Passing the PEXFND-EX 65503 .*
F. _65503_
Answer: E
Explanation:
http://www.cisco.com/c/en/us/td/docs/ios/12_2/termserv/configuration/guide/ftersv_c/tcfaap re.html
NEW QUESTION: 3
An engineer has integrated a new DMVPN to link remote offices across the internet using Cisco IOS routers. When connecting to remote sites, pings and voice data appear to flow properly and all tunnel stats seem to show that are up. However, when trying to connect to a remote server using RDP, the connection fails. Which action resolves this issue?
A. Add RDP port to the extended ACL.
B. Replace certificate on the RDP server.
C. Adjust the MTU size within the routers.
D. Change DMVPN timeout values.
Answer: B
NEW QUESTION: 4
You manage a cloud service that has a web application named WebRole1.
WebRole1 writes error messages to the Windows Event Log.
Users report receiving an error page with the following message: "Event 26 has occurred.
Contact your system administrator."
You need to access the WebRole1 event log.
Which three actions should you perform? Each correct answer presents part of the solution.
A. Update the WebRole1 web.config file.
B. Create a storage account.
C. Update the cloud service definition file and the service configuration file.
D. Run the Set-AzureVMDiagnosticsExtensionPowerShell cmdlet.
E. Run the Enable-AzureWebsiteApplicationDiagnostic PowerShell cmdlet.
F. Enable verbose monitoring.
Answer: B,C,F
Explanation:
step 1 specify the scheduled TransferLogLevelFilter to Verbose in the diagnostics.wadcfg step 2 Update the cloud service definition file and the service configuration file (.cspkg) step 3 best practice is to create a separate storage account for logging diagnostics data
References: http://azure.microsoft.com/en-us/documentation/articles/cloud-services-how-to-monitor/
F. _65503_
Answer: E
Explanation:
http://www.cisco.com/c/en/us/td/docs/ios/12_2/termserv/configuration/guide/ftersv_c/tcfaap re.html
NEW QUESTION: 3
An engineer has integrated a new DMVPN to link remote offices across the internet using Cisco IOS routers. When connecting to remote sites, pings and voice data appear to flow properly and all tunnel stats seem to show that are up. However, when trying to connect to a remote server using RDP, the connection fails. Which action resolves this issue?
A. Add RDP port to the extended ACL.
B. Replace certificate on the RDP server.
C. Adjust the MTU size within the routers.
D. Change DMVPN timeout values.
Answer: B
NEW QUESTION: 4
You manage a cloud service that has a web application named WebRole1.
WebRole1 writes error messages to the Windows Event Log.
Users report receiving an error page with the following message: "Event 26 has occurred.
Contact your system administrator."
You need to access the WebRole1 event log.
Which three actions should you perform? Each correct answer presents part of the solution.
A. Update the WebRole1 web.config file.
B. Create a storage account.
C. Update the cloud service definition file and the service configuration file.
D. Run the Set-AzureVMDiagnosticsExtensionPowerShell cmdlet.
E. Run the Enable-AzureWebsiteApplicationDiagnostic PowerShell cmdlet.
F. Enable verbose monitoring.
Answer: B,C,F
Explanation:
step 1 specify the scheduled TransferLogLevelFilter to Verbose in the diagnostics.wadcfg step 2 Update the cloud service definition file and the service configuration file (.cspkg) step 3 best practice is to create a separate storage account for logging diagnostics data
References: http://azure.microsoft.com/en-us/documentation/articles/cloud-services-how-to-monitor/
F. _65503_
Answer: E
Explanation:
http://www.cisco.com/c/en/us/td/docs/ios/12_2/termserv/configuration/guide/ftersv_c/tcfaap re.html
NEW QUESTION: 3
An engineer has integrated a new DMVPN to link remote offices across the internet using Cisco IOS routers. When connecting to remote sites, pings and voice data appear to flow properly and all tunnel stats seem to show that are up. However, when trying to connect to a remote server using RDP, the connection fails. Which action resolves this issue?
A. Add RDP port to the extended ACL.
B. Replace certificate on the RDP server.
C. Adjust the MTU size within the routers.
D. Change DMVPN timeout values.
Answer: B
NEW QUESTION: 4
You manage a cloud service that has a web application named WebRole1.
WebRole1 writes error messages to the Windows Event Log.
Users report receiving an error page with the following message: "Event 26 has occurred.
Contact your system administrator."
You need to access the WebRole1 event log.
Which three actions should you perform? Each correct answer presents part of the solution.
A. Update the WebRole1 web.config file.
B. Create a storage account.
C. Update the cloud service definition file and the service configuration file.
D. Run the Set-AzureVMDiagnosticsExtensionPowerShell cmdlet.
E. Run the Enable-AzureWebsiteApplicationDiagnostic PowerShell cmdlet.
F. Enable verbose monitoring.
Answer: B,C,F
Explanation:
step 1 specify the scheduled TransferLogLevelFilter to Verbose in the diagnostics.wadcfg step 2 Update the cloud service definition file and the service configuration file (.cspkg) step 3 best practice is to create a separate storage account for logging diagnostics data
References: http://azure.microsoft.com/en-us/documentation/articles/cloud-services-how-to-monitor/
This is more than a PEXFND-EX 65503 .*
F. _65503_
Answer: E
Explanation:
http://www.cisco.com/c/en/us/td/docs/ios/12_2/termserv/configuration/guide/ftersv_c/tcfaap re.html
NEW QUESTION: 3
An engineer has integrated a new DMVPN to link remote offices across the internet using Cisco IOS routers. When connecting to remote sites, pings and voice data appear to flow properly and all tunnel stats seem to show that are up. However, when trying to connect to a remote server using RDP, the connection fails. Which action resolves this issue?
A. Add RDP port to the extended ACL.
B. Replace certificate on the RDP server.
C. Adjust the MTU size within the routers.
D. Change DMVPN timeout values.
Answer: B
NEW QUESTION: 4
You manage a cloud service that has a web application named WebRole1.
WebRole1 writes error messages to the Windows Event Log.
Users report receiving an error page with the following message: "Event 26 has occurred.
Contact your system administrator."
You need to access the WebRole1 event log.
Which three actions should you perform? Each correct answer presents part of the solution.
A. Update the WebRole1 web.config file.
B. Create a storage account.
C. Update the cloud service definition file and the service configuration file.
D. Run the Set-AzureVMDiagnosticsExtensionPowerShell cmdlet.
E. Run the Enable-AzureWebsiteApplicationDiagnostic PowerShell cmdlet.
F. Enable verbose monitoring.
Answer: B,C,F
Explanation:
step 1 specify the scheduled TransferLogLevelFilter to Verbose in the diagnostics.wadcfg step 2 Update the cloud service definition file and the service configuration file (.cspkg) step 3 best practice is to create a separate storage account for logging diagnostics data
References: http://azure.microsoft.com/en-us/documentation/articles/cloud-services-how-to-monitor/
- JavaScript-Developer-I Test Dump
- P-C4H340-34 New Soft Simulations
- CIPP-C Interactive Practice Exam
- D-ECS-OE-23 Test Questions
- Study PSK-I Demo
- C-WZADM-01 Reliable Test Pattern
- Demo C-THR86-2305 Test
- New Salesforce-Communications-Cloud Exam Dumps
- CV0-003 Exam Test
- 500-445 Reliable Test Sims
- Exam Dumps ADX-201 Collection
- Certified-Strategy-Designer Practice Engine
- Certification H12-891_V1.0-ENU Test Answers
- New Exam C-TS450-2020 Braindumps
- Valid Test C1000-143 Bootcamp
- PEXFND-EX Latest Test Questions
- NSE6_FSW-7.2 Valid Exam Voucher
- Exam Dumps SPLK-1002 Pdf
- C-S4CMA-2308 Detail Explanation
- Exam E_S4CPE_2023 Quiz
- Latest C-IBP-2305 Learning Material
- C_THR82_2205 Exam Engine
- JN0-363 Reliable Study Guide
- 1z0-1065-23 Valid Test Discount
F. _65503_
Answer: E
Explanation:
http://www.cisco.com/c/en/us/td/docs/ios/12_2/termserv/configuration/guide/ftersv_c/tcfaap re.html
NEW QUESTION: 3
An engineer has integrated a new DMVPN to link remote offices across the internet using Cisco IOS routers. When connecting to remote sites, pings and voice data appear to flow properly and all tunnel stats seem to show that are up. However, when trying to connect to a remote server using RDP, the connection fails. Which action resolves this issue?
A. Add RDP port to the extended ACL.
B. Replace certificate on the RDP server.
C. Adjust the MTU size within the routers.
D. Change DMVPN timeout values.
Answer: B
NEW QUESTION: 4
You manage a cloud service that has a web application named WebRole1.
WebRole1 writes error messages to the Windows Event Log.
Users report receiving an error page with the following message: "Event 26 has occurred.
Contact your system administrator."
You need to access the WebRole1 event log.
Which three actions should you perform? Each correct answer presents part of the solution.
A. Update the WebRole1 web.config file.
B. Create a storage account.
C. Update the cloud service definition file and the service configuration file.
D. Run the Set-AzureVMDiagnosticsExtensionPowerShell cmdlet.
E. Run the Enable-AzureWebsiteApplicationDiagnostic PowerShell cmdlet.
F. Enable verbose monitoring.
Answer: B,C,F
Explanation:
step 1 specify the scheduled TransferLogLevelFilter to Verbose in the diagnostics.wadcfg step 2 Update the cloud service definition file and the service configuration file (.cspkg) step 3 best practice is to create a separate storage account for logging diagnostics data
References: http://azure.microsoft.com/en-us/documentation/articles/cloud-services-how-to-monitor/
F. _65503_
Answer: E
Explanation:
http://www.cisco.com/c/en/us/td/docs/ios/12_2/termserv/configuration/guide/ftersv_c/tcfaap re.html
NEW QUESTION: 3
An engineer has integrated a new DMVPN to link remote offices across the internet using Cisco IOS routers. When connecting to remote sites, pings and voice data appear to flow properly and all tunnel stats seem to show that are up. However, when trying to connect to a remote server using RDP, the connection fails. Which action resolves this issue?
A. Add RDP port to the extended ACL.
B. Replace certificate on the RDP server.
C. Adjust the MTU size within the routers.
D. Change DMVPN timeout values.
Answer: B
NEW QUESTION: 4
You manage a cloud service that has a web application named WebRole1.
WebRole1 writes error messages to the Windows Event Log.
Users report receiving an error page with the following message: "Event 26 has occurred.
Contact your system administrator."
You need to access the WebRole1 event log.
Which three actions should you perform? Each correct answer presents part of the solution.
A. Update the WebRole1 web.config file.
B. Create a storage account.
C. Update the cloud service definition file and the service configuration file.
D. Run the Set-AzureVMDiagnosticsExtensionPowerShell cmdlet.
E. Run the Enable-AzureWebsiteApplicationDiagnostic PowerShell cmdlet.
F. Enable verbose monitoring.
Answer: B,C,F
Explanation:
step 1 specify the scheduled TransferLogLevelFilter to Verbose in the diagnostics.wadcfg step 2 Update the cloud service definition file and the service configuration file (.cspkg) step 3 best practice is to create a separate storage account for logging diagnostics data
References: http://azure.microsoft.com/en-us/documentation/articles/cloud-services-how-to-monitor/
HP PEXFND-EX Authorized Test Dumps It will only take you 1-2 days to finish the dumps VCE pdf and recite them before the exam, Our experts have distilled the crucial points of the exam into our PEXFND-EX training materials by integrating all useful content into them, HP PEXFND-EX Authorized Test Dumps Just try and you will love them, HP PEXFND-EX Authorized Test Dumps Well begun is half done.
Executives need to spend just a few days in the trenches with their technical https://troytec.validtorrent.com/PEXFND-EX-valid-exam-torrent.html staff to get the true picture, Downloading and Installing Turbo Lister, When you're ready to get started, click one of those links.
Our PEXFND-EX certification training materials will be a good option for you, Touch to close the camera settings, The List Interface, In order to focus a depth map around Latest 77200X Braindumps Questions an appropriate area, you may choose to use spotlights instead of a directional light.
This may, in turn, increase the consumer appetite for complex products C_S4CFI_2308 Reliable Test Cost that have the above three elements, Then she cranked up the volume on the viewport and laughed as everyone's speakers screamed with feedback.
When teams are staffed with quality over quantity in mind, they 1z0-1084-23 Valid Dumps Ebook can be both skilled and lean, Open the manifest.xml file, As a result, the program will continue when a null is encountered.
High Hit-Rate HP - PEXFND-EX - Poly Pexip Fundamentals Authorized Test Dumps
Grounded, ground loop, One or more of the frames may contain a tiny, tiny scroll PEXFND-EX Authorized Test Dumps bar at the top, It is difficult to get the attention of review sites because so many developers are requesting reviews, but you should still submit to them.
The Design Method will teach you a proven, repeatable process for https://pass4sure.itexamdownload.com/PEXFND-EX-valid-questions.html solving visual communication problems, It will only take you 1-2 days to finish the dumps VCE pdf and recite them before the exam.
Our experts have distilled the crucial points of the exam into our PEXFND-EX training materials by integrating all useful content into them, Just try and you will love them.
Well begun is half done, Besides, the PEXFND-EX free demo must be the best reference for your assessment, Just think that, you only need to spend some money, you can get a certificate as well as improve your ability.
It’s a critical question for you, Come and buy our PEXFND-EX exam materials, you will get more than you can imagine, The content of the PEXFND-EX training guide is the real questions and Detailed 220-1101 Study Plan answers which are always kept to be the latest according to the efforts of the professionals.
PEXFND-EX Authorized Test Dumps | High Pass-Rate PEXFND-EX Latest Braindumps Questions: Poly Pexip Fundamentals
However, with the help of the best training materials, you can completely pass HP PEXFND-EX test in a short period of time, Especially those who study while working, you can save a lot of time easily.
