Passing the Mobile-Solutions-Architecture-Designer 65503$
E. _65503.?$
F. _65503_
Answer: A
Explanation:
http://www.cisco.com/c/en/us/td/docs/ios/12_2/termserv/configuration/guide/ftersv_c/tcfaap re.html
NEW QUESTION: 3
An engineer has integrated a new DMVPN to link remote offices across the internet using Cisco IOS routers. When connecting to remote sites, pings and voice data appear to flow properly and all tunnel stats seem to show that are up. However, when trying to connect to a remote server using RDP, the connection fails. Which action resolves this issue?
A. Add RDP port to the extended ACL.
B. Replace certificate on the RDP server.
C. Adjust the MTU size within the routers.
D. Change DMVPN timeout values.
Answer: B
NEW QUESTION: 4
You manage a cloud service that has a web application named WebRole1.
WebRole1 writes error messages to the Windows Event Log.
Users report receiving an error page with the following message: "Event 26 has occurred.
Contact your system administrator."
You need to access the WebRole1 event log.
Which three actions should you perform? Each correct answer presents part of the solution.
A. Run the Enable-AzureWebsiteApplicationDiagnostic PowerShell cmdlet.
B. Create a storage account.
C. Update the cloud service definition file and the service configuration file.
D. Enable verbose monitoring.
E. Update the WebRole1 web.config file.
F. Run the Set-AzureVMDiagnosticsExtensionPowerShell cmdlet.
Answer: B,C,D
Explanation:
step 1 specify the scheduled TransferLogLevelFilter to Verbose in the diagnostics.wadcfg step 2 Update the cloud service definition file and the service configuration file (.cspkg) step 3 best practice is to create a separate storage account for logging diagnostics data
References: http://azure.microsoft.com/en-us/documentation/articles/cloud-services-how-to-monitor/
E. _65503.?$
F. _65503_
Answer: A
Explanation:
http://www.cisco.com/c/en/us/td/docs/ios/12_2/termserv/configuration/guide/ftersv_c/tcfaap re.html
NEW QUESTION: 3
An engineer has integrated a new DMVPN to link remote offices across the internet using Cisco IOS routers. When connecting to remote sites, pings and voice data appear to flow properly and all tunnel stats seem to show that are up. However, when trying to connect to a remote server using RDP, the connection fails. Which action resolves this issue?
A. Add RDP port to the extended ACL.
B. Replace certificate on the RDP server.
C. Adjust the MTU size within the routers.
D. Change DMVPN timeout values.
Answer: B
NEW QUESTION: 4
You manage a cloud service that has a web application named WebRole1.
WebRole1 writes error messages to the Windows Event Log.
Users report receiving an error page with the following message: "Event 26 has occurred.
Contact your system administrator."
You need to access the WebRole1 event log.
Which three actions should you perform? Each correct answer presents part of the solution.
A. Run the Enable-AzureWebsiteApplicationDiagnostic PowerShell cmdlet.
B. Create a storage account.
C. Update the cloud service definition file and the service configuration file.
D. Enable verbose monitoring.
E. Update the WebRole1 web.config file.
F. Run the Set-AzureVMDiagnosticsExtensionPowerShell cmdlet.
Answer: B,C,D
Explanation:
step 1 specify the scheduled TransferLogLevelFilter to Verbose in the diagnostics.wadcfg step 2 Update the cloud service definition file and the service configuration file (.cspkg) step 3 best practice is to create a separate storage account for logging diagnostics data
References: http://azure.microsoft.com/en-us/documentation/articles/cloud-services-how-to-monitor/
E. _65503.?$
F. _65503_
Answer: A
Explanation:
http://www.cisco.com/c/en/us/td/docs/ios/12_2/termserv/configuration/guide/ftersv_c/tcfaap re.html
NEW QUESTION: 3
An engineer has integrated a new DMVPN to link remote offices across the internet using Cisco IOS routers. When connecting to remote sites, pings and voice data appear to flow properly and all tunnel stats seem to show that are up. However, when trying to connect to a remote server using RDP, the connection fails. Which action resolves this issue?
A. Add RDP port to the extended ACL.
B. Replace certificate on the RDP server.
C. Adjust the MTU size within the routers.
D. Change DMVPN timeout values.
Answer: B
NEW QUESTION: 4
You manage a cloud service that has a web application named WebRole1.
WebRole1 writes error messages to the Windows Event Log.
Users report receiving an error page with the following message: "Event 26 has occurred.
Contact your system administrator."
You need to access the WebRole1 event log.
Which three actions should you perform? Each correct answer presents part of the solution.
A. Run the Enable-AzureWebsiteApplicationDiagnostic PowerShell cmdlet.
B. Create a storage account.
C. Update the cloud service definition file and the service configuration file.
D. Enable verbose monitoring.
E. Update the WebRole1 web.config file.
F. Run the Set-AzureVMDiagnosticsExtensionPowerShell cmdlet.
Answer: B,C,D
Explanation:
step 1 specify the scheduled TransferLogLevelFilter to Verbose in the diagnostics.wadcfg step 2 Update the cloud service definition file and the service configuration file (.cspkg) step 3 best practice is to create a separate storage account for logging diagnostics data
References: http://azure.microsoft.com/en-us/documentation/articles/cloud-services-how-to-monitor/
This is more than a Mobile-Solutions-Architecture-Designer 65503$
E. _65503.?$
F. _65503_
Answer: A
Explanation:
http://www.cisco.com/c/en/us/td/docs/ios/12_2/termserv/configuration/guide/ftersv_c/tcfaap re.html
NEW QUESTION: 3
An engineer has integrated a new DMVPN to link remote offices across the internet using Cisco IOS routers. When connecting to remote sites, pings and voice data appear to flow properly and all tunnel stats seem to show that are up. However, when trying to connect to a remote server using RDP, the connection fails. Which action resolves this issue?
A. Add RDP port to the extended ACL.
B. Replace certificate on the RDP server.
C. Adjust the MTU size within the routers.
D. Change DMVPN timeout values.
Answer: B
NEW QUESTION: 4
You manage a cloud service that has a web application named WebRole1.
WebRole1 writes error messages to the Windows Event Log.
Users report receiving an error page with the following message: "Event 26 has occurred.
Contact your system administrator."
You need to access the WebRole1 event log.
Which three actions should you perform? Each correct answer presents part of the solution.
A. Run the Enable-AzureWebsiteApplicationDiagnostic PowerShell cmdlet.
B. Create a storage account.
C. Update the cloud service definition file and the service configuration file.
D. Enable verbose monitoring.
E. Update the WebRole1 web.config file.
F. Run the Set-AzureVMDiagnosticsExtensionPowerShell cmdlet.
Answer: B,C,D
Explanation:
step 1 specify the scheduled TransferLogLevelFilter to Verbose in the diagnostics.wadcfg step 2 Update the cloud service definition file and the service configuration file (.cspkg) step 3 best practice is to create a separate storage account for logging diagnostics data
References: http://azure.microsoft.com/en-us/documentation/articles/cloud-services-how-to-monitor/
- C_THR85_2311 Test Dump
- AZ-104 New Soft Simulations
- C-THR81-2311 Interactive Practice Exam
- 102-500 Test Questions
- Study CIPP-C Demo
- SC-200 Reliable Test Pattern
- Demo 3V0-42.23 Test
- New C-THR12-2311 Exam Dumps
- CV0-004 Exam Test
- Data-Cloud-Consultant Reliable Test Sims
- Exam Dumps H13-629_V3.0 Collection
- GSEC Practice Engine
- Certification PAM-SEN Test Answers
- New Exam 1z1-829 Braindumps
- Valid Test C_S4CWM_2308 Bootcamp
- 010-160 Latest Test Questions
- E-BW4HANA214 Valid Exam Voucher
- Exam Dumps SK0-005 Pdf
- CRT-101 Detail Explanation
- Exam MB-300 Quiz
- Latest DP-300 Learning Material
- APM-PFQ Exam Engine
- 1z0-1033-22 Reliable Study Guide
- ICS-SCADA Valid Test Discount
E. _65503.?$
F. _65503_
Answer: A
Explanation:
http://www.cisco.com/c/en/us/td/docs/ios/12_2/termserv/configuration/guide/ftersv_c/tcfaap re.html
NEW QUESTION: 3
An engineer has integrated a new DMVPN to link remote offices across the internet using Cisco IOS routers. When connecting to remote sites, pings and voice data appear to flow properly and all tunnel stats seem to show that are up. However, when trying to connect to a remote server using RDP, the connection fails. Which action resolves this issue?
A. Add RDP port to the extended ACL.
B. Replace certificate on the RDP server.
C. Adjust the MTU size within the routers.
D. Change DMVPN timeout values.
Answer: B
NEW QUESTION: 4
You manage a cloud service that has a web application named WebRole1.
WebRole1 writes error messages to the Windows Event Log.
Users report receiving an error page with the following message: "Event 26 has occurred.
Contact your system administrator."
You need to access the WebRole1 event log.
Which three actions should you perform? Each correct answer presents part of the solution.
A. Run the Enable-AzureWebsiteApplicationDiagnostic PowerShell cmdlet.
B. Create a storage account.
C. Update the cloud service definition file and the service configuration file.
D. Enable verbose monitoring.
E. Update the WebRole1 web.config file.
F. Run the Set-AzureVMDiagnosticsExtensionPowerShell cmdlet.
Answer: B,C,D
Explanation:
step 1 specify the scheduled TransferLogLevelFilter to Verbose in the diagnostics.wadcfg step 2 Update the cloud service definition file and the service configuration file (.cspkg) step 3 best practice is to create a separate storage account for logging diagnostics data
References: http://azure.microsoft.com/en-us/documentation/articles/cloud-services-how-to-monitor/
E. _65503.?$
F. _65503_
Answer: A
Explanation:
http://www.cisco.com/c/en/us/td/docs/ios/12_2/termserv/configuration/guide/ftersv_c/tcfaap re.html
NEW QUESTION: 3
An engineer has integrated a new DMVPN to link remote offices across the internet using Cisco IOS routers. When connecting to remote sites, pings and voice data appear to flow properly and all tunnel stats seem to show that are up. However, when trying to connect to a remote server using RDP, the connection fails. Which action resolves this issue?
A. Add RDP port to the extended ACL.
B. Replace certificate on the RDP server.
C. Adjust the MTU size within the routers.
D. Change DMVPN timeout values.
Answer: B
NEW QUESTION: 4
You manage a cloud service that has a web application named WebRole1.
WebRole1 writes error messages to the Windows Event Log.
Users report receiving an error page with the following message: "Event 26 has occurred.
Contact your system administrator."
You need to access the WebRole1 event log.
Which three actions should you perform? Each correct answer presents part of the solution.
A. Run the Enable-AzureWebsiteApplicationDiagnostic PowerShell cmdlet.
B. Create a storage account.
C. Update the cloud service definition file and the service configuration file.
D. Enable verbose monitoring.
E. Update the WebRole1 web.config file.
F. Run the Set-AzureVMDiagnosticsExtensionPowerShell cmdlet.
Answer: B,C,D
Explanation:
step 1 specify the scheduled TransferLogLevelFilter to Verbose in the diagnostics.wadcfg step 2 Update the cloud service definition file and the service configuration file (.cspkg) step 3 best practice is to create a separate storage account for logging diagnostics data
References: http://azure.microsoft.com/en-us/documentation/articles/cloud-services-how-to-monitor/
Salesforce Mobile-Solutions-Architecture-Designer Valid Exam Preparation It will only take you 1-2 days to finish the dumps VCE pdf and recite them before the exam, Our experts have distilled the crucial points of the exam into our Mobile-Solutions-Architecture-Designer training materials by integrating all useful content into them, Salesforce Mobile-Solutions-Architecture-Designer Valid Exam Preparation Just try and you will love them, Salesforce Mobile-Solutions-Architecture-Designer Valid Exam Preparation Well begun is half done.
Executives need to spend just a few days in the trenches with their technical https://pass4sure.itexamdownload.com/Mobile-Solutions-Architecture-Designer-valid-questions.html staff to get the true picture, Downloading and Installing Turbo Lister, When you're ready to get started, click one of those links.
Our Mobile-Solutions-Architecture-Designer certification training materials will be a good option for you, Touch to close the camera settings, The List Interface, In order to focus a depth map around Detailed C_HRHFC_2311 Study Plan an appropriate area, you may choose to use spotlights instead of a directional light.
This may, in turn, increase the consumer appetite for complex products https://troytec.validtorrent.com/Mobile-Solutions-Architecture-Designer-valid-exam-torrent.html that have the above three elements, Then she cranked up the volume on the viewport and laughed as everyone's speakers screamed with feedback.
When teams are staffed with quality over quantity in mind, they Latest NetSuite-Financial-User Braindumps Questions can be both skilled and lean, Open the manifest.xml file, As a result, the program will continue when a null is encountered.
High Hit-Rate Salesforce - Mobile-Solutions-Architecture-Designer - Salesforce Certified Mobile Solutions Architecture Designer Valid Exam Preparation
Grounded, ground loop, One or more of the frames may contain a tiny, tiny scroll HPE7-A04 Valid Dumps Ebook bar at the top, It is difficult to get the attention of review sites because so many developers are requesting reviews, but you should still submit to them.
The Design Method will teach you a proven, repeatable process for Valid Exam Mobile-Solutions-Architecture-Designer Preparation solving visual communication problems, It will only take you 1-2 days to finish the dumps VCE pdf and recite them before the exam.
Our experts have distilled the crucial points of the exam into our Mobile-Solutions-Architecture-Designer training materials by integrating all useful content into them, Just try and you will love them.
Well begun is half done, Besides, the Mobile-Solutions-Architecture-Designer free demo must be the best reference for your assessment, Just think that, you only need to spend some money, you can get a certificate as well as improve your ability.
It’s a critical question for you, Come and buy our Mobile-Solutions-Architecture-Designer exam materials, you will get more than you can imagine, The content of the Mobile-Solutions-Architecture-Designer training guide is the real questions and Valid Exam Mobile-Solutions-Architecture-Designer Preparation answers which are always kept to be the latest according to the efforts of the professionals.
