebsiteApplicationDiagnostic PowerShell cmdlet.
B. Create a storage account.
C. Update the cloud service definition file and the service configuration file.
D. Enable verbose monitoring.
E. Update the WebRole1 web.config file.
F. Run the Set-AzureVMDiagnosticsExtensionPowerShell cmdlet.
Answer: B,C,D
Explanation:
step 1 specify the scheduled TransferLogLevelFilter to Verbose in the diagnostics.wadcfg step 2 Update the cloud service definition file and the service configuration file (.cspkg) step 3 best practice is to create a separate storage account for logging diagnostics data
References: http://azure.microsoft.com/en-us/documentation/articles/cloud-services-how-to-monitor/ - A preview of actual HP2-I57 65503$
E. _65503.?$
F. _65503_
Answer: A
Explanation:
http://www.cisco.com/c/en/us/td/docs/ios/12_2/termserv/configuration/guide/ftersv_c/tcfaap re.htmlNEW QUESTION: 3
An engineer has integrated a new DMVPN to link remote offices across the internet using Cisco IOS routers. When connecting to remote sites, pings and voice data appear to flow properly and all tunnel stats seem to show that are up. However, when trying to connect to a remote server using RDP, the connection fails. Which action resolves this issue?
A. Add RDP port to the extended ACL.
B. Replace certificate on the RDP server.
C. Adjust the MTU size within the routers.
D. Change DMVPN timeout values.
Answer: BNEW QUESTION: 4
test questions
You manage a cloud service that has a web application named WebRole1.
WebRole1 writes error messages to the Windows Event Log.
Users report receiving an error page with the following message: "Event 26 has occurred.
Contact your system administrator."
You need to access the WebRole1 event log.
Which three actions should you perform? Each correct answer presents part of the solution.
A. Run the Enable-AzureWebsiteApplicationDiagnostic PowerShell cmdlet.
B. Create a storage account.
C. Update the cloud service definition file and the service configuration file.
D. Enable verbose monitoring.
E. Update the WebRole1 web.config file.
F. Run the Set-AzureVMDiagnosticsExtensionPowerShell cmdlet.
Answer: B,C,D
Explanation:
step 1 specify the scheduled TransferLogLevelFilter to Verbose in the diagnostics.wadcfg step 2 Update the cloud service definition file and the service configuration file (.cspkg) step 3 best practice is to create a separate storage account for logging diagnostics data
References: http://azure.microsoft.com/en-us/documentation/articles/cloud-services-how-to-monitor/ - Actual correct HP2-I57 65503$
E. _65503.?$
F. _65503_
Answer: A
Explanation:
http://www.cisco.com/c/en/us/td/docs/ios/12_2/termserv/configuration/guide/ftersv_c/tcfaap re.htmlNEW QUESTION: 3
An engineer has integrated a new DMVPN to link remote offices across the internet using Cisco IOS routers. When connecting to remote sites, pings and voice data appear to flow properly and all tunnel stats seem to show that are up. However, when trying to connect to a remote server using RDP, the connection fails. Which action resolves this issue?
A. Add RDP port to the extended ACL.
B. Replace certificate on the RDP server.
C. Adjust the MTU size within the routers.
D. Change DMVPN timeout values.
Answer: BNEW QUESTION: 4
answers to the latest 65503$
You manage a cloud service that has a web application named WebRole1.
WebRole1 writes error messages to the Windows Event Log.
Users report receiving an error page with the following message: "Event 26 has occurred.
Contact your system administrator."
You need to access the WebRole1 event log.
Which three actions should you perform? Each correct answer presents part of the solution.
A. Run the Enable-AzureWebsiteApplicationDiagnostic PowerShell cmdlet.
B. Create a storage account.
C. Update the cloud service definition file and the service configuration file.
D. Enable verbose monitoring.
E. Update the WebRole1 web.config file.
F. Run the Set-AzureVMDiagnosticsExtensionPowerShell cmdlet.
Answer: B,C,D
Explanation:
step 1 specify the scheduled TransferLogLevelFilter to Verbose in the diagnostics.wadcfg step 2 Update the cloud service definition file and the service configuration file (.cspkg) step 3 best practice is to create a separate storage account for logging diagnostics data
References: http://azure.microsoft.com/en-us/documentation/articles/cloud-services-how-to-monitor/
E. _65503.?$
F. _65503_
Answer: A
Explanation:
http://www.cisco.com/c/en/us/td/docs/ios/12_2/termserv/configuration/guide/ftersv_c/tcfaap re.htmlNEW QUESTION: 3
An engineer has integrated a new DMVPN to link remote offices across the internet using Cisco IOS routers. When connecting to remote sites, pings and voice data appear to flow properly and all tunnel stats seem to show that are up. However, when trying to connect to a remote server using RDP, the connection fails. Which action resolves this issue?
A. Add RDP port to the extended ACL.
B. Replace certificate on the RDP server.
C. Adjust the MTU size within the routers.
D. Change DMVPN timeout values.
Answer: BNEW QUESTION: 4
questions
You manage a cloud service that has a web application named WebRole1.
WebRole1 writes error messages to the Windows Event Log.
Users report receiving an error page with the following message: "Event 26 has occurred.
Contact your system administrator."
You need to access the WebRole1 event log.
Which three actions should you perform? Each correct answer presents part of the solution.
A. Run the Enable-AzureWebsiteApplicationDiagnostic PowerShell cmdlet.
B. Create a storage account.
C. Update the cloud service definition file and the service configuration file.
D. Enable verbose monitoring.
E. Update the WebRole1 web.config file.
F. Run the Set-AzureVMDiagnosticsExtensionPowerShell cmdlet.
Answer: B,C,D
Explanation:
step 1 specify the scheduled TransferLogLevelFilter to Verbose in the diagnostics.wadcfg step 2 Update the cloud service definition file and the service configuration file (.cspkg) step 3 best practice is to create a separate storage account for logging diagnostics data
References: http://azure.microsoft.com/en-us/documentation/articles/cloud-services-how-to-monitor/
Our Unlimited Access Package will prepare you for your exam with guaranteed results, surpassing other HP2-I57 65503$
E. _65503.?$
F. _65503_
Answer: A
Explanation:
http://www.cisco.com/c/en/us/td/docs/ios/12_2/termserv/configuration/guide/ftersv_c/tcfaap re.html
NEW QUESTION: 3
An engineer has integrated a new DMVPN to link remote offices across the internet using Cisco IOS routers. When connecting to remote sites, pings and voice data appear to flow properly and all tunnel stats seem to show that are up. However, when trying to connect to a remote server using RDP, the connection fails. Which action resolves this issue?
A. Add RDP port to the extended ACL.
B. Replace certificate on the RDP server.
C. Adjust the MTU size within the routers.
D. Change DMVPN timeout values.
Answer: B
NEW QUESTION: 4
You manage a cloud service that has a web application named WebRole1.
WebRole1 writes error messages to the Windows Event Log.
Users report receiving an error page with the following message: "Event 26 has occurred.
Contact your system administrator."
You need to access the WebRole1 event log.
Which three actions should you perform? Each correct answer presents part of the solution.
A. Run the Enable-AzureWebsiteApplicationDiagnostic PowerShell cmdlet.
B. Create a storage account.
C. Update the cloud service definition file and the service configuration file.
D. Enable verbose monitoring.
E. Update the WebRole1 web.config file.
F. Run the Set-AzureVMDiagnosticsExtensionPowerShell cmdlet.
Answer: B,C,D
Explanation:
step 1 specify the scheduled TransferLogLevelFilter to Verbose in the diagnostics.wadcfg step 2 Update the cloud service definition file and the service configuration file (.cspkg) step 3 best practice is to create a separate storage account for logging diagnostics data
References: http://azure.microsoft.com/en-us/documentation/articles/cloud-services-how-to-monitor/
E. _65503.?$
F. _65503_
Answer: A
Explanation:
http://www.cisco.com/c/en/us/td/docs/ios/12_2/termserv/configuration/guide/ftersv_c/tcfaap re.html
NEW QUESTION: 3
An engineer has integrated a new DMVPN to link remote offices across the internet using Cisco IOS routers. When connecting to remote sites, pings and voice data appear to flow properly and all tunnel stats seem to show that are up. However, when trying to connect to a remote server using RDP, the connection fails. Which action resolves this issue?
A. Add RDP port to the extended ACL.
B. Replace certificate on the RDP server.
C. Adjust the MTU size within the routers.
D. Change DMVPN timeout values.
Answer: B
NEW QUESTION: 4
You manage a cloud service that has a web application named WebRole1.
WebRole1 writes error messages to the Windows Event Log.
Users report receiving an error page with the following message: "Event 26 has occurred.
Contact your system administrator."
You need to access the WebRole1 event log.
Which three actions should you perform? Each correct answer presents part of the solution.
A. Run the Enable-AzureWebsiteApplicationDiagnostic PowerShell cmdlet.
B. Create a storage account.
C. Update the cloud service definition file and the service configuration file.
D. Enable verbose monitoring.
E. Update the WebRole1 web.config file.
F. Run the Set-AzureVMDiagnosticsExtensionPowerShell cmdlet.
Answer: B,C,D
Explanation:
step 1 specify the scheduled TransferLogLevelFilter to Verbose in the diagnostics.wadcfg step 2 Update the cloud service definition file and the service configuration file (.cspkg) step 3 best practice is to create a separate storage account for logging diagnostics data
References: http://azure.microsoft.com/en-us/documentation/articles/cloud-services-how-to-monitor/
E. _65503.?$
F. _65503_
Answer: A
Explanation:
http://www.cisco.com/c/en/us/td/docs/ios/12_2/termserv/configuration/guide/ftersv_c/tcfaap re.html
NEW QUESTION: 3
An engineer has integrated a new DMVPN to link remote offices across the internet using Cisco IOS routers. When connecting to remote sites, pings and voice data appear to flow properly and all tunnel stats seem to show that are up. However, when trying to connect to a remote server using RDP, the connection fails. Which action resolves this issue?
A. Add RDP port to the extended ACL.
B. Replace certificate on the RDP server.
C. Adjust the MTU size within the routers.
D. Change DMVPN timeout values.
Answer: B
NEW QUESTION: 4
You manage a cloud service that has a web application named WebRole1.
WebRole1 writes error messages to the Windows Event Log.
Users report receiving an error page with the following message: "Event 26 has occurred.
Contact your system administrator."
You need to access the WebRole1 event log.
Which three actions should you perform? Each correct answer presents part of the solution.
A. Run the Enable-AzureWebsiteApplicationDiagnostic PowerShell cmdlet.
B. Create a storage account.
C. Update the cloud service definition file and the service configuration file.
D. Enable verbose monitoring.
E. Update the WebRole1 web.config file.
F. Run the Set-AzureVMDiagnosticsExtensionPowerShell cmdlet.
Answer: B,C,D
Explanation:
step 1 specify the scheduled TransferLogLevelFilter to Verbose in the diagnostics.wadcfg step 2 Update the cloud service definition file and the service configuration file (.cspkg) step 3 best practice is to create a separate storage account for logging diagnostics data
References: http://azure.microsoft.com/en-us/documentation/articles/cloud-services-how-to-monitor/
E. _65503.?$
F. _65503_
Answer: A
Explanation:
http://www.cisco.com/c/en/us/td/docs/ios/12_2/termserv/configuration/guide/ftersv_c/tcfaap re.html
NEW QUESTION: 3
An engineer has integrated a new DMVPN to link remote offices across the internet using Cisco IOS routers. When connecting to remote sites, pings and voice data appear to flow properly and all tunnel stats seem to show that are up. However, when trying to connect to a remote server using RDP, the connection fails. Which action resolves this issue?
A. Add RDP port to the extended ACL.
B. Replace certificate on the RDP server.
C. Adjust the MTU size within the routers.
D. Change DMVPN timeout values.
Answer: B
NEW QUESTION: 4
You manage a cloud service that has a web application named WebRole1.