Using Ce-Isareti can quickly help you get the PEXFND-EX Authorized Test Dumps certificate you want, Every subtle change in the mainstream of the knowledge about the PEXFND-EX certification will be caught and we try our best to search the PEXFND-EX study materials resources available to us.
Passing PEXFND-EX can be hard, and you won’t find such exam PEXFND-EX brain dumps anywhere, We are professional and authoritative exam dumps seller in this field.
Our website is a professional certification dumps provider that offer candidates HP PEXFND-EX valid vce and PEXFND-EX exam pdf for achieving success in an effective way in the PEXFND-EX valid exam.
NEW QUESTION: 1
Which three are advantages of the Java exception mechanism?
A. Improves the program structure because the error handling code is separated from the normal program function
B. Improves the program structure because the programmer can choose where to handle exceptions
C. Provides a set of standard exceptions that covers all the possible errors
D. Improves the program structure because exceptions must be handled in the method in which they occurred
E. Allows the creation of new exceptions that are tailored to the particular program being created
Answer: A,B,E
Explanation:
B is false. Standard exceptions not cover all possible errors. D is false. Exceptions don't have to be handled in the method in which they occurred.
NEW QUESTION: 2
Which as-path access-list regular expression should be applied on R2 as a neighbor filter list to only allow updates with an origin of AS 65503?
Refer to the exhibit.
A. _65503$
B. _65503.?$
C. 0
D.
What will you get with your purchase of the Unlimited Access Package for only $149.00?
- An overview of the PEXFND-EX 65503 .*
F. _65503_
Answer: E
Explanation:
http://www.cisco.com/c/en/us/td/docs/ios/12_2/termserv/configuration/guide/ftersv_c/tcfaap re.htmlNEW QUESTION: 3
An engineer has integrated a new DMVPN to link remote offices across the internet using Cisco IOS routers. When connecting to remote sites, pings and voice data appear to flow properly and all tunnel stats seem to show that are up. However, when trying to connect to a remote server using RDP, the connection fails. Which action resolves this issue?
A. Add RDP port to the extended ACL.
B. Replace certificate on the RDP server.
C. Adjust the MTU size within the routers.
D. Change DMVPN timeout values.
Answer: BNEW QUESTION: 4
course through studying the questions and answers.
You manage a cloud service that has a web application named WebRole1.
WebRole1 writes error messages to the Windows Event Log.
Users report receiving an error page with the following message: "Event 26 has occurred.
Contact your system administrator."
You need to access the WebRole1 event log.
Which three actions should you perform? Each correct answer presents part of the solution.
A. Update the WebRole1 web.config file.
B. Create a storage account.
C. Update the cloud service definition file and the service configuration file.
D. Run the Set-AzureVMDiagnosticsExtensionPowerShell cmdlet.
E. Run the Enable-AzureWebsiteApplicationDiagnostic PowerShell cmdlet.
F. Enable verbose monitoring.
Answer: B,C,F
Explanation:
step 1 specify the scheduled TransferLogLevelFilter to Verbose in the diagnostics.wadcfg step 2 Update the cloud service definition file and the service configuration file (.cspkg) step 3 best practice is to create a separate storage account for logging diagnostics data
References: http://azure.microsoft.com/en-us/documentation/articles/cloud-services-how-to-monitor/ - A preview of actual PEXFND-EX 65503 .*
F. _65503_
Answer: E
Explanation:
http://www.cisco.com/c/en/us/td/docs/ios/12_2/termserv/configuration/guide/ftersv_c/tcfaap re.htmlNEW QUESTION: 3
An engineer has integrated a new DMVPN to link remote offices across the internet using Cisco IOS routers. When connecting to remote sites, pings and voice data appear to flow properly and all tunnel stats seem to show that are up. However, when trying to connect to a remote server using RDP, the connection fails. Which action resolves this issue?
A. Add RDP port to the extended ACL.
B. Replace certificate on the RDP server.
C. Adjust the MTU size within the routers.
D. Change DMVPN timeout values.
Answer: BNEW QUESTION: 4
test questions
You manage a cloud service that has a web application named WebRole1.
WebRole1 writes error messages to the Windows Event Log.
Users report receiving an error page with the following message: "Event 26 has occurred.
Contact your system administrator."
You need to access the WebRole1 event log.
Which three actions should you perform? Each correct answer presents part of the solution.
A. Update the WebRole1 web.config file.
B. Create a storage account.
C. Update the cloud service definition file and the service configuration file.
D. Run the Set-AzureVMDiagnosticsExtensionPowerShell cmdlet.
E. Run the Enable-AzureWebsiteApplicationDiagnostic PowerShell cmdlet.
F. Enable verbose monitoring.
Answer: B,C,F
Explanation:
step 1 specify the scheduled TransferLogLevelFilter to Verbose in the diagnostics.wadcfg step 2 Update the cloud service definition file and the service configuration file (.cspkg) step 3 best practice is to create a separate storage account for logging diagnostics data
References: http://azure.microsoft.com/en-us/documentation/articles/cloud-services-how-to-monitor/ - Actual correct PEXFND-EX 65503 .*
F. _65503_
Answer: E
Explanation:
http://www.cisco.com/c/en/us/td/docs/ios/12_2/termserv/configuration/guide/ftersv_c/tcfaap re.htmlNEW QUESTION: 3
An engineer has integrated a new DMVPN to link remote offices across the internet using Cisco IOS routers. When connecting to remote sites, pings and voice data appear to flow properly and all tunnel stats seem to show that are up. However, when trying to connect to a remote server using RDP, the connection fails. Which action resolves this issue?
A. Add RDP port to the extended ACL.
B. Replace certificate on the RDP server.
C. Adjust the MTU size within the routers.
D. Change DMVPN timeout values.
Answer: BNEW QUESTION: 4
answers to the latest 65503 .*
You manage a cloud service that has a web application named WebRole1.
WebRole1 writes error messages to the Windows Event Log.
Users report receiving an error page with the following message: "Event 26 has occurred.
Contact your system administrator."
You need to access the WebRole1 event log.
Which three actions should you perform? Each correct answer presents part of the solution.
A. Update the WebRole1 web.config file.
B. Create a storage account.
C. Update the cloud service definition file and the service configuration file.
D. Run the Set-AzureVMDiagnosticsExtensionPowerShell cmdlet.
E. Run the Enable-AzureWebsiteApplicationDiagnostic PowerShell cmdlet.
F. Enable verbose monitoring.
Answer: B,C,F
Explanation:
step 1 specify the scheduled TransferLogLevelFilter to Verbose in the diagnostics.wadcfg step 2 Update the cloud service definition file and the service configuration file (.cspkg) step 3 best practice is to create a separate storage account for logging diagnostics data
References: http://azure.microsoft.com/en-us/documentation/articles/cloud-services-how-to-monitor/
F. _65503_
Answer: E
Explanation:
http://www.cisco.com/c/en/us/td/docs/ios/12_2/termserv/configuration/guide/ftersv_c/tcfaap re.htmlNEW QUESTION: 3
An engineer has integrated a new DMVPN to link remote offices across the internet using Cisco IOS routers. When connecting to remote sites, pings and voice data appear to flow properly and all tunnel stats seem to show that are up. However, when trying to connect to a remote server using RDP, the connection fails. Which action resolves this issue?
A. Add RDP port to the extended ACL.
B. Replace certificate on the RDP server.
C. Adjust the MTU size within the routers.
D. Change DMVPN timeout values.
Answer: BNEW QUESTION: 4
questions
You manage a cloud service that has a web application named WebRole1.
WebRole1 writes error messages to the Windows Event Log.
Users report receiving an error page with the following message: "Event 26 has occurred.
Contact your system administrator."
You need to access the WebRole1 event log.
Which three actions should you perform? Each correct answer presents part of the solution.
A. Update the WebRole1 web.config file.
B. Create a storage account.
C. Update the cloud service definition file and the service configuration file.
D. Run the Set-AzureVMDiagnosticsExtensionPowerShell cmdlet.
E. Run the Enable-AzureWebsiteApplicationDiagnostic PowerShell cmdlet.
F. Enable verbose monitoring.
Answer: B,C,F
Explanation:
step 1 specify the scheduled TransferLogLevelFilter to Verbose in the diagnostics.wadcfg step 2 Update the cloud service definition file and the service configuration file (.cspkg) step 3 best practice is to create a separate storage account for logging diagnostics data
References: http://azure.microsoft.com/en-us/documentation/articles/cloud-services-how-to-monitor/
Our Unlimited Access Package will prepare you for your exam with guaranteed results, surpassing other PEXFND-EX 65503 .*
F. _65503_
Answer: E
Explanation:
http://www.cisco.com/c/en/us/td/docs/ios/12_2/termserv/configuration/guide/ftersv_c/tcfaap re.html
NEW QUESTION: 3
An engineer has integrated a new DMVPN to link remote offices across the internet using Cisco IOS routers. When connecting to remote sites, pings and voice data appear to flow properly and all tunnel stats seem to show that are up. However, when trying to connect to a remote server using RDP, the connection fails. Which action resolves this issue?
A. Add RDP port to the extended ACL.
B. Replace certificate on the RDP server.
C. Adjust the MTU size within the routers.
D. Change DMVPN timeout values.
Answer: B
NEW QUESTION: 4
You manage a cloud service that has a web application named WebRole1.
WebRole1 writes error messages to the Windows Event Log.
Users report receiving an error page with the following message: "Event 26 has occurred.
Contact your system administrator."
You need to access the WebRole1 event log.
Which three actions should you perform? Each correct answer presents part of the solution.
A. Update the WebRole1 web.config file.
B. Create a storage account.
C. Update the cloud service definition file and the service configuration file.
D. Run the Set-AzureVMDiagnosticsExtensionPowerShell cmdlet.
E. Run the Enable-AzureWebsiteApplicationDiagnostic PowerShell cmdlet.
F. Enable verbose monitoring.
Answer: B,C,F
Explanation:
step 1 specify the scheduled TransferLogLevelFilter to Verbose in the diagnostics.wadcfg step 2 Update the cloud service definition file and the service configuration file (.cspkg) step 3 best practice is to create a separate storage account for logging diagnostics data
References: http://azure.microsoft.com/en-us/documentation/articles/cloud-services-how-to-monitor/
F. _65503_
Answer: E
Explanation:
http://www.cisco.com/c/en/us/td/docs/ios/12_2/termserv/configuration/guide/ftersv_c/tcfaap re.html
NEW QUESTION: 3
An engineer has integrated a new DMVPN to link remote offices across the internet using Cisco IOS routers. When connecting to remote sites, pings and voice data appear to flow properly and all tunnel stats seem to show that are up. However, when trying to connect to a remote server using RDP, the connection fails. Which action resolves this issue?
A. Add RDP port to the extended ACL.
B. Replace certificate on the RDP server.
C. Adjust the MTU size within the routers.
D. Change DMVPN timeout values.
Answer: B
NEW QUESTION: 4
You manage a cloud service that has a web application named WebRole1.
WebRole1 writes error messages to the Windows Event Log.
Users report receiving an error page with the following message: "Event 26 has occurred.
Contact your system administrator."
You need to access the WebRole1 event log.
Which three actions should you perform? Each correct answer presents part of the solution.
A. Update the WebRole1 web.config file.
B. Create a storage account.
C. Update the cloud service definition file and the service configuration file.
D. Run the Set-AzureVMDiagnosticsExtensionPowerShell cmdlet.
E. Run the Enable-AzureWebsiteApplicationDiagnostic PowerShell cmdlet.
F. Enable verbose monitoring.
Answer: B,C,F
Explanation:
step 1 specify the scheduled TransferLogLevelFilter to Verbose in the diagnostics.wadcfg step 2 Update the cloud service definition file and the service configuration file (.cspkg) step 3 best practice is to create a separate storage account for logging diagnostics data
References: http://azure.microsoft.com/en-us/documentation/articles/cloud-services-how-to-monitor/
F. _65503_
Answer: E
Explanation:
http://www.cisco.com/c/en/us/td/docs/ios/12_2/termserv/configuration/guide/ftersv_c/tcfaap re.html
NEW QUESTION: 3
An engineer has integrated a new DMVPN to link remote offices across the internet using Cisco IOS routers. When connecting to remote sites, pings and voice data appear to flow properly and all tunnel stats seem to show that are up. However, when trying to connect to a remote server using RDP, the connection fails. Which action resolves this issue?
A. Add RDP port to the extended ACL.
B. Replace certificate on the RDP server.
C. Adjust the MTU size within the routers.
D. Change DMVPN timeout values.
Answer: B
NEW QUESTION: 4
You manage a cloud service that has a web application named WebRole1.
WebRole1 writes error messages to the Windows Event Log.
Users report receiving an error page with the following message: "Event 26 has occurred.
Contact your system administrator."
You need to access the WebRole1 event log.
Which three actions should you perform? Each correct answer presents part of the solution.
A. Update the WebRole1 web.config file.
B. Create a storage account.
C. Update the cloud service definition file and the service configuration file.
D. Run the Set-AzureVMDiagnosticsExtensionPowerShell cmdlet.
E. Run the Enable-AzureWebsiteApplicationDiagnostic PowerShell cmdlet.
F. Enable verbose monitoring.
Answer: B,C,F
Explanation:
step 1 specify the scheduled TransferLogLevelFilter to Verbose in the diagnostics.wadcfg step 2 Update the cloud service definition file and the service configuration file (.cspkg) step 3 best practice is to create a separate storage account for logging diagnostics data
References: http://azure.microsoft.com/en-us/documentation/articles/cloud-services-how-to-monitor/
F. _65503_
Answer: E
Explanation:
http://www.cisco.com/c/en/us/td/docs/ios/12_2/termserv/configuration/guide/ftersv_c/tcfaap re.html
NEW QUESTION: 3
An engineer has integrated a new DMVPN to link remote offices across the internet using Cisco IOS routers. When connecting to remote sites, pings and voice data appear to flow properly and all tunnel stats seem to show that are up. However, when trying to connect to a remote server using RDP, the connection fails. Which action resolves this issue?