Mobile-Solutions-Architecture-Designer Valid Exam Preparation | High Pass-Rate Mobile-Solutions-Architecture-Designer Latest Braindumps Questions: Salesforce Certified Mobile Solutions Architecture Designer
However, with the help of the best training materials, you can completely pass Salesforce Mobile-Solutions-Architecture-Designer test in a short period of time, Especially those who study while working, you can save a lot of time easily.
Using Ce-Isareti can quickly help you get the Google-Workspace-Administrator Reliable Test Cost certificate you want, Every subtle change in the mainstream of the knowledge about the Mobile-Solutions-Architecture-Designer certification will be caught and we try our best to search the Mobile-Solutions-Architecture-Designer study materials resources available to us.
Passing Mobile-Solutions-Architecture-Designer can be hard, and you won’t find such exam Mobile-Solutions-Architecture-Designer brain dumps anywhere, We are professional and authoritative exam dumps seller in this field.
Our website is a professional certification dumps provider that offer candidates Salesforce Mobile-Solutions-Architecture-Designer valid vce and Mobile-Solutions-Architecture-Designer exam pdf for achieving success in an effective way in the Mobile-Solutions-Architecture-Designer valid exam.
NEW QUESTION: 1
Which three are advantages of the Java exception mechanism?
A. Allows the creation of new exceptions that are tailored to the particular program being created
B. Provides a set of standard exceptions that covers all the possible errors
C. Improves the program structure because exceptions must be handled in the method in which they occurred
D. Improves the program structure because the error handling code is separated from the normal program function
E. Improves the program structure because the programmer can choose where to handle exceptions
Answer: A,D,E
Explanation:
B is false. Standard exceptions not cover all possible errors. D is false. Exceptions don't have to be handled in the method in which they occurred.
NEW QUESTION: 2
Which as-path access-list regular expression should be applied on R2 as a neighbor filter list to only allow updates with an origin of AS 65503?
Refer to the exhibit.
A.
What will you get with your purchase of the Unlimited Access Package for only $149.00?
- An overview of the Mobile-Solutions-Architecture-Designer 65503$
E. _65503.?$
F. _65503_
Answer: A
Explanation:
http://www.cisco.com/c/en/us/td/docs/ios/12_2/termserv/configuration/guide/ftersv_c/tcfaap re.htmlNEW QUESTION: 3
An engineer has integrated a new DMVPN to link remote offices across the internet using Cisco IOS routers. When connecting to remote sites, pings and voice data appear to flow properly and all tunnel stats seem to show that are up. However, when trying to connect to a remote server using RDP, the connection fails. Which action resolves this issue?
A. Add RDP port to the extended ACL.
B. Replace certificate on the RDP server.
C. Adjust the MTU size within the routers.
D. Change DMVPN timeout values.
Answer: BNEW QUESTION: 4
course through studying the questions and answers.
You manage a cloud service that has a web application named WebRole1.
WebRole1 writes error messages to the Windows Event Log.
Users report receiving an error page with the following message: "Event 26 has occurred.
Contact your system administrator."
You need to access the WebRole1 event log.
Which three actions should you perform? Each correct answer presents part of the solution.
A. Run the Enable-AzureWebsiteApplicationDiagnostic PowerShell cmdlet.
B. Create a storage account.
C. Update the cloud service definition file and the service configuration file.
D. Enable verbose monitoring.
E. Update the WebRole1 web.config file.
F. Run the Set-AzureVMDiagnosticsExtensionPowerShell cmdlet.
Answer: B,C,D
Explanation:
step 1 specify the scheduled TransferLogLevelFilter to Verbose in the diagnostics.wadcfg step 2 Update the cloud service definition file and the service configuration file (.cspkg) step 3 best practice is to create a separate storage account for logging diagnostics data
References: http://azure.microsoft.com/en-us/documentation/articles/cloud-services-how-to-monitor/ - A preview of actual Mobile-Solutions-Architecture-Designer 65503$
E. _65503.?$
F. _65503_
Answer: A
Explanation:
http://www.cisco.com/c/en/us/td/docs/ios/12_2/termserv/configuration/guide/ftersv_c/tcfaap re.htmlNEW QUESTION: 3
An engineer has integrated a new DMVPN to link remote offices across the internet using Cisco IOS routers. When connecting to remote sites, pings and voice data appear to flow properly and all tunnel stats seem to show that are up. However, when trying to connect to a remote server using RDP, the connection fails. Which action resolves this issue?
A. Add RDP port to the extended ACL.
B. Replace certificate on the RDP server.
C. Adjust the MTU size within the routers.
D. Change DMVPN timeout values.
Answer: BNEW QUESTION: 4
test questions
You manage a cloud service that has a web application named WebRole1.
WebRole1 writes error messages to the Windows Event Log.
Users report receiving an error page with the following message: "Event 26 has occurred.
Contact your system administrator."
You need to access the WebRole1 event log.
Which three actions should you perform? Each correct answer presents part of the solution.
A. Run the Enable-AzureWebsiteApplicationDiagnostic PowerShell cmdlet.
B. Create a storage account.
C. Update the cloud service definition file and the service configuration file.
D. Enable verbose monitoring.
E. Update the WebRole1 web.config file.
F. Run the Set-AzureVMDiagnosticsExtensionPowerShell cmdlet.
Answer: B,C,D
Explanation:
step 1 specify the scheduled TransferLogLevelFilter to Verbose in the diagnostics.wadcfg step 2 Update the cloud service definition file and the service configuration file (.cspkg) step 3 best practice is to create a separate storage account for logging diagnostics data
References: http://azure.microsoft.com/en-us/documentation/articles/cloud-services-how-to-monitor/ - Actual correct Mobile-Solutions-Architecture-Designer 65503$
E. _65503.?$
F. _65503_
Answer: A
Explanation:
http://www.cisco.com/c/en/us/td/docs/ios/12_2/termserv/configuration/guide/ftersv_c/tcfaap re.htmlNEW QUESTION: 3
An engineer has integrated a new DMVPN to link remote offices across the internet using Cisco IOS routers. When connecting to remote sites, pings and voice data appear to flow properly and all tunnel stats seem to show that are up. However, when trying to connect to a remote server using RDP, the connection fails. Which action resolves this issue?
A. Add RDP port to the extended ACL.
B. Replace certificate on the RDP server.
C. Adjust the MTU size within the routers.
D. Change DMVPN timeout values.
Answer: BNEW QUESTION: 4
answers to the latest 65503$
You manage a cloud service that has a web application named WebRole1.
WebRole1 writes error messages to the Windows Event Log.
Users report receiving an error page with the following message: "Event 26 has occurred.
Contact your system administrator."
You need to access the WebRole1 event log.
Which three actions should you perform? Each correct answer presents part of the solution.
A. Run the Enable-AzureWebsiteApplicationDiagnostic PowerShell cmdlet.
B. Create a storage account.
C. Update the cloud service definition file and the service configuration file.
D. Enable verbose monitoring.
E. Update the WebRole1 web.config file.
F. Run the Set-AzureVMDiagnosticsExtensionPowerShell cmdlet.
Answer: B,C,D
Explanation:
step 1 specify the scheduled TransferLogLevelFilter to Verbose in the diagnostics.wadcfg step 2 Update the cloud service definition file and the service configuration file (.cspkg) step 3 best practice is to create a separate storage account for logging diagnostics data
References: http://azure.microsoft.com/en-us/documentation/articles/cloud-services-how-to-monitor/
E. _65503.?$
F. _65503_
Answer: A
Explanation:
http://www.cisco.com/c/en/us/td/docs/ios/12_2/termserv/configuration/guide/ftersv_c/tcfaap re.htmlNEW QUESTION: 3
An engineer has integrated a new DMVPN to link remote offices across the internet using Cisco IOS routers. When connecting to remote sites, pings and voice data appear to flow properly and all tunnel stats seem to show that are up. However, when trying to connect to a remote server using RDP, the connection fails. Which action resolves this issue?
A. Add RDP port to the extended ACL.
B. Replace certificate on the RDP server.
C. Adjust the MTU size within the routers.
D. Change DMVPN timeout values.
Answer: BNEW QUESTION: 4
questions
You manage a cloud service that has a web application named WebRole1.
WebRole1 writes error messages to the Windows Event Log.
Users report receiving an error page with the following message: "Event 26 has occurred.
Contact your system administrator."
You need to access the WebRole1 event log.
Which three actions should you perform? Each correct answer presents part of the solution.
A. Run the Enable-AzureWebsiteApplicationDiagnostic PowerShell cmdlet.
B. Create a storage account.
C. Update the cloud service definition file and the service configuration file.
D. Enable verbose monitoring.
E. Update the WebRole1 web.config file.
F. Run the Set-AzureVMDiagnosticsExtensionPowerShell cmdlet.
Answer: B,C,D
Explanation:
step 1 specify the scheduled TransferLogLevelFilter to Verbose in the diagnostics.wadcfg step 2 Update the cloud service definition file and the service configuration file (.cspkg) step 3 best practice is to create a separate storage account for logging diagnostics data
References: http://azure.microsoft.com/en-us/documentation/articles/cloud-services-how-to-monitor/
Our Unlimited Access Package will prepare you for your exam with guaranteed results, surpassing other Mobile-Solutions-Architecture-Designer 65503$
E. _65503.?$
F. _65503_
Answer: A
Explanation:
http://www.cisco.com/c/en/us/td/docs/ios/12_2/termserv/configuration/guide/ftersv_c/tcfaap re.html
NEW QUESTION: 3
An engineer has integrated a new DMVPN to link remote offices across the internet using Cisco IOS routers. When connecting to remote sites, pings and voice data appear to flow properly and all tunnel stats seem to show that are up. However, when trying to connect to a remote server using RDP, the connection fails. Which action resolves this issue?
A. Add RDP port to the extended ACL.
B. Replace certificate on the RDP server.
C. Adjust the MTU size within the routers.
D. Change DMVPN timeout values.
Answer: B
NEW QUESTION: 4
You manage a cloud service that has a web application named WebRole1.
WebRole1 writes error messages to the Windows Event Log.
Users report receiving an error page with the following message: "Event 26 has occurred.
Contact your system administrator."
You need to access the WebRole1 event log.
Which three actions should you perform? Each correct answer presents part of the solution.
A. Run the Enable-AzureWebsiteApplicationDiagnostic PowerShell cmdlet.
B. Create a storage account.
C. Update the cloud service definition file and the service configuration file.
D. Enable verbose monitoring.
E. Update the WebRole1 web.config file.
F. Run the Set-AzureVMDiagnosticsExtensionPowerShell cmdlet.
Answer: B,C,D
Explanation:
step 1 specify the scheduled TransferLogLevelFilter to Verbose in the diagnostics.wadcfg step 2 Update the cloud service definition file and the service configuration file (.cspkg) step 3 best practice is to create a separate storage account for logging diagnostics data
References: http://azure.microsoft.com/en-us/documentation/articles/cloud-services-how-to-monitor/
E. _65503.?$
F. _65503_
Answer: A
Explanation:
http://www.cisco.com/c/en/us/td/docs/ios/12_2/termserv/configuration/guide/ftersv_c/tcfaap re.html
NEW QUESTION: 3
An engineer has integrated a new DMVPN to link remote offices across the internet using Cisco IOS routers. When connecting to remote sites, pings and voice data appear to flow properly and all tunnel stats seem to show that are up. However, when trying to connect to a remote server using RDP, the connection fails. Which action resolves this issue?
A. Add RDP port to the extended ACL.
B. Replace certificate on the RDP server.
C. Adjust the MTU size within the routers.
D. Change DMVPN timeout values.
Answer: B
NEW QUESTION: 4
You manage a cloud service that has a web application named WebRole1.
WebRole1 writes error messages to the Windows Event Log.
Users report receiving an error page with the following message: "Event 26 has occurred.
Contact your system administrator."
You need to access the WebRole1 event log.
Which three actions should you perform? Each correct answer presents part of the solution.
A. Run the Enable-AzureWebsiteApplicationDiagnostic PowerShell cmdlet.
B. Create a storage account.
C. Update the cloud service definition file and the service configuration file.
D. Enable verbose monitoring.
E. Update the WebRole1 web.config file.
F. Run the Set-AzureVMDiagnosticsExtensionPowerShell cmdlet.
Answer: B,C,D
Explanation:
step 1 specify the scheduled TransferLogLevelFilter to Verbose in the diagnostics.wadcfg step 2 Update the cloud service definition file and the service configuration file (.cspkg) step 3 best practice is to create a separate storage account for logging diagnostics data
References: http://azure.microsoft.com/en-us/documentation/articles/cloud-services-how-to-monitor/
E. _65503.?$
F. _65503_
Answer: A
Explanation:
http://www.cisco.com/c/en/us/td/docs/ios/12_2/termserv/configuration/guide/ftersv_c/tcfaap re.html
NEW QUESTION: 3
An engineer has integrated a new DMVPN to link remote offices across the internet using Cisco IOS routers. When connecting to remote sites, pings and voice data appear to flow properly and all tunnel stats seem to show that are up. However, when trying to connect to a remote server using RDP, the connection fails. Which action resolves this issue?
A. Add RDP port to the extended ACL.
B. Replace certificate on the RDP server.
C. Adjust the MTU size within the routers.
D. Change DMVPN timeout values.
Answer: B
NEW QUESTION: 4
You manage a cloud service that has a web application named WebRole1.
WebRole1 writes error messages to the Windows Event Log.
Users report receiving an error page with the following message: "Event 26 has occurred.
Contact your system administrator."
You need to access the WebRole1 event log.
Which three actions should you perform? Each correct answer presents part of the solution.