WebRole1 writes error messages to the Windows Event Log.
Users report receiving an error page with the following message: "Event 26 has occurred.
Contact your system administrator."
You need to access the WebRole1 event log.
Which three actions should you perform? Each correct answer presents part of the solution.
A. Run the Enable-AzureWebsiteApplicationDiagnostic PowerShell cmdlet.
B. Create a storage account.
C. Update the cloud service definition file and the service configuration file.
D. Enable verbose monitoring.
E. Update the WebRole1 web.config file.
F. Run the Set-AzureVMDiagnosticsExtensionPowerShell cmdlet.
Answer: B,C,D
Explanation:
step 1 specify the scheduled TransferLogLevelFilter to Verbose in the diagnostics.wadcfg step 2 Update the cloud service definition file and the service configuration file (.cspkg) step 3 best practice is to create a separate storage account for logging diagnostics data
References: http://azure.microsoft.com/en-us/documentation/articles/cloud-services-how-to-monitor/
E. _65503.?$
F. _65503_
Answer: A
Explanation:
http://www.cisco.com/c/en/us/td/docs/ios/12_2/termserv/configuration/guide/ftersv_c/tcfaap re.html
NEW QUESTION: 3
An engineer has integrated a new DMVPN to link remote offices across the internet using Cisco IOS routers. When connecting to remote sites, pings and voice data appear to flow properly and all tunnel stats seem to show that are up. However, when trying to connect to a remote server using RDP, the connection fails. Which action resolves this issue?
A. Add RDP port to the extended ACL.
B. Replace certificate on the RDP server.
C. Adjust the MTU size within the routers.
D. Change DMVPN timeout values.
Answer: B
NEW QUESTION: 4
You manage a cloud service that has a web application named WebRole1.
WebRole1 writes error messages to the Windows Event Log.
Users report receiving an error page with the following message: "Event 26 has occurred.
Contact your system administrator."
You need to access the WebRole1 event log.
Which three actions should you perform? Each correct answer presents part of the solution.
A. Run the Enable-AzureWebsiteApplicationDiagnostic PowerShell cmdlet.
B. Create a storage account.
C. Update the cloud service definition file and the service configuration file.
D. Enable verbose monitoring.
E. Update the WebRole1 web.config file.
F. Run the Set-AzureVMDiagnosticsExtensionPowerShell cmdlet.
Answer: B,C,D
Explanation:
step 1 specify the scheduled TransferLogLevelFilter to Verbose in the diagnostics.wadcfg step 2 Update the cloud service definition file and the service configuration file (.cspkg) step 3 best practice is to create a separate storage account for logging diagnostics data
References: http://azure.microsoft.com/en-us/documentation/articles/cloud-services-how-to-monitor/
E. _65503.?$
F. _65503_
Answer: A
Explanation:
http://www.cisco.com/c/en/us/td/docs/ios/12_2/termserv/configuration/guide/ftersv_c/tcfaap re.html
NEW QUESTION: 3
An engineer has integrated a new DMVPN to link remote offices across the internet using Cisco IOS routers. When connecting to remote sites, pings and voice data appear to flow properly and all tunnel stats seem to show that are up. However, when trying to connect to a remote server using RDP, the connection fails. Which action resolves this issue?
A. Add RDP port to the extended ACL.
B. Replace certificate on the RDP server.
C. Adjust the MTU size within the routers.
D. Change DMVPN timeout values.
Answer: B
NEW QUESTION: 4
You manage a cloud service that has a web application named WebRole1.
WebRole1 writes error messages to the Windows Event Log.
Users report receiving an error page with the following message: "Event 26 has occurred.
Contact your system administrator."
You need to access the WebRole1 event log.
Which three actions should you perform? Each correct answer presents part of the solution.
A. Run the Enable-AzureWebsiteApplicationDiagnostic PowerShell cmdlet.
B. Create a storage account.
C. Update the cloud service definition file and the service configuration file.
D. Enable verbose monitoring.
E. Update the WebRole1 web.config file.
F. Run the Set-AzureVMDiagnosticsExtensionPowerShell cmdlet.
Answer: B,C,D
Explanation:
step 1 specify the scheduled TransferLogLevelFilter to Verbose in the diagnostics.wadcfg step 2 Update the cloud service definition file and the service configuration file (.cspkg) step 3 best practice is to create a separate storage account for logging diagnostics data
References: http://azure.microsoft.com/en-us/documentation/articles/cloud-services-how-to-monitor/
Skip all the worthless HP2-I57 65503$
E. _65503.?$
F. _65503_
Answer: A
Explanation:
http://www.cisco.com/c/en/us/td/docs/ios/12_2/termserv/configuration/guide/ftersv_c/tcfaap re.html
NEW QUESTION: 3
An engineer has integrated a new DMVPN to link remote offices across the internet using Cisco IOS routers. When connecting to remote sites, pings and voice data appear to flow properly and all tunnel stats seem to show that are up. However, when trying to connect to a remote server using RDP, the connection fails. Which action resolves this issue?
A. Add RDP port to the extended ACL.
B. Replace certificate on the RDP server.
C. Adjust the MTU size within the routers.
D. Change DMVPN timeout values.
Answer: B
NEW QUESTION: 4
You manage a cloud service that has a web application named WebRole1.
WebRole1 writes error messages to the Windows Event Log.
Users report receiving an error page with the following message: "Event 26 has occurred.
Contact your system administrator."
You need to access the WebRole1 event log.
Which three actions should you perform? Each correct answer presents part of the solution.
A. Run the Enable-AzureWebsiteApplicationDiagnostic PowerShell cmdlet.
B. Create a storage account.
C. Update the cloud service definition file and the service configuration file.
D. Enable verbose monitoring.
E. Update the WebRole1 web.config file.
F. Run the Set-AzureVMDiagnosticsExtensionPowerShell cmdlet.
Answer: B,C,D
Explanation:
step 1 specify the scheduled TransferLogLevelFilter to Verbose in the diagnostics.wadcfg step 2 Update the cloud service definition file and the service configuration file (.cspkg) step 3 best practice is to create a separate storage account for logging diagnostics data
References: http://azure.microsoft.com/en-us/documentation/articles/cloud-services-how-to-monitor/
- D-PST-DY-23 Test Dump
- C_THR97_2305 New Soft Simulations
- Public-Sector-Solutions Interactive Practice Exam
- JavaScript-Developer-I Test Questions
- Study 1z0-997-22 Demo
- UiPath-ASAPv1 Reliable Test Pattern
- Demo 300-430 Test
- New DP-203-KR Exam Dumps
- AD0-E716 Exam Test
- MB-240 Reliable Test Sims
- Exam Dumps Salesforce-Data-Cloud Collection
- NS0-593 Practice Engine
- Certification DA-100 Test Answers
- New Exam PDII Braindumps
- Valid Test PL-900-KR Bootcamp
- C_S4CPR_2402 Latest Test Questions
- D-PM-IN-23 Valid Exam Voucher
- Exam Dumps HPE0-V26 Pdf
- HP2-I73 Detail Explanation
- Exam B2B-Commerce-Administrator Quiz
- Latest D-PDM-DY-23 Learning Material
- CSCP Exam Engine
- PL-300-KR Reliable Study Guide
- QSDA2024 Valid Test Discount
65503$
E. _65503.?$
F. _65503_
Answer: A
Explanation:
http://www.cisco.com/c/en/us/td/docs/ios/12_2/termserv/configuration/guide/ftersv_c/tcfaap re.html
NEW QUESTION: 3
An engineer has integrated a new DMVPN to link remote offices across the internet using Cisco IOS routers. When connecting to remote sites, pings and voice data appear to flow properly and all tunnel stats seem to show that are up. However, when trying to connect to a remote server using RDP, the connection fails. Which action resolves this issue?
A. Add RDP port to the extended ACL.
B. Replace certificate on the RDP server.
C. Adjust the MTU size within the routers.
D. Change DMVPN timeout values.
Answer: B
NEW QUESTION: 4
You manage a cloud service that has a web application named WebRole1.
WebRole1 writes error messages to the Windows Event Log.
Users report receiving an error page with the following message: "Event 26 has occurred.
Contact your system administrator."
You need to access the WebRole1 event log.
Which three actions should you perform? Each correct answer presents part of the solution.
A. Run the Enable-AzureWebsiteApplicationDiagnostic PowerShell cmdlet.
B. Create a storage account.
C. Update the cloud service definition file and the service configuration file.
D. Enable verbose monitoring.
E. Update the WebRole1 web.config file.
F. Run the Set-AzureVMDiagnosticsExtensionPowerShell cmdlet.
Answer: B,C,D
Explanation:
step 1 specify the scheduled TransferLogLevelFilter to Verbose in the diagnostics.wadcfg step 2 Update the cloud service definition file and the service configuration file (.cspkg) step 3 best practice is to create a separate storage account for logging diagnostics data
References: http://azure.microsoft.com/en-us/documentation/articles/cloud-services-how-to-monitor/
Difficulty finding the right HP2-I57 65503$
E. _65503.?$
F. _65503_
Answer: A
Explanation:
http://www.cisco.com/c/en/us/td/docs/ios/12_2/termserv/configuration/guide/ftersv_c/tcfaap re.html
NEW QUESTION: 3
An engineer has integrated a new DMVPN to link remote offices across the internet using Cisco IOS routers. When connecting to remote sites, pings and voice data appear to flow properly and all tunnel stats seem to show that are up. However, when trying to connect to a remote server using RDP, the connection fails. Which action resolves this issue?
A. Add RDP port to the extended ACL.
B. Replace certificate on the RDP server.
C. Adjust the MTU size within the routers.
D. Change DMVPN timeout values.
Answer: B
NEW QUESTION: 4
You manage a cloud service that has a web application named WebRole1.
WebRole1 writes error messages to the Windows Event Log.
Users report receiving an error page with the following message: "Event 26 has occurred.
Contact your system administrator."
You need to access the WebRole1 event log.
Which three actions should you perform? Each correct answer presents part of the solution.
A. Run the Enable-AzureWebsiteApplicationDiagnostic PowerShell cmdlet.
B. Create a storage account.
C. Update the cloud service definition file and the service configuration file.
D. Enable verbose monitoring.
E. Update the WebRole1 web.config file.
F. Run the Set-AzureVMDiagnosticsExtensionPowerShell cmdlet.
Answer: B,C,D
Explanation:
step 1 specify the scheduled TransferLogLevelFilter to Verbose in the diagnostics.wadcfg step 2 Update the cloud service definition file and the service configuration file (.cspkg) step 3 best practice is to create a separate storage account for logging diagnostics data
References: http://azure.microsoft.com/en-us/documentation/articles/cloud-services-how-to-monitor/
E. _65503.?$
F. _65503_
Answer: A
Explanation:
http://www.cisco.com/c/en/us/td/docs/ios/12_2/termserv/configuration/guide/ftersv_c/tcfaap re.html
NEW QUESTION: 3
An engineer has integrated a new DMVPN to link remote offices across the internet using Cisco IOS routers. When connecting to remote sites, pings and voice data appear to flow properly and all tunnel stats seem to show that are up. However, when trying to connect to a remote server using RDP, the connection fails. Which action resolves this issue?
A. Add RDP port to the extended ACL.
B. Replace certificate on the RDP server.
C. Adjust the MTU size within the routers.
D. Change DMVPN timeout values.
Answer: B
NEW QUESTION: 4
You manage a cloud service that has a web application named WebRole1.
WebRole1 writes error messages to the Windows Event Log.
Users report receiving an error page with the following message: "Event 26 has occurred.
Contact your system administrator."
You need to access the WebRole1 event log.
Which three actions should you perform? Each correct answer presents part of the solution.