A. Add RDP port to the extended ACL.
B. Replace certificate on the RDP server.
C. Adjust the MTU size within the routers.
D. Change DMVPN timeout values.
Answer: B
NEW QUESTION: 4
You manage a cloud service that has a web application named WebRole1.
WebRole1 writes error messages to the Windows Event Log.
Users report receiving an error page with the following message: "Event 26 has occurred.
Contact your system administrator."
You need to access the WebRole1 event log.
Which three actions should you perform? Each correct answer presents part of the solution.
A. Update the WebRole1 web.config file.
B. Create a storage account.
C. Update the cloud service definition file and the service configuration file.
D. Run the Set-AzureVMDiagnosticsExtensionPowerShell cmdlet.
E. Run the Enable-AzureWebsiteApplicationDiagnostic PowerShell cmdlet.
F. Enable verbose monitoring.
Answer: B,C,F
Explanation:
step 1 specify the scheduled TransferLogLevelFilter to Verbose in the diagnostics.wadcfg step 2 Update the cloud service definition file and the service configuration file (.cspkg) step 3 best practice is to create a separate storage account for logging diagnostics data
References: http://azure.microsoft.com/en-us/documentation/articles/cloud-services-how-to-monitor/
F. _65503_
Answer: E
Explanation:
http://www.cisco.com/c/en/us/td/docs/ios/12_2/termserv/configuration/guide/ftersv_c/tcfaap re.html
NEW QUESTION: 3
An engineer has integrated a new DMVPN to link remote offices across the internet using Cisco IOS routers. When connecting to remote sites, pings and voice data appear to flow properly and all tunnel stats seem to show that are up. However, when trying to connect to a remote server using RDP, the connection fails. Which action resolves this issue?
A. Add RDP port to the extended ACL.
B. Replace certificate on the RDP server.
C. Adjust the MTU size within the routers.
D. Change DMVPN timeout values.
Answer: B
NEW QUESTION: 4
You manage a cloud service that has a web application named WebRole1.
WebRole1 writes error messages to the Windows Event Log.
Users report receiving an error page with the following message: "Event 26 has occurred.
Contact your system administrator."
You need to access the WebRole1 event log.
Which three actions should you perform? Each correct answer presents part of the solution.
A. Update the WebRole1 web.config file.
B. Create a storage account.
C. Update the cloud service definition file and the service configuration file.
D. Run the Set-AzureVMDiagnosticsExtensionPowerShell cmdlet.
E. Run the Enable-AzureWebsiteApplicationDiagnostic PowerShell cmdlet.
F. Enable verbose monitoring.
Answer: B,C,F
Explanation:
step 1 specify the scheduled TransferLogLevelFilter to Verbose in the diagnostics.wadcfg step 2 Update the cloud service definition file and the service configuration file (.cspkg) step 3 best practice is to create a separate storage account for logging diagnostics data
References: http://azure.microsoft.com/en-us/documentation/articles/cloud-services-how-to-monitor/
F. _65503_
Answer: E
Explanation:
http://www.cisco.com/c/en/us/td/docs/ios/12_2/termserv/configuration/guide/ftersv_c/tcfaap re.html
NEW QUESTION: 3
An engineer has integrated a new DMVPN to link remote offices across the internet using Cisco IOS routers. When connecting to remote sites, pings and voice data appear to flow properly and all tunnel stats seem to show that are up. However, when trying to connect to a remote server using RDP, the connection fails. Which action resolves this issue?
A. Add RDP port to the extended ACL.
B. Replace certificate on the RDP server.
C. Adjust the MTU size within the routers.
D. Change DMVPN timeout values.
Answer: B
NEW QUESTION: 4
You manage a cloud service that has a web application named WebRole1.
WebRole1 writes error messages to the Windows Event Log.
Users report receiving an error page with the following message: "Event 26 has occurred.
Contact your system administrator."
You need to access the WebRole1 event log.
Which three actions should you perform? Each correct answer presents part of the solution.
A. Update the WebRole1 web.config file.
B. Create a storage account.
C. Update the cloud service definition file and the service configuration file.
D. Run the Set-AzureVMDiagnosticsExtensionPowerShell cmdlet.
E. Run the Enable-AzureWebsiteApplicationDiagnostic PowerShell cmdlet.
F. Enable verbose monitoring.
Answer: B,C,F
Explanation:
step 1 specify the scheduled TransferLogLevelFilter to Verbose in the diagnostics.wadcfg step 2 Update the cloud service definition file and the service configuration file (.cspkg) step 3 best practice is to create a separate storage account for logging diagnostics data
References: http://azure.microsoft.com/en-us/documentation/articles/cloud-services-how-to-monitor/
Skip all the worthless PEXFND-EX 65503 .*
F. _65503_
Answer: E
Explanation:
http://www.cisco.com/c/en/us/td/docs/ios/12_2/termserv/configuration/guide/ftersv_c/tcfaap re.html
NEW QUESTION: 3
An engineer has integrated a new DMVPN to link remote offices across the internet using Cisco IOS routers. When connecting to remote sites, pings and voice data appear to flow properly and all tunnel stats seem to show that are up. However, when trying to connect to a remote server using RDP, the connection fails. Which action resolves this issue?
A. Add RDP port to the extended ACL.
B. Replace certificate on the RDP server.
C. Adjust the MTU size within the routers.
D. Change DMVPN timeout values.
Answer: B
NEW QUESTION: 4
You manage a cloud service that has a web application named WebRole1.
WebRole1 writes error messages to the Windows Event Log.
Users report receiving an error page with the following message: "Event 26 has occurred.
Contact your system administrator."
You need to access the WebRole1 event log.
Which three actions should you perform? Each correct answer presents part of the solution.
A. Update the WebRole1 web.config file.
B. Create a storage account.
C. Update the cloud service definition file and the service configuration file.
D. Run the Set-AzureVMDiagnosticsExtensionPowerShell cmdlet.
E. Run the Enable-AzureWebsiteApplicationDiagnostic PowerShell cmdlet.
F. Enable verbose monitoring.
Answer: B,C,F
Explanation:
step 1 specify the scheduled TransferLogLevelFilter to Verbose in the diagnostics.wadcfg step 2 Update the cloud service definition file and the service configuration file (.cspkg) step 3 best practice is to create a separate storage account for logging diagnostics data
References: http://azure.microsoft.com/en-us/documentation/articles/cloud-services-how-to-monitor/
- JavaScript-Developer-I Test Dump
- P-C4H340-34 New Soft Simulations
- CIPP-C Interactive Practice Exam
- D-ECS-OE-23 Test Questions
- Study PSK-I Demo
- C-WZADM-01 Reliable Test Pattern
- Demo C-THR86-2305 Test
- New Salesforce-Communications-Cloud Exam Dumps
- CV0-003 Exam Test
- 500-445 Reliable Test Sims
- Exam Dumps ADX-201 Collection
- Certified-Strategy-Designer Practice Engine
- Certification H12-891_V1.0-ENU Test Answers
- New Exam C-TS450-2020 Braindumps
- Valid Test C1000-143 Bootcamp
- PEXFND-EX Latest Test Questions
- NSE6_FSW-7.2 Valid Exam Voucher
- Exam Dumps SPLK-1002 Pdf
- C-S4CMA-2308 Detail Explanation
- Exam E_S4CPE_2023 Quiz
- Latest C-IBP-2305 Learning Material
- C_THR82_2205 Exam Engine
- JN0-363 Reliable Study Guide
- 1z0-1065-23 Valid Test Discount
65503 .*
F. _65503_
Answer: E
Explanation:
http://www.cisco.com/c/en/us/td/docs/ios/12_2/termserv/configuration/guide/ftersv_c/tcfaap re.html
NEW QUESTION: 3
An engineer has integrated a new DMVPN to link remote offices across the internet using Cisco IOS routers. When connecting to remote sites, pings and voice data appear to flow properly and all tunnel stats seem to show that are up. However, when trying to connect to a remote server using RDP, the connection fails. Which action resolves this issue?
A. Add RDP port to the extended ACL.
B. Replace certificate on the RDP server.
C. Adjust the MTU size within the routers.
D. Change DMVPN timeout values.
Answer: B
NEW QUESTION: 4
You manage a cloud service that has a web application named WebRole1.
WebRole1 writes error messages to the Windows Event Log.
Users report receiving an error page with the following message: "Event 26 has occurred.
Contact your system administrator."
You need to access the WebRole1 event log.
Which three actions should you perform? Each correct answer presents part of the solution.
A. Update the WebRole1 web.config file.
B. Create a storage account.
C. Update the cloud service definition file and the service configuration file.
D. Run the Set-AzureVMDiagnosticsExtensionPowerShell cmdlet.
E. Run the Enable-AzureWebsiteApplicationDiagnostic PowerShell cmdlet.
F. Enable verbose monitoring.
Answer: B,C,F
Explanation:
step 1 specify the scheduled TransferLogLevelFilter to Verbose in the diagnostics.wadcfg step 2 Update the cloud service definition file and the service configuration file (.cspkg) step 3 best practice is to create a separate storage account for logging diagnostics data
References: http://azure.microsoft.com/en-us/documentation/articles/cloud-services-how-to-monitor/
Difficulty finding the right PEXFND-EX 65503 .*
F. _65503_
Answer: E
Explanation:
http://www.cisco.com/c/en/us/td/docs/ios/12_2/termserv/configuration/guide/ftersv_c/tcfaap re.html
NEW QUESTION: 3
An engineer has integrated a new DMVPN to link remote offices across the internet using Cisco IOS routers. When connecting to remote sites, pings and voice data appear to flow properly and all tunnel stats seem to show that are up. However, when trying to connect to a remote server using RDP, the connection fails. Which action resolves this issue?
A. Add RDP port to the extended ACL.
B. Replace certificate on the RDP server.
C. Adjust the MTU size within the routers.
D. Change DMVPN timeout values.
Answer: B
NEW QUESTION: 4
You manage a cloud service that has a web application named WebRole1.
WebRole1 writes error messages to the Windows Event Log.
Users report receiving an error page with the following message: "Event 26 has occurred.
Contact your system administrator."
You need to access the WebRole1 event log.
Which three actions should you perform? Each correct answer presents part of the solution.
A. Update the WebRole1 web.config file.
B. Create a storage account.
C. Update the cloud service definition file and the service configuration file.
D. Run the Set-AzureVMDiagnosticsExtensionPowerShell cmdlet.
E. Run the Enable-AzureWebsiteApplicationDiagnostic PowerShell cmdlet.
F. Enable verbose monitoring.
Answer: B,C,F
Explanation:
step 1 specify the scheduled TransferLogLevelFilter to Verbose in the diagnostics.wadcfg step 2 Update the cloud service definition file and the service configuration file (.cspkg) step 3 best practice is to create a separate storage account for logging diagnostics data
References: http://azure.microsoft.com/en-us/documentation/articles/cloud-services-how-to-monitor/
F. _65503_
Answer: E
Explanation:
http://www.cisco.com/c/en/us/td/docs/ios/12_2/termserv/configuration/guide/ftersv_c/tcfaap re.html
NEW QUESTION: 3
An engineer has integrated a new DMVPN to link remote offices across the internet using Cisco IOS routers. When connecting to remote sites, pings and voice data appear to flow properly and all tunnel stats seem to show that are up. However, when trying to connect to a remote server using RDP, the connection fails. Which action resolves this issue?
A. Add RDP port to the extended ACL.
B. Replace certificate on the RDP server.
C. Adjust the MTU size within the routers.
D. Change DMVPN timeout values.
Answer: B
NEW QUESTION: 4
You manage a cloud service that has a web application named WebRole1.
WebRole1 writes error messages to the Windows Event Log.
Users report receiving an error page with the following message: "Event 26 has occurred.
Contact your system administrator."
You need to access the WebRole1 event log.
Which three actions should you perform? Each correct answer presents part of the solution.
A. Update the WebRole1 web.config file.
B. Create a storage account.
C. Update the cloud service definition file and the service configuration file.
D. Run the Set-AzureVMDiagnosticsExtensionPowerShell cmdlet.
E. Run the Enable-AzureWebsiteApplicationDiagnostic PowerShell cmdlet.
F. Enable verbose monitoring.
Answer: B,C,F
Explanation:
step 1 specify the scheduled TransferLogLevelFilter to Verbose in the diagnostics.wadcfg step 2 Update the cloud service definition file and the service configuration file (.cspkg) step 3 best practice is to create a separate storage account for logging diagnostics data
References: http://azure.microsoft.com/en-us/documentation/articles/cloud-services-how-to-monitor/
F. _65503_
Answer: E
Explanation:
http://www.cisco.com/c/en/us/td/docs/ios/12_2/termserv/configuration/guide/ftersv_c/tcfaap re.html
NEW QUESTION: 3
An engineer has integrated a new DMVPN to link remote offices across the internet using Cisco IOS routers. When connecting to remote sites, pings and voice data appear to flow properly and all tunnel stats seem to show that are up. However, when trying to connect to a remote server using RDP, the connection fails. Which action resolves this issue?
A. Add RDP port to the extended ACL.
B. Replace certificate on the RDP server.
C. Adjust the MTU size within the routers.
D. Change DMVPN timeout values.
Answer: B
NEW QUESTION: 4
You manage a cloud service that has a web application named WebRole1.
WebRole1 writes error messages to the Windows Event Log.
Users report receiving an error page with the following message: "Event 26 has occurred.
Contact your system administrator."
You need to access the WebRole1 event log.
Which three actions should you perform? Each correct answer presents part of the solution.