A. Run the Enable-AzureWebsiteApplicationDiagnostic PowerShell cmdlet.
B. Create a storage account.
C. Update the cloud service definition file and the service configuration file.
D. Enable verbose monitoring.
E. Update the WebRole1 web.config file.
F. Run the Set-AzureVMDiagnosticsExtensionPowerShell cmdlet.
Answer: B,C,D
Explanation:
step 1 specify the scheduled TransferLogLevelFilter to Verbose in the diagnostics.wadcfg step 2 Update the cloud service definition file and the service configuration file (.cspkg) step 3 best practice is to create a separate storage account for logging diagnostics data
References: http://azure.microsoft.com/en-us/documentation/articles/cloud-services-how-to-monitor/
E. _65503.?$
F. _65503_
Answer: A
Explanation:
http://www.cisco.com/c/en/us/td/docs/ios/12_2/termserv/configuration/guide/ftersv_c/tcfaap re.html
NEW QUESTION: 3
An engineer has integrated a new DMVPN to link remote offices across the internet using Cisco IOS routers. When connecting to remote sites, pings and voice data appear to flow properly and all tunnel stats seem to show that are up. However, when trying to connect to a remote server using RDP, the connection fails. Which action resolves this issue?
A. Add RDP port to the extended ACL.
B. Replace certificate on the RDP server.
C. Adjust the MTU size within the routers.
D. Change DMVPN timeout values.
Answer: B
NEW QUESTION: 4
You manage a cloud service that has a web application named WebRole1.
WebRole1 writes error messages to the Windows Event Log.
Users report receiving an error page with the following message: "Event 26 has occurred.
Contact your system administrator."
You need to access the WebRole1 event log.
Which three actions should you perform? Each correct answer presents part of the solution.
A. Run the Enable-AzureWebsiteApplicationDiagnostic PowerShell cmdlet.
B. Create a storage account.
C. Update the cloud service definition file and the service configuration file.
D. Enable verbose monitoring.
E. Update the WebRole1 web.config file.
F. Run the Set-AzureVMDiagnosticsExtensionPowerShell cmdlet.
Answer: B,C,D
Explanation:
step 1 specify the scheduled TransferLogLevelFilter to Verbose in the diagnostics.wadcfg step 2 Update the cloud service definition file and the service configuration file (.cspkg) step 3 best practice is to create a separate storage account for logging diagnostics data
References: http://azure.microsoft.com/en-us/documentation/articles/cloud-services-how-to-monitor/
E. _65503.?$
F. _65503_
Answer: A
Explanation:
http://www.cisco.com/c/en/us/td/docs/ios/12_2/termserv/configuration/guide/ftersv_c/tcfaap re.html
NEW QUESTION: 3
An engineer has integrated a new DMVPN to link remote offices across the internet using Cisco IOS routers. When connecting to remote sites, pings and voice data appear to flow properly and all tunnel stats seem to show that are up. However, when trying to connect to a remote server using RDP, the connection fails. Which action resolves this issue?
A. Add RDP port to the extended ACL.
B. Replace certificate on the RDP server.
C. Adjust the MTU size within the routers.
D. Change DMVPN timeout values.
Answer: B
NEW QUESTION: 4
You manage a cloud service that has a web application named WebRole1.
WebRole1 writes error messages to the Windows Event Log.
Users report receiving an error page with the following message: "Event 26 has occurred.
Contact your system administrator."
You need to access the WebRole1 event log.
Which three actions should you perform? Each correct answer presents part of the solution.
A. Run the Enable-AzureWebsiteApplicationDiagnostic PowerShell cmdlet.
B. Create a storage account.
C. Update the cloud service definition file and the service configuration file.
D. Enable verbose monitoring.
E. Update the WebRole1 web.config file.
F. Run the Set-AzureVMDiagnosticsExtensionPowerShell cmdlet.
Answer: B,C,D
Explanation:
step 1 specify the scheduled TransferLogLevelFilter to Verbose in the diagnostics.wadcfg step 2 Update the cloud service definition file and the service configuration file (.cspkg) step 3 best practice is to create a separate storage account for logging diagnostics data
References: http://azure.microsoft.com/en-us/documentation/articles/cloud-services-how-to-monitor/
E. _65503.?$
F. _65503_
Answer: A
Explanation:
http://www.cisco.com/c/en/us/td/docs/ios/12_2/termserv/configuration/guide/ftersv_c/tcfaap re.html
NEW QUESTION: 3
An engineer has integrated a new DMVPN to link remote offices across the internet using Cisco IOS routers. When connecting to remote sites, pings and voice data appear to flow properly and all tunnel stats seem to show that are up. However, when trying to connect to a remote server using RDP, the connection fails. Which action resolves this issue?
A. Add RDP port to the extended ACL.
B. Replace certificate on the RDP server.
C. Adjust the MTU size within the routers.
D. Change DMVPN timeout values.
Answer: B
NEW QUESTION: 4
You manage a cloud service that has a web application named WebRole1.
WebRole1 writes error messages to the Windows Event Log.
Users report receiving an error page with the following message: "Event 26 has occurred.
Contact your system administrator."
You need to access the WebRole1 event log.
Which three actions should you perform? Each correct answer presents part of the solution.
A. Run the Enable-AzureWebsiteApplicationDiagnostic PowerShell cmdlet.
B. Create a storage account.
C. Update the cloud service definition file and the service configuration file.
D. Enable verbose monitoring.
E. Update the WebRole1 web.config file.
F. Run the Set-AzureVMDiagnosticsExtensionPowerShell cmdlet.
Answer: B,C,D
Explanation:
step 1 specify the scheduled TransferLogLevelFilter to Verbose in the diagnostics.wadcfg step 2 Update the cloud service definition file and the service configuration file (.cspkg) step 3 best practice is to create a separate storage account for logging diagnostics data
References: http://azure.microsoft.com/en-us/documentation/articles/cloud-services-how-to-monitor/
Skip all the worthless Mobile-Solutions-Architecture-Designer 65503$
E. _65503.?$
F. _65503_
Answer: A
Explanation:
http://www.cisco.com/c/en/us/td/docs/ios/12_2/termserv/configuration/guide/ftersv_c/tcfaap re.html
NEW QUESTION: 3
An engineer has integrated a new DMVPN to link remote offices across the internet using Cisco IOS routers. When connecting to remote sites, pings and voice data appear to flow properly and all tunnel stats seem to show that are up. However, when trying to connect to a remote server using RDP, the connection fails. Which action resolves this issue?
A. Add RDP port to the extended ACL.
B. Replace certificate on the RDP server.
C. Adjust the MTU size within the routers.
D. Change DMVPN timeout values.
Answer: B
NEW QUESTION: 4
You manage a cloud service that has a web application named WebRole1.
WebRole1 writes error messages to the Windows Event Log.
Users report receiving an error page with the following message: "Event 26 has occurred.
Contact your system administrator."
You need to access the WebRole1 event log.
Which three actions should you perform? Each correct answer presents part of the solution.
A. Run the Enable-AzureWebsiteApplicationDiagnostic PowerShell cmdlet.
B. Create a storage account.
C. Update the cloud service definition file and the service configuration file.
D. Enable verbose monitoring.
E. Update the WebRole1 web.config file.
F. Run the Set-AzureVMDiagnosticsExtensionPowerShell cmdlet.
Answer: B,C,D
Explanation:
step 1 specify the scheduled TransferLogLevelFilter to Verbose in the diagnostics.wadcfg step 2 Update the cloud service definition file and the service configuration file (.cspkg) step 3 best practice is to create a separate storage account for logging diagnostics data
References: http://azure.microsoft.com/en-us/documentation/articles/cloud-services-how-to-monitor/
- C_THR85_2311 Test Dump
- AZ-104 New Soft Simulations
- C-THR81-2311 Interactive Practice Exam
- 102-500 Test Questions
- Study CIPP-C Demo
- SC-200 Reliable Test Pattern
- Demo 3V0-42.23 Test
- New C-THR12-2311 Exam Dumps
- CV0-004 Exam Test
- Data-Cloud-Consultant Reliable Test Sims
- Exam Dumps H13-629_V3.0 Collection
- GSEC Practice Engine
- Certification PAM-SEN Test Answers
- New Exam 1z1-829 Braindumps
- Valid Test C_S4CWM_2308 Bootcamp
- 010-160 Latest Test Questions
- E-BW4HANA214 Valid Exam Voucher
- Exam Dumps SK0-005 Pdf
- CRT-101 Detail Explanation
- Exam MB-300 Quiz
- Latest DP-300 Learning Material
- APM-PFQ Exam Engine
- 1z0-1033-22 Reliable Study Guide
- ICS-SCADA Valid Test Discount
65503$
E. _65503.?$
F. _65503_
Answer: A
Explanation:
http://www.cisco.com/c/en/us/td/docs/ios/12_2/termserv/configuration/guide/ftersv_c/tcfaap re.html
NEW QUESTION: 3
An engineer has integrated a new DMVPN to link remote offices across the internet using Cisco IOS routers. When connecting to remote sites, pings and voice data appear to flow properly and all tunnel stats seem to show that are up. However, when trying to connect to a remote server using RDP, the connection fails. Which action resolves this issue?
A. Add RDP port to the extended ACL.
B. Replace certificate on the RDP server.
C. Adjust the MTU size within the routers.
D. Change DMVPN timeout values.
Answer: B
NEW QUESTION: 4
You manage a cloud service that has a web application named WebRole1.
WebRole1 writes error messages to the Windows Event Log.
Users report receiving an error page with the following message: "Event 26 has occurred.
Contact your system administrator."
You need to access the WebRole1 event log.
Which three actions should you perform? Each correct answer presents part of the solution.
A. Run the Enable-AzureWebsiteApplicationDiagnostic PowerShell cmdlet.
B. Create a storage account.
C. Update the cloud service definition file and the service configuration file.
D. Enable verbose monitoring.
E. Update the WebRole1 web.config file.
F. Run the Set-AzureVMDiagnosticsExtensionPowerShell cmdlet.
Answer: B,C,D
Explanation:
step 1 specify the scheduled TransferLogLevelFilter to Verbose in the diagnostics.wadcfg step 2 Update the cloud service definition file and the service configuration file (.cspkg) step 3 best practice is to create a separate storage account for logging diagnostics data
References: http://azure.microsoft.com/en-us/documentation/articles/cloud-services-how-to-monitor/
Difficulty finding the right Mobile-Solutions-Architecture-Designer 65503$
E. _65503.?$
F. _65503_
Answer: A
Explanation:
http://www.cisco.com/c/en/us/td/docs/ios/12_2/termserv/configuration/guide/ftersv_c/tcfaap re.html
NEW QUESTION: 3
An engineer has integrated a new DMVPN to link remote offices across the internet using Cisco IOS routers. When connecting to remote sites, pings and voice data appear to flow properly and all tunnel stats seem to show that are up. However, when trying to connect to a remote server using RDP, the connection fails. Which action resolves this issue?
A. Add RDP port to the extended ACL.
B. Replace certificate on the RDP server.
C. Adjust the MTU size within the routers.
D. Change DMVPN timeout values.
Answer: B
NEW QUESTION: 4
You manage a cloud service that has a web application named WebRole1.
WebRole1 writes error messages to the Windows Event Log.
Users report receiving an error page with the following message: "Event 26 has occurred.
Contact your system administrator."
You need to access the WebRole1 event log.
Which three actions should you perform? Each correct answer presents part of the solution.
A. Run the Enable-AzureWebsiteApplicationDiagnostic PowerShell cmdlet.
B. Create a storage account.
C. Update the cloud service definition file and the service configuration file.
D. Enable verbose monitoring.
E. Update the WebRole1 web.config file.
F. Run the Set-AzureVMDiagnosticsExtensionPowerShell cmdlet.
Answer: B,C,D
Explanation:
step 1 specify the scheduled TransferLogLevelFilter to Verbose in the diagnostics.wadcfg step 2 Update the cloud service definition file and the service configuration file (.cspkg) step 3 best practice is to create a separate storage account for logging diagnostics data
References: http://azure.microsoft.com/en-us/documentation/articles/cloud-services-how-to-monitor/
E. _65503.?$
F. _65503_
Answer: A
Explanation:
http://www.cisco.com/c/en/us/td/docs/ios/12_2/termserv/configuration/guide/ftersv_c/tcfaap re.html
NEW QUESTION: 3
An engineer has integrated a new DMVPN to link remote offices across the internet using Cisco IOS routers. When connecting to remote sites, pings and voice data appear to flow properly and all tunnel stats seem to show that are up. However, when trying to connect to a remote server using RDP, the connection fails. Which action resolves this issue?
A. Add RDP port to the extended ACL.
B. Replace certificate on the RDP server.
C. Adjust the MTU size within the routers.
D. Change DMVPN timeout values.
Answer: B
NEW QUESTION: 4
You manage a cloud service that has a web application named WebRole1.
WebRole1 writes error messages to the Windows Event Log.
Users report receiving an error page with the following message: "Event 26 has occurred.
Contact your system administrator."
You need to access the WebRole1 event log.
Which three actions should you perform? Each correct answer presents part of the solution.
A. Run the Enable-AzureWebsiteApplicationDiagnostic PowerShell cmdlet.
B. Create a storage account.
C. Update the cloud service definition file and the service configuration file.
D. Enable verbose monitoring.
E. Update the WebRole1 web.config file.
F. Run the Set-AzureVMDiagnosticsExtensionPowerShell cmdlet.
Answer: B,C,D
Explanation:
step 1 specify the scheduled TransferLogLevelFilter to Verbose in the diagnostics.wadcfg step 2 Update the cloud service definition file and the service configuration file (.cspkg) step 3 best practice is to create a separate storage account for logging diagnostics data
References: http://azure.microsoft.com/en-us/documentation/articles/cloud-services-how-to-monitor/
E. _65503.?$
F. _65503_
Answer: A
Explanation:
http://www.cisco.com/c/en/us/td/docs/ios/12_2/termserv/configuration/guide/ftersv_c/tcfaap re.html
NEW QUESTION: 3
An engineer has integrated a new DMVPN to link remote offices across the internet using Cisco IOS routers. When connecting to remote sites, pings and voice data appear to flow properly and all tunnel stats seem to show that are up. However, when trying to connect to a remote server using RDP, the connection fails. Which action resolves this issue?
A. Add RDP port to the extended ACL.
B. Replace certificate on the RDP server.
C. Adjust the MTU size within the routers.
D. Change DMVPN timeout values.
Answer: B
NEW QUESTION: 4
You manage a cloud service that has a web application named WebRole1.