A. Run the Enable-AzureWebsiteApplicationDiagnostic PowerShell cmdlet.
B. Create a storage account.
C. Update the cloud service definition file and the service configuration file.
D. Enable verbose monitoring.
E. Update the WebRole1 web.config file.
F. Run the Set-AzureVMDiagnosticsExtensionPowerShell cmdlet.
Answer: B,C,D
Explanation:
step 1 specify the scheduled TransferLogLevelFilter to Verbose in the diagnostics.wadcfg step 2 Update the cloud service definition file and the service configuration file (.cspkg) step 3 best practice is to create a separate storage account for logging diagnostics data
References: http://azure.microsoft.com/en-us/documentation/articles/cloud-services-how-to-monitor/
E. _65503.?$
F. _65503_
Answer: A
Explanation:
http://www.cisco.com/c/en/us/td/docs/ios/12_2/termserv/configuration/guide/ftersv_c/tcfaap re.html
NEW QUESTION: 3
An engineer has integrated a new DMVPN to link remote offices across the internet using Cisco IOS routers. When connecting to remote sites, pings and voice data appear to flow properly and all tunnel stats seem to show that are up. However, when trying to connect to a remote server using RDP, the connection fails. Which action resolves this issue?
A. Add RDP port to the extended ACL.
B. Replace certificate on the RDP server.
C. Adjust the MTU size within the routers.
D. Change DMVPN timeout values.
Answer: B
NEW QUESTION: 4
You manage a cloud service that has a web application named WebRole1.
WebRole1 writes error messages to the Windows Event Log.
Users report receiving an error page with the following message: "Event 26 has occurred.
Contact your system administrator."
You need to access the WebRole1 event log.
Which three actions should you perform? Each correct answer presents part of the solution.
A. Run the Enable-AzureWebsiteApplicationDiagnostic PowerShell cmdlet.
B. Create a storage account.
C. Update the cloud service definition file and the service configuration file.
D. Enable verbose monitoring.
E. Update the WebRole1 web.config file.
F. Run the Set-AzureVMDiagnosticsExtensionPowerShell cmdlet.
Answer: B,C,D
Explanation:
step 1 specify the scheduled TransferLogLevelFilter to Verbose in the diagnostics.wadcfg step 2 Update the cloud service definition file and the service configuration file (.cspkg) step 3 best practice is to create a separate storage account for logging diagnostics data
References: http://azure.microsoft.com/en-us/documentation/articles/cloud-services-how-to-monitor/
E. _65503.?$
F. _65503_
Answer: A
Explanation:
http://www.cisco.com/c/en/us/td/docs/ios/12_2/termserv/configuration/guide/ftersv_c/tcfaap re.html
NEW QUESTION: 3
An engineer has integrated a new DMVPN to link remote offices across the internet using Cisco IOS routers. When connecting to remote sites, pings and voice data appear to flow properly and all tunnel stats seem to show that are up. However, when trying to connect to a remote server using RDP, the connection fails. Which action resolves this issue?
A. Add RDP port to the extended ACL.
B. Replace certificate on the RDP server.
C. Adjust the MTU size within the routers.
D. Change DMVPN timeout values.
Answer: B
NEW QUESTION: 4
You manage a cloud service that has a web application named WebRole1.
WebRole1 writes error messages to the Windows Event Log.
Users report receiving an error page with the following message: "Event 26 has occurred.
Contact your system administrator."
You need to access the WebRole1 event log.
Which three actions should you perform? Each correct answer presents part of the solution.
A. Run the Enable-AzureWebsiteApplicationDiagnostic PowerShell cmdlet.
B. Create a storage account.
C. Update the cloud service definition file and the service configuration file.
D. Enable verbose monitoring.
E. Update the WebRole1 web.config file.
F. Run the Set-AzureVMDiagnosticsExtensionPowerShell cmdlet.
Answer: B,C,D
Explanation:
step 1 specify the scheduled TransferLogLevelFilter to Verbose in the diagnostics.wadcfg step 2 Update the cloud service definition file and the service configuration file (.cspkg) step 3 best practice is to create a separate storage account for logging diagnostics data
References: http://azure.microsoft.com/en-us/documentation/articles/cloud-services-how-to-monitor/
- D-PST-DY-23 Test Dump
- C_THR97_2305 New Soft Simulations
- Public-Sector-Solutions Interactive Practice Exam
- JavaScript-Developer-I Test Questions
- Study 1z0-997-22 Demo
- UiPath-ASAPv1 Reliable Test Pattern
- Demo 300-430 Test
- New DP-203-KR Exam Dumps
- AD0-E716 Exam Test
- MB-240 Reliable Test Sims
- Exam Dumps Salesforce-Data-Cloud Collection
- NS0-593 Practice Engine
- Certification DA-100 Test Answers
- New Exam PDII Braindumps
- Valid Test PL-900-KR Bootcamp
- C_S4CPR_2402 Latest Test Questions
- D-PM-IN-23 Valid Exam Voucher
- Exam Dumps HPE0-V26 Pdf
- HP2-I73 Detail Explanation
- Exam B2B-Commerce-Administrator Quiz
- Latest D-PDM-DY-23 Learning Material
- CSCP Exam Engine
- PL-300-KR Reliable Study Guide
- QSDA2024 Valid Test Discount
E. _65503.?$
F. _65503_
Answer: A
Explanation:
http://www.cisco.com/c/en/us/td/docs/ios/12_2/termserv/configuration/guide/ftersv_c/tcfaap re.html
NEW QUESTION: 3
An engineer has integrated a new DMVPN to link remote offices across the internet using Cisco IOS routers. When connecting to remote sites, pings and voice data appear to flow properly and all tunnel stats seem to show that are up. However, when trying to connect to a remote server using RDP, the connection fails. Which action resolves this issue?
A. Add RDP port to the extended ACL.
B. Replace certificate on the RDP server.
C. Adjust the MTU size within the routers.
D. Change DMVPN timeout values.
Answer: B
NEW QUESTION: 4
You manage a cloud service that has a web application named WebRole1.
WebRole1 writes error messages to the Windows Event Log.
Users report receiving an error page with the following message: "Event 26 has occurred.
Contact your system administrator."
You need to access the WebRole1 event log.
Which three actions should you perform? Each correct answer presents part of the solution.
A. Run the Enable-AzureWebsiteApplicationDiagnostic PowerShell cmdlet.
B. Create a storage account.
C. Update the cloud service definition file and the service configuration file.
D. Enable verbose monitoring.
E. Update the WebRole1 web.config file.
F. Run the Set-AzureVMDiagnosticsExtensionPowerShell cmdlet.
Answer: B,C,D
Explanation:
step 1 specify the scheduled TransferLogLevelFilter to Verbose in the diagnostics.wadcfg step 2 Update the cloud service definition file and the service configuration file (.cspkg) step 3 best practice is to create a separate storage account for logging diagnostics data
References: http://azure.microsoft.com/en-us/documentation/articles/cloud-services-how-to-monitor/
- D-PST-DY-23 Test Dump
- C_THR97_2305 New Soft Simulations
- Public-Sector-Solutions Interactive Practice Exam
- JavaScript-Developer-I Test Questions
- Study 1z0-997-22 Demo
- UiPath-ASAPv1 Reliable Test Pattern
- Demo 300-430 Test
- New DP-203-KR Exam Dumps
- AD0-E716 Exam Test
- MB-240 Reliable Test Sims
- Exam Dumps Salesforce-Data-Cloud Collection
- NS0-593 Practice Engine
- Certification DA-100 Test Answers
- New Exam PDII Braindumps
- Valid Test PL-900-KR Bootcamp
- C_S4CPR_2402 Latest Test Questions
- D-PM-IN-23 Valid Exam Voucher
- Exam Dumps HPE0-V26 Pdf
- HP2-I73 Detail Explanation
- Exam B2B-Commerce-Administrator Quiz
- Latest D-PDM-DY-23 Learning Material
- CSCP Exam Engine
- PL-300-KR Reliable Study Guide
- QSDA2024 Valid Test Discount
E. _65503.?$
F. _65503_
Answer: A
Explanation:
http://www.cisco.com/c/en/us/td/docs/ios/12_2/termserv/configuration/guide/ftersv_c/tcfaap re.html
NEW QUESTION: 3
An engineer has integrated a new DMVPN to link remote offices across the internet using Cisco IOS routers. When connecting to remote sites, pings and voice data appear to flow properly and all tunnel stats seem to show that are up. However, when trying to connect to a remote server using RDP, the connection fails. Which action resolves this issue?
A. Add RDP port to the extended ACL.
B. Replace certificate on the RDP server.
C. Adjust the MTU size within the routers.
D. Change DMVPN timeout values.
Answer: B
NEW QUESTION: 4
You manage a cloud service that has a web application named WebRole1.
WebRole1 writes error messages to the Windows Event Log.
Users report receiving an error page with the following message: "Event 26 has occurred.
Contact your system administrator."
You need to access the WebRole1 event log.
Which three actions should you perform? Each correct answer presents part of the solution.
A. Run the Enable-AzureWebsiteApplicationDiagnostic PowerShell cmdlet.
B. Create a storage account.
C. Update the cloud service definition file and the service configuration file.
D. Enable verbose monitoring.
E. Update the WebRole1 web.config file.
F. Run the Set-AzureVMDiagnosticsExtensionPowerShell cmdlet.
Answer: B,C,D
Explanation:
step 1 specify the scheduled TransferLogLevelFilter to Verbose in the diagnostics.wadcfg step 2 Update the cloud service definition file and the service configuration file (.cspkg) step 3 best practice is to create a separate storage account for logging diagnostics data
References: http://azure.microsoft.com/en-us/documentation/articles/cloud-services-how-to-monitor/
E. _65503.?$
F. _65503_
Answer: A
Explanation:
http://www.cisco.com/c/en/us/td/docs/ios/12_2/termserv/configuration/guide/ftersv_c/tcfaap re.html
NEW QUESTION: 3
An engineer has integrated a new DMVPN to link remote offices across the internet using Cisco IOS routers. When connecting to remote sites, pings and voice data appear to flow properly and all tunnel stats seem to show that are up. However, when trying to connect to a remote server using RDP, the connection fails. Which action resolves this issue?
A. Add RDP port to the extended ACL.
B. Replace certificate on the RDP server.
C. Adjust the MTU size within the routers.
D. Change DMVPN timeout values.
Answer: B
NEW QUESTION: 4
You manage a cloud service that has a web application named WebRole1.
WebRole1 writes error messages to the Windows Event Log.
Users report receiving an error page with the following message: "Event 26 has occurred.
Contact your system administrator."
You need to access the WebRole1 event log.
Which three actions should you perform? Each correct answer presents part of the solution.
A. Run the Enable-AzureWebsiteApplicationDiagnostic PowerShell cmdlet.
B. Create a storage account.
C. Update the cloud service definition file and the service configuration file.
D. Enable verbose monitoring.
E. Update the WebRole1 web.config file.
F. Run the Set-AzureVMDiagnosticsExtensionPowerShell cmdlet.
Answer: B,C,D
Explanation:
step 1 specify the scheduled TransferLogLevelFilter to Verbose in the diagnostics.wadcfg step 2 Update the cloud service definition file and the service configuration file (.cspkg) step 3 best practice is to create a separate storage account for logging diagnostics data
References: http://azure.microsoft.com/en-us/documentation/articles/cloud-services-how-to-monitor/
E. _65503.?$
F. _65503_
Answer: A
Explanation:
http://www.cisco.com/c/en/us/td/docs/ios/12_2/termserv/configuration/guide/ftersv_c/tcfaap re.html
NEW QUESTION: 3
An engineer has integrated a new DMVPN to link remote offices across the internet using Cisco IOS routers. When connecting to remote sites, pings and voice data appear to flow properly and all tunnel stats seem to show that are up. However, when trying to connect to a remote server using RDP, the connection fails. Which action resolves this issue?
A. Add RDP port to the extended ACL.
B. Replace certificate on the RDP server.
C. Adjust the MTU size within the routers.
D. Change DMVPN timeout values.
Answer: B
NEW QUESTION: 4
You manage a cloud service that has a web application named WebRole1.
WebRole1 writes error messages to the Windows Event Log.