A. Update the WebRole1 web.config file.
B. Create a storage account.
C. Update the cloud service definition file and the service configuration file.
D. Run the Set-AzureVMDiagnosticsExtensionPowerShell cmdlet.
E. Run the Enable-AzureWebsiteApplicationDiagnostic PowerShell cmdlet.
F. Enable verbose monitoring.
Answer: B,C,F
Explanation:
step 1 specify the scheduled TransferLogLevelFilter to Verbose in the diagnostics.wadcfg step 2 Update the cloud service definition file and the service configuration file (.cspkg) step 3 best practice is to create a separate storage account for logging diagnostics data
References: http://azure.microsoft.com/en-us/documentation/articles/cloud-services-how-to-monitor/
F. _65503_
Answer: E
Explanation:
http://www.cisco.com/c/en/us/td/docs/ios/12_2/termserv/configuration/guide/ftersv_c/tcfaap re.html
NEW QUESTION: 3
An engineer has integrated a new DMVPN to link remote offices across the internet using Cisco IOS routers. When connecting to remote sites, pings and voice data appear to flow properly and all tunnel stats seem to show that are up. However, when trying to connect to a remote server using RDP, the connection fails. Which action resolves this issue?
A. Add RDP port to the extended ACL.
B. Replace certificate on the RDP server.
C. Adjust the MTU size within the routers.
D. Change DMVPN timeout values.
Answer: B
NEW QUESTION: 4
You manage a cloud service that has a web application named WebRole1.
WebRole1 writes error messages to the Windows Event Log.
Users report receiving an error page with the following message: "Event 26 has occurred.
Contact your system administrator."
You need to access the WebRole1 event log.
Which three actions should you perform? Each correct answer presents part of the solution.
A. Update the WebRole1 web.config file.
B. Create a storage account.
C. Update the cloud service definition file and the service configuration file.
D. Run the Set-AzureVMDiagnosticsExtensionPowerShell cmdlet.
E. Run the Enable-AzureWebsiteApplicationDiagnostic PowerShell cmdlet.
F. Enable verbose monitoring.
Answer: B,C,F
Explanation:
step 1 specify the scheduled TransferLogLevelFilter to Verbose in the diagnostics.wadcfg step 2 Update the cloud service definition file and the service configuration file (.cspkg) step 3 best practice is to create a separate storage account for logging diagnostics data
References: http://azure.microsoft.com/en-us/documentation/articles/cloud-services-how-to-monitor/
- JavaScript-Developer-I Test Dump
- P-C4H340-34 New Soft Simulations
- CIPP-C Interactive Practice Exam
- D-ECS-OE-23 Test Questions
- Study PSK-I Demo
- C-WZADM-01 Reliable Test Pattern
- Demo C-THR86-2305 Test
- New Salesforce-Communications-Cloud Exam Dumps
- CV0-003 Exam Test
- 500-445 Reliable Test Sims
- Exam Dumps ADX-201 Collection
- Certified-Strategy-Designer Practice Engine
- Certification H12-891_V1.0-ENU Test Answers
- New Exam C-TS450-2020 Braindumps
- Valid Test C1000-143 Bootcamp
- PEXFND-EX Latest Test Questions
- NSE6_FSW-7.2 Valid Exam Voucher
- Exam Dumps SPLK-1002 Pdf
- C-S4CMA-2308 Detail Explanation
- Exam E_S4CPE_2023 Quiz
- Latest C-IBP-2305 Learning Material
- C_THR82_2205 Exam Engine
- JN0-363 Reliable Study Guide
- 1z0-1065-23 Valid Test Discount
F. _65503_
Answer: E
Explanation:
http://www.cisco.com/c/en/us/td/docs/ios/12_2/termserv/configuration/guide/ftersv_c/tcfaap re.html
NEW QUESTION: 3
An engineer has integrated a new DMVPN to link remote offices across the internet using Cisco IOS routers. When connecting to remote sites, pings and voice data appear to flow properly and all tunnel stats seem to show that are up. However, when trying to connect to a remote server using RDP, the connection fails. Which action resolves this issue?
A. Add RDP port to the extended ACL.
B. Replace certificate on the RDP server.
C. Adjust the MTU size within the routers.
D. Change DMVPN timeout values.
Answer: B
NEW QUESTION: 4
You manage a cloud service that has a web application named WebRole1.
WebRole1 writes error messages to the Windows Event Log.
Users report receiving an error page with the following message: "Event 26 has occurred.
Contact your system administrator."
You need to access the WebRole1 event log.
Which three actions should you perform? Each correct answer presents part of the solution.
A. Update the WebRole1 web.config file.
B. Create a storage account.
C. Update the cloud service definition file and the service configuration file.
D. Run the Set-AzureVMDiagnosticsExtensionPowerShell cmdlet.
E. Run the Enable-AzureWebsiteApplicationDiagnostic PowerShell cmdlet.
F. Enable verbose monitoring.
Answer: B,C,F
Explanation:
step 1 specify the scheduled TransferLogLevelFilter to Verbose in the diagnostics.wadcfg step 2 Update the cloud service definition file and the service configuration file (.cspkg) step 3 best practice is to create a separate storage account for logging diagnostics data
References: http://azure.microsoft.com/en-us/documentation/articles/cloud-services-how-to-monitor/
- JavaScript-Developer-I Test Dump
- P-C4H340-34 New Soft Simulations
- CIPP-C Interactive Practice Exam
- D-ECS-OE-23 Test Questions
- Study PSK-I Demo
- C-WZADM-01 Reliable Test Pattern
- Demo C-THR86-2305 Test
- New Salesforce-Communications-Cloud Exam Dumps
- CV0-003 Exam Test
- 500-445 Reliable Test Sims
- Exam Dumps ADX-201 Collection
- Certified-Strategy-Designer Practice Engine
- Certification H12-891_V1.0-ENU Test Answers
- New Exam C-TS450-2020 Braindumps
- Valid Test C1000-143 Bootcamp
- PEXFND-EX Latest Test Questions
- NSE6_FSW-7.2 Valid Exam Voucher
- Exam Dumps SPLK-1002 Pdf
- C-S4CMA-2308 Detail Explanation
- Exam E_S4CPE_2023 Quiz
- Latest C-IBP-2305 Learning Material
- C_THR82_2205 Exam Engine
- JN0-363 Reliable Study Guide
- 1z0-1065-23 Valid Test Discount
F. _65503_
Answer: E
Explanation:
http://www.cisco.com/c/en/us/td/docs/ios/12_2/termserv/configuration/guide/ftersv_c/tcfaap re.html
NEW QUESTION: 3
An engineer has integrated a new DMVPN to link remote offices across the internet using Cisco IOS routers. When connecting to remote sites, pings and voice data appear to flow properly and all tunnel stats seem to show that are up. However, when trying to connect to a remote server using RDP, the connection fails. Which action resolves this issue?
A. Add RDP port to the extended ACL.
B. Replace certificate on the RDP server.
C. Adjust the MTU size within the routers.
D. Change DMVPN timeout values.
Answer: B
NEW QUESTION: 4
You manage a cloud service that has a web application named WebRole1.
WebRole1 writes error messages to the Windows Event Log.
Users report receiving an error page with the following message: "Event 26 has occurred.
Contact your system administrator."
You need to access the WebRole1 event log.
Which three actions should you perform? Each correct answer presents part of the solution.
A. Update the WebRole1 web.config file.
B. Create a storage account.
C. Update the cloud service definition file and the service configuration file.
D. Run the Set-AzureVMDiagnosticsExtensionPowerShell cmdlet.
E. Run the Enable-AzureWebsiteApplicationDiagnostic PowerShell cmdlet.
F. Enable verbose monitoring.
Answer: B,C,F
Explanation:
step 1 specify the scheduled TransferLogLevelFilter to Verbose in the diagnostics.wadcfg step 2 Update the cloud service definition file and the service configuration file (.cspkg) step 3 best practice is to create a separate storage account for logging diagnostics data
References: http://azure.microsoft.com/en-us/documentation/articles/cloud-services-how-to-monitor/
F. _65503_
Answer: E
Explanation:
http://www.cisco.com/c/en/us/td/docs/ios/12_2/termserv/configuration/guide/ftersv_c/tcfaap re.html
NEW QUESTION: 3
An engineer has integrated a new DMVPN to link remote offices across the internet using Cisco IOS routers. When connecting to remote sites, pings and voice data appear to flow properly and all tunnel stats seem to show that are up. However, when trying to connect to a remote server using RDP, the connection fails. Which action resolves this issue?
A. Add RDP port to the extended ACL.
B. Replace certificate on the RDP server.
C. Adjust the MTU size within the routers.
D. Change DMVPN timeout values.
Answer: B
NEW QUESTION: 4
You manage a cloud service that has a web application named WebRole1.
WebRole1 writes error messages to the Windows Event Log.
Users report receiving an error page with the following message: "Event 26 has occurred.
Contact your system administrator."
You need to access the WebRole1 event log.
Which three actions should you perform? Each correct answer presents part of the solution.
A. Update the WebRole1 web.config file.
B. Create a storage account.
C. Update the cloud service definition file and the service configuration file.
D. Run the Set-AzureVMDiagnosticsExtensionPowerShell cmdlet.
E. Run the Enable-AzureWebsiteApplicationDiagnostic PowerShell cmdlet.
F. Enable verbose monitoring.
Answer: B,C,F
Explanation:
step 1 specify the scheduled TransferLogLevelFilter to Verbose in the diagnostics.wadcfg step 2 Update the cloud service definition file and the service configuration file (.cspkg) step 3 best practice is to create a separate storage account for logging diagnostics data
References: http://azure.microsoft.com/en-us/documentation/articles/cloud-services-how-to-monitor/
F. _65503_
Answer: E
Explanation:
http://www.cisco.com/c/en/us/td/docs/ios/12_2/termserv/configuration/guide/ftersv_c/tcfaap re.html
NEW QUESTION: 3
An engineer has integrated a new DMVPN to link remote offices across the internet using Cisco IOS routers. When connecting to remote sites, pings and voice data appear to flow properly and all tunnel stats seem to show that are up. However, when trying to connect to a remote server using RDP, the connection fails. Which action resolves this issue?
A. Add RDP port to the extended ACL.
B. Replace certificate on the RDP server.
C. Adjust the MTU size within the routers.
D. Change DMVPN timeout values.
Answer: B
NEW QUESTION: 4
You manage a cloud service that has a web application named WebRole1.
WebRole1 writes error messages to the Windows Event Log.
Users report receiving an error page with the following message: "Event 26 has occurred.
Contact your system administrator."
You need to access the WebRole1 event log.
Which three actions should you perform? Each correct answer presents part of the solution.
A. Update the WebRole1 web.config file.
B. Create a storage account.
C. Update the cloud service definition file and the service configuration file.
D. Run the Set-AzureVMDiagnosticsExtensionPowerShell cmdlet.
E. Run the Enable-AzureWebsiteApplicationDiagnostic PowerShell cmdlet.
F. Enable verbose monitoring.
Answer: B,C,F
Explanation:
step 1 specify the scheduled TransferLogLevelFilter to Verbose in the diagnostics.wadcfg step 2 Update the cloud service definition file and the service configuration file (.cspkg) step 3 best practice is to create a separate storage account for logging diagnostics data
References: http://azure.microsoft.com/en-us/documentation/articles/cloud-services-how-to-monitor/
65503 .*
F. _65503_
Answer: E
Explanation:
http://www.cisco.com/c/en/us/td/docs/ios/12_2/termserv/configuration/guide/ftersv_c/tcfaap re.html
NEW QUESTION: 3
An engineer has integrated a new DMVPN to link remote offices across the internet using Cisco IOS routers. When connecting to remote sites, pings and voice data appear to flow properly and all tunnel stats seem to show that are up. However, when trying to connect to a remote server using RDP, the connection fails. Which action resolves this issue?
A. Add RDP port to the extended ACL.
B. Replace certificate on the RDP server.
C. Adjust the MTU size within the routers.
D. Change DMVPN timeout values.
Answer: B
NEW QUESTION: 4
You manage a cloud service that has a web application named WebRole1.
WebRole1 writes error messages to the Windows Event Log.
Users report receiving an error page with the following message: "Event 26 has occurred.
Contact your system administrator."
You need to access the WebRole1 event log.
Which three actions should you perform? Each correct answer presents part of the solution.
A. Update the WebRole1 web.config file.
B. Create a storage account.
C. Update the cloud service definition file and the service configuration file.
D. Run the Set-AzureVMDiagnosticsExtensionPowerShell cmdlet.
E. Run the Enable-AzureWebsiteApplicationDiagnostic PowerShell cmdlet.
F. Enable verbose monitoring.
Answer: B,C,F
Explanation:
step 1 specify the scheduled TransferLogLevelFilter to Verbose in the diagnostics.wadcfg step 2 Update the cloud service definition file and the service configuration file (.cspkg) step 3 best practice is to create a separate storage account for logging diagnostics data
References: http://azure.microsoft.com/en-us/documentation/articles/cloud-services-how-to-monitor/
Still searching for PEXFND-EX 65503 .*
F. _65503_
Answer: E
Explanation:
http://www.cisco.com/c/en/us/td/docs/ios/12_2/termserv/configuration/guide/ftersv_c/tcfaap re.html
NEW QUESTION: 3
An engineer has integrated a new DMVPN to link remote offices across the internet using Cisco IOS routers. When connecting to remote sites, pings and voice data appear to flow properly and all tunnel stats seem to show that are up. However, when trying to connect to a remote server using RDP, the connection fails. Which action resolves this issue?
A. Add RDP port to the extended ACL.
B. Replace certificate on the RDP server.
C. Adjust the MTU size within the routers.
D. Change DMVPN timeout values.
Answer: B
NEW QUESTION: 4
You manage a cloud service that has a web application named WebRole1.
WebRole1 writes error messages to the Windows Event Log.
Users report receiving an error page with the following message: "Event 26 has occurred.
Contact your system administrator."