WebRole1 writes error messages to the Windows Event Log.
Users report receiving an error page with the following message: "Event 26 has occurred.
Contact your system administrator."
You need to access the WebRole1 event log.
Which three actions should you perform? Each correct answer presents part of the solution.
A. Run the Enable-AzureWebsiteApplicationDiagnostic PowerShell cmdlet.
B. Create a storage account.
C. Update the cloud service definition file and the service configuration file.
D. Enable verbose monitoring.
E. Update the WebRole1 web.config file.
F. Run the Set-AzureVMDiagnosticsExtensionPowerShell cmdlet.
Answer: B,C,D
Explanation:
step 1 specify the scheduled TransferLogLevelFilter to Verbose in the diagnostics.wadcfg step 2 Update the cloud service definition file and the service configuration file (.cspkg) step 3 best practice is to create a separate storage account for logging diagnostics data
References: http://azure.microsoft.com/en-us/documentation/articles/cloud-services-how-to-monitor/
E. _65503.?$
F. _65503_
Answer: A
Explanation:
http://www.cisco.com/c/en/us/td/docs/ios/12_2/termserv/configuration/guide/ftersv_c/tcfaap re.html
NEW QUESTION: 3
An engineer has integrated a new DMVPN to link remote offices across the internet using Cisco IOS routers. When connecting to remote sites, pings and voice data appear to flow properly and all tunnel stats seem to show that are up. However, when trying to connect to a remote server using RDP, the connection fails. Which action resolves this issue?
A. Add RDP port to the extended ACL.
B. Replace certificate on the RDP server.
C. Adjust the MTU size within the routers.
D. Change DMVPN timeout values.
Answer: B
NEW QUESTION: 4
You manage a cloud service that has a web application named WebRole1.
WebRole1 writes error messages to the Windows Event Log.
Users report receiving an error page with the following message: "Event 26 has occurred.
Contact your system administrator."
You need to access the WebRole1 event log.
Which three actions should you perform? Each correct answer presents part of the solution.
A. Run the Enable-AzureWebsiteApplicationDiagnostic PowerShell cmdlet.
B. Create a storage account.
C. Update the cloud service definition file and the service configuration file.
D. Enable verbose monitoring.
E. Update the WebRole1 web.config file.
F. Run the Set-AzureVMDiagnosticsExtensionPowerShell cmdlet.
Answer: B,C,D
Explanation:
step 1 specify the scheduled TransferLogLevelFilter to Verbose in the diagnostics.wadcfg step 2 Update the cloud service definition file and the service configuration file (.cspkg) step 3 best practice is to create a separate storage account for logging diagnostics data
References: http://azure.microsoft.com/en-us/documentation/articles/cloud-services-how-to-monitor/
- C_THR85_2311 Test Dump
- AZ-104 New Soft Simulations
- C-THR81-2311 Interactive Practice Exam
- 102-500 Test Questions
- Study CIPP-C Demo
- SC-200 Reliable Test Pattern
- Demo 3V0-42.23 Test
- New C-THR12-2311 Exam Dumps
- CV0-004 Exam Test
- Data-Cloud-Consultant Reliable Test Sims
- Exam Dumps H13-629_V3.0 Collection
- GSEC Practice Engine
- Certification PAM-SEN Test Answers
- New Exam 1z1-829 Braindumps
- Valid Test C_S4CWM_2308 Bootcamp
- 010-160 Latest Test Questions
- E-BW4HANA214 Valid Exam Voucher
- Exam Dumps SK0-005 Pdf
- CRT-101 Detail Explanation
- Exam MB-300 Quiz
- Latest DP-300 Learning Material
- APM-PFQ Exam Engine
- 1z0-1033-22 Reliable Study Guide
- ICS-SCADA Valid Test Discount
E. _65503.?$
F. _65503_
Answer: A
Explanation:
http://www.cisco.com/c/en/us/td/docs/ios/12_2/termserv/configuration/guide/ftersv_c/tcfaap re.html
NEW QUESTION: 3
An engineer has integrated a new DMVPN to link remote offices across the internet using Cisco IOS routers. When connecting to remote sites, pings and voice data appear to flow properly and all tunnel stats seem to show that are up. However, when trying to connect to a remote server using RDP, the connection fails. Which action resolves this issue?
A. Add RDP port to the extended ACL.
B. Replace certificate on the RDP server.
C. Adjust the MTU size within the routers.
D. Change DMVPN timeout values.
Answer: B
NEW QUESTION: 4
You manage a cloud service that has a web application named WebRole1.
WebRole1 writes error messages to the Windows Event Log.
Users report receiving an error page with the following message: "Event 26 has occurred.
Contact your system administrator."
You need to access the WebRole1 event log.
Which three actions should you perform? Each correct answer presents part of the solution.
A. Run the Enable-AzureWebsiteApplicationDiagnostic PowerShell cmdlet.
B. Create a storage account.
C. Update the cloud service definition file and the service configuration file.
D. Enable verbose monitoring.
E. Update the WebRole1 web.config file.
F. Run the Set-AzureVMDiagnosticsExtensionPowerShell cmdlet.
Answer: B,C,D
Explanation:
step 1 specify the scheduled TransferLogLevelFilter to Verbose in the diagnostics.wadcfg step 2 Update the cloud service definition file and the service configuration file (.cspkg) step 3 best practice is to create a separate storage account for logging diagnostics data
References: http://azure.microsoft.com/en-us/documentation/articles/cloud-services-how-to-monitor/
- C_THR85_2311 Test Dump
- AZ-104 New Soft Simulations
- C-THR81-2311 Interactive Practice Exam
- 102-500 Test Questions
- Study CIPP-C Demo
- SC-200 Reliable Test Pattern
- Demo 3V0-42.23 Test
- New C-THR12-2311 Exam Dumps
- CV0-004 Exam Test
- Data-Cloud-Consultant Reliable Test Sims
- Exam Dumps H13-629_V3.0 Collection
- GSEC Practice Engine
- Certification PAM-SEN Test Answers
- New Exam 1z1-829 Braindumps
- Valid Test C_S4CWM_2308 Bootcamp
- 010-160 Latest Test Questions
- E-BW4HANA214 Valid Exam Voucher
- Exam Dumps SK0-005 Pdf
- CRT-101 Detail Explanation
- Exam MB-300 Quiz
- Latest DP-300 Learning Material
- APM-PFQ Exam Engine
- 1z0-1033-22 Reliable Study Guide
- ICS-SCADA Valid Test Discount
E. _65503.?$
F. _65503_
Answer: A
Explanation:
http://www.cisco.com/c/en/us/td/docs/ios/12_2/termserv/configuration/guide/ftersv_c/tcfaap re.html
NEW QUESTION: 3
An engineer has integrated a new DMVPN to link remote offices across the internet using Cisco IOS routers. When connecting to remote sites, pings and voice data appear to flow properly and all tunnel stats seem to show that are up. However, when trying to connect to a remote server using RDP, the connection fails. Which action resolves this issue?
A. Add RDP port to the extended ACL.
B. Replace certificate on the RDP server.
C. Adjust the MTU size within the routers.
D. Change DMVPN timeout values.
Answer: B
NEW QUESTION: 4
You manage a cloud service that has a web application named WebRole1.
WebRole1 writes error messages to the Windows Event Log.
Users report receiving an error page with the following message: "Event 26 has occurred.
Contact your system administrator."
You need to access the WebRole1 event log.
Which three actions should you perform? Each correct answer presents part of the solution.
A. Run the Enable-AzureWebsiteApplicationDiagnostic PowerShell cmdlet.
B. Create a storage account.
C. Update the cloud service definition file and the service configuration file.
D. Enable verbose monitoring.
E. Update the WebRole1 web.config file.
F. Run the Set-AzureVMDiagnosticsExtensionPowerShell cmdlet.
Answer: B,C,D
Explanation:
step 1 specify the scheduled TransferLogLevelFilter to Verbose in the diagnostics.wadcfg step 2 Update the cloud service definition file and the service configuration file (.cspkg) step 3 best practice is to create a separate storage account for logging diagnostics data
References: http://azure.microsoft.com/en-us/documentation/articles/cloud-services-how-to-monitor/
E. _65503.?$
F. _65503_
Answer: A
Explanation:
http://www.cisco.com/c/en/us/td/docs/ios/12_2/termserv/configuration/guide/ftersv_c/tcfaap re.html
NEW QUESTION: 3
An engineer has integrated a new DMVPN to link remote offices across the internet using Cisco IOS routers. When connecting to remote sites, pings and voice data appear to flow properly and all tunnel stats seem to show that are up. However, when trying to connect to a remote server using RDP, the connection fails. Which action resolves this issue?
A. Add RDP port to the extended ACL.
B. Replace certificate on the RDP server.
C. Adjust the MTU size within the routers.
D. Change DMVPN timeout values.
Answer: B
NEW QUESTION: 4
You manage a cloud service that has a web application named WebRole1.
WebRole1 writes error messages to the Windows Event Log.
Users report receiving an error page with the following message: "Event 26 has occurred.
Contact your system administrator."
You need to access the WebRole1 event log.
Which three actions should you perform? Each correct answer presents part of the solution.
A. Run the Enable-AzureWebsiteApplicationDiagnostic PowerShell cmdlet.
B. Create a storage account.
C. Update the cloud service definition file and the service configuration file.
D. Enable verbose monitoring.
E. Update the WebRole1 web.config file.
F. Run the Set-AzureVMDiagnosticsExtensionPowerShell cmdlet.
Answer: B,C,D
Explanation:
step 1 specify the scheduled TransferLogLevelFilter to Verbose in the diagnostics.wadcfg step 2 Update the cloud service definition file and the service configuration file (.cspkg) step 3 best practice is to create a separate storage account for logging diagnostics data
References: http://azure.microsoft.com/en-us/documentation/articles/cloud-services-how-to-monitor/
E. _65503.?$
F. _65503_
Answer: A
Explanation:
http://www.cisco.com/c/en/us/td/docs/ios/12_2/termserv/configuration/guide/ftersv_c/tcfaap re.html
NEW QUESTION: 3
An engineer has integrated a new DMVPN to link remote offices across the internet using Cisco IOS routers. When connecting to remote sites, pings and voice data appear to flow properly and all tunnel stats seem to show that are up. However, when trying to connect to a remote server using RDP, the connection fails. Which action resolves this issue?
A. Add RDP port to the extended ACL.
B. Replace certificate on the RDP server.
C. Adjust the MTU size within the routers.
D. Change DMVPN timeout values.
Answer: B
NEW QUESTION: 4
You manage a cloud service that has a web application named WebRole1.
WebRole1 writes error messages to the Windows Event Log.
Users report receiving an error page with the following message: "Event 26 has occurred.
Contact your system administrator."
You need to access the WebRole1 event log.
Which three actions should you perform? Each correct answer presents part of the solution.
A. Run the Enable-AzureWebsiteApplicationDiagnostic PowerShell cmdlet.
B. Create a storage account.
C. Update the cloud service definition file and the service configuration file.
D. Enable verbose monitoring.
E. Update the WebRole1 web.config file.
F. Run the Set-AzureVMDiagnosticsExtensionPowerShell cmdlet.
Answer: B,C,D
Explanation:
step 1 specify the scheduled TransferLogLevelFilter to Verbose in the diagnostics.wadcfg step 2 Update the cloud service definition file and the service configuration file (.cspkg) step 3 best practice is to create a separate storage account for logging diagnostics data
References: http://azure.microsoft.com/en-us/documentation/articles/cloud-services-how-to-monitor/
65503$
E. _65503.?$
F. _65503_
Answer: A
Explanation:
http://www.cisco.com/c/en/us/td/docs/ios/12_2/termserv/configuration/guide/ftersv_c/tcfaap re.html
NEW QUESTION: 3
An engineer has integrated a new DMVPN to link remote offices across the internet using Cisco IOS routers. When connecting to remote sites, pings and voice data appear to flow properly and all tunnel stats seem to show that are up. However, when trying to connect to a remote server using RDP, the connection fails. Which action resolves this issue?
A. Add RDP port to the extended ACL.
B. Replace certificate on the RDP server.
C. Adjust the MTU size within the routers.
D. Change DMVPN timeout values.
Answer: B
NEW QUESTION: 4
You manage a cloud service that has a web application named WebRole1.
WebRole1 writes error messages to the Windows Event Log.
Users report receiving an error page with the following message: "Event 26 has occurred.
Contact your system administrator."
You need to access the WebRole1 event log.
Which three actions should you perform? Each correct answer presents part of the solution.
A. Run the Enable-AzureWebsiteApplicationDiagnostic PowerShell cmdlet.
B. Create a storage account.
C. Update the cloud service definition file and the service configuration file.
D. Enable verbose monitoring.
E. Update the WebRole1 web.config file.
F. Run the Set-AzureVMDiagnosticsExtensionPowerShell cmdlet.
Answer: B,C,D
Explanation:
step 1 specify the scheduled TransferLogLevelFilter to Verbose in the diagnostics.wadcfg step 2 Update the cloud service definition file and the service configuration file (.cspkg) step 3 best practice is to create a separate storage account for logging diagnostics data
References: http://azure.microsoft.com/en-us/documentation/articles/cloud-services-how-to-monitor/
Still searching for Mobile-Solutions-Architecture-Designer 65503$
E. _65503.?$
F. _65503_
Answer: A
Explanation:
http://www.cisco.com/c/en/us/td/docs/ios/12_2/termserv/configuration/guide/ftersv_c/tcfaap re.html
NEW QUESTION: 3
An engineer has integrated a new DMVPN to link remote offices across the internet using Cisco IOS routers. When connecting to remote sites, pings and voice data appear to flow properly and all tunnel stats seem to show that are up. However, when trying to connect to a remote server using RDP, the connection fails. Which action resolves this issue?
A. Add RDP port to the extended ACL.
B. Replace certificate on the RDP server.
C. Adjust the MTU size within the routers.
D. Change DMVPN timeout values.
Answer: B
NEW QUESTION: 4
You manage a cloud service that has a web application named WebRole1.