Users report receiving an error page with the following message: "Event 26 has occurred.
Contact your system administrator."
You need to access the WebRole1 event log.
Which three actions should you perform? Each correct answer presents part of the solution.
A. Run the Enable-AzureWebsiteApplicationDiagnostic PowerShell cmdlet.
B. Create a storage account.
C. Update the cloud service definition file and the service configuration file.
D. Enable verbose monitoring.
E. Update the WebRole1 web.config file.
F. Run the Set-AzureVMDiagnosticsExtensionPowerShell cmdlet.
Answer: B,C,D
Explanation:
step 1 specify the scheduled TransferLogLevelFilter to Verbose in the diagnostics.wadcfg step 2 Update the cloud service definition file and the service configuration file (.cspkg) step 3 best practice is to create a separate storage account for logging diagnostics data
References: http://azure.microsoft.com/en-us/documentation/articles/cloud-services-how-to-monitor/
65503$
E. _65503.?$
F. _65503_
Answer: A
Explanation:
http://www.cisco.com/c/en/us/td/docs/ios/12_2/termserv/configuration/guide/ftersv_c/tcfaap re.html
NEW QUESTION: 3
An engineer has integrated a new DMVPN to link remote offices across the internet using Cisco IOS routers. When connecting to remote sites, pings and voice data appear to flow properly and all tunnel stats seem to show that are up. However, when trying to connect to a remote server using RDP, the connection fails. Which action resolves this issue?
A. Add RDP port to the extended ACL.
B. Replace certificate on the RDP server.
C. Adjust the MTU size within the routers.
D. Change DMVPN timeout values.
Answer: B
NEW QUESTION: 4
You manage a cloud service that has a web application named WebRole1.
WebRole1 writes error messages to the Windows Event Log.
Users report receiving an error page with the following message: "Event 26 has occurred.
Contact your system administrator."
You need to access the WebRole1 event log.
Which three actions should you perform? Each correct answer presents part of the solution.
A. Run the Enable-AzureWebsiteApplicationDiagnostic PowerShell cmdlet.
B. Create a storage account.
C. Update the cloud service definition file and the service configuration file.
D. Enable verbose monitoring.
E. Update the WebRole1 web.config file.
F. Run the Set-AzureVMDiagnosticsExtensionPowerShell cmdlet.
Answer: B,C,D
Explanation:
step 1 specify the scheduled TransferLogLevelFilter to Verbose in the diagnostics.wadcfg step 2 Update the cloud service definition file and the service configuration file (.cspkg) step 3 best practice is to create a separate storage account for logging diagnostics data
References: http://azure.microsoft.com/en-us/documentation/articles/cloud-services-how-to-monitor/
Still searching for HP2-I57 65503$
E. _65503.?$
F. _65503_
Answer: A
Explanation:
http://www.cisco.com/c/en/us/td/docs/ios/12_2/termserv/configuration/guide/ftersv_c/tcfaap re.html
NEW QUESTION: 3
An engineer has integrated a new DMVPN to link remote offices across the internet using Cisco IOS routers. When connecting to remote sites, pings and voice data appear to flow properly and all tunnel stats seem to show that are up. However, when trying to connect to a remote server using RDP, the connection fails. Which action resolves this issue?
A. Add RDP port to the extended ACL.
B. Replace certificate on the RDP server.
C. Adjust the MTU size within the routers.
D. Change DMVPN timeout values.
Answer: B
NEW QUESTION: 4
You manage a cloud service that has a web application named WebRole1.
WebRole1 writes error messages to the Windows Event Log.
Users report receiving an error page with the following message: "Event 26 has occurred.
Contact your system administrator."
You need to access the WebRole1 event log.
Which three actions should you perform? Each correct answer presents part of the solution.
A. Run the Enable-AzureWebsiteApplicationDiagnostic PowerShell cmdlet.
B. Create a storage account.
C. Update the cloud service definition file and the service configuration file.
D. Enable verbose monitoring.
E. Update the WebRole1 web.config file.
F. Run the Set-AzureVMDiagnosticsExtensionPowerShell cmdlet.
Answer: B,C,D
Explanation:
step 1 specify the scheduled TransferLogLevelFilter to Verbose in the diagnostics.wadcfg step 2 Update the cloud service definition file and the service configuration file (.cspkg) step 3 best practice is to create a separate storage account for logging diagnostics data
References: http://azure.microsoft.com/en-us/documentation/articles/cloud-services-how-to-monitor/
E. _65503.?$
F. _65503_
Answer: A
Explanation:
http://www.cisco.com/c/en/us/td/docs/ios/12_2/termserv/configuration/guide/ftersv_c/tcfaap re.html
NEW QUESTION: 3
An engineer has integrated a new DMVPN to link remote offices across the internet using Cisco IOS routers. When connecting to remote sites, pings and voice data appear to flow properly and all tunnel stats seem to show that are up. However, when trying to connect to a remote server using RDP, the connection fails. Which action resolves this issue?
A. Add RDP port to the extended ACL.
B. Replace certificate on the RDP server.
C. Adjust the MTU size within the routers.
D. Change DMVPN timeout values.
Answer: B
NEW QUESTION: 4
You manage a cloud service that has a web application named WebRole1.
WebRole1 writes error messages to the Windows Event Log.
Users report receiving an error page with the following message: "Event 26 has occurred.
Contact your system administrator."
You need to access the WebRole1 event log.
Which three actions should you perform? Each correct answer presents part of the solution.
A. Run the Enable-AzureWebsiteApplicationDiagnostic PowerShell cmdlet.
B. Create a storage account.
C. Update the cloud service definition file and the service configuration file.
D. Enable verbose monitoring.
E. Update the WebRole1 web.config file.
F. Run the Set-AzureVMDiagnosticsExtensionPowerShell cmdlet.
Answer: B,C,D
Explanation:
step 1 specify the scheduled TransferLogLevelFilter to Verbose in the diagnostics.wadcfg step 2 Update the cloud service definition file and the service configuration file (.cspkg) step 3 best practice is to create a separate storage account for logging diagnostics data
References: http://azure.microsoft.com/en-us/documentation/articles/cloud-services-how-to-monitor/
E. _65503.?$
F. _65503_
Answer: A
Explanation:
http://www.cisco.com/c/en/us/td/docs/ios/12_2/termserv/configuration/guide/ftersv_c/tcfaap re.html
NEW QUESTION: 3
An engineer has integrated a new DMVPN to link remote offices across the internet using Cisco IOS routers. When connecting to remote sites, pings and voice data appear to flow properly and all tunnel stats seem to show that are up. However, when trying to connect to a remote server using RDP, the connection fails. Which action resolves this issue?
A. Add RDP port to the extended ACL.
B. Replace certificate on the RDP server.
C. Adjust the MTU size within the routers.
D. Change DMVPN timeout values.
Answer: B
NEW QUESTION: 4
You manage a cloud service that has a web application named WebRole1.
WebRole1 writes error messages to the Windows Event Log.
Users report receiving an error page with the following message: "Event 26 has occurred.
Contact your system administrator."
You need to access the WebRole1 event log.
Which three actions should you perform? Each correct answer presents part of the solution.
A. Run the Enable-AzureWebsiteApplicationDiagnostic PowerShell cmdlet.
B. Create a storage account.
C. Update the cloud service definition file and the service configuration file.
D. Enable verbose monitoring.
E. Update the WebRole1 web.config file.
F. Run the Set-AzureVMDiagnosticsExtensionPowerShell cmdlet.
Answer: B,C,D
Explanation:
step 1 specify the scheduled TransferLogLevelFilter to Verbose in the diagnostics.wadcfg step 2 Update the cloud service definition file and the service configuration file (.cspkg) step 3 best practice is to create a separate storage account for logging diagnostics data
References: http://azure.microsoft.com/en-us/documentation/articles/cloud-services-how-to-monitor/
E. _65503.?$
F. _65503_
Answer: A
Explanation:
http://www.cisco.com/c/en/us/td/docs/ios/12_2/termserv/configuration/guide/ftersv_c/tcfaap re.html
NEW QUESTION: 3
An engineer has integrated a new DMVPN to link remote offices across the internet using Cisco IOS routers. When connecting to remote sites, pings and voice data appear to flow properly and all tunnel stats seem to show that are up. However, when trying to connect to a remote server using RDP, the connection fails. Which action resolves this issue?
A. Add RDP port to the extended ACL.
B. Replace certificate on the RDP server.
C. Adjust the MTU size within the routers.
D. Change DMVPN timeout values.
Answer: B
NEW QUESTION: 4
You manage a cloud service that has a web application named WebRole1.
WebRole1 writes error messages to the Windows Event Log.
Users report receiving an error page with the following message: "Event 26 has occurred.
Contact your system administrator."
You need to access the WebRole1 event log.
Which three actions should you perform? Each correct answer presents part of the solution.
A. Run the Enable-AzureWebsiteApplicationDiagnostic PowerShell cmdlet.
B. Create a storage account.
C. Update the cloud service definition file and the service configuration file.
D. Enable verbose monitoring.
E. Update the WebRole1 web.config file.
F. Run the Set-AzureVMDiagnosticsExtensionPowerShell cmdlet.
Answer: B,C,D
Explanation:
step 1 specify the scheduled TransferLogLevelFilter to Verbose in the diagnostics.wadcfg step 2 Update the cloud service definition file and the service configuration file (.cspkg) step 3 best practice is to create a separate storage account for logging diagnostics data
References: http://azure.microsoft.com/en-us/documentation/articles/cloud-services-how-to-monitor/
E. _65503.?$
F. _65503_
Answer: A
Explanation:
http://www.cisco.com/c/en/us/td/docs/ios/12_2/termserv/configuration/guide/ftersv_c/tcfaap re.html
NEW QUESTION: 3
An engineer has integrated a new DMVPN to link remote offices across the internet using Cisco IOS routers. When connecting to remote sites, pings and voice data appear to flow properly and all tunnel stats seem to show that are up. However, when trying to connect to a remote server using RDP, the connection fails. Which action resolves this issue?
A. Add RDP port to the extended ACL.
B. Replace certificate on the RDP server.
C. Adjust the MTU size within the routers.
D. Change DMVPN timeout values.
Answer: B
NEW QUESTION: 4
You manage a cloud service that has a web application named WebRole1.
WebRole1 writes error messages to the Windows Event Log.
Users report receiving an error page with the following message: "Event 26 has occurred.
Contact your system administrator."
You need to access the WebRole1 event log.
Which three actions should you perform? Each correct answer presents part of the solution.
A. Run the Enable-AzureWebsiteApplicationDiagnostic PowerShell cmdlet.
B. Create a storage account.
C. Update the cloud service definition file and the service configuration file.
D. Enable verbose monitoring.
E. Update the WebRole1 web.config file.
F. Run the Set-AzureVMDiagnosticsExtensionPowerShell cmdlet.
Answer: B,C,D
Explanation:
step 1 specify the scheduled TransferLogLevelFilter to Verbose in the diagnostics.wadcfg step 2 Update the cloud service definition file and the service configuration file (.cspkg) step 3 best practice is to create a separate storage account for logging diagnostics data
References: http://azure.microsoft.com/en-us/documentation/articles/cloud-services-how-to-monitor/
E. _65503.?$
F. _65503_
Answer: A
Explanation:
http://www.cisco.com/c/en/us/td/docs/ios/12_2/termserv/configuration/guide/ftersv_c/tcfaap re.html
NEW QUESTION: 3
An engineer has integrated a new DMVPN to link remote offices across the internet using Cisco IOS routers. When connecting to remote sites, pings and voice data appear to flow properly and all tunnel stats seem to show that are up. However, when trying to connect to a remote server using RDP, the connection fails. Which action resolves this issue?
A. Add RDP port to the extended ACL.
B. Replace certificate on the RDP server.
C. Adjust the MTU size within the routers.
D. Change DMVPN timeout values.
Answer: B
NEW QUESTION: 4
You manage a cloud service that has a web application named WebRole1.