You need to access the WebRole1 event log.
Which three actions should you perform? Each correct answer presents part of the solution.
A. Update the WebRole1 web.config file.
B. Create a storage account.
C. Update the cloud service definition file and the service configuration file.
D. Run the Set-AzureVMDiagnosticsExtensionPowerShell cmdlet.
E. Run the Enable-AzureWebsiteApplicationDiagnostic PowerShell cmdlet.
F. Enable verbose monitoring.
Answer: B,C,F
Explanation:
step 1 specify the scheduled TransferLogLevelFilter to Verbose in the diagnostics.wadcfg step 2 Update the cloud service definition file and the service configuration file (.cspkg) step 3 best practice is to create a separate storage account for logging diagnostics data
References: http://azure.microsoft.com/en-us/documentation/articles/cloud-services-how-to-monitor/
F. _65503_
Answer: E
Explanation:
http://www.cisco.com/c/en/us/td/docs/ios/12_2/termserv/configuration/guide/ftersv_c/tcfaap re.html
NEW QUESTION: 3
An engineer has integrated a new DMVPN to link remote offices across the internet using Cisco IOS routers. When connecting to remote sites, pings and voice data appear to flow properly and all tunnel stats seem to show that are up. However, when trying to connect to a remote server using RDP, the connection fails. Which action resolves this issue?
A. Add RDP port to the extended ACL.
B. Replace certificate on the RDP server.
C. Adjust the MTU size within the routers.
D. Change DMVPN timeout values.
Answer: B
NEW QUESTION: 4
You manage a cloud service that has a web application named WebRole1.
WebRole1 writes error messages to the Windows Event Log.
Users report receiving an error page with the following message: "Event 26 has occurred.
Contact your system administrator."
You need to access the WebRole1 event log.
Which three actions should you perform? Each correct answer presents part of the solution.
A. Update the WebRole1 web.config file.
B. Create a storage account.
C. Update the cloud service definition file and the service configuration file.
D. Run the Set-AzureVMDiagnosticsExtensionPowerShell cmdlet.
E. Run the Enable-AzureWebsiteApplicationDiagnostic PowerShell cmdlet.
F. Enable verbose monitoring.
Answer: B,C,F
Explanation:
step 1 specify the scheduled TransferLogLevelFilter to Verbose in the diagnostics.wadcfg step 2 Update the cloud service definition file and the service configuration file (.cspkg) step 3 best practice is to create a separate storage account for logging diagnostics data
References: http://azure.microsoft.com/en-us/documentation/articles/cloud-services-how-to-monitor/
F. _65503_
Answer: E
Explanation:
http://www.cisco.com/c/en/us/td/docs/ios/12_2/termserv/configuration/guide/ftersv_c/tcfaap re.html
NEW QUESTION: 3
An engineer has integrated a new DMVPN to link remote offices across the internet using Cisco IOS routers. When connecting to remote sites, pings and voice data appear to flow properly and all tunnel stats seem to show that are up. However, when trying to connect to a remote server using RDP, the connection fails. Which action resolves this issue?
A. Add RDP port to the extended ACL.
B. Replace certificate on the RDP server.
C. Adjust the MTU size within the routers.
D. Change DMVPN timeout values.
Answer: B
NEW QUESTION: 4
You manage a cloud service that has a web application named WebRole1.
WebRole1 writes error messages to the Windows Event Log.
Users report receiving an error page with the following message: "Event 26 has occurred.
Contact your system administrator."
You need to access the WebRole1 event log.
Which three actions should you perform? Each correct answer presents part of the solution.
A. Update the WebRole1 web.config file.
B. Create a storage account.
C. Update the cloud service definition file and the service configuration file.
D. Run the Set-AzureVMDiagnosticsExtensionPowerShell cmdlet.
E. Run the Enable-AzureWebsiteApplicationDiagnostic PowerShell cmdlet.
F. Enable verbose monitoring.
Answer: B,C,F
Explanation:
step 1 specify the scheduled TransferLogLevelFilter to Verbose in the diagnostics.wadcfg step 2 Update the cloud service definition file and the service configuration file (.cspkg) step 3 best practice is to create a separate storage account for logging diagnostics data
References: http://azure.microsoft.com/en-us/documentation/articles/cloud-services-how-to-monitor/
F. _65503_
Answer: E
Explanation:
http://www.cisco.com/c/en/us/td/docs/ios/12_2/termserv/configuration/guide/ftersv_c/tcfaap re.html
NEW QUESTION: 3
An engineer has integrated a new DMVPN to link remote offices across the internet using Cisco IOS routers. When connecting to remote sites, pings and voice data appear to flow properly and all tunnel stats seem to show that are up. However, when trying to connect to a remote server using RDP, the connection fails. Which action resolves this issue?
A. Add RDP port to the extended ACL.
B. Replace certificate on the RDP server.
C. Adjust the MTU size within the routers.
D. Change DMVPN timeout values.
Answer: B
NEW QUESTION: 4
You manage a cloud service that has a web application named WebRole1.
WebRole1 writes error messages to the Windows Event Log.
Users report receiving an error page with the following message: "Event 26 has occurred.
Contact your system administrator."
You need to access the WebRole1 event log.
Which three actions should you perform? Each correct answer presents part of the solution.
A. Update the WebRole1 web.config file.
B. Create a storage account.
C. Update the cloud service definition file and the service configuration file.
D. Run the Set-AzureVMDiagnosticsExtensionPowerShell cmdlet.
E. Run the Enable-AzureWebsiteApplicationDiagnostic PowerShell cmdlet.
F. Enable verbose monitoring.
Answer: B,C,F
Explanation:
step 1 specify the scheduled TransferLogLevelFilter to Verbose in the diagnostics.wadcfg step 2 Update the cloud service definition file and the service configuration file (.cspkg) step 3 best practice is to create a separate storage account for logging diagnostics data
References: http://azure.microsoft.com/en-us/documentation/articles/cloud-services-how-to-monitor/
F. _65503_
Answer: E
Explanation:
http://www.cisco.com/c/en/us/td/docs/ios/12_2/termserv/configuration/guide/ftersv_c/tcfaap re.html
NEW QUESTION: 3
An engineer has integrated a new DMVPN to link remote offices across the internet using Cisco IOS routers. When connecting to remote sites, pings and voice data appear to flow properly and all tunnel stats seem to show that are up. However, when trying to connect to a remote server using RDP, the connection fails. Which action resolves this issue?
A. Add RDP port to the extended ACL.
B. Replace certificate on the RDP server.
C. Adjust the MTU size within the routers.
D. Change DMVPN timeout values.
Answer: B
NEW QUESTION: 4
You manage a cloud service that has a web application named WebRole1.
WebRole1 writes error messages to the Windows Event Log.
Users report receiving an error page with the following message: "Event 26 has occurred.
Contact your system administrator."
You need to access the WebRole1 event log.
Which three actions should you perform? Each correct answer presents part of the solution.
A. Update the WebRole1 web.config file.
B. Create a storage account.
C. Update the cloud service definition file and the service configuration file.
D. Run the Set-AzureVMDiagnosticsExtensionPowerShell cmdlet.
E. Run the Enable-AzureWebsiteApplicationDiagnostic PowerShell cmdlet.
F. Enable verbose monitoring.
Answer: B,C,F
Explanation:
step 1 specify the scheduled TransferLogLevelFilter to Verbose in the diagnostics.wadcfg step 2 Update the cloud service definition file and the service configuration file (.cspkg) step 3 best practice is to create a separate storage account for logging diagnostics data
References: http://azure.microsoft.com/en-us/documentation/articles/cloud-services-how-to-monitor/
F. _65503_
Answer: E
Explanation:
http://www.cisco.com/c/en/us/td/docs/ios/12_2/termserv/configuration/guide/ftersv_c/tcfaap re.html
NEW QUESTION: 3
An engineer has integrated a new DMVPN to link remote offices across the internet using Cisco IOS routers. When connecting to remote sites, pings and voice data appear to flow properly and all tunnel stats seem to show that are up. However, when trying to connect to a remote server using RDP, the connection fails. Which action resolves this issue?
A. Add RDP port to the extended ACL.
B. Replace certificate on the RDP server.
C. Adjust the MTU size within the routers.
D. Change DMVPN timeout values.
Answer: B
NEW QUESTION: 4
You manage a cloud service that has a web application named WebRole1.
WebRole1 writes error messages to the Windows Event Log.
Users report receiving an error page with the following message: "Event 26 has occurred.
Contact your system administrator."
You need to access the WebRole1 event log.
Which three actions should you perform? Each correct answer presents part of the solution.
A. Update the WebRole1 web.config file.
B. Create a storage account.
C. Update the cloud service definition file and the service configuration file.
D. Run the Set-AzureVMDiagnosticsExtensionPowerShell cmdlet.
E. Run the Enable-AzureWebsiteApplicationDiagnostic PowerShell cmdlet.
F. Enable verbose monitoring.
Answer: B,C,F
Explanation:
step 1 specify the scheduled TransferLogLevelFilter to Verbose in the diagnostics.wadcfg step 2 Update the cloud service definition file and the service configuration file (.cspkg) step 3 best practice is to create a separate storage account for logging diagnostics data
References: http://azure.microsoft.com/en-us/documentation/articles/cloud-services-how-to-monitor/
F. _65503_
Answer: E
Explanation:
http://www.cisco.com/c/en/us/td/docs/ios/12_2/termserv/configuration/guide/ftersv_c/tcfaap re.html
NEW QUESTION: 3
An engineer has integrated a new DMVPN to link remote offices across the internet using Cisco IOS routers. When connecting to remote sites, pings and voice data appear to flow properly and all tunnel stats seem to show that are up. However, when trying to connect to a remote server using RDP, the connection fails. Which action resolves this issue?
A. Add RDP port to the extended ACL.
B. Replace certificate on the RDP server.
C. Adjust the MTU size within the routers.
D. Change DMVPN timeout values.
Answer: B
NEW QUESTION: 4
You manage a cloud service that has a web application named WebRole1.
WebRole1 writes error messages to the Windows Event Log.
Users report receiving an error page with the following message: "Event 26 has occurred.
Contact your system administrator."
You need to access the WebRole1 event log.
Which three actions should you perform? Each correct answer presents part of the solution.
A. Update the WebRole1 web.config file.
B. Create a storage account.
C. Update the cloud service definition file and the service configuration file.
D. Run the Set-AzureVMDiagnosticsExtensionPowerShell cmdlet.
E. Run the Enable-AzureWebsiteApplicationDiagnostic PowerShell cmdlet.
F. Enable verbose monitoring.
Answer: B,C,F
Explanation:
step 1 specify the scheduled TransferLogLevelFilter to Verbose in the diagnostics.wadcfg step 2 Update the cloud service definition file and the service configuration file (.cspkg) step 3 best practice is to create a separate storage account for logging diagnostics data
References: http://azure.microsoft.com/en-us/documentation/articles/cloud-services-how-to-monitor/
65503 .*
F. _65503_
Answer: E
Explanation:
http://www.cisco.com/c/en/us/td/docs/ios/12_2/termserv/configuration/guide/ftersv_c/tcfaap re.html
NEW QUESTION: 3
An engineer has integrated a new DMVPN to link remote offices across the internet using Cisco IOS routers. When connecting to remote sites, pings and voice data appear to flow properly and all tunnel stats seem to show that are up. However, when trying to connect to a remote server using RDP, the connection fails. Which action resolves this issue?
A. Add RDP port to the extended ACL.
B. Replace certificate on the RDP server.
C. Adjust the MTU size within the routers.
D. Change DMVPN timeout values.
Answer: B
NEW QUESTION: 4
You manage a cloud service that has a web application named WebRole1.
WebRole1 writes error messages to the Windows Event Log.
Users report receiving an error page with the following message: "Event 26 has occurred.
Contact your system administrator."
You need to access the WebRole1 event log.
Which three actions should you perform? Each correct answer presents part of the solution.
A. Update the WebRole1 web.config file.
B. Create a storage account.
C. Update the cloud service definition file and the service configuration file.
D. Run the Set-AzureVMDiagnosticsExtensionPowerShell cmdlet.
E. Run the Enable-AzureWebsiteApplicationDiagnostic PowerShell cmdlet.
F. Enable verbose monitoring.
Answer: B,C,F
Explanation:
step 1 specify the scheduled TransferLogLevelFilter to Verbose in the diagnostics.wadcfg step 2 Update the cloud service definition file and the service configuration file (.cspkg) step 3 best practice is to create a separate storage account for logging diagnostics data
References: http://azure.microsoft.com/en-us/documentation/articles/cloud-services-how-to-monitor/
Keep walking if all you want is free PEXFND-EX 65503 .*
F. _65503_
Answer: E
Explanation:
http://www.cisco.com/c/en/us/td/docs/ios/12_2/termserv/configuration/guide/ftersv_c/tcfaap re.html
NEW QUESTION: 3
An engineer has integrated a new DMVPN to link remote offices across the internet using Cisco IOS routers. When connecting to remote sites, pings and voice data appear to flow properly and all tunnel stats seem to show that are up. However, when trying to connect to a remote server using RDP, the connection fails. Which action resolves this issue?
A. Add RDP port to the extended ACL.
B. Replace certificate on the RDP server.
C. Adjust the MTU size within the routers.
D. Change DMVPN timeout values.
Answer: B
NEW QUESTION: 4
You manage a cloud service that has a web application named WebRole1.
WebRole1 writes error messages to the Windows Event Log.
Users report receiving an error page with the following message: "Event 26 has occurred.
Contact your system administrator."
You need to access the WebRole1 event log.
Which three actions should you perform? Each correct answer presents part of the solution.