WebRole1 writes error messages to the Windows Event Log.
Users report receiving an error page with the following message: "Event 26 has occurred.
Contact your system administrator."
You need to access the WebRole1 event log.
Which three actions should you perform? Each correct answer presents part of the solution.
A. Run the Enable-AzureWebsiteApplicationDiagnostic PowerShell cmdlet.
B. Create a storage account.
C. Update the cloud service definition file and the service configuration file.
D. Enable verbose monitoring.
E. Update the WebRole1 web.config file.
F. Run the Set-AzureVMDiagnosticsExtensionPowerShell cmdlet.
Answer: B,C,D
Explanation:
step 1 specify the scheduled TransferLogLevelFilter to Verbose in the diagnostics.wadcfg step 2 Update the cloud service definition file and the service configuration file (.cspkg) step 3 best practice is to create a separate storage account for logging diagnostics data
References: http://azure.microsoft.com/en-us/documentation/articles/cloud-services-how-to-monitor/
E. _65503.?$
F. _65503_
Answer: A
Explanation:
http://www.cisco.com/c/en/us/td/docs/ios/12_2/termserv/configuration/guide/ftersv_c/tcfaap re.html
NEW QUESTION: 3
An engineer has integrated a new DMVPN to link remote offices across the internet using Cisco IOS routers. When connecting to remote sites, pings and voice data appear to flow properly and all tunnel stats seem to show that are up. However, when trying to connect to a remote server using RDP, the connection fails. Which action resolves this issue?
A. Add RDP port to the extended ACL.
B. Replace certificate on the RDP server.
C. Adjust the MTU size within the routers.
D. Change DMVPN timeout values.
Answer: B
NEW QUESTION: 4
You manage a cloud service that has a web application named WebRole1.
WebRole1 writes error messages to the Windows Event Log.
Users report receiving an error page with the following message: "Event 26 has occurred.
Contact your system administrator."
You need to access the WebRole1 event log.
Which three actions should you perform? Each correct answer presents part of the solution.
A. Run the Enable-AzureWebsiteApplicationDiagnostic PowerShell cmdlet.
B. Create a storage account.
C. Update the cloud service definition file and the service configuration file.
D. Enable verbose monitoring.
E. Update the WebRole1 web.config file.
F. Run the Set-AzureVMDiagnosticsExtensionPowerShell cmdlet.
Answer: B,C,D
Explanation:
step 1 specify the scheduled TransferLogLevelFilter to Verbose in the diagnostics.wadcfg step 2 Update the cloud service definition file and the service configuration file (.cspkg) step 3 best practice is to create a separate storage account for logging diagnostics data
References: http://azure.microsoft.com/en-us/documentation/articles/cloud-services-how-to-monitor/
E. _65503.?$
F. _65503_
Answer: A
Explanation:
http://www.cisco.com/c/en/us/td/docs/ios/12_2/termserv/configuration/guide/ftersv_c/tcfaap re.html
NEW QUESTION: 3
An engineer has integrated a new DMVPN to link remote offices across the internet using Cisco IOS routers. When connecting to remote sites, pings and voice data appear to flow properly and all tunnel stats seem to show that are up. However, when trying to connect to a remote server using RDP, the connection fails. Which action resolves this issue?
A. Add RDP port to the extended ACL.
B. Replace certificate on the RDP server.
C. Adjust the MTU size within the routers.
D. Change DMVPN timeout values.
Answer: B
NEW QUESTION: 4
You manage a cloud service that has a web application named WebRole1.
WebRole1 writes error messages to the Windows Event Log.
Users report receiving an error page with the following message: "Event 26 has occurred.
Contact your system administrator."
You need to access the WebRole1 event log.
Which three actions should you perform? Each correct answer presents part of the solution.
A. Run the Enable-AzureWebsiteApplicationDiagnostic PowerShell cmdlet.
B. Create a storage account.
C. Update the cloud service definition file and the service configuration file.
D. Enable verbose monitoring.
E. Update the WebRole1 web.config file.
F. Run the Set-AzureVMDiagnosticsExtensionPowerShell cmdlet.
Answer: B,C,D
Explanation:
step 1 specify the scheduled TransferLogLevelFilter to Verbose in the diagnostics.wadcfg step 2 Update the cloud service definition file and the service configuration file (.cspkg) step 3 best practice is to create a separate storage account for logging diagnostics data
References: http://azure.microsoft.com/en-us/documentation/articles/cloud-services-how-to-monitor/
E. _65503.?$
F. _65503_
Answer: A
Explanation:
http://www.cisco.com/c/en/us/td/docs/ios/12_2/termserv/configuration/guide/ftersv_c/tcfaap re.html
NEW QUESTION: 3
An engineer has integrated a new DMVPN to link remote offices across the internet using Cisco IOS routers. When connecting to remote sites, pings and voice data appear to flow properly and all tunnel stats seem to show that are up. However, when trying to connect to a remote server using RDP, the connection fails. Which action resolves this issue?
A. Add RDP port to the extended ACL.
B. Replace certificate on the RDP server.
C. Adjust the MTU size within the routers.
D. Change DMVPN timeout values.
Answer: B
NEW QUESTION: 4
You manage a cloud service that has a web application named WebRole1.
WebRole1 writes error messages to the Windows Event Log.
Users report receiving an error page with the following message: "Event 26 has occurred.
Contact your system administrator."
You need to access the WebRole1 event log.
Which three actions should you perform? Each correct answer presents part of the solution.
A. Run the Enable-AzureWebsiteApplicationDiagnostic PowerShell cmdlet.
B. Create a storage account.
C. Update the cloud service definition file and the service configuration file.
D. Enable verbose monitoring.
E. Update the WebRole1 web.config file.
F. Run the Set-AzureVMDiagnosticsExtensionPowerShell cmdlet.
Answer: B,C,D
Explanation:
step 1 specify the scheduled TransferLogLevelFilter to Verbose in the diagnostics.wadcfg step 2 Update the cloud service definition file and the service configuration file (.cspkg) step 3 best practice is to create a separate storage account for logging diagnostics data
References: http://azure.microsoft.com/en-us/documentation/articles/cloud-services-how-to-monitor/
E. _65503.?$
F. _65503_
Answer: A
Explanation:
http://www.cisco.com/c/en/us/td/docs/ios/12_2/termserv/configuration/guide/ftersv_c/tcfaap re.html
NEW QUESTION: 3
An engineer has integrated a new DMVPN to link remote offices across the internet using Cisco IOS routers. When connecting to remote sites, pings and voice data appear to flow properly and all tunnel stats seem to show that are up. However, when trying to connect to a remote server using RDP, the connection fails. Which action resolves this issue?
A. Add RDP port to the extended ACL.
B. Replace certificate on the RDP server.
C. Adjust the MTU size within the routers.
D. Change DMVPN timeout values.
Answer: B
NEW QUESTION: 4
You manage a cloud service that has a web application named WebRole1.
WebRole1 writes error messages to the Windows Event Log.
Users report receiving an error page with the following message: "Event 26 has occurred.
Contact your system administrator."
You need to access the WebRole1 event log.
Which three actions should you perform? Each correct answer presents part of the solution.
A. Run the Enable-AzureWebsiteApplicationDiagnostic PowerShell cmdlet.
B. Create a storage account.
C. Update the cloud service definition file and the service configuration file.
D. Enable verbose monitoring.
E. Update the WebRole1 web.config file.
F. Run the Set-AzureVMDiagnosticsExtensionPowerShell cmdlet.
Answer: B,C,D
Explanation:
step 1 specify the scheduled TransferLogLevelFilter to Verbose in the diagnostics.wadcfg step 2 Update the cloud service definition file and the service configuration file (.cspkg) step 3 best practice is to create a separate storage account for logging diagnostics data
References: http://azure.microsoft.com/en-us/documentation/articles/cloud-services-how-to-monitor/
E. _65503.?$
F. _65503_
Answer: A
Explanation:
http://www.cisco.com/c/en/us/td/docs/ios/12_2/termserv/configuration/guide/ftersv_c/tcfaap re.html
NEW QUESTION: 3
An engineer has integrated a new DMVPN to link remote offices across the internet using Cisco IOS routers. When connecting to remote sites, pings and voice data appear to flow properly and all tunnel stats seem to show that are up. However, when trying to connect to a remote server using RDP, the connection fails. Which action resolves this issue?
A. Add RDP port to the extended ACL.
B. Replace certificate on the RDP server.
C. Adjust the MTU size within the routers.
D. Change DMVPN timeout values.
Answer: B
NEW QUESTION: 4
You manage a cloud service that has a web application named WebRole1.
WebRole1 writes error messages to the Windows Event Log.
Users report receiving an error page with the following message: "Event 26 has occurred.
Contact your system administrator."
You need to access the WebRole1 event log.
Which three actions should you perform? Each correct answer presents part of the solution.
A. Run the Enable-AzureWebsiteApplicationDiagnostic PowerShell cmdlet.
B. Create a storage account.
C. Update the cloud service definition file and the service configuration file.
D. Enable verbose monitoring.
E. Update the WebRole1 web.config file.
F. Run the Set-AzureVMDiagnosticsExtensionPowerShell cmdlet.
Answer: B,C,D
Explanation:
step 1 specify the scheduled TransferLogLevelFilter to Verbose in the diagnostics.wadcfg step 2 Update the cloud service definition file and the service configuration file (.cspkg) step 3 best practice is to create a separate storage account for logging diagnostics data
References: http://azure.microsoft.com/en-us/documentation/articles/cloud-services-how-to-monitor/
E. _65503.?$
F. _65503_
Answer: A
Explanation:
http://www.cisco.com/c/en/us/td/docs/ios/12_2/termserv/configuration/guide/ftersv_c/tcfaap re.html
NEW QUESTION: 3
An engineer has integrated a new DMVPN to link remote offices across the internet using Cisco IOS routers. When connecting to remote sites, pings and voice data appear to flow properly and all tunnel stats seem to show that are up. However, when trying to connect to a remote server using RDP, the connection fails. Which action resolves this issue?
A. Add RDP port to the extended ACL.
B. Replace certificate on the RDP server.
C. Adjust the MTU size within the routers.
D. Change DMVPN timeout values.
Answer: B
NEW QUESTION: 4
You manage a cloud service that has a web application named WebRole1.
WebRole1 writes error messages to the Windows Event Log.
Users report receiving an error page with the following message: "Event 26 has occurred.
Contact your system administrator."
You need to access the WebRole1 event log.
Which three actions should you perform? Each correct answer presents part of the solution.
A. Run the Enable-AzureWebsiteApplicationDiagnostic PowerShell cmdlet.
B. Create a storage account.
C. Update the cloud service definition file and the service configuration file.
D. Enable verbose monitoring.
E. Update the WebRole1 web.config file.
F. Run the Set-AzureVMDiagnosticsExtensionPowerShell cmdlet.
Answer: B,C,D
Explanation:
step 1 specify the scheduled TransferLogLevelFilter to Verbose in the diagnostics.wadcfg step 2 Update the cloud service definition file and the service configuration file (.cspkg) step 3 best practice is to create a separate storage account for logging diagnostics data
References: http://azure.microsoft.com/en-us/documentation/articles/cloud-services-how-to-monitor/
65503$
E. _65503.?$
F. _65503_
Answer: A
Explanation:
http://www.cisco.com/c/en/us/td/docs/ios/12_2/termserv/configuration/guide/ftersv_c/tcfaap re.html
NEW QUESTION: 3
An engineer has integrated a new DMVPN to link remote offices across the internet using Cisco IOS routers. When connecting to remote sites, pings and voice data appear to flow properly and all tunnel stats seem to show that are up. However, when trying to connect to a remote server using RDP, the connection fails. Which action resolves this issue?
A. Add RDP port to the extended ACL.
B. Replace certificate on the RDP server.
C. Adjust the MTU size within the routers.
D. Change DMVPN timeout values.
Answer: B
NEW QUESTION: 4
You manage a cloud service that has a web application named WebRole1.
WebRole1 writes error messages to the Windows Event Log.
Users report receiving an error page with the following message: "Event 26 has occurred.
Contact your system administrator."
You need to access the WebRole1 event log.
Which three actions should you perform? Each correct answer presents part of the solution.
A. Run the Enable-AzureWebsiteApplicationDiagnostic PowerShell cmdlet.
B. Create a storage account.
C. Update the cloud service definition file and the service configuration file.
D. Enable verbose monitoring.
E. Update the WebRole1 web.config file.
F. Run the Set-AzureVMDiagnosticsExtensionPowerShell cmdlet.
Answer: B,C,D
Explanation:
step 1 specify the scheduled TransferLogLevelFilter to Verbose in the diagnostics.wadcfg step 2 Update the cloud service definition file and the service configuration file (.cspkg) step 3 best practice is to create a separate storage account for logging diagnostics data
References: http://azure.microsoft.com/en-us/documentation/articles/cloud-services-how-to-monitor/
Keep walking if all you want is free Mobile-Solutions-Architecture-Designer 65503$
E. _65503.?$
F. _65503_
Answer: A
Explanation:
http://www.cisco.com/c/en/us/td/docs/ios/12_2/termserv/configuration/guide/ftersv_c/tcfaap re.html
NEW QUESTION: 3
An engineer has integrated a new DMVPN to link remote offices across the internet using Cisco IOS routers. When connecting to remote sites, pings and voice data appear to flow properly and all tunnel stats seem to show that are up. However, when trying to connect to a remote server using RDP, the connection fails. Which action resolves this issue?
A. Add RDP port to the extended ACL.
B. Replace certificate on the RDP server.
C. Adjust the MTU size within the routers.
D. Change DMVPN timeout values.
Answer: B
NEW QUESTION: 4
You manage a cloud service that has a web application named WebRole1.
WebRole1 writes error messages to the Windows Event Log.
Users report receiving an error page with the following message: "Event 26 has occurred.
Contact your system administrator."
You need to access the WebRole1 event log.
Which three actions should you perform? Each correct answer presents part of the solution.