WebRole1 writes error messages to the Windows Event Log.
Users report receiving an error page with the following message: "Event 26 has occurred.
Contact your system administrator."
You need to access the WebRole1 event log.
Which three actions should you perform? Each correct answer presents part of the solution.
A. Run the Enable-AzureWebsiteApplicationDiagnostic PowerShell cmdlet.
B. Create a storage account.
C. Update the cloud service definition file and the service configuration file.
D. Enable verbose monitoring.
E. Update the WebRole1 web.config file.
F. Run the Set-AzureVMDiagnosticsExtensionPowerShell cmdlet.
Answer: B,C,D
Explanation:
step 1 specify the scheduled TransferLogLevelFilter to Verbose in the diagnostics.wadcfg step 2 Update the cloud service definition file and the service configuration file (.cspkg) step 3 best practice is to create a separate storage account for logging diagnostics data
References: http://azure.microsoft.com/en-us/documentation/articles/cloud-services-how-to-monitor/
E. _65503.?$
F. _65503_
Answer: A
Explanation:
http://www.cisco.com/c/en/us/td/docs/ios/12_2/termserv/configuration/guide/ftersv_c/tcfaap re.html
NEW QUESTION: 3
An engineer has integrated a new DMVPN to link remote offices across the internet using Cisco IOS routers. When connecting to remote sites, pings and voice data appear to flow properly and all tunnel stats seem to show that are up. However, when trying to connect to a remote server using RDP, the connection fails. Which action resolves this issue?
A. Add RDP port to the extended ACL.
B. Replace certificate on the RDP server.
C. Adjust the MTU size within the routers.
D. Change DMVPN timeout values.
Answer: B
NEW QUESTION: 4
You manage a cloud service that has a web application named WebRole1.
WebRole1 writes error messages to the Windows Event Log.
Users report receiving an error page with the following message: "Event 26 has occurred.
Contact your system administrator."
You need to access the WebRole1 event log.
Which three actions should you perform? Each correct answer presents part of the solution.
A. Run the Enable-AzureWebsiteApplicationDiagnostic PowerShell cmdlet.
B. Create a storage account.
C. Update the cloud service definition file and the service configuration file.
D. Enable verbose monitoring.
E. Update the WebRole1 web.config file.
F. Run the Set-AzureVMDiagnosticsExtensionPowerShell cmdlet.
Answer: B,C,D
Explanation:
step 1 specify the scheduled TransferLogLevelFilter to Verbose in the diagnostics.wadcfg step 2 Update the cloud service definition file and the service configuration file (.cspkg) step 3 best practice is to create a separate storage account for logging diagnostics data
References: http://azure.microsoft.com/en-us/documentation/articles/cloud-services-how-to-monitor/
65503$
E. _65503.?$
F. _65503_
Answer: A
Explanation:
http://www.cisco.com/c/en/us/td/docs/ios/12_2/termserv/configuration/guide/ftersv_c/tcfaap re.html
NEW QUESTION: 3
An engineer has integrated a new DMVPN to link remote offices across the internet using Cisco IOS routers. When connecting to remote sites, pings and voice data appear to flow properly and all tunnel stats seem to show that are up. However, when trying to connect to a remote server using RDP, the connection fails. Which action resolves this issue?
A. Add RDP port to the extended ACL.
B. Replace certificate on the RDP server.
C. Adjust the MTU size within the routers.
D. Change DMVPN timeout values.
Answer: B
NEW QUESTION: 4
You manage a cloud service that has a web application named WebRole1.
WebRole1 writes error messages to the Windows Event Log.
Users report receiving an error page with the following message: "Event 26 has occurred.
Contact your system administrator."
You need to access the WebRole1 event log.
Which three actions should you perform? Each correct answer presents part of the solution.
A. Run the Enable-AzureWebsiteApplicationDiagnostic PowerShell cmdlet.
B. Create a storage account.
C. Update the cloud service definition file and the service configuration file.
D. Enable verbose monitoring.
E. Update the WebRole1 web.config file.
F. Run the Set-AzureVMDiagnosticsExtensionPowerShell cmdlet.
Answer: B,C,D
Explanation:
step 1 specify the scheduled TransferLogLevelFilter to Verbose in the diagnostics.wadcfg step 2 Update the cloud service definition file and the service configuration file (.cspkg) step 3 best practice is to create a separate storage account for logging diagnostics data
References: http://azure.microsoft.com/en-us/documentation/articles/cloud-services-how-to-monitor/
Keep walking if all you want is free HP2-I57 65503$
E. _65503.?$
F. _65503_
Answer: A
Explanation:
http://www.cisco.com/c/en/us/td/docs/ios/12_2/termserv/configuration/guide/ftersv_c/tcfaap re.html
NEW QUESTION: 3
An engineer has integrated a new DMVPN to link remote offices across the internet using Cisco IOS routers. When connecting to remote sites, pings and voice data appear to flow properly and all tunnel stats seem to show that are up. However, when trying to connect to a remote server using RDP, the connection fails. Which action resolves this issue?
A. Add RDP port to the extended ACL.
B. Replace certificate on the RDP server.
C. Adjust the MTU size within the routers.
D. Change DMVPN timeout values.
Answer: B
NEW QUESTION: 4
You manage a cloud service that has a web application named WebRole1.
WebRole1 writes error messages to the Windows Event Log.
Users report receiving an error page with the following message: "Event 26 has occurred.
Contact your system administrator."
You need to access the WebRole1 event log.
Which three actions should you perform? Each correct answer presents part of the solution.
A. Run the Enable-AzureWebsiteApplicationDiagnostic PowerShell cmdlet.
B. Create a storage account.
C. Update the cloud service definition file and the service configuration file.
D. Enable verbose monitoring.
E. Update the WebRole1 web.config file.
F. Run the Set-AzureVMDiagnosticsExtensionPowerShell cmdlet.
Answer: B,C,D
Explanation:
step 1 specify the scheduled TransferLogLevelFilter to Verbose in the diagnostics.wadcfg step 2 Update the cloud service definition file and the service configuration file (.cspkg) step 3 best practice is to create a separate storage account for logging diagnostics data
References: http://azure.microsoft.com/en-us/documentation/articles/cloud-services-how-to-monitor/
E. _65503.?$
F. _65503_
Answer: A
Explanation:
http://www.cisco.com/c/en/us/td/docs/ios/12_2/termserv/configuration/guide/ftersv_c/tcfaap re.html
NEW QUESTION: 3
An engineer has integrated a new DMVPN to link remote offices across the internet using Cisco IOS routers. When connecting to remote sites, pings and voice data appear to flow properly and all tunnel stats seem to show that are up. However, when trying to connect to a remote server using RDP, the connection fails. Which action resolves this issue?
A. Add RDP port to the extended ACL.
B. Replace certificate on the RDP server.
C. Adjust the MTU size within the routers.
D. Change DMVPN timeout values.
Answer: B
NEW QUESTION: 4
You manage a cloud service that has a web application named WebRole1.
WebRole1 writes error messages to the Windows Event Log.
Users report receiving an error page with the following message: "Event 26 has occurred.
Contact your system administrator."
You need to access the WebRole1 event log.
Which three actions should you perform? Each correct answer presents part of the solution.
A. Run the Enable-AzureWebsiteApplicationDiagnostic PowerShell cmdlet.
B. Create a storage account.
C. Update the cloud service definition file and the service configuration file.
D. Enable verbose monitoring.
E. Update the WebRole1 web.config file.
F. Run the Set-AzureVMDiagnosticsExtensionPowerShell cmdlet.
Answer: B,C,D
Explanation:
step 1 specify the scheduled TransferLogLevelFilter to Verbose in the diagnostics.wadcfg step 2 Update the cloud service definition file and the service configuration file (.cspkg) step 3 best practice is to create a separate storage account for logging diagnostics data
References: http://azure.microsoft.com/en-us/documentation/articles/cloud-services-how-to-monitor/
- D-PST-DY-23 Test Dump
- C_THR97_2305 New Soft Simulations
- Public-Sector-Solutions Interactive Practice Exam
- JavaScript-Developer-I Test Questions
- Study 1z0-997-22 Demo
- UiPath-ASAPv1 Reliable Test Pattern
- Demo 300-430 Test
- New DP-203-KR Exam Dumps
- AD0-E716 Exam Test
- MB-240 Reliable Test Sims
- Exam Dumps Salesforce-Data-Cloud Collection
- NS0-593 Practice Engine
- Certification DA-100 Test Answers
- New Exam PDII Braindumps
- Valid Test PL-900-KR Bootcamp
- C_S4CPR_2402 Latest Test Questions
- D-PM-IN-23 Valid Exam Voucher
- Exam Dumps HPE0-V26 Pdf
- HP2-I73 Detail Explanation
- Exam B2B-Commerce-Administrator Quiz
- Latest D-PDM-DY-23 Learning Material
- CSCP Exam Engine
- PL-300-KR Reliable Study Guide
- QSDA2024 Valid Test Discount
E. _65503.?$
F. _65503_
Answer: A
Explanation:
http://www.cisco.com/c/en/us/td/docs/ios/12_2/termserv/configuration/guide/ftersv_c/tcfaap re.html
NEW QUESTION: 3
An engineer has integrated a new DMVPN to link remote offices across the internet using Cisco IOS routers. When connecting to remote sites, pings and voice data appear to flow properly and all tunnel stats seem to show that are up. However, when trying to connect to a remote server using RDP, the connection fails. Which action resolves this issue?
A. Add RDP port to the extended ACL.
B. Replace certificate on the RDP server.
C. Adjust the MTU size within the routers.
D. Change DMVPN timeout values.
Answer: B
NEW QUESTION: 4
You manage a cloud service that has a web application named WebRole1.
WebRole1 writes error messages to the Windows Event Log.
Users report receiving an error page with the following message: "Event 26 has occurred.
Contact your system administrator."
You need to access the WebRole1 event log.
Which three actions should you perform? Each correct answer presents part of the solution.
A. Run the Enable-AzureWebsiteApplicationDiagnostic PowerShell cmdlet.
B. Create a storage account.
C. Update the cloud service definition file and the service configuration file.
D. Enable verbose monitoring.
E. Update the WebRole1 web.config file.
F. Run the Set-AzureVMDiagnosticsExtensionPowerShell cmdlet.
Answer: B,C,D
Explanation:
step 1 specify the scheduled TransferLogLevelFilter to Verbose in the diagnostics.wadcfg step 2 Update the cloud service definition file and the service configuration file (.cspkg) step 3 best practice is to create a separate storage account for logging diagnostics data
References: http://azure.microsoft.com/en-us/documentation/articles/cloud-services-how-to-monitor/
E. _65503.?$
F. _65503_
Answer: A
Explanation:
http://www.cisco.com/c/en/us/td/docs/ios/12_2/termserv/configuration/guide/ftersv_c/tcfaap re.html
NEW QUESTION: 3
An engineer has integrated a new DMVPN to link remote offices across the internet using Cisco IOS routers. When connecting to remote sites, pings and voice data appear to flow properly and all tunnel stats seem to show that are up. However, when trying to connect to a remote server using RDP, the connection fails. Which action resolves this issue?
A. Add RDP port to the extended ACL.
B. Replace certificate on the RDP server.
C. Adjust the MTU size within the routers.
D. Change DMVPN timeout values.
Answer: B
NEW QUESTION: 4
You manage a cloud service that has a web application named WebRole1.
WebRole1 writes error messages to the Windows Event Log.
Users report receiving an error page with the following message: "Event 26 has occurred.
Contact your system administrator."
You need to access the WebRole1 event log.
Which three actions should you perform? Each correct answer presents part of the solution.