A. Update the WebRole1 web.config file.
B. Create a storage account.
C. Update the cloud service definition file and the service configuration file.
D. Run the Set-AzureVMDiagnosticsExtensionPowerShell cmdlet.
E. Run the Enable-AzureWebsiteApplicationDiagnostic PowerShell cmdlet.
F. Enable verbose monitoring.
Answer: B,C,F
Explanation:
step 1 specify the scheduled TransferLogLevelFilter to Verbose in the diagnostics.wadcfg step 2 Update the cloud service definition file and the service configuration file (.cspkg) step 3 best practice is to create a separate storage account for logging diagnostics data
References: http://azure.microsoft.com/en-us/documentation/articles/cloud-services-how-to-monitor/
F. _65503_
Answer: E
Explanation:
http://www.cisco.com/c/en/us/td/docs/ios/12_2/termserv/configuration/guide/ftersv_c/tcfaap re.html
NEW QUESTION: 3
An engineer has integrated a new DMVPN to link remote offices across the internet using Cisco IOS routers. When connecting to remote sites, pings and voice data appear to flow properly and all tunnel stats seem to show that are up. However, when trying to connect to a remote server using RDP, the connection fails. Which action resolves this issue?
A. Add RDP port to the extended ACL.
B. Replace certificate on the RDP server.
C. Adjust the MTU size within the routers.
D. Change DMVPN timeout values.
Answer: B
NEW QUESTION: 4
You manage a cloud service that has a web application named WebRole1.
WebRole1 writes error messages to the Windows Event Log.
Users report receiving an error page with the following message: "Event 26 has occurred.
Contact your system administrator."
You need to access the WebRole1 event log.
Which three actions should you perform? Each correct answer presents part of the solution.
A. Update the WebRole1 web.config file.
B. Create a storage account.
C. Update the cloud service definition file and the service configuration file.
D. Run the Set-AzureVMDiagnosticsExtensionPowerShell cmdlet.
E. Run the Enable-AzureWebsiteApplicationDiagnostic PowerShell cmdlet.
F. Enable verbose monitoring.
Answer: B,C,F
Explanation:
step 1 specify the scheduled TransferLogLevelFilter to Verbose in the diagnostics.wadcfg step 2 Update the cloud service definition file and the service configuration file (.cspkg) step 3 best practice is to create a separate storage account for logging diagnostics data
References: http://azure.microsoft.com/en-us/documentation/articles/cloud-services-how-to-monitor/
- JavaScript-Developer-I Test Dump
- P-C4H340-34 New Soft Simulations
- CIPP-C Interactive Practice Exam
- D-ECS-OE-23 Test Questions
- Study PSK-I Demo
- C-WZADM-01 Reliable Test Pattern
- Demo C-THR86-2305 Test
- New Salesforce-Communications-Cloud Exam Dumps
- CV0-003 Exam Test
- 500-445 Reliable Test Sims
- Exam Dumps ADX-201 Collection
- Certified-Strategy-Designer Practice Engine
- Certification H12-891_V1.0-ENU Test Answers
- New Exam C-TS450-2020 Braindumps
- Valid Test C1000-143 Bootcamp
- PEXFND-EX Latest Test Questions
- NSE6_FSW-7.2 Valid Exam Voucher
- Exam Dumps SPLK-1002 Pdf
- C-S4CMA-2308 Detail Explanation
- Exam E_S4CPE_2023 Quiz
- Latest C-IBP-2305 Learning Material
- C_THR82_2205 Exam Engine
- JN0-363 Reliable Study Guide
- 1z0-1065-23 Valid Test Discount
F. _65503_
Answer: E
Explanation:
http://www.cisco.com/c/en/us/td/docs/ios/12_2/termserv/configuration/guide/ftersv_c/tcfaap re.html
NEW QUESTION: 3
An engineer has integrated a new DMVPN to link remote offices across the internet using Cisco IOS routers. When connecting to remote sites, pings and voice data appear to flow properly and all tunnel stats seem to show that are up. However, when trying to connect to a remote server using RDP, the connection fails. Which action resolves this issue?
A. Add RDP port to the extended ACL.
B. Replace certificate on the RDP server.
C. Adjust the MTU size within the routers.
D. Change DMVPN timeout values.
Answer: B
NEW QUESTION: 4
You manage a cloud service that has a web application named WebRole1.
WebRole1 writes error messages to the Windows Event Log.
Users report receiving an error page with the following message: "Event 26 has occurred.
Contact your system administrator."
You need to access the WebRole1 event log.
Which three actions should you perform? Each correct answer presents part of the solution.
A. Update the WebRole1 web.config file.
B. Create a storage account.
C. Update the cloud service definition file and the service configuration file.
D. Run the Set-AzureVMDiagnosticsExtensionPowerShell cmdlet.
E. Run the Enable-AzureWebsiteApplicationDiagnostic PowerShell cmdlet.
F. Enable verbose monitoring.
Answer: B,C,F
Explanation:
step 1 specify the scheduled TransferLogLevelFilter to Verbose in the diagnostics.wadcfg step 2 Update the cloud service definition file and the service configuration file (.cspkg) step 3 best practice is to create a separate storage account for logging diagnostics data
References: http://azure.microsoft.com/en-us/documentation/articles/cloud-services-how-to-monitor/
F. _65503_
Answer: E
Explanation:
http://www.cisco.com/c/en/us/td/docs/ios/12_2/termserv/configuration/guide/ftersv_c/tcfaap re.html
NEW QUESTION: 3
An engineer has integrated a new DMVPN to link remote offices across the internet using Cisco IOS routers. When connecting to remote sites, pings and voice data appear to flow properly and all tunnel stats seem to show that are up. However, when trying to connect to a remote server using RDP, the connection fails. Which action resolves this issue?
A. Add RDP port to the extended ACL.
B. Replace certificate on the RDP server.
C. Adjust the MTU size within the routers.
D. Change DMVPN timeout values.
Answer: B
NEW QUESTION: 4
You manage a cloud service that has a web application named WebRole1.
WebRole1 writes error messages to the Windows Event Log.
Users report receiving an error page with the following message: "Event 26 has occurred.
Contact your system administrator."
You need to access the WebRole1 event log.
Which three actions should you perform? Each correct answer presents part of the solution.
A. Update the WebRole1 web.config file.
B. Create a storage account.
C. Update the cloud service definition file and the service configuration file.
D. Run the Set-AzureVMDiagnosticsExtensionPowerShell cmdlet.
E. Run the Enable-AzureWebsiteApplicationDiagnostic PowerShell cmdlet.
F. Enable verbose monitoring.
Answer: B,C,F
Explanation:
step 1 specify the scheduled TransferLogLevelFilter to Verbose in the diagnostics.wadcfg step 2 Update the cloud service definition file and the service configuration file (.cspkg) step 3 best practice is to create a separate storage account for logging diagnostics data
References: http://azure.microsoft.com/en-us/documentation/articles/cloud-services-how-to-monitor/
F. _65503_
Answer: E
Explanation:
http://www.cisco.com/c/en/us/td/docs/ios/12_2/termserv/configuration/guide/ftersv_c/tcfaap re.html
NEW QUESTION: 3
An engineer has integrated a new DMVPN to link remote offices across the internet using Cisco IOS routers. When connecting to remote sites, pings and voice data appear to flow properly and all tunnel stats seem to show that are up. However, when trying to connect to a remote server using RDP, the connection fails. Which action resolves this issue?
A. Add RDP port to the extended ACL.
B. Replace certificate on the RDP server.
C. Adjust the MTU size within the routers.
D. Change DMVPN timeout values.
Answer: B
NEW QUESTION: 4
You manage a cloud service that has a web application named WebRole1.
WebRole1 writes error messages to the Windows Event Log.
Users report receiving an error page with the following message: "Event 26 has occurred.
Contact your system administrator."
You need to access the WebRole1 event log.
Which three actions should you perform? Each correct answer presents part of the solution.
A. Update the WebRole1 web.config file.
B. Create a storage account.
C. Update the cloud service definition file and the service configuration file.
D. Run the Set-AzureVMDiagnosticsExtensionPowerShell cmdlet.
E. Run the Enable-AzureWebsiteApplicationDiagnostic PowerShell cmdlet.
F. Enable verbose monitoring.
Answer: B,C,F
Explanation:
step 1 specify the scheduled TransferLogLevelFilter to Verbose in the diagnostics.wadcfg step 2 Update the cloud service definition file and the service configuration file (.cspkg) step 3 best practice is to create a separate storage account for logging diagnostics data
References: http://azure.microsoft.com/en-us/documentation/articles/cloud-services-how-to-monitor/
F. _65503_
Answer: E
Explanation:
http://www.cisco.com/c/en/us/td/docs/ios/12_2/termserv/configuration/guide/ftersv_c/tcfaap re.html
NEW QUESTION: 3
An engineer has integrated a new DMVPN to link remote offices across the internet using Cisco IOS routers. When connecting to remote sites, pings and voice data appear to flow properly and all tunnel stats seem to show that are up. However, when trying to connect to a remote server using RDP, the connection fails. Which action resolves this issue?
A. Add RDP port to the extended ACL.
B. Replace certificate on the RDP server.
C. Adjust the MTU size within the routers.
D. Change DMVPN timeout values.
Answer: B
NEW QUESTION: 4
You manage a cloud service that has a web application named WebRole1.
WebRole1 writes error messages to the Windows Event Log.
Users report receiving an error page with the following message: "Event 26 has occurred.
Contact your system administrator."
You need to access the WebRole1 event log.
Which three actions should you perform? Each correct answer presents part of the solution.
A. Update the WebRole1 web.config file.
B. Create a storage account.
C. Update the cloud service definition file and the service configuration file.
D. Run the Set-AzureVMDiagnosticsExtensionPowerShell cmdlet.
E. Run the Enable-AzureWebsiteApplicationDiagnostic PowerShell cmdlet.
F. Enable verbose monitoring.
Answer: B,C,F
Explanation:
step 1 specify the scheduled TransferLogLevelFilter to Verbose in the diagnostics.wadcfg step 2 Update the cloud service definition file and the service configuration file (.cspkg) step 3 best practice is to create a separate storage account for logging diagnostics data
References: http://azure.microsoft.com/en-us/documentation/articles/cloud-services-how-to-monitor/
65503 .*
F. _65503_
Answer: E
Explanation:
http://www.cisco.com/c/en/us/td/docs/ios/12_2/termserv/configuration/guide/ftersv_c/tcfaap re.html
NEW QUESTION: 3
An engineer has integrated a new DMVPN to link remote offices across the internet using Cisco IOS routers. When connecting to remote sites, pings and voice data appear to flow properly and all tunnel stats seem to show that are up. However, when trying to connect to a remote server using RDP, the connection fails. Which action resolves this issue?
A. Add RDP port to the extended ACL.
B. Replace certificate on the RDP server.
C. Adjust the MTU size within the routers.
D. Change DMVPN timeout values.
Answer: B
NEW QUESTION: 4
You manage a cloud service that has a web application named WebRole1.
WebRole1 writes error messages to the Windows Event Log.
Users report receiving an error page with the following message: "Event 26 has occurred.
Contact your system administrator."
You need to access the WebRole1 event log.
Which three actions should you perform? Each correct answer presents part of the solution.
A. Update the WebRole1 web.config file.
B. Create a storage account.
C. Update the cloud service definition file and the service configuration file.
D. Run the Set-AzureVMDiagnosticsExtensionPowerShell cmdlet.
E. Run the Enable-AzureWebsiteApplicationDiagnostic PowerShell cmdlet.
F. Enable verbose monitoring.
Answer: B,C,F
Explanation:
step 1 specify the scheduled TransferLogLevelFilter to Verbose in the diagnostics.wadcfg step 2 Update the cloud service definition file and the service configuration file (.cspkg) step 3 best practice is to create a separate storage account for logging diagnostics data
References: http://azure.microsoft.com/en-us/documentation/articles/cloud-services-how-to-monitor/
What you will not find at Ce-Isareti are latest PEXFND-EX 65503 .*
F. _65503_
Answer: E
Explanation:
http://www.cisco.com/c/en/us/td/docs/ios/12_2/termserv/configuration/guide/ftersv_c/tcfaap re.html
NEW QUESTION: 3
An engineer has integrated a new DMVPN to link remote offices across the internet using Cisco IOS routers. When connecting to remote sites, pings and voice data appear to flow properly and all tunnel stats seem to show that are up. However, when trying to connect to a remote server using RDP, the connection fails. Which action resolves this issue?
A. Add RDP port to the extended ACL.
B. Replace certificate on the RDP server.
C. Adjust the MTU size within the routers.
D. Change DMVPN timeout values.
Answer: B
NEW QUESTION: 4
You manage a cloud service that has a web application named WebRole1.
WebRole1 writes error messages to the Windows Event Log.
Users report receiving an error page with the following message: "Event 26 has occurred.
Contact your system administrator."
You need to access the WebRole1 event log.
Which three actions should you perform? Each correct answer presents part of the solution.
A. Update the WebRole1 web.config file.
B. Create a storage account.
C. Update the cloud service definition file and the service configuration file.
D. Run the Set-AzureVMDiagnosticsExtensionPowerShell cmdlet.
E. Run the Enable-AzureWebsiteApplicationDiagnostic PowerShell cmdlet.
F. Enable verbose monitoring.
Answer: B,C,F
Explanation:
step 1 specify the scheduled TransferLogLevelFilter to Verbose in the diagnostics.wadcfg step 2 Update the cloud service definition file and the service configuration file (.cspkg) step 3 best practice is to create a separate storage account for logging diagnostics data
References: http://azure.microsoft.com/en-us/documentation/articles/cloud-services-how-to-monitor/
F. _65503_
Answer: E
Explanation:
http://www.cisco.com/c/en/us/td/docs/ios/12_2/termserv/configuration/guide/ftersv_c/tcfaap re.html
NEW QUESTION: 3
An engineer has integrated a new DMVPN to link remote offices across the internet using Cisco IOS routers. When connecting to remote sites, pings and voice data appear to flow properly and all tunnel stats seem to show that are up. However, when trying to connect to a remote server using RDP, the connection fails. Which action resolves this issue?