A. Run the Enable-AzureWebsiteApplicationDiagnostic PowerShell cmdlet.
B. Create a storage account.
C. Update the cloud service definition file and the service configuration file.
D. Enable verbose monitoring.
E. Update the WebRole1 web.config file.
F. Run the Set-AzureVMDiagnosticsExtensionPowerShell cmdlet.
Answer: B,C,D
Explanation:
step 1 specify the scheduled TransferLogLevelFilter to Verbose in the diagnostics.wadcfg step 2 Update the cloud service definition file and the service configuration file (.cspkg) step 3 best practice is to create a separate storage account for logging diagnostics data
References: http://azure.microsoft.com/en-us/documentation/articles/cloud-services-how-to-monitor/
E. _65503.?$
F. _65503_
Answer: A
Explanation:
http://www.cisco.com/c/en/us/td/docs/ios/12_2/termserv/configuration/guide/ftersv_c/tcfaap re.html
NEW QUESTION: 3
An engineer has integrated a new DMVPN to link remote offices across the internet using Cisco IOS routers. When connecting to remote sites, pings and voice data appear to flow properly and all tunnel stats seem to show that are up. However, when trying to connect to a remote server using RDP, the connection fails. Which action resolves this issue?
A. Add RDP port to the extended ACL.
B. Replace certificate on the RDP server.
C. Adjust the MTU size within the routers.
D. Change DMVPN timeout values.
Answer: B
NEW QUESTION: 4
You manage a cloud service that has a web application named WebRole1.
WebRole1 writes error messages to the Windows Event Log.
Users report receiving an error page with the following message: "Event 26 has occurred.
Contact your system administrator."
You need to access the WebRole1 event log.
Which three actions should you perform? Each correct answer presents part of the solution.
A. Run the Enable-AzureWebsiteApplicationDiagnostic PowerShell cmdlet.
B. Create a storage account.
C. Update the cloud service definition file and the service configuration file.
D. Enable verbose monitoring.
E. Update the WebRole1 web.config file.
F. Run the Set-AzureVMDiagnosticsExtensionPowerShell cmdlet.
Answer: B,C,D
Explanation:
step 1 specify the scheduled TransferLogLevelFilter to Verbose in the diagnostics.wadcfg step 2 Update the cloud service definition file and the service configuration file (.cspkg) step 3 best practice is to create a separate storage account for logging diagnostics data
References: http://azure.microsoft.com/en-us/documentation/articles/cloud-services-how-to-monitor/
- C_THR85_2311 Test Dump
- AZ-104 New Soft Simulations
- C-THR81-2311 Interactive Practice Exam
- 102-500 Test Questions
- Study CIPP-C Demo
- SC-200 Reliable Test Pattern
- Demo 3V0-42.23 Test
- New C-THR12-2311 Exam Dumps
- CV0-004 Exam Test
- Data-Cloud-Consultant Reliable Test Sims
- Exam Dumps H13-629_V3.0 Collection
- GSEC Practice Engine
- Certification PAM-SEN Test Answers
- New Exam 1z1-829 Braindumps
- Valid Test C_S4CWM_2308 Bootcamp
- 010-160 Latest Test Questions
- E-BW4HANA214 Valid Exam Voucher
- Exam Dumps SK0-005 Pdf
- CRT-101 Detail Explanation
- Exam MB-300 Quiz
- Latest DP-300 Learning Material
- APM-PFQ Exam Engine
- 1z0-1033-22 Reliable Study Guide
- ICS-SCADA Valid Test Discount
E. _65503.?$
F. _65503_
Answer: A
Explanation:
http://www.cisco.com/c/en/us/td/docs/ios/12_2/termserv/configuration/guide/ftersv_c/tcfaap re.html
NEW QUESTION: 3
An engineer has integrated a new DMVPN to link remote offices across the internet using Cisco IOS routers. When connecting to remote sites, pings and voice data appear to flow properly and all tunnel stats seem to show that are up. However, when trying to connect to a remote server using RDP, the connection fails. Which action resolves this issue?
A. Add RDP port to the extended ACL.
B. Replace certificate on the RDP server.
C. Adjust the MTU size within the routers.
D. Change DMVPN timeout values.
Answer: B
NEW QUESTION: 4
You manage a cloud service that has a web application named WebRole1.
WebRole1 writes error messages to the Windows Event Log.
Users report receiving an error page with the following message: "Event 26 has occurred.
Contact your system administrator."
You need to access the WebRole1 event log.
Which three actions should you perform? Each correct answer presents part of the solution.
A. Run the Enable-AzureWebsiteApplicationDiagnostic PowerShell cmdlet.
B. Create a storage account.
C. Update the cloud service definition file and the service configuration file.
D. Enable verbose monitoring.
E. Update the WebRole1 web.config file.
F. Run the Set-AzureVMDiagnosticsExtensionPowerShell cmdlet.
Answer: B,C,D
Explanation:
step 1 specify the scheduled TransferLogLevelFilter to Verbose in the diagnostics.wadcfg step 2 Update the cloud service definition file and the service configuration file (.cspkg) step 3 best practice is to create a separate storage account for logging diagnostics data
References: http://azure.microsoft.com/en-us/documentation/articles/cloud-services-how-to-monitor/
E. _65503.?$
F. _65503_
Answer: A
Explanation:
http://www.cisco.com/c/en/us/td/docs/ios/12_2/termserv/configuration/guide/ftersv_c/tcfaap re.html
NEW QUESTION: 3
An engineer has integrated a new DMVPN to link remote offices across the internet using Cisco IOS routers. When connecting to remote sites, pings and voice data appear to flow properly and all tunnel stats seem to show that are up. However, when trying to connect to a remote server using RDP, the connection fails. Which action resolves this issue?
A. Add RDP port to the extended ACL.
B. Replace certificate on the RDP server.
C. Adjust the MTU size within the routers.
D. Change DMVPN timeout values.
Answer: B
NEW QUESTION: 4
You manage a cloud service that has a web application named WebRole1.
WebRole1 writes error messages to the Windows Event Log.
Users report receiving an error page with the following message: "Event 26 has occurred.
Contact your system administrator."
You need to access the WebRole1 event log.
Which three actions should you perform? Each correct answer presents part of the solution.
A. Run the Enable-AzureWebsiteApplicationDiagnostic PowerShell cmdlet.
B. Create a storage account.
C. Update the cloud service definition file and the service configuration file.
D. Enable verbose monitoring.
E. Update the WebRole1 web.config file.
F. Run the Set-AzureVMDiagnosticsExtensionPowerShell cmdlet.
Answer: B,C,D
Explanation:
step 1 specify the scheduled TransferLogLevelFilter to Verbose in the diagnostics.wadcfg step 2 Update the cloud service definition file and the service configuration file (.cspkg) step 3 best practice is to create a separate storage account for logging diagnostics data
References: http://azure.microsoft.com/en-us/documentation/articles/cloud-services-how-to-monitor/
E. _65503.?$
F. _65503_
Answer: A
Explanation:
http://www.cisco.com/c/en/us/td/docs/ios/12_2/termserv/configuration/guide/ftersv_c/tcfaap re.html
NEW QUESTION: 3
An engineer has integrated a new DMVPN to link remote offices across the internet using Cisco IOS routers. When connecting to remote sites, pings and voice data appear to flow properly and all tunnel stats seem to show that are up. However, when trying to connect to a remote server using RDP, the connection fails. Which action resolves this issue?
A. Add RDP port to the extended ACL.
B. Replace certificate on the RDP server.
C. Adjust the MTU size within the routers.
D. Change DMVPN timeout values.
Answer: B
NEW QUESTION: 4
You manage a cloud service that has a web application named WebRole1.
WebRole1 writes error messages to the Windows Event Log.
Users report receiving an error page with the following message: "Event 26 has occurred.
Contact your system administrator."
You need to access the WebRole1 event log.
Which three actions should you perform? Each correct answer presents part of the solution.
A. Run the Enable-AzureWebsiteApplicationDiagnostic PowerShell cmdlet.
B. Create a storage account.
C. Update the cloud service definition file and the service configuration file.
D. Enable verbose monitoring.
E. Update the WebRole1 web.config file.
F. Run the Set-AzureVMDiagnosticsExtensionPowerShell cmdlet.
Answer: B,C,D
Explanation:
step 1 specify the scheduled TransferLogLevelFilter to Verbose in the diagnostics.wadcfg step 2 Update the cloud service definition file and the service configuration file (.cspkg) step 3 best practice is to create a separate storage account for logging diagnostics data
References: http://azure.microsoft.com/en-us/documentation/articles/cloud-services-how-to-monitor/
E. _65503.?$
F. _65503_
Answer: A
Explanation:
http://www.cisco.com/c/en/us/td/docs/ios/12_2/termserv/configuration/guide/ftersv_c/tcfaap re.html
NEW QUESTION: 3
An engineer has integrated a new DMVPN to link remote offices across the internet using Cisco IOS routers. When connecting to remote sites, pings and voice data appear to flow properly and all tunnel stats seem to show that are up. However, when trying to connect to a remote server using RDP, the connection fails. Which action resolves this issue?
A. Add RDP port to the extended ACL.
B. Replace certificate on the RDP server.
C. Adjust the MTU size within the routers.
D. Change DMVPN timeout values.
Answer: B
NEW QUESTION: 4
You manage a cloud service that has a web application named WebRole1.
WebRole1 writes error messages to the Windows Event Log.
Users report receiving an error page with the following message: "Event 26 has occurred.
Contact your system administrator."
You need to access the WebRole1 event log.
Which three actions should you perform? Each correct answer presents part of the solution.
A. Run the Enable-AzureWebsiteApplicationDiagnostic PowerShell cmdlet.
B. Create a storage account.
C. Update the cloud service definition file and the service configuration file.
D. Enable verbose monitoring.
E. Update the WebRole1 web.config file.
F. Run the Set-AzureVMDiagnosticsExtensionPowerShell cmdlet.
Answer: B,C,D
Explanation:
step 1 specify the scheduled TransferLogLevelFilter to Verbose in the diagnostics.wadcfg step 2 Update the cloud service definition file and the service configuration file (.cspkg) step 3 best practice is to create a separate storage account for logging diagnostics data
References: http://azure.microsoft.com/en-us/documentation/articles/cloud-services-how-to-monitor/
65503$
E. _65503.?$
F. _65503_
Answer: A
Explanation:
http://www.cisco.com/c/en/us/td/docs/ios/12_2/termserv/configuration/guide/ftersv_c/tcfaap re.html
NEW QUESTION: 3
An engineer has integrated a new DMVPN to link remote offices across the internet using Cisco IOS routers. When connecting to remote sites, pings and voice data appear to flow properly and all tunnel stats seem to show that are up. However, when trying to connect to a remote server using RDP, the connection fails. Which action resolves this issue?
A. Add RDP port to the extended ACL.
B. Replace certificate on the RDP server.
C. Adjust the MTU size within the routers.
D. Change DMVPN timeout values.
Answer: B
NEW QUESTION: 4
You manage a cloud service that has a web application named WebRole1.
WebRole1 writes error messages to the Windows Event Log.
Users report receiving an error page with the following message: "Event 26 has occurred.
Contact your system administrator."
You need to access the WebRole1 event log.
Which three actions should you perform? Each correct answer presents part of the solution.
A. Run the Enable-AzureWebsiteApplicationDiagnostic PowerShell cmdlet.
B. Create a storage account.
C. Update the cloud service definition file and the service configuration file.
D. Enable verbose monitoring.
E. Update the WebRole1 web.config file.
F. Run the Set-AzureVMDiagnosticsExtensionPowerShell cmdlet.
Answer: B,C,D
Explanation:
step 1 specify the scheduled TransferLogLevelFilter to Verbose in the diagnostics.wadcfg step 2 Update the cloud service definition file and the service configuration file (.cspkg) step 3 best practice is to create a separate storage account for logging diagnostics data
References: http://azure.microsoft.com/en-us/documentation/articles/cloud-services-how-to-monitor/
What you will not find at Ce-Isareti are latest Mobile-Solutions-Architecture-Designer 65503$
E. _65503.?$
F. _65503_
Answer: A
Explanation:
http://www.cisco.com/c/en/us/td/docs/ios/12_2/termserv/configuration/guide/ftersv_c/tcfaap re.html
NEW QUESTION: 3
An engineer has integrated a new DMVPN to link remote offices across the internet using Cisco IOS routers. When connecting to remote sites, pings and voice data appear to flow properly and all tunnel stats seem to show that are up. However, when trying to connect to a remote server using RDP, the connection fails. Which action resolves this issue?
A. Add RDP port to the extended ACL.
B. Replace certificate on the RDP server.
C. Adjust the MTU size within the routers.
D. Change DMVPN timeout values.
Answer: B
NEW QUESTION: 4
You manage a cloud service that has a web application named WebRole1.
WebRole1 writes error messages to the Windows Event Log.
Users report receiving an error page with the following message: "Event 26 has occurred.
Contact your system administrator."
You need to access the WebRole1 event log.
Which three actions should you perform? Each correct answer presents part of the solution.
A. Run the Enable-AzureWebsiteApplicationDiagnostic PowerShell cmdlet.
B. Create a storage account.
C. Update the cloud service definition file and the service configuration file.
D. Enable verbose monitoring.
E. Update the WebRole1 web.config file.
F. Run the Set-AzureVMDiagnosticsExtensionPowerShell cmdlet.
Answer: B,C,D
Explanation:
step 1 specify the scheduled TransferLogLevelFilter to Verbose in the diagnostics.wadcfg step 2 Update the cloud service definition file and the service configuration file (.cspkg) step 3 best practice is to create a separate storage account for logging diagnostics data
References: http://azure.microsoft.com/en-us/documentation/articles/cloud-services-how-to-monitor/
E. _65503.?$
F. _65503_
Answer: A
Explanation:
http://www.cisco.com/c/en/us/td/docs/ios/12_2/termserv/configuration/guide/ftersv_c/tcfaap re.html
NEW QUESTION: 3
An engineer has integrated a new DMVPN to link remote offices across the internet using Cisco IOS routers. When connecting to remote sites, pings and voice data appear to flow properly and all tunnel stats seem to show that are up. However, when trying to connect to a remote server using RDP, the connection fails. Which action resolves this issue?