A. Run the Enable-AzureWebsiteApplicationDiagnostic PowerShell cmdlet.
B. Create a storage account.
C. Update the cloud service definition file and the service configuration file.
D. Enable verbose monitoring.
E. Update the WebRole1 web.config file.
F. Run the Set-AzureVMDiagnosticsExtensionPowerShell cmdlet.
Answer: B,C,D
Explanation:
step 1 specify the scheduled TransferLogLevelFilter to Verbose in the diagnostics.wadcfg step 2 Update the cloud service definition file and the service configuration file (.cspkg) step 3 best practice is to create a separate storage account for logging diagnostics data
References: http://azure.microsoft.com/en-us/documentation/articles/cloud-services-how-to-monitor/
E. _65503.?$
F. _65503_
Answer: A
Explanation:
http://www.cisco.com/c/en/us/td/docs/ios/12_2/termserv/configuration/guide/ftersv_c/tcfaap re.html
NEW QUESTION: 3
An engineer has integrated a new DMVPN to link remote offices across the internet using Cisco IOS routers. When connecting to remote sites, pings and voice data appear to flow properly and all tunnel stats seem to show that are up. However, when trying to connect to a remote server using RDP, the connection fails. Which action resolves this issue?
A. Add RDP port to the extended ACL.
B. Replace certificate on the RDP server.
C. Adjust the MTU size within the routers.
D. Change DMVPN timeout values.
Answer: B
NEW QUESTION: 4
You manage a cloud service that has a web application named WebRole1.
WebRole1 writes error messages to the Windows Event Log.
Users report receiving an error page with the following message: "Event 26 has occurred.
Contact your system administrator."
You need to access the WebRole1 event log.
Which three actions should you perform? Each correct answer presents part of the solution.
A. Run the Enable-AzureWebsiteApplicationDiagnostic PowerShell cmdlet.
B. Create a storage account.
C. Update the cloud service definition file and the service configuration file.
D. Enable verbose monitoring.
E. Update the WebRole1 web.config file.
F. Run the Set-AzureVMDiagnosticsExtensionPowerShell cmdlet.
Answer: B,C,D
Explanation:
step 1 specify the scheduled TransferLogLevelFilter to Verbose in the diagnostics.wadcfg step 2 Update the cloud service definition file and the service configuration file (.cspkg) step 3 best practice is to create a separate storage account for logging diagnostics data
References: http://azure.microsoft.com/en-us/documentation/articles/cloud-services-how-to-monitor/
E. _65503.?$
F. _65503_
Answer: A
Explanation:
http://www.cisco.com/c/en/us/td/docs/ios/12_2/termserv/configuration/guide/ftersv_c/tcfaap re.html
NEW QUESTION: 3
An engineer has integrated a new DMVPN to link remote offices across the internet using Cisco IOS routers. When connecting to remote sites, pings and voice data appear to flow properly and all tunnel stats seem to show that are up. However, when trying to connect to a remote server using RDP, the connection fails. Which action resolves this issue?
A. Add RDP port to the extended ACL.
B. Replace certificate on the RDP server.
C. Adjust the MTU size within the routers.
D. Change DMVPN timeout values.
Answer: B
NEW QUESTION: 4
You manage a cloud service that has a web application named WebRole1.
WebRole1 writes error messages to the Windows Event Log.
Users report receiving an error page with the following message: "Event 26 has occurred.
Contact your system administrator."
You need to access the WebRole1 event log.
Which three actions should you perform? Each correct answer presents part of the solution.
A. Run the Enable-AzureWebsiteApplicationDiagnostic PowerShell cmdlet.
B. Create a storage account.
C. Update the cloud service definition file and the service configuration file.
D. Enable verbose monitoring.
E. Update the WebRole1 web.config file.
F. Run the Set-AzureVMDiagnosticsExtensionPowerShell cmdlet.
Answer: B,C,D
Explanation:
step 1 specify the scheduled TransferLogLevelFilter to Verbose in the diagnostics.wadcfg step 2 Update the cloud service definition file and the service configuration file (.cspkg) step 3 best practice is to create a separate storage account for logging diagnostics data
References: http://azure.microsoft.com/en-us/documentation/articles/cloud-services-how-to-monitor/
65503$
E. _65503.?$
F. _65503_
Answer: A
Explanation:
http://www.cisco.com/c/en/us/td/docs/ios/12_2/termserv/configuration/guide/ftersv_c/tcfaap re.html
NEW QUESTION: 3
An engineer has integrated a new DMVPN to link remote offices across the internet using Cisco IOS routers. When connecting to remote sites, pings and voice data appear to flow properly and all tunnel stats seem to show that are up. However, when trying to connect to a remote server using RDP, the connection fails. Which action resolves this issue?
A. Add RDP port to the extended ACL.
B. Replace certificate on the RDP server.
C. Adjust the MTU size within the routers.
D. Change DMVPN timeout values.
Answer: B
NEW QUESTION: 4
You manage a cloud service that has a web application named WebRole1.
WebRole1 writes error messages to the Windows Event Log.
Users report receiving an error page with the following message: "Event 26 has occurred.
Contact your system administrator."
You need to access the WebRole1 event log.
Which three actions should you perform? Each correct answer presents part of the solution.
A. Run the Enable-AzureWebsiteApplicationDiagnostic PowerShell cmdlet.
B. Create a storage account.
C. Update the cloud service definition file and the service configuration file.
D. Enable verbose monitoring.
E. Update the WebRole1 web.config file.
F. Run the Set-AzureVMDiagnosticsExtensionPowerShell cmdlet.
Answer: B,C,D
Explanation:
step 1 specify the scheduled TransferLogLevelFilter to Verbose in the diagnostics.wadcfg step 2 Update the cloud service definition file and the service configuration file (.cspkg) step 3 best practice is to create a separate storage account for logging diagnostics data
References: http://azure.microsoft.com/en-us/documentation/articles/cloud-services-how-to-monitor/
What you will not find at Ce-Isareti are latest HP2-I57 65503$
E. _65503.?$
F. _65503_
Answer: A
Explanation:
http://www.cisco.com/c/en/us/td/docs/ios/12_2/termserv/configuration/guide/ftersv_c/tcfaap re.html
NEW QUESTION: 3
An engineer has integrated a new DMVPN to link remote offices across the internet using Cisco IOS routers. When connecting to remote sites, pings and voice data appear to flow properly and all tunnel stats seem to show that are up. However, when trying to connect to a remote server using RDP, the connection fails. Which action resolves this issue?
A. Add RDP port to the extended ACL.
B. Replace certificate on the RDP server.
C. Adjust the MTU size within the routers.
D. Change DMVPN timeout values.
Answer: B
NEW QUESTION: 4
You manage a cloud service that has a web application named WebRole1.
WebRole1 writes error messages to the Windows Event Log.
Users report receiving an error page with the following message: "Event 26 has occurred.
Contact your system administrator."
You need to access the WebRole1 event log.
Which three actions should you perform? Each correct answer presents part of the solution.
A. Run the Enable-AzureWebsiteApplicationDiagnostic PowerShell cmdlet.
B. Create a storage account.
C. Update the cloud service definition file and the service configuration file.
D. Enable verbose monitoring.
E. Update the WebRole1 web.config file.
F. Run the Set-AzureVMDiagnosticsExtensionPowerShell cmdlet.
Answer: B,C,D
Explanation:
step 1 specify the scheduled TransferLogLevelFilter to Verbose in the diagnostics.wadcfg step 2 Update the cloud service definition file and the service configuration file (.cspkg) step 3 best practice is to create a separate storage account for logging diagnostics data
References: http://azure.microsoft.com/en-us/documentation/articles/cloud-services-how-to-monitor/
E. _65503.?$
F. _65503_
Answer: A
Explanation:
http://www.cisco.com/c/en/us/td/docs/ios/12_2/termserv/configuration/guide/ftersv_c/tcfaap re.html
NEW QUESTION: 3
An engineer has integrated a new DMVPN to link remote offices across the internet using Cisco IOS routers. When connecting to remote sites, pings and voice data appear to flow properly and all tunnel stats seem to show that are up. However, when trying to connect to a remote server using RDP, the connection fails. Which action resolves this issue?
A. Add RDP port to the extended ACL.
B. Replace certificate on the RDP server.
C. Adjust the MTU size within the routers.
D. Change DMVPN timeout values.
Answer: B
NEW QUESTION: 4
You manage a cloud service that has a web application named WebRole1.
WebRole1 writes error messages to the Windows Event Log.
Users report receiving an error page with the following message: "Event 26 has occurred.
Contact your system administrator."
You need to access the WebRole1 event log.
Which three actions should you perform? Each correct answer presents part of the solution.
A. Run the Enable-AzureWebsiteApplicationDiagnostic PowerShell cmdlet.
B. Create a storage account.
C. Update the cloud service definition file and the service configuration file.
D. Enable verbose monitoring.
E. Update the WebRole1 web.config file.
F. Run the Set-AzureVMDiagnosticsExtensionPowerShell cmdlet.
Answer: B,C,D
Explanation:
step 1 specify the scheduled TransferLogLevelFilter to Verbose in the diagnostics.wadcfg step 2 Update the cloud service definition file and the service configuration file (.cspkg) step 3 best practice is to create a separate storage account for logging diagnostics data
References: http://azure.microsoft.com/en-us/documentation/articles/cloud-services-how-to-monitor/
E. _65503.?$
F. _65503_
Answer: A
Explanation:
http://www.cisco.com/c/en/us/td/docs/ios/12_2/termserv/configuration/guide/ftersv_c/tcfaap re.html
NEW QUESTION: 3
An engineer has integrated a new DMVPN to link remote offices across the internet using Cisco IOS routers. When connecting to remote sites, pings and voice data appear to flow properly and all tunnel stats seem to show that are up. However, when trying to connect to a remote server using RDP, the connection fails. Which action resolves this issue?
A. Add RDP port to the extended ACL.
B. Replace certificate on the RDP server.
C. Adjust the MTU size within the routers.
D. Change DMVPN timeout values.
Answer: B
NEW QUESTION: 4
You manage a cloud service that has a web application named WebRole1.
WebRole1 writes error messages to the Windows Event Log.
Users report receiving an error page with the following message: "Event 26 has occurred.
Contact your system administrator."
You need to access the WebRole1 event log.
Which three actions should you perform? Each correct answer presents part of the solution.
A. Run the Enable-AzureWebsiteApplicationDiagnostic PowerShell cmdlet.
B. Create a storage account.
C. Update the cloud service definition file and the service configuration file.
D. Enable verbose monitoring.
E. Update the WebRole1 web.config file.
F. Run the Set-AzureVMDiagnosticsExtensionPowerShell cmdlet.
Answer: B,C,D
Explanation:
step 1 specify the scheduled TransferLogLevelFilter to Verbose in the diagnostics.wadcfg step 2 Update the cloud service definition file and the service configuration file (.cspkg) step 3 best practice is to create a separate storage account for logging diagnostics data
References: http://azure.microsoft.com/en-us/documentation/articles/cloud-services-how-to-monitor/
- D-PST-DY-23 Test Dump
- C_THR97_2305 New Soft Simulations
- Public-Sector-Solutions Interactive Practice Exam
- JavaScript-Developer-I Test Questions
- Study 1z0-997-22 Demo
- UiPath-ASAPv1 Reliable Test Pattern
- Demo 300-430 Test
- New DP-203-KR Exam Dumps
- AD0-E716 Exam Test
- MB-240 Reliable Test Sims
- Exam Dumps Salesforce-Data-Cloud Collection
- NS0-593 Practice Engine
- Certification DA-100 Test Answers
- New Exam PDII Braindumps
- Valid Test PL-900-KR Bootcamp
- C_S4CPR_2402 Latest Test Questions
- D-PM-IN-23 Valid Exam Voucher
- Exam Dumps HPE0-V26 Pdf
- HP2-I73 Detail Explanation
- Exam B2B-Commerce-Administrator Quiz
- Latest D-PDM-DY-23 Learning Material
- CSCP Exam Engine
- PL-300-KR Reliable Study Guide
- QSDA2024 Valid Test Discount
E. _65503.?$
F. _65503_
Answer: A
Explanation:
http://www.cisco.com/c/en/us/td/docs/ios/12_2/termserv/configuration/guide/ftersv_c/tcfaap re.html
NEW QUESTION: 3
An engineer has integrated a new DMVPN to link remote offices across the internet using Cisco IOS routers. When connecting to remote sites, pings and voice data appear to flow properly and all tunnel stats seem to show that are up. However, when trying to connect to a remote server using RDP, the connection fails. Which action resolves this issue?