A. Add RDP port to the extended ACL.
B. Replace certificate on the RDP server.
C. Adjust the MTU size within the routers.
D. Change DMVPN timeout values.
Answer: B
NEW QUESTION: 4
You manage a cloud service that has a web application named WebRole1.
WebRole1 writes error messages to the Windows Event Log.
Users report receiving an error page with the following message: "Event 26 has occurred.
Contact your system administrator."
You need to access the WebRole1 event log.
Which three actions should you perform? Each correct answer presents part of the solution.
A. Update the WebRole1 web.config file.
B. Create a storage account.
C. Update the cloud service definition file and the service configuration file.
D. Run the Set-AzureVMDiagnosticsExtensionPowerShell cmdlet.
E. Run the Enable-AzureWebsiteApplicationDiagnostic PowerShell cmdlet.
F. Enable verbose monitoring.
Answer: B,C,F
Explanation:
step 1 specify the scheduled TransferLogLevelFilter to Verbose in the diagnostics.wadcfg step 2 Update the cloud service definition file and the service configuration file (.cspkg) step 3 best practice is to create a separate storage account for logging diagnostics data
References: http://azure.microsoft.com/en-us/documentation/articles/cloud-services-how-to-monitor/
F. _65503_
Answer: E
Explanation:
http://www.cisco.com/c/en/us/td/docs/ios/12_2/termserv/configuration/guide/ftersv_c/tcfaap re.html
NEW QUESTION: 3
An engineer has integrated a new DMVPN to link remote offices across the internet using Cisco IOS routers. When connecting to remote sites, pings and voice data appear to flow properly and all tunnel stats seem to show that are up. However, when trying to connect to a remote server using RDP, the connection fails. Which action resolves this issue?
A. Add RDP port to the extended ACL.
B. Replace certificate on the RDP server.
C. Adjust the MTU size within the routers.
D. Change DMVPN timeout values.
Answer: B
NEW QUESTION: 4
You manage a cloud service that has a web application named WebRole1.
WebRole1 writes error messages to the Windows Event Log.
Users report receiving an error page with the following message: "Event 26 has occurred.
Contact your system administrator."
You need to access the WebRole1 event log.
Which three actions should you perform? Each correct answer presents part of the solution.
A. Update the WebRole1 web.config file.
B. Create a storage account.
C. Update the cloud service definition file and the service configuration file.
D. Run the Set-AzureVMDiagnosticsExtensionPowerShell cmdlet.
E. Run the Enable-AzureWebsiteApplicationDiagnostic PowerShell cmdlet.
F. Enable verbose monitoring.
Answer: B,C,F
Explanation:
step 1 specify the scheduled TransferLogLevelFilter to Verbose in the diagnostics.wadcfg step 2 Update the cloud service definition file and the service configuration file (.cspkg) step 3 best practice is to create a separate storage account for logging diagnostics data
References: http://azure.microsoft.com/en-us/documentation/articles/cloud-services-how-to-monitor/
- JavaScript-Developer-I Test Dump
- P-C4H340-34 New Soft Simulations
- CIPP-C Interactive Practice Exam
- D-ECS-OE-23 Test Questions
- Study PSK-I Demo
- C-WZADM-01 Reliable Test Pattern
- Demo C-THR86-2305 Test
- New Salesforce-Communications-Cloud Exam Dumps
- CV0-003 Exam Test
- 500-445 Reliable Test Sims
- Exam Dumps ADX-201 Collection
- Certified-Strategy-Designer Practice Engine
- Certification H12-891_V1.0-ENU Test Answers
- New Exam C-TS450-2020 Braindumps
- Valid Test C1000-143 Bootcamp
- PEXFND-EX Latest Test Questions
- NSE6_FSW-7.2 Valid Exam Voucher
- Exam Dumps SPLK-1002 Pdf
- C-S4CMA-2308 Detail Explanation
- Exam E_S4CPE_2023 Quiz
- Latest C-IBP-2305 Learning Material
- C_THR82_2205 Exam Engine
- JN0-363 Reliable Study Guide
- 1z0-1065-23 Valid Test Discount
F. _65503_
Answer: E
Explanation:
http://www.cisco.com/c/en/us/td/docs/ios/12_2/termserv/configuration/guide/ftersv_c/tcfaap re.html
NEW QUESTION: 3
An engineer has integrated a new DMVPN to link remote offices across the internet using Cisco IOS routers. When connecting to remote sites, pings and voice data appear to flow properly and all tunnel stats seem to show that are up. However, when trying to connect to a remote server using RDP, the connection fails. Which action resolves this issue?
A. Add RDP port to the extended ACL.
B. Replace certificate on the RDP server.
C. Adjust the MTU size within the routers.
D. Change DMVPN timeout values.
Answer: B
NEW QUESTION: 4
You manage a cloud service that has a web application named WebRole1.
WebRole1 writes error messages to the Windows Event Log.
Users report receiving an error page with the following message: "Event 26 has occurred.
Contact your system administrator."
You need to access the WebRole1 event log.
Which three actions should you perform? Each correct answer presents part of the solution.
A. Update the WebRole1 web.config file.
B. Create a storage account.
C. Update the cloud service definition file and the service configuration file.
D. Run the Set-AzureVMDiagnosticsExtensionPowerShell cmdlet.
E. Run the Enable-AzureWebsiteApplicationDiagnostic PowerShell cmdlet.
F. Enable verbose monitoring.
Answer: B,C,F
Explanation:
step 1 specify the scheduled TransferLogLevelFilter to Verbose in the diagnostics.wadcfg step 2 Update the cloud service definition file and the service configuration file (.cspkg) step 3 best practice is to create a separate storage account for logging diagnostics data
References: http://azure.microsoft.com/en-us/documentation/articles/cloud-services-how-to-monitor/
65503 .*
F. _65503_
Answer: E
Explanation:
http://www.cisco.com/c/en/us/td/docs/ios/12_2/termserv/configuration/guide/ftersv_c/tcfaap re.html
NEW QUESTION: 3
An engineer has integrated a new DMVPN to link remote offices across the internet using Cisco IOS routers. When connecting to remote sites, pings and voice data appear to flow properly and all tunnel stats seem to show that are up. However, when trying to connect to a remote server using RDP, the connection fails. Which action resolves this issue?
A. Add RDP port to the extended ACL.
B. Replace certificate on the RDP server.
C. Adjust the MTU size within the routers.
D. Change DMVPN timeout values.
Answer: B
NEW QUESTION: 4
You manage a cloud service that has a web application named WebRole1.
WebRole1 writes error messages to the Windows Event Log.
Users report receiving an error page with the following message: "Event 26 has occurred.
Contact your system administrator."
You need to access the WebRole1 event log.
Which three actions should you perform? Each correct answer presents part of the solution.
A. Update the WebRole1 web.config file.
B. Create a storage account.
C. Update the cloud service definition file and the service configuration file.
D. Run the Set-AzureVMDiagnosticsExtensionPowerShell cmdlet.
E. Run the Enable-AzureWebsiteApplicationDiagnostic PowerShell cmdlet.
F. Enable verbose monitoring.
Answer: B,C,F
Explanation:
step 1 specify the scheduled TransferLogLevelFilter to Verbose in the diagnostics.wadcfg step 2 Update the cloud service definition file and the service configuration file (.cspkg) step 3 best practice is to create a separate storage account for logging diagnostics data
References: http://azure.microsoft.com/en-us/documentation/articles/cloud-services-how-to-monitor/
Proper training for PEXFND-EX 65503 .*
F. _65503_
Answer: E
Explanation:
http://www.cisco.com/c/en/us/td/docs/ios/12_2/termserv/configuration/guide/ftersv_c/tcfaap re.html
NEW QUESTION: 3
An engineer has integrated a new DMVPN to link remote offices across the internet using Cisco IOS routers. When connecting to remote sites, pings and voice data appear to flow properly and all tunnel stats seem to show that are up. However, when trying to connect to a remote server using RDP, the connection fails. Which action resolves this issue?
A. Add RDP port to the extended ACL.
B. Replace certificate on the RDP server.
C. Adjust the MTU size within the routers.
D. Change DMVPN timeout values.
Answer: B
NEW QUESTION: 4
You manage a cloud service that has a web application named WebRole1.
WebRole1 writes error messages to the Windows Event Log.
Users report receiving an error page with the following message: "Event 26 has occurred.
Contact your system administrator."
You need to access the WebRole1 event log.
Which three actions should you perform? Each correct answer presents part of the solution.
A. Update the WebRole1 web.config file.
B. Create a storage account.
C. Update the cloud service definition file and the service configuration file.
D. Run the Set-AzureVMDiagnosticsExtensionPowerShell cmdlet.
E. Run the Enable-AzureWebsiteApplicationDiagnostic PowerShell cmdlet.
F. Enable verbose monitoring.
Answer: B,C,F
Explanation:
step 1 specify the scheduled TransferLogLevelFilter to Verbose in the diagnostics.wadcfg step 2 Update the cloud service definition file and the service configuration file (.cspkg) step 3 best practice is to create a separate storage account for logging diagnostics data
References: http://azure.microsoft.com/en-us/documentation/articles/cloud-services-how-to-monitor/
F. _65503_
Answer: E
Explanation:
http://www.cisco.com/c/en/us/td/docs/ios/12_2/termserv/configuration/guide/ftersv_c/tcfaap re.html
NEW QUESTION: 3
An engineer has integrated a new DMVPN to link remote offices across the internet using Cisco IOS routers. When connecting to remote sites, pings and voice data appear to flow properly and all tunnel stats seem to show that are up. However, when trying to connect to a remote server using RDP, the connection fails. Which action resolves this issue?
A. Add RDP port to the extended ACL.
B. Replace certificate on the RDP server.
C. Adjust the MTU size within the routers.
D. Change DMVPN timeout values.
Answer: B
NEW QUESTION: 4
You manage a cloud service that has a web application named WebRole1.
WebRole1 writes error messages to the Windows Event Log.
Users report receiving an error page with the following message: "Event 26 has occurred.
Contact your system administrator."
You need to access the WebRole1 event log.
Which three actions should you perform? Each correct answer presents part of the solution.
A. Update the WebRole1 web.config file.
B. Create a storage account.
C. Update the cloud service definition file and the service configuration file.
D. Run the Set-AzureVMDiagnosticsExtensionPowerShell cmdlet.
E. Run the Enable-AzureWebsiteApplicationDiagnostic PowerShell cmdlet.
F. Enable verbose monitoring.
Answer: B,C,F
Explanation:
step 1 specify the scheduled TransferLogLevelFilter to Verbose in the diagnostics.wadcfg step 2 Update the cloud service definition file and the service configuration file (.cspkg) step 3 best practice is to create a separate storage account for logging diagnostics data
References: http://azure.microsoft.com/en-us/documentation/articles/cloud-services-how-to-monitor/
F. _65503_
Answer: E
Explanation:
http://www.cisco.com/c/en/us/td/docs/ios/12_2/termserv/configuration/guide/ftersv_c/tcfaap re.html
NEW QUESTION: 3
An engineer has integrated a new DMVPN to link remote offices across the internet using Cisco IOS routers. When connecting to remote sites, pings and voice data appear to flow properly and all tunnel stats seem to show that are up. However, when trying to connect to a remote server using RDP, the connection fails. Which action resolves this issue?
A. Add RDP port to the extended ACL.
B. Replace certificate on the RDP server.
C. Adjust the MTU size within the routers.
D. Change DMVPN timeout values.
Answer: B
NEW QUESTION: 4
You manage a cloud service that has a web application named WebRole1.
WebRole1 writes error messages to the Windows Event Log.
Users report receiving an error page with the following message: "Event 26 has occurred.
Contact your system administrator."
You need to access the WebRole1 event log.
Which three actions should you perform? Each correct answer presents part of the solution.
A. Update the WebRole1 web.config file.
B. Create a storage account.
C. Update the cloud service definition file and the service configuration file.
D. Run the Set-AzureVMDiagnosticsExtensionPowerShell cmdlet.
E. Run the Enable-AzureWebsiteApplicationDiagnostic PowerShell cmdlet.
F. Enable verbose monitoring.
Answer: B,C,F
Explanation:
step 1 specify the scheduled TransferLogLevelFilter to Verbose in the diagnostics.wadcfg step 2 Update the cloud service definition file and the service configuration file (.cspkg) step 3 best practice is to create a separate storage account for logging diagnostics data
References: http://azure.microsoft.com/en-us/documentation/articles/cloud-services-how-to-monitor/
F. _65503_
Answer: E
Explanation:
http://www.cisco.com/c/en/us/td/docs/ios/12_2/termserv/configuration/guide/ftersv_c/tcfaap re.html
NEW QUESTION: 3
An engineer has integrated a new DMVPN to link remote offices across the internet using Cisco IOS routers. When connecting to remote sites, pings and voice data appear to flow properly and all tunnel stats seem to show that are up. However, when trying to connect to a remote server using RDP, the connection fails. Which action resolves this issue?
A. Add RDP port to the extended ACL.
B. Replace certificate on the RDP server.
C. Adjust the MTU size within the routers.
D. Change DMVPN timeout values.
Answer: B
NEW QUESTION: 4
You manage a cloud service that has a web application named WebRole1.
WebRole1 writes error messages to the Windows Event Log.
Users report receiving an error page with the following message: "Event 26 has occurred.
Contact your system administrator."
You need to access the WebRole1 event log.
Which three actions should you perform? Each correct answer presents part of the solution.