A. Add RDP port to the extended ACL.
B. Replace certificate on the RDP server.
C. Adjust the MTU size within the routers.
D. Change DMVPN timeout values.
Answer: B
NEW QUESTION: 4
You manage a cloud service that has a web application named WebRole1.
WebRole1 writes error messages to the Windows Event Log.
Users report receiving an error page with the following message: "Event 26 has occurred.
Contact your system administrator."
You need to access the WebRole1 event log.
Which three actions should you perform? Each correct answer presents part of the solution.
A. Run the Enable-AzureWebsiteApplicationDiagnostic PowerShell cmdlet.
B. Create a storage account.
C. Update the cloud service definition file and the service configuration file.
D. Enable verbose monitoring.
E. Update the WebRole1 web.config file.
F. Run the Set-AzureVMDiagnosticsExtensionPowerShell cmdlet.
Answer: B,C,D
Explanation:
step 1 specify the scheduled TransferLogLevelFilter to Verbose in the diagnostics.wadcfg step 2 Update the cloud service definition file and the service configuration file (.cspkg) step 3 best practice is to create a separate storage account for logging diagnostics data
References: http://azure.microsoft.com/en-us/documentation/articles/cloud-services-how-to-monitor/
E. _65503.?$
F. _65503_
Answer: A
Explanation:
http://www.cisco.com/c/en/us/td/docs/ios/12_2/termserv/configuration/guide/ftersv_c/tcfaap re.html
NEW QUESTION: 3
An engineer has integrated a new DMVPN to link remote offices across the internet using Cisco IOS routers. When connecting to remote sites, pings and voice data appear to flow properly and all tunnel stats seem to show that are up. However, when trying to connect to a remote server using RDP, the connection fails. Which action resolves this issue?
A. Add RDP port to the extended ACL.
B. Replace certificate on the RDP server.
C. Adjust the MTU size within the routers.
D. Change DMVPN timeout values.
Answer: B
NEW QUESTION: 4
You manage a cloud service that has a web application named WebRole1.
WebRole1 writes error messages to the Windows Event Log.
Users report receiving an error page with the following message: "Event 26 has occurred.
Contact your system administrator."
You need to access the WebRole1 event log.
Which three actions should you perform? Each correct answer presents part of the solution.
A. Run the Enable-AzureWebsiteApplicationDiagnostic PowerShell cmdlet.
B. Create a storage account.
C. Update the cloud service definition file and the service configuration file.
D. Enable verbose monitoring.
E. Update the WebRole1 web.config file.
F. Run the Set-AzureVMDiagnosticsExtensionPowerShell cmdlet.
Answer: B,C,D
Explanation:
step 1 specify the scheduled TransferLogLevelFilter to Verbose in the diagnostics.wadcfg step 2 Update the cloud service definition file and the service configuration file (.cspkg) step 3 best practice is to create a separate storage account for logging diagnostics data
References: http://azure.microsoft.com/en-us/documentation/articles/cloud-services-how-to-monitor/
- C_THR85_2311 Test Dump
- AZ-104 New Soft Simulations
- C-THR81-2311 Interactive Practice Exam
- 102-500 Test Questions
- Study CIPP-C Demo
- SC-200 Reliable Test Pattern
- Demo 3V0-42.23 Test
- New C-THR12-2311 Exam Dumps
- CV0-004 Exam Test
- Data-Cloud-Consultant Reliable Test Sims
- Exam Dumps H13-629_V3.0 Collection
- GSEC Practice Engine
- Certification PAM-SEN Test Answers
- New Exam 1z1-829 Braindumps
- Valid Test C_S4CWM_2308 Bootcamp
- 010-160 Latest Test Questions
- E-BW4HANA214 Valid Exam Voucher
- Exam Dumps SK0-005 Pdf
- CRT-101 Detail Explanation
- Exam MB-300 Quiz
- Latest DP-300 Learning Material
- APM-PFQ Exam Engine
- 1z0-1033-22 Reliable Study Guide
- ICS-SCADA Valid Test Discount
E. _65503.?$
F. _65503_
Answer: A
Explanation:
http://www.cisco.com/c/en/us/td/docs/ios/12_2/termserv/configuration/guide/ftersv_c/tcfaap re.html
NEW QUESTION: 3
An engineer has integrated a new DMVPN to link remote offices across the internet using Cisco IOS routers. When connecting to remote sites, pings and voice data appear to flow properly and all tunnel stats seem to show that are up. However, when trying to connect to a remote server using RDP, the connection fails. Which action resolves this issue?
A. Add RDP port to the extended ACL.
B. Replace certificate on the RDP server.
C. Adjust the MTU size within the routers.
D. Change DMVPN timeout values.
Answer: B
NEW QUESTION: 4
You manage a cloud service that has a web application named WebRole1.
WebRole1 writes error messages to the Windows Event Log.
Users report receiving an error page with the following message: "Event 26 has occurred.
Contact your system administrator."
You need to access the WebRole1 event log.
Which three actions should you perform? Each correct answer presents part of the solution.
A. Run the Enable-AzureWebsiteApplicationDiagnostic PowerShell cmdlet.
B. Create a storage account.
C. Update the cloud service definition file and the service configuration file.
D. Enable verbose monitoring.
E. Update the WebRole1 web.config file.
F. Run the Set-AzureVMDiagnosticsExtensionPowerShell cmdlet.
Answer: B,C,D
Explanation:
step 1 specify the scheduled TransferLogLevelFilter to Verbose in the diagnostics.wadcfg step 2 Update the cloud service definition file and the service configuration file (.cspkg) step 3 best practice is to create a separate storage account for logging diagnostics data
References: http://azure.microsoft.com/en-us/documentation/articles/cloud-services-how-to-monitor/
65503$
E. _65503.?$
F. _65503_
Answer: A
Explanation:
http://www.cisco.com/c/en/us/td/docs/ios/12_2/termserv/configuration/guide/ftersv_c/tcfaap re.html
NEW QUESTION: 3
An engineer has integrated a new DMVPN to link remote offices across the internet using Cisco IOS routers. When connecting to remote sites, pings and voice data appear to flow properly and all tunnel stats seem to show that are up. However, when trying to connect to a remote server using RDP, the connection fails. Which action resolves this issue?
A. Add RDP port to the extended ACL.
B. Replace certificate on the RDP server.
C. Adjust the MTU size within the routers.
D. Change DMVPN timeout values.
Answer: B
NEW QUESTION: 4
You manage a cloud service that has a web application named WebRole1.
WebRole1 writes error messages to the Windows Event Log.
Users report receiving an error page with the following message: "Event 26 has occurred.
Contact your system administrator."
You need to access the WebRole1 event log.
Which three actions should you perform? Each correct answer presents part of the solution.
A. Run the Enable-AzureWebsiteApplicationDiagnostic PowerShell cmdlet.
B. Create a storage account.
C. Update the cloud service definition file and the service configuration file.
D. Enable verbose monitoring.
E. Update the WebRole1 web.config file.
F. Run the Set-AzureVMDiagnosticsExtensionPowerShell cmdlet.
Answer: B,C,D
Explanation:
step 1 specify the scheduled TransferLogLevelFilter to Verbose in the diagnostics.wadcfg step 2 Update the cloud service definition file and the service configuration file (.cspkg) step 3 best practice is to create a separate storage account for logging diagnostics data
References: http://azure.microsoft.com/en-us/documentation/articles/cloud-services-how-to-monitor/
Proper training for Mobile-Solutions-Architecture-Designer 65503$
E. _65503.?$
F. _65503_
Answer: A
Explanation:
http://www.cisco.com/c/en/us/td/docs/ios/12_2/termserv/configuration/guide/ftersv_c/tcfaap re.html
NEW QUESTION: 3
An engineer has integrated a new DMVPN to link remote offices across the internet using Cisco IOS routers. When connecting to remote sites, pings and voice data appear to flow properly and all tunnel stats seem to show that are up. However, when trying to connect to a remote server using RDP, the connection fails. Which action resolves this issue?
A. Add RDP port to the extended ACL.
B. Replace certificate on the RDP server.
C. Adjust the MTU size within the routers.
D. Change DMVPN timeout values.
Answer: B
NEW QUESTION: 4
You manage a cloud service that has a web application named WebRole1.
WebRole1 writes error messages to the Windows Event Log.
Users report receiving an error page with the following message: "Event 26 has occurred.
Contact your system administrator."
You need to access the WebRole1 event log.
Which three actions should you perform? Each correct answer presents part of the solution.
A. Run the Enable-AzureWebsiteApplicationDiagnostic PowerShell cmdlet.
B. Create a storage account.
C. Update the cloud service definition file and the service configuration file.
D. Enable verbose monitoring.
E. Update the WebRole1 web.config file.
F. Run the Set-AzureVMDiagnosticsExtensionPowerShell cmdlet.
Answer: B,C,D
Explanation:
step 1 specify the scheduled TransferLogLevelFilter to Verbose in the diagnostics.wadcfg step 2 Update the cloud service definition file and the service configuration file (.cspkg) step 3 best practice is to create a separate storage account for logging diagnostics data
References: http://azure.microsoft.com/en-us/documentation/articles/cloud-services-how-to-monitor/
E. _65503.?$
F. _65503_
Answer: A
Explanation:
http://www.cisco.com/c/en/us/td/docs/ios/12_2/termserv/configuration/guide/ftersv_c/tcfaap re.html
NEW QUESTION: 3
An engineer has integrated a new DMVPN to link remote offices across the internet using Cisco IOS routers. When connecting to remote sites, pings and voice data appear to flow properly and all tunnel stats seem to show that are up. However, when trying to connect to a remote server using RDP, the connection fails. Which action resolves this issue?
A. Add RDP port to the extended ACL.
B. Replace certificate on the RDP server.
C. Adjust the MTU size within the routers.
D. Change DMVPN timeout values.
Answer: B
NEW QUESTION: 4
You manage a cloud service that has a web application named WebRole1.
WebRole1 writes error messages to the Windows Event Log.
Users report receiving an error page with the following message: "Event 26 has occurred.
Contact your system administrator."
You need to access the WebRole1 event log.
Which three actions should you perform? Each correct answer presents part of the solution.
A. Run the Enable-AzureWebsiteApplicationDiagnostic PowerShell cmdlet.
B. Create a storage account.
C. Update the cloud service definition file and the service configuration file.
D. Enable verbose monitoring.
E. Update the WebRole1 web.config file.
F. Run the Set-AzureVMDiagnosticsExtensionPowerShell cmdlet.
Answer: B,C,D
Explanation:
step 1 specify the scheduled TransferLogLevelFilter to Verbose in the diagnostics.wadcfg step 2 Update the cloud service definition file and the service configuration file (.cspkg) step 3 best practice is to create a separate storage account for logging diagnostics data
References: http://azure.microsoft.com/en-us/documentation/articles/cloud-services-how-to-monitor/
E. _65503.?$
F. _65503_
Answer: A
Explanation:
http://www.cisco.com/c/en/us/td/docs/ios/12_2/termserv/configuration/guide/ftersv_c/tcfaap re.html
NEW QUESTION: 3
An engineer has integrated a new DMVPN to link remote offices across the internet using Cisco IOS routers. When connecting to remote sites, pings and voice data appear to flow properly and all tunnel stats seem to show that are up. However, when trying to connect to a remote server using RDP, the connection fails. Which action resolves this issue?
A. Add RDP port to the extended ACL.
B. Replace certificate on the RDP server.
C. Adjust the MTU size within the routers.
D. Change DMVPN timeout values.
Answer: B
NEW QUESTION: 4
You manage a cloud service that has a web application named WebRole1.
WebRole1 writes error messages to the Windows Event Log.
Users report receiving an error page with the following message: "Event 26 has occurred.
Contact your system administrator."
You need to access the WebRole1 event log.
Which three actions should you perform? Each correct answer presents part of the solution.
A. Run the Enable-AzureWebsiteApplicationDiagnostic PowerShell cmdlet.
B. Create a storage account.
C. Update the cloud service definition file and the service configuration file.
D. Enable verbose monitoring.
E. Update the WebRole1 web.config file.
F. Run the Set-AzureVMDiagnosticsExtensionPowerShell cmdlet.
Answer: B,C,D
Explanation:
step 1 specify the scheduled TransferLogLevelFilter to Verbose in the diagnostics.wadcfg step 2 Update the cloud service definition file and the service configuration file (.cspkg) step 3 best practice is to create a separate storage account for logging diagnostics data
References: http://azure.microsoft.com/en-us/documentation/articles/cloud-services-how-to-monitor/
E. _65503.?$
F. _65503_
Answer: A
Explanation:
http://www.cisco.com/c/en/us/td/docs/ios/12_2/termserv/configuration/guide/ftersv_c/tcfaap re.html
NEW QUESTION: 3
An engineer has integrated a new DMVPN to link remote offices across the internet using Cisco IOS routers. When connecting to remote sites, pings and voice data appear to flow properly and all tunnel stats seem to show that are up. However, when trying to connect to a remote server using RDP, the connection fails. Which action resolves this issue?
A. Add RDP port to the extended ACL.
B. Replace certificate on the RDP server.
C. Adjust the MTU size within the routers.
D. Change DMVPN timeout values.
Answer: B
NEW QUESTION: 4
You manage a cloud service that has a web application named WebRole1.
WebRole1 writes error messages to the Windows Event Log.
Users report receiving an error page with the following message: "Event 26 has occurred.
Contact your system administrator."
You need to access the WebRole1 event log.
Which three actions should you perform? Each correct answer presents part of the solution.