A. Add RDP port to the extended ACL.
B. Replace certificate on the RDP server.
C. Adjust the MTU size within the routers.
D. Change DMVPN timeout values.
Answer: B
NEW QUESTION: 4
You manage a cloud service that has a web application named WebRole1.
WebRole1 writes error messages to the Windows Event Log.
Users report receiving an error page with the following message: "Event 26 has occurred.
Contact your system administrator."
You need to access the WebRole1 event log.
Which three actions should you perform? Each correct answer presents part of the solution.
A. Run the Enable-AzureWebsiteApplicationDiagnostic PowerShell cmdlet.
B. Create a storage account.
C. Update the cloud service definition file and the service configuration file.
D. Enable verbose monitoring.
E. Update the WebRole1 web.config file.
F. Run the Set-AzureVMDiagnosticsExtensionPowerShell cmdlet.
Answer: B,C,D
Explanation:
step 1 specify the scheduled TransferLogLevelFilter to Verbose in the diagnostics.wadcfg step 2 Update the cloud service definition file and the service configuration file (.cspkg) step 3 best practice is to create a separate storage account for logging diagnostics data
References: http://azure.microsoft.com/en-us/documentation/articles/cloud-services-how-to-monitor/
65503$
E. _65503.?$
F. _65503_
Answer: A
Explanation:
http://www.cisco.com/c/en/us/td/docs/ios/12_2/termserv/configuration/guide/ftersv_c/tcfaap re.html
NEW QUESTION: 3
An engineer has integrated a new DMVPN to link remote offices across the internet using Cisco IOS routers. When connecting to remote sites, pings and voice data appear to flow properly and all tunnel stats seem to show that are up. However, when trying to connect to a remote server using RDP, the connection fails. Which action resolves this issue?
A. Add RDP port to the extended ACL.
B. Replace certificate on the RDP server.
C. Adjust the MTU size within the routers.
D. Change DMVPN timeout values.
Answer: B
NEW QUESTION: 4
You manage a cloud service that has a web application named WebRole1.
WebRole1 writes error messages to the Windows Event Log.
Users report receiving an error page with the following message: "Event 26 has occurred.
Contact your system administrator."
You need to access the WebRole1 event log.
Which three actions should you perform? Each correct answer presents part of the solution.
A. Run the Enable-AzureWebsiteApplicationDiagnostic PowerShell cmdlet.
B. Create a storage account.
C. Update the cloud service definition file and the service configuration file.
D. Enable verbose monitoring.
E. Update the WebRole1 web.config file.
F. Run the Set-AzureVMDiagnosticsExtensionPowerShell cmdlet.
Answer: B,C,D
Explanation:
step 1 specify the scheduled TransferLogLevelFilter to Verbose in the diagnostics.wadcfg step 2 Update the cloud service definition file and the service configuration file (.cspkg) step 3 best practice is to create a separate storage account for logging diagnostics data
References: http://azure.microsoft.com/en-us/documentation/articles/cloud-services-how-to-monitor/
Proper training for HP2-I57 65503$
E. _65503.?$
F. _65503_
Answer: A
Explanation:
http://www.cisco.com/c/en/us/td/docs/ios/12_2/termserv/configuration/guide/ftersv_c/tcfaap re.html
NEW QUESTION: 3
An engineer has integrated a new DMVPN to link remote offices across the internet using Cisco IOS routers. When connecting to remote sites, pings and voice data appear to flow properly and all tunnel stats seem to show that are up. However, when trying to connect to a remote server using RDP, the connection fails. Which action resolves this issue?
A. Add RDP port to the extended ACL.
B. Replace certificate on the RDP server.
C. Adjust the MTU size within the routers.
D. Change DMVPN timeout values.
Answer: B
NEW QUESTION: 4
You manage a cloud service that has a web application named WebRole1.
WebRole1 writes error messages to the Windows Event Log.
Users report receiving an error page with the following message: "Event 26 has occurred.
Contact your system administrator."
You need to access the WebRole1 event log.
Which three actions should you perform? Each correct answer presents part of the solution.
A. Run the Enable-AzureWebsiteApplicationDiagnostic PowerShell cmdlet.
B. Create a storage account.
C. Update the cloud service definition file and the service configuration file.
D. Enable verbose monitoring.
E. Update the WebRole1 web.config file.
F. Run the Set-AzureVMDiagnosticsExtensionPowerShell cmdlet.
Answer: B,C,D
Explanation:
step 1 specify the scheduled TransferLogLevelFilter to Verbose in the diagnostics.wadcfg step 2 Update the cloud service definition file and the service configuration file (.cspkg) step 3 best practice is to create a separate storage account for logging diagnostics data
References: http://azure.microsoft.com/en-us/documentation/articles/cloud-services-how-to-monitor/
E. _65503.?$
F. _65503_
Answer: A
Explanation:
http://www.cisco.com/c/en/us/td/docs/ios/12_2/termserv/configuration/guide/ftersv_c/tcfaap re.html
NEW QUESTION: 3
An engineer has integrated a new DMVPN to link remote offices across the internet using Cisco IOS routers. When connecting to remote sites, pings and voice data appear to flow properly and all tunnel stats seem to show that are up. However, when trying to connect to a remote server using RDP, the connection fails. Which action resolves this issue?
A. Add RDP port to the extended ACL.
B. Replace certificate on the RDP server.
C. Adjust the MTU size within the routers.
D. Change DMVPN timeout values.
Answer: B
NEW QUESTION: 4
You manage a cloud service that has a web application named WebRole1.
WebRole1 writes error messages to the Windows Event Log.
Users report receiving an error page with the following message: "Event 26 has occurred.
Contact your system administrator."
You need to access the WebRole1 event log.
Which three actions should you perform? Each correct answer presents part of the solution.
A. Run the Enable-AzureWebsiteApplicationDiagnostic PowerShell cmdlet.
B. Create a storage account.
C. Update the cloud service definition file and the service configuration file.
D. Enable verbose monitoring.
E. Update the WebRole1 web.config file.
F. Run the Set-AzureVMDiagnosticsExtensionPowerShell cmdlet.
Answer: B,C,D
Explanation:
step 1 specify the scheduled TransferLogLevelFilter to Verbose in the diagnostics.wadcfg step 2 Update the cloud service definition file and the service configuration file (.cspkg) step 3 best practice is to create a separate storage account for logging diagnostics data
References: http://azure.microsoft.com/en-us/documentation/articles/cloud-services-how-to-monitor/
E. _65503.?$
F. _65503_
Answer: A
Explanation:
http://www.cisco.com/c/en/us/td/docs/ios/12_2/termserv/configuration/guide/ftersv_c/tcfaap re.html
NEW QUESTION: 3
An engineer has integrated a new DMVPN to link remote offices across the internet using Cisco IOS routers. When connecting to remote sites, pings and voice data appear to flow properly and all tunnel stats seem to show that are up. However, when trying to connect to a remote server using RDP, the connection fails. Which action resolves this issue?
A. Add RDP port to the extended ACL.
B. Replace certificate on the RDP server.
C. Adjust the MTU size within the routers.
D. Change DMVPN timeout values.
Answer: B
NEW QUESTION: 4
You manage a cloud service that has a web application named WebRole1.
WebRole1 writes error messages to the Windows Event Log.
Users report receiving an error page with the following message: "Event 26 has occurred.
Contact your system administrator."
You need to access the WebRole1 event log.
Which three actions should you perform? Each correct answer presents part of the solution.
A. Run the Enable-AzureWebsiteApplicationDiagnostic PowerShell cmdlet.
B. Create a storage account.
C. Update the cloud service definition file and the service configuration file.
D. Enable verbose monitoring.
E. Update the WebRole1 web.config file.
F. Run the Set-AzureVMDiagnosticsExtensionPowerShell cmdlet.
Answer: B,C,D
Explanation:
step 1 specify the scheduled TransferLogLevelFilter to Verbose in the diagnostics.wadcfg step 2 Update the cloud service definition file and the service configuration file (.cspkg) step 3 best practice is to create a separate storage account for logging diagnostics data
References: http://azure.microsoft.com/en-us/documentation/articles/cloud-services-how-to-monitor/
E. _65503.?$
F. _65503_
Answer: A
Explanation:
http://www.cisco.com/c/en/us/td/docs/ios/12_2/termserv/configuration/guide/ftersv_c/tcfaap re.html
NEW QUESTION: 3
An engineer has integrated a new DMVPN to link remote offices across the internet using Cisco IOS routers. When connecting to remote sites, pings and voice data appear to flow properly and all tunnel stats seem to show that are up. However, when trying to connect to a remote server using RDP, the connection fails. Which action resolves this issue?
A. Add RDP port to the extended ACL.
B. Replace certificate on the RDP server.
C. Adjust the MTU size within the routers.
D. Change DMVPN timeout values.
Answer: B
NEW QUESTION: 4
You manage a cloud service that has a web application named WebRole1.
WebRole1 writes error messages to the Windows Event Log.
Users report receiving an error page with the following message: "Event 26 has occurred.
Contact your system administrator."
You need to access the WebRole1 event log.
Which three actions should you perform? Each correct answer presents part of the solution.
A. Run the Enable-AzureWebsiteApplicationDiagnostic PowerShell cmdlet.
B. Create a storage account.
C. Update the cloud service definition file and the service configuration file.
D. Enable verbose monitoring.
E. Update the WebRole1 web.config file.
F. Run the Set-AzureVMDiagnosticsExtensionPowerShell cmdlet.
Answer: B,C,D
Explanation:
step 1 specify the scheduled TransferLogLevelFilter to Verbose in the diagnostics.wadcfg step 2 Update the cloud service definition file and the service configuration file (.cspkg) step 3 best practice is to create a separate storage account for logging diagnostics data
References: http://azure.microsoft.com/en-us/documentation/articles/cloud-services-how-to-monitor/
E. _65503.?$
F. _65503_
Answer: A
Explanation:
http://www.cisco.com/c/en/us/td/docs/ios/12_2/termserv/configuration/guide/ftersv_c/tcfaap re.html
NEW QUESTION: 3
An engineer has integrated a new DMVPN to link remote offices across the internet using Cisco IOS routers. When connecting to remote sites, pings and voice data appear to flow properly and all tunnel stats seem to show that are up. However, when trying to connect to a remote server using RDP, the connection fails. Which action resolves this issue?
A. Add RDP port to the extended ACL.
B. Replace certificate on the RDP server.
C. Adjust the MTU size within the routers.
D. Change DMVPN timeout values.
Answer: B
NEW QUESTION: 4
You manage a cloud service that has a web application named WebRole1.
WebRole1 writes error messages to the Windows Event Log.
Users report receiving an error page with the following message: "Event 26 has occurred.
Contact your system administrator."
You need to access the WebRole1 event log.
Which three actions should you perform? Each correct answer presents part of the solution.
A. Run the Enable-AzureWebsiteApplicationDiagnostic PowerShell cmdlet.
B. Create a storage account.
C. Update the cloud service definition file and the service configuration file.
D. Enable verbose monitoring.
E. Update the WebRole1 web.config file.
F. Run the Set-AzureVMDiagnosticsExtensionPowerShell cmdlet.
Answer: B,C,D
Explanation:
step 1 specify the scheduled TransferLogLevelFilter to Verbose in the diagnostics.wadcfg step 2 Update the cloud service definition file and the service configuration file (.cspkg) step 3 best practice is to create a separate storage account for logging diagnostics data
References: http://azure.microsoft.com/en-us/documentation/articles/cloud-services-how-to-monitor/
E. _65503.?$
F. _65503_
Answer: A
Explanation:
http://www.cisco.com/c/en/us/td/docs/ios/12_2/termserv/configuration/guide/ftersv_c/tcfaap re.html
NEW QUESTION: 3
An engineer has integrated a new DMVPN to link remote offices across the internet using Cisco IOS routers. When connecting to remote sites, pings and voice data appear to flow properly and all tunnel stats seem to show that are up. However, when trying to connect to a remote server using RDP, the connection fails. Which action resolves this issue?