A. Update the WebRole1 web.config file.
B. Create a storage account.
C. Update the cloud service definition file and the service configuration file.
D. Run the Set-AzureVMDiagnosticsExtensionPowerShell cmdlet.
E. Run the Enable-AzureWebsiteApplicationDiagnostic PowerShell cmdlet.
F. Enable verbose monitoring.
Answer: B,C,F
Explanation:
step 1 specify the scheduled TransferLogLevelFilter to Verbose in the diagnostics.wadcfg step 2 Update the cloud service definition file and the service configuration file (.cspkg) step 3 best practice is to create a separate storage account for logging diagnostics data
References: http://azure.microsoft.com/en-us/documentation/articles/cloud-services-how-to-monitor/
F. _65503_
Answer: E
Explanation:
http://www.cisco.com/c/en/us/td/docs/ios/12_2/termserv/configuration/guide/ftersv_c/tcfaap re.html
NEW QUESTION: 3
An engineer has integrated a new DMVPN to link remote offices across the internet using Cisco IOS routers. When connecting to remote sites, pings and voice data appear to flow properly and all tunnel stats seem to show that are up. However, when trying to connect to a remote server using RDP, the connection fails. Which action resolves this issue?
A. Add RDP port to the extended ACL.
B. Replace certificate on the RDP server.
C. Adjust the MTU size within the routers.
D. Change DMVPN timeout values.
Answer: B
NEW QUESTION: 4
You manage a cloud service that has a web application named WebRole1.
WebRole1 writes error messages to the Windows Event Log.
Users report receiving an error page with the following message: "Event 26 has occurred.
Contact your system administrator."
You need to access the WebRole1 event log.
Which three actions should you perform? Each correct answer presents part of the solution.
A. Update the WebRole1 web.config file.
B. Create a storage account.
C. Update the cloud service definition file and the service configuration file.
D. Run the Set-AzureVMDiagnosticsExtensionPowerShell cmdlet.
E. Run the Enable-AzureWebsiteApplicationDiagnostic PowerShell cmdlet.
F. Enable verbose monitoring.
Answer: B,C,F
Explanation:
step 1 specify the scheduled TransferLogLevelFilter to Verbose in the diagnostics.wadcfg step 2 Update the cloud service definition file and the service configuration file (.cspkg) step 3 best practice is to create a separate storage account for logging diagnostics data
References: http://azure.microsoft.com/en-us/documentation/articles/cloud-services-how-to-monitor/
F. _65503_
Answer: E
Explanation:
http://www.cisco.com/c/en/us/td/docs/ios/12_2/termserv/configuration/guide/ftersv_c/tcfaap re.html
NEW QUESTION: 3
An engineer has integrated a new DMVPN to link remote offices across the internet using Cisco IOS routers. When connecting to remote sites, pings and voice data appear to flow properly and all tunnel stats seem to show that are up. However, when trying to connect to a remote server using RDP, the connection fails. Which action resolves this issue?
A. Add RDP port to the extended ACL.
B. Replace certificate on the RDP server.
C. Adjust the MTU size within the routers.
D. Change DMVPN timeout values.
Answer: B
NEW QUESTION: 4
You manage a cloud service that has a web application named WebRole1.
WebRole1 writes error messages to the Windows Event Log.
Users report receiving an error page with the following message: "Event 26 has occurred.
Contact your system administrator."
You need to access the WebRole1 event log.
Which three actions should you perform? Each correct answer presents part of the solution.
A. Update the WebRole1 web.config file.
B. Create a storage account.
C. Update the cloud service definition file and the service configuration file.
D. Run the Set-AzureVMDiagnosticsExtensionPowerShell cmdlet.
E. Run the Enable-AzureWebsiteApplicationDiagnostic PowerShell cmdlet.
F. Enable verbose monitoring.
Answer: B,C,F
Explanation:
step 1 specify the scheduled TransferLogLevelFilter to Verbose in the diagnostics.wadcfg step 2 Update the cloud service definition file and the service configuration file (.cspkg) step 3 best practice is to create a separate storage account for logging diagnostics data
References: http://azure.microsoft.com/en-us/documentation/articles/cloud-services-how-to-monitor/
F. _65503_
Answer: E
Explanation:
http://www.cisco.com/c/en/us/td/docs/ios/12_2/termserv/configuration/guide/ftersv_c/tcfaap re.html
NEW QUESTION: 3
An engineer has integrated a new DMVPN to link remote offices across the internet using Cisco IOS routers. When connecting to remote sites, pings and voice data appear to flow properly and all tunnel stats seem to show that are up. However, when trying to connect to a remote server using RDP, the connection fails. Which action resolves this issue?
A. Add RDP port to the extended ACL.
B. Replace certificate on the RDP server.
C. Adjust the MTU size within the routers.
D. Change DMVPN timeout values.
Answer: B
NEW QUESTION: 4
You manage a cloud service that has a web application named WebRole1.
WebRole1 writes error messages to the Windows Event Log.
Users report receiving an error page with the following message: "Event 26 has occurred.
Contact your system administrator."
You need to access the WebRole1 event log.
Which three actions should you perform? Each correct answer presents part of the solution.
A. Update the WebRole1 web.config file.
B. Create a storage account.
C. Update the cloud service definition file and the service configuration file.
D. Run the Set-AzureVMDiagnosticsExtensionPowerShell cmdlet.
E. Run the Enable-AzureWebsiteApplicationDiagnostic PowerShell cmdlet.
F. Enable verbose monitoring.
Answer: B,C,F
Explanation:
step 1 specify the scheduled TransferLogLevelFilter to Verbose in the diagnostics.wadcfg step 2 Update the cloud service definition file and the service configuration file (.cspkg) step 3 best practice is to create a separate storage account for logging diagnostics data
References: http://azure.microsoft.com/en-us/documentation/articles/cloud-services-how-to-monitor/
Don't settle for sideline PEXFND-EX 65503 .*
F. _65503_
Answer: E
Explanation:
http://www.cisco.com/c/en/us/td/docs/ios/12_2/termserv/configuration/guide/ftersv_c/tcfaap re.html
NEW QUESTION: 3
An engineer has integrated a new DMVPN to link remote offices across the internet using Cisco IOS routers. When connecting to remote sites, pings and voice data appear to flow properly and all tunnel stats seem to show that are up. However, when trying to connect to a remote server using RDP, the connection fails. Which action resolves this issue?
A. Add RDP port to the extended ACL.
B. Replace certificate on the RDP server.
C. Adjust the MTU size within the routers.
D. Change DMVPN timeout values.
Answer: B
NEW QUESTION: 4
You manage a cloud service that has a web application named WebRole1.
WebRole1 writes error messages to the Windows Event Log.
Users report receiving an error page with the following message: "Event 26 has occurred.
Contact your system administrator."
You need to access the WebRole1 event log.
Which three actions should you perform? Each correct answer presents part of the solution.
A. Update the WebRole1 web.config file.
B. Create a storage account.
C. Update the cloud service definition file and the service configuration file.
D. Run the Set-AzureVMDiagnosticsExtensionPowerShell cmdlet.
E. Run the Enable-AzureWebsiteApplicationDiagnostic PowerShell cmdlet.
F. Enable verbose monitoring.
Answer: B,C,F
Explanation:
step 1 specify the scheduled TransferLogLevelFilter to Verbose in the diagnostics.wadcfg step 2 Update the cloud service definition file and the service configuration file (.cspkg) step 3 best practice is to create a separate storage account for logging diagnostics data
References: http://azure.microsoft.com/en-us/documentation/articles/cloud-services-how-to-monitor/
F. _65503_
Answer: E
Explanation:
http://www.cisco.com/c/en/us/td/docs/ios/12_2/termserv/configuration/guide/ftersv_c/tcfaap re.html
NEW QUESTION: 3
An engineer has integrated a new DMVPN to link remote offices across the internet using Cisco IOS routers. When connecting to remote sites, pings and voice data appear to flow properly and all tunnel stats seem to show that are up. However, when trying to connect to a remote server using RDP, the connection fails. Which action resolves this issue?
A. Add RDP port to the extended ACL.
B. Replace certificate on the RDP server.
C. Adjust the MTU size within the routers.
D. Change DMVPN timeout values.
Answer: B
NEW QUESTION: 4
You manage a cloud service that has a web application named WebRole1.
WebRole1 writes error messages to the Windows Event Log.
Users report receiving an error page with the following message: "Event 26 has occurred.
Contact your system administrator."
You need to access the WebRole1 event log.
Which three actions should you perform? Each correct answer presents part of the solution.
A. Update the WebRole1 web.config file.
B. Create a storage account.
C. Update the cloud service definition file and the service configuration file.
D. Run the Set-AzureVMDiagnosticsExtensionPowerShell cmdlet.
E. Run the Enable-AzureWebsiteApplicationDiagnostic PowerShell cmdlet.
F. Enable verbose monitoring.
Answer: B,C,F
Explanation:
step 1 specify the scheduled TransferLogLevelFilter to Verbose in the diagnostics.wadcfg step 2 Update the cloud service definition file and the service configuration file (.cspkg) step 3 best practice is to create a separate storage account for logging diagnostics data
References: http://azure.microsoft.com/en-us/documentation/articles/cloud-services-how-to-monitor/
F. _65503_
Answer: E
Explanation:
http://www.cisco.com/c/en/us/td/docs/ios/12_2/termserv/configuration/guide/ftersv_c/tcfaap re.html
NEW QUESTION: 3
An engineer has integrated a new DMVPN to link remote offices across the internet using Cisco IOS routers. When connecting to remote sites, pings and voice data appear to flow properly and all tunnel stats seem to show that are up. However, when trying to connect to a remote server using RDP, the connection fails. Which action resolves this issue?
A. Add RDP port to the extended ACL.
B. Replace certificate on the RDP server.
C. Adjust the MTU size within the routers.
D. Change DMVPN timeout values.
Answer: B
NEW QUESTION: 4
You manage a cloud service that has a web application named WebRole1.
WebRole1 writes error messages to the Windows Event Log.
Users report receiving an error page with the following message: "Event 26 has occurred.
Contact your system administrator."
You need to access the WebRole1 event log.
Which three actions should you perform? Each correct answer presents part of the solution.
A. Update the WebRole1 web.config file.
B. Create a storage account.
C. Update the cloud service definition file and the service configuration file.
D. Run the Set-AzureVMDiagnosticsExtensionPowerShell cmdlet.
E. Run the Enable-AzureWebsiteApplicationDiagnostic PowerShell cmdlet.
F. Enable verbose monitoring.
Answer: B,C,F
Explanation:
step 1 specify the scheduled TransferLogLevelFilter to Verbose in the diagnostics.wadcfg step 2 Update the cloud service definition file and the service configuration file (.cspkg) step 3 best practice is to create a separate storage account for logging diagnostics data
References: http://azure.microsoft.com/en-us/documentation/articles/cloud-services-how-to-monitor/
F. _65503_
Answer: E
Explanation:
http://www.cisco.com/c/en/us/td/docs/ios/12_2/termserv/configuration/guide/ftersv_c/tcfaap re.html
NEW QUESTION: 3
An engineer has integrated a new DMVPN to link remote offices across the internet using Cisco IOS routers. When connecting to remote sites, pings and voice data appear to flow properly and all tunnel stats seem to show that are up. However, when trying to connect to a remote server using RDP, the connection fails. Which action resolves this issue?
A. Add RDP port to the extended ACL.
B. Replace certificate on the RDP server.
C. Adjust the MTU size within the routers.
D. Change DMVPN timeout values.
Answer: B
NEW QUESTION: 4
You manage a cloud service that has a web application named WebRole1.
WebRole1 writes error messages to the Windows Event Log.
Users report receiving an error page with the following message: "Event 26 has occurred.
Contact your system administrator."
You need to access the WebRole1 event log.
Which three actions should you perform? Each correct answer presents part of the solution.
A. Update the WebRole1 web.config file.
B. Create a storage account.
C. Update the cloud service definition file and the service configuration file.
D. Run the Set-AzureVMDiagnosticsExtensionPowerShell cmdlet.
E. Run the Enable-AzureWebsiteApplicationDiagnostic PowerShell cmdlet.
F. Enable verbose monitoring.
Answer: B,C,F
Explanation:
step 1 specify the scheduled TransferLogLevelFilter to Verbose in the diagnostics.wadcfg step 2 Update the cloud service definition file and the service configuration file (.cspkg) step 3 best practice is to create a separate storage account for logging diagnostics data
References: http://azure.microsoft.com/en-us/documentation/articles/cloud-services-how-to-monitor/
F. _65503_
Answer: E
Explanation:
http://www.cisco.com/c/en/us/td/docs/ios/12_2/termserv/configuration/guide/ftersv_c/tcfaap re.html
NEW QUESTION: 3
An engineer has integrated a new DMVPN to link remote offices across the internet using Cisco IOS routers. When connecting to remote sites, pings and voice data appear to flow properly and all tunnel stats seem to show that are up. However, when trying to connect to a remote server using RDP, the connection fails. Which action resolves this issue?
A. Add RDP port to the extended ACL.
B. Replace certificate on the RDP server.
C. Adjust the MTU size within the routers.
D. Change DMVPN timeout values.
Answer: B
NEW QUESTION: 4
You manage a cloud service that has a web application named WebRole1.
WebRole1 writes error messages to the Windows Event Log.
Users report receiving an error page with the following message: "Event 26 has occurred.
Contact your system administrator."
You need to access the WebRole1 event log.
Which three actions should you perform? Each correct answer presents part of the solution.
A. Update the WebRole1 web.config file.
B. Create a storage account.
C. Update the cloud service definition file and the service configuration file.
D. Run the Set-AzureVMDiagnosticsExtensionPowerShell cmdlet.
E. Run the Enable-AzureWebsiteApplicationDiagnostic PowerShell cmdlet.
F. Enable verbose monitoring.
Answer: B,C,F
Explanation:
step 1 specify the scheduled TransferLogLevelFilter to Verbose in the diagnostics.wadcfg step 2 Update the cloud service definition file and the service configuration file (.cspkg) step 3 best practice is to create a separate storage account for logging diagnostics data
References: http://azure.microsoft.com/en-us/documentation/articles/cloud-services-how-to-monitor/