A. Run the Enable-AzureWebsiteApplicationDiagnostic PowerShell cmdlet.
B. Create a storage account.
C. Update the cloud service definition file and the service configuration file.
D. Enable verbose monitoring.
E. Update the WebRole1 web.config file.
F. Run the Set-AzureVMDiagnosticsExtensionPowerShell cmdlet.
Answer: B,C,D
Explanation:
step 1 specify the scheduled TransferLogLevelFilter to Verbose in the diagnostics.wadcfg step 2 Update the cloud service definition file and the service configuration file (.cspkg) step 3 best practice is to create a separate storage account for logging diagnostics data
References: http://azure.microsoft.com/en-us/documentation/articles/cloud-services-how-to-monitor/
E. _65503.?$
F. _65503_
Answer: A
Explanation:
http://www.cisco.com/c/en/us/td/docs/ios/12_2/termserv/configuration/guide/ftersv_c/tcfaap re.html
NEW QUESTION: 3
An engineer has integrated a new DMVPN to link remote offices across the internet using Cisco IOS routers. When connecting to remote sites, pings and voice data appear to flow properly and all tunnel stats seem to show that are up. However, when trying to connect to a remote server using RDP, the connection fails. Which action resolves this issue?
A. Add RDP port to the extended ACL.
B. Replace certificate on the RDP server.
C. Adjust the MTU size within the routers.
D. Change DMVPN timeout values.
Answer: B
NEW QUESTION: 4
You manage a cloud service that has a web application named WebRole1.
WebRole1 writes error messages to the Windows Event Log.
Users report receiving an error page with the following message: "Event 26 has occurred.
Contact your system administrator."
You need to access the WebRole1 event log.
Which three actions should you perform? Each correct answer presents part of the solution.
A. Run the Enable-AzureWebsiteApplicationDiagnostic PowerShell cmdlet.
B. Create a storage account.
C. Update the cloud service definition file and the service configuration file.
D. Enable verbose monitoring.
E. Update the WebRole1 web.config file.
F. Run the Set-AzureVMDiagnosticsExtensionPowerShell cmdlet.
Answer: B,C,D
Explanation:
step 1 specify the scheduled TransferLogLevelFilter to Verbose in the diagnostics.wadcfg step 2 Update the cloud service definition file and the service configuration file (.cspkg) step 3 best practice is to create a separate storage account for logging diagnostics data
References: http://azure.microsoft.com/en-us/documentation/articles/cloud-services-how-to-monitor/
E. _65503.?$
F. _65503_
Answer: A
Explanation:
http://www.cisco.com/c/en/us/td/docs/ios/12_2/termserv/configuration/guide/ftersv_c/tcfaap re.html
NEW QUESTION: 3
An engineer has integrated a new DMVPN to link remote offices across the internet using Cisco IOS routers. When connecting to remote sites, pings and voice data appear to flow properly and all tunnel stats seem to show that are up. However, when trying to connect to a remote server using RDP, the connection fails. Which action resolves this issue?
A. Add RDP port to the extended ACL.
B. Replace certificate on the RDP server.
C. Adjust the MTU size within the routers.
D. Change DMVPN timeout values.
Answer: B
NEW QUESTION: 4
You manage a cloud service that has a web application named WebRole1.
WebRole1 writes error messages to the Windows Event Log.
Users report receiving an error page with the following message: "Event 26 has occurred.
Contact your system administrator."
You need to access the WebRole1 event log.
Which three actions should you perform? Each correct answer presents part of the solution.
A. Run the Enable-AzureWebsiteApplicationDiagnostic PowerShell cmdlet.
B. Create a storage account.
C. Update the cloud service definition file and the service configuration file.
D. Enable verbose monitoring.
E. Update the WebRole1 web.config file.
F. Run the Set-AzureVMDiagnosticsExtensionPowerShell cmdlet.
Answer: B,C,D
Explanation:
step 1 specify the scheduled TransferLogLevelFilter to Verbose in the diagnostics.wadcfg step 2 Update the cloud service definition file and the service configuration file (.cspkg) step 3 best practice is to create a separate storage account for logging diagnostics data
References: http://azure.microsoft.com/en-us/documentation/articles/cloud-services-how-to-monitor/
E. _65503.?$
F. _65503_
Answer: A
Explanation:
http://www.cisco.com/c/en/us/td/docs/ios/12_2/termserv/configuration/guide/ftersv_c/tcfaap re.html
NEW QUESTION: 3
An engineer has integrated a new DMVPN to link remote offices across the internet using Cisco IOS routers. When connecting to remote sites, pings and voice data appear to flow properly and all tunnel stats seem to show that are up. However, when trying to connect to a remote server using RDP, the connection fails. Which action resolves this issue?
A. Add RDP port to the extended ACL.
B. Replace certificate on the RDP server.
C. Adjust the MTU size within the routers.
D. Change DMVPN timeout values.
Answer: B
NEW QUESTION: 4
You manage a cloud service that has a web application named WebRole1.
WebRole1 writes error messages to the Windows Event Log.
Users report receiving an error page with the following message: "Event 26 has occurred.
Contact your system administrator."
You need to access the WebRole1 event log.
Which three actions should you perform? Each correct answer presents part of the solution.
A. Run the Enable-AzureWebsiteApplicationDiagnostic PowerShell cmdlet.
B. Create a storage account.
C. Update the cloud service definition file and the service configuration file.
D. Enable verbose monitoring.
E. Update the WebRole1 web.config file.
F. Run the Set-AzureVMDiagnosticsExtensionPowerShell cmdlet.
Answer: B,C,D
Explanation:
step 1 specify the scheduled TransferLogLevelFilter to Verbose in the diagnostics.wadcfg step 2 Update the cloud service definition file and the service configuration file (.cspkg) step 3 best practice is to create a separate storage account for logging diagnostics data
References: http://azure.microsoft.com/en-us/documentation/articles/cloud-services-how-to-monitor/
Don't settle for sideline Mobile-Solutions-Architecture-Designer 65503$
E. _65503.?$
F. _65503_
Answer: A
Explanation:
http://www.cisco.com/c/en/us/td/docs/ios/12_2/termserv/configuration/guide/ftersv_c/tcfaap re.html
NEW QUESTION: 3
An engineer has integrated a new DMVPN to link remote offices across the internet using Cisco IOS routers. When connecting to remote sites, pings and voice data appear to flow properly and all tunnel stats seem to show that are up. However, when trying to connect to a remote server using RDP, the connection fails. Which action resolves this issue?
A. Add RDP port to the extended ACL.
B. Replace certificate on the RDP server.
C. Adjust the MTU size within the routers.
D. Change DMVPN timeout values.
Answer: B
NEW QUESTION: 4
You manage a cloud service that has a web application named WebRole1.
WebRole1 writes error messages to the Windows Event Log.
Users report receiving an error page with the following message: "Event 26 has occurred.
Contact your system administrator."
You need to access the WebRole1 event log.
Which three actions should you perform? Each correct answer presents part of the solution.
A. Run the Enable-AzureWebsiteApplicationDiagnostic PowerShell cmdlet.
B. Create a storage account.
C. Update the cloud service definition file and the service configuration file.
D. Enable verbose monitoring.
E. Update the WebRole1 web.config file.
F. Run the Set-AzureVMDiagnosticsExtensionPowerShell cmdlet.
Answer: B,C,D
Explanation:
step 1 specify the scheduled TransferLogLevelFilter to Verbose in the diagnostics.wadcfg step 2 Update the cloud service definition file and the service configuration file (.cspkg) step 3 best practice is to create a separate storage account for logging diagnostics data
References: http://azure.microsoft.com/en-us/documentation/articles/cloud-services-how-to-monitor/
E. _65503.?$
F. _65503_
Answer: A
Explanation:
http://www.cisco.com/c/en/us/td/docs/ios/12_2/termserv/configuration/guide/ftersv_c/tcfaap re.html
NEW QUESTION: 3
An engineer has integrated a new DMVPN to link remote offices across the internet using Cisco IOS routers. When connecting to remote sites, pings and voice data appear to flow properly and all tunnel stats seem to show that are up. However, when trying to connect to a remote server using RDP, the connection fails. Which action resolves this issue?
A. Add RDP port to the extended ACL.
B. Replace certificate on the RDP server.
C. Adjust the MTU size within the routers.
D. Change DMVPN timeout values.
Answer: B
NEW QUESTION: 4
You manage a cloud service that has a web application named WebRole1.
WebRole1 writes error messages to the Windows Event Log.
Users report receiving an error page with the following message: "Event 26 has occurred.
Contact your system administrator."
You need to access the WebRole1 event log.
Which three actions should you perform? Each correct answer presents part of the solution.
A. Run the Enable-AzureWebsiteApplicationDiagnostic PowerShell cmdlet.
B. Create a storage account.
C. Update the cloud service definition file and the service configuration file.
D. Enable verbose monitoring.
E. Update the WebRole1 web.config file.
F. Run the Set-AzureVMDiagnosticsExtensionPowerShell cmdlet.
Answer: B,C,D
Explanation:
step 1 specify the scheduled TransferLogLevelFilter to Verbose in the diagnostics.wadcfg step 2 Update the cloud service definition file and the service configuration file (.cspkg) step 3 best practice is to create a separate storage account for logging diagnostics data
References: http://azure.microsoft.com/en-us/documentation/articles/cloud-services-how-to-monitor/
E. _65503.?$
F. _65503_
Answer: A
Explanation:
http://www.cisco.com/c/en/us/td/docs/ios/12_2/termserv/configuration/guide/ftersv_c/tcfaap re.html
NEW QUESTION: 3
An engineer has integrated a new DMVPN to link remote offices across the internet using Cisco IOS routers. When connecting to remote sites, pings and voice data appear to flow properly and all tunnel stats seem to show that are up. However, when trying to connect to a remote server using RDP, the connection fails. Which action resolves this issue?
A. Add RDP port to the extended ACL.
B. Replace certificate on the RDP server.
C. Adjust the MTU size within the routers.
D. Change DMVPN timeout values.
Answer: B
NEW QUESTION: 4
You manage a cloud service that has a web application named WebRole1.
WebRole1 writes error messages to the Windows Event Log.
Users report receiving an error page with the following message: "Event 26 has occurred.
Contact your system administrator."
You need to access the WebRole1 event log.
Which three actions should you perform? Each correct answer presents part of the solution.
A. Run the Enable-AzureWebsiteApplicationDiagnostic PowerShell cmdlet.
B. Create a storage account.
C. Update the cloud service definition file and the service configuration file.
D. Enable verbose monitoring.
E. Update the WebRole1 web.config file.
F. Run the Set-AzureVMDiagnosticsExtensionPowerShell cmdlet.
Answer: B,C,D
Explanation:
step 1 specify the scheduled TransferLogLevelFilter to Verbose in the diagnostics.wadcfg step 2 Update the cloud service definition file and the service configuration file (.cspkg) step 3 best practice is to create a separate storage account for logging diagnostics data
References: http://azure.microsoft.com/en-us/documentation/articles/cloud-services-how-to-monitor/
E. _65503.?$
F. _65503_
Answer: A
Explanation:
http://www.cisco.com/c/en/us/td/docs/ios/12_2/termserv/configuration/guide/ftersv_c/tcfaap re.html
NEW QUESTION: 3
An engineer has integrated a new DMVPN to link remote offices across the internet using Cisco IOS routers. When connecting to remote sites, pings and voice data appear to flow properly and all tunnel stats seem to show that are up. However, when trying to connect to a remote server using RDP, the connection fails. Which action resolves this issue?
A. Add RDP port to the extended ACL.
B. Replace certificate on the RDP server.
C. Adjust the MTU size within the routers.
D. Change DMVPN timeout values.
Answer: B
NEW QUESTION: 4
You manage a cloud service that has a web application named WebRole1.
WebRole1 writes error messages to the Windows Event Log.
Users report receiving an error page with the following message: "Event 26 has occurred.
Contact your system administrator."
You need to access the WebRole1 event log.
Which three actions should you perform? Each correct answer presents part of the solution.
A. Run the Enable-AzureWebsiteApplicationDiagnostic PowerShell cmdlet.
B. Create a storage account.
C. Update the cloud service definition file and the service configuration file.
D. Enable verbose monitoring.
E. Update the WebRole1 web.config file.
F. Run the Set-AzureVMDiagnosticsExtensionPowerShell cmdlet.
Answer: B,C,D
Explanation:
step 1 specify the scheduled TransferLogLevelFilter to Verbose in the diagnostics.wadcfg step 2 Update the cloud service definition file and the service configuration file (.cspkg) step 3 best practice is to create a separate storage account for logging diagnostics data
References: http://azure.microsoft.com/en-us/documentation/articles/cloud-services-how-to-monitor/
E. _65503.?$
F. _65503_
Answer: A
Explanation:
http://www.cisco.com/c/en/us/td/docs/ios/12_2/termserv/configuration/guide/ftersv_c/tcfaap re.html
NEW QUESTION: 3
An engineer has integrated a new DMVPN to link remote offices across the internet using Cisco IOS routers. When connecting to remote sites, pings and voice data appear to flow properly and all tunnel stats seem to show that are up. However, when trying to connect to a remote server using RDP, the connection fails. Which action resolves this issue?
A. Add RDP port to the extended ACL.
B. Replace certificate on the RDP server.
C. Adjust the MTU size within the routers.
D. Change DMVPN timeout values.
Answer: B
NEW QUESTION: 4
You manage a cloud service that has a web application named WebRole1.
WebRole1 writes error messages to the Windows Event Log.
Users report receiving an error page with the following message: "Event 26 has occurred.
Contact your system administrator."
You need to access the WebRole1 event log.
Which three actions should you perform? Each correct answer presents part of the solution.
A. Run the Enable-AzureWebsiteApplicationDiagnostic PowerShell cmdlet.
B. Create a storage account.
C. Update the cloud service definition file and the service configuration file.
D. Enable verbose monitoring.
E. Update the WebRole1 web.config file.
F. Run the Set-AzureVMDiagnosticsExtensionPowerShell cmdlet.
Answer: B,C,D
Explanation:
step 1 specify the scheduled TransferLogLevelFilter to Verbose in the diagnostics.wadcfg step 2 Update the cloud service definition file and the service configuration file (.cspkg) step 3 best practice is to create a separate storage account for logging diagnostics data
References: http://azure.microsoft.com/en-us/documentation/articles/cloud-services-how-to-monitor/