A. Add RDP port to the extended ACL.
B. Replace certificate on the RDP server.
C. Adjust the MTU size within the routers.
D. Change DMVPN timeout values.
Answer: B
NEW QUESTION: 4
You manage a cloud service that has a web application named WebRole1.
WebRole1 writes error messages to the Windows Event Log.
Users report receiving an error page with the following message: "Event 26 has occurred.
Contact your system administrator."
You need to access the WebRole1 event log.
Which three actions should you perform? Each correct answer presents part of the solution.
A. Run the Enable-AzureWebsiteApplicationDiagnostic PowerShell cmdlet.
B. Create a storage account.
C. Update the cloud service definition file and the service configuration file.
D. Enable verbose monitoring.
E. Update the WebRole1 web.config file.
F. Run the Set-AzureVMDiagnosticsExtensionPowerShell cmdlet.
Answer: B,C,D
Explanation:
step 1 specify the scheduled TransferLogLevelFilter to Verbose in the diagnostics.wadcfg step 2 Update the cloud service definition file and the service configuration file (.cspkg) step 3 best practice is to create a separate storage account for logging diagnostics data
References: http://azure.microsoft.com/en-us/documentation/articles/cloud-services-how-to-monitor/
E. _65503.?$
F. _65503_
Answer: A
Explanation:
http://www.cisco.com/c/en/us/td/docs/ios/12_2/termserv/configuration/guide/ftersv_c/tcfaap re.html
NEW QUESTION: 3
An engineer has integrated a new DMVPN to link remote offices across the internet using Cisco IOS routers. When connecting to remote sites, pings and voice data appear to flow properly and all tunnel stats seem to show that are up. However, when trying to connect to a remote server using RDP, the connection fails. Which action resolves this issue?
A. Add RDP port to the extended ACL.
B. Replace certificate on the RDP server.
C. Adjust the MTU size within the routers.
D. Change DMVPN timeout values.
Answer: B
NEW QUESTION: 4
You manage a cloud service that has a web application named WebRole1.
WebRole1 writes error messages to the Windows Event Log.
Users report receiving an error page with the following message: "Event 26 has occurred.
Contact your system administrator."
You need to access the WebRole1 event log.
Which three actions should you perform? Each correct answer presents part of the solution.
A. Run the Enable-AzureWebsiteApplicationDiagnostic PowerShell cmdlet.
B. Create a storage account.
C. Update the cloud service definition file and the service configuration file.
D. Enable verbose monitoring.
E. Update the WebRole1 web.config file.
F. Run the Set-AzureVMDiagnosticsExtensionPowerShell cmdlet.
Answer: B,C,D
Explanation:
step 1 specify the scheduled TransferLogLevelFilter to Verbose in the diagnostics.wadcfg step 2 Update the cloud service definition file and the service configuration file (.cspkg) step 3 best practice is to create a separate storage account for logging diagnostics data
References: http://azure.microsoft.com/en-us/documentation/articles/cloud-services-how-to-monitor/
Don't settle for sideline HP2-I57 65503$
E. _65503.?$
F. _65503_
Answer: A
Explanation:
http://www.cisco.com/c/en/us/td/docs/ios/12_2/termserv/configuration/guide/ftersv_c/tcfaap re.html
NEW QUESTION: 3
An engineer has integrated a new DMVPN to link remote offices across the internet using Cisco IOS routers. When connecting to remote sites, pings and voice data appear to flow properly and all tunnel stats seem to show that are up. However, when trying to connect to a remote server using RDP, the connection fails. Which action resolves this issue?
A. Add RDP port to the extended ACL.
B. Replace certificate on the RDP server.
C. Adjust the MTU size within the routers.
D. Change DMVPN timeout values.
Answer: B
NEW QUESTION: 4
You manage a cloud service that has a web application named WebRole1.
WebRole1 writes error messages to the Windows Event Log.
Users report receiving an error page with the following message: "Event 26 has occurred.
Contact your system administrator."
You need to access the WebRole1 event log.
Which three actions should you perform? Each correct answer presents part of the solution.
A. Run the Enable-AzureWebsiteApplicationDiagnostic PowerShell cmdlet.
B. Create a storage account.
C. Update the cloud service definition file and the service configuration file.
D. Enable verbose monitoring.
E. Update the WebRole1 web.config file.
F. Run the Set-AzureVMDiagnosticsExtensionPowerShell cmdlet.
Answer: B,C,D
Explanation:
step 1 specify the scheduled TransferLogLevelFilter to Verbose in the diagnostics.wadcfg step 2 Update the cloud service definition file and the service configuration file (.cspkg) step 3 best practice is to create a separate storage account for logging diagnostics data
References: http://azure.microsoft.com/en-us/documentation/articles/cloud-services-how-to-monitor/
E. _65503.?$
F. _65503_
Answer: A
Explanation:
http://www.cisco.com/c/en/us/td/docs/ios/12_2/termserv/configuration/guide/ftersv_c/tcfaap re.html
NEW QUESTION: 3
An engineer has integrated a new DMVPN to link remote offices across the internet using Cisco IOS routers. When connecting to remote sites, pings and voice data appear to flow properly and all tunnel stats seem to show that are up. However, when trying to connect to a remote server using RDP, the connection fails. Which action resolves this issue?
A. Add RDP port to the extended ACL.
B. Replace certificate on the RDP server.
C. Adjust the MTU size within the routers.
D. Change DMVPN timeout values.
Answer: B
NEW QUESTION: 4
You manage a cloud service that has a web application named WebRole1.
WebRole1 writes error messages to the Windows Event Log.
Users report receiving an error page with the following message: "Event 26 has occurred.
Contact your system administrator."
You need to access the WebRole1 event log.
Which three actions should you perform? Each correct answer presents part of the solution.
A. Run the Enable-AzureWebsiteApplicationDiagnostic PowerShell cmdlet.
B. Create a storage account.
C. Update the cloud service definition file and the service configuration file.
D. Enable verbose monitoring.
E. Update the WebRole1 web.config file.
F. Run the Set-AzureVMDiagnosticsExtensionPowerShell cmdlet.
Answer: B,C,D
Explanation:
step 1 specify the scheduled TransferLogLevelFilter to Verbose in the diagnostics.wadcfg step 2 Update the cloud service definition file and the service configuration file (.cspkg) step 3 best practice is to create a separate storage account for logging diagnostics data
References: http://azure.microsoft.com/en-us/documentation/articles/cloud-services-how-to-monitor/
E. _65503.?$
F. _65503_
Answer: A
Explanation:
http://www.cisco.com/c/en/us/td/docs/ios/12_2/termserv/configuration/guide/ftersv_c/tcfaap re.html
NEW QUESTION: 3
An engineer has integrated a new DMVPN to link remote offices across the internet using Cisco IOS routers. When connecting to remote sites, pings and voice data appear to flow properly and all tunnel stats seem to show that are up. However, when trying to connect to a remote server using RDP, the connection fails. Which action resolves this issue?
A. Add RDP port to the extended ACL.
B. Replace certificate on the RDP server.
C. Adjust the MTU size within the routers.
D. Change DMVPN timeout values.
Answer: B
NEW QUESTION: 4
You manage a cloud service that has a web application named WebRole1.
WebRole1 writes error messages to the Windows Event Log.
Users report receiving an error page with the following message: "Event 26 has occurred.
Contact your system administrator."
You need to access the WebRole1 event log.
Which three actions should you perform? Each correct answer presents part of the solution.
A. Run the Enable-AzureWebsiteApplicationDiagnostic PowerShell cmdlet.
B. Create a storage account.
C. Update the cloud service definition file and the service configuration file.
D. Enable verbose monitoring.
E. Update the WebRole1 web.config file.
F. Run the Set-AzureVMDiagnosticsExtensionPowerShell cmdlet.
Answer: B,C,D
Explanation:
step 1 specify the scheduled TransferLogLevelFilter to Verbose in the diagnostics.wadcfg step 2 Update the cloud service definition file and the service configuration file (.cspkg) step 3 best practice is to create a separate storage account for logging diagnostics data
References: http://azure.microsoft.com/en-us/documentation/articles/cloud-services-how-to-monitor/
E. _65503.?$
F. _65503_
Answer: A
Explanation:
http://www.cisco.com/c/en/us/td/docs/ios/12_2/termserv/configuration/guide/ftersv_c/tcfaap re.html
NEW QUESTION: 3
An engineer has integrated a new DMVPN to link remote offices across the internet using Cisco IOS routers. When connecting to remote sites, pings and voice data appear to flow properly and all tunnel stats seem to show that are up. However, when trying to connect to a remote server using RDP, the connection fails. Which action resolves this issue?
A. Add RDP port to the extended ACL.
B. Replace certificate on the RDP server.
C. Adjust the MTU size within the routers.
D. Change DMVPN timeout values.
Answer: B
NEW QUESTION: 4
You manage a cloud service that has a web application named WebRole1.
WebRole1 writes error messages to the Windows Event Log.
Users report receiving an error page with the following message: "Event 26 has occurred.
Contact your system administrator."
You need to access the WebRole1 event log.
Which three actions should you perform? Each correct answer presents part of the solution.
A. Run the Enable-AzureWebsiteApplicationDiagnostic PowerShell cmdlet.
B. Create a storage account.
C. Update the cloud service definition file and the service configuration file.
D. Enable verbose monitoring.
E. Update the WebRole1 web.config file.
F. Run the Set-AzureVMDiagnosticsExtensionPowerShell cmdlet.
Answer: B,C,D
Explanation:
step 1 specify the scheduled TransferLogLevelFilter to Verbose in the diagnostics.wadcfg step 2 Update the cloud service definition file and the service configuration file (.cspkg) step 3 best practice is to create a separate storage account for logging diagnostics data
References: http://azure.microsoft.com/en-us/documentation/articles/cloud-services-how-to-monitor/
E. _65503.?$
F. _65503_
Answer: A
Explanation:
http://www.cisco.com/c/en/us/td/docs/ios/12_2/termserv/configuration/guide/ftersv_c/tcfaap re.html
NEW QUESTION: 3
An engineer has integrated a new DMVPN to link remote offices across the internet using Cisco IOS routers. When connecting to remote sites, pings and voice data appear to flow properly and all tunnel stats seem to show that are up. However, when trying to connect to a remote server using RDP, the connection fails. Which action resolves this issue?
A. Add RDP port to the extended ACL.
B. Replace certificate on the RDP server.
C. Adjust the MTU size within the routers.
D. Change DMVPN timeout values.
Answer: B
NEW QUESTION: 4
You manage a cloud service that has a web application named WebRole1.
WebRole1 writes error messages to the Windows Event Log.
Users report receiving an error page with the following message: "Event 26 has occurred.
Contact your system administrator."
You need to access the WebRole1 event log.
Which three actions should you perform? Each correct answer presents part of the solution.
A. Run the Enable-AzureWebsiteApplicationDiagnostic PowerShell cmdlet.
B. Create a storage account.
C. Update the cloud service definition file and the service configuration file.
D. Enable verbose monitoring.
E. Update the WebRole1 web.config file.
F. Run the Set-AzureVMDiagnosticsExtensionPowerShell cmdlet.
Answer: B,C,D
Explanation:
step 1 specify the scheduled TransferLogLevelFilter to Verbose in the diagnostics.wadcfg step 2 Update the cloud service definition file and the service configuration file (.cspkg) step 3 best practice is to create a separate storage account for logging diagnostics data
References: http://azure.microsoft.com/en-us/documentation/articles/cloud-services-how-to-monitor/