Passing the DY0-001 65503 .*
E. _65503_
F. _65503$
Answer: D
Explanation:
http://www.cisco.com/c/en/us/td/docs/ios/12_2/termserv/configuration/guide/ftersv_c/tcfaap re.html
NEW QUESTION: 3
An engineer has integrated a new DMVPN to link remote offices across the internet using Cisco IOS routers. When connecting to remote sites, pings and voice data appear to flow properly and all tunnel stats seem to show that are up. However, when trying to connect to a remote server using RDP, the connection fails. Which action resolves this issue?
A. Adjust the MTU size within the routers.
B. Replace certificate on the RDP server.
C. Add RDP port to the extended ACL.
D. Change DMVPN timeout values.
Answer: B
NEW QUESTION: 4
You manage a cloud service that has a web application named WebRole1.
WebRole1 writes error messages to the Windows Event Log.
Users report receiving an error page with the following message: "Event 26 has occurred.
Contact your system administrator."
You need to access the WebRole1 event log.
Which three actions should you perform? Each correct answer presents part of the solution.
A. Run the Enable-AzureWebsiteApplicationDiagnostic PowerShell cmdlet.
B. Update the WebRole1 web.config file.
C. Run the Set-AzureVMDiagnosticsExtensionPowerShell cmdlet.
D. Create a storage account.
E. Update the cloud service definition file and the service configuration file.
F. Enable verbose monitoring.
Answer: D,E,F
Explanation:
step 1 specify the scheduled TransferLogLevelFilter to Verbose in the diagnostics.wadcfg step 2 Update the cloud service definition file and the service configuration file (.cspkg) step 3 best practice is to create a separate storage account for logging diagnostics data
References: http://azure.microsoft.com/en-us/documentation/articles/cloud-services-how-to-monitor/
E. _65503_
F. _65503$
Answer: D
Explanation:
http://www.cisco.com/c/en/us/td/docs/ios/12_2/termserv/configuration/guide/ftersv_c/tcfaap re.html
NEW QUESTION: 3
An engineer has integrated a new DMVPN to link remote offices across the internet using Cisco IOS routers. When connecting to remote sites, pings and voice data appear to flow properly and all tunnel stats seem to show that are up. However, when trying to connect to a remote server using RDP, the connection fails. Which action resolves this issue?
A. Adjust the MTU size within the routers.
B. Replace certificate on the RDP server.
C. Add RDP port to the extended ACL.
D. Change DMVPN timeout values.
Answer: B
NEW QUESTION: 4
You manage a cloud service that has a web application named WebRole1.
WebRole1 writes error messages to the Windows Event Log.
Users report receiving an error page with the following message: "Event 26 has occurred.
Contact your system administrator."
You need to access the WebRole1 event log.
Which three actions should you perform? Each correct answer presents part of the solution.
A. Run the Enable-AzureWebsiteApplicationDiagnostic PowerShell cmdlet.
B. Update the WebRole1 web.config file.
C. Run the Set-AzureVMDiagnosticsExtensionPowerShell cmdlet.
D. Create a storage account.
E. Update the cloud service definition file and the service configuration file.
F. Enable verbose monitoring.
Answer: D,E,F
Explanation:
step 1 specify the scheduled TransferLogLevelFilter to Verbose in the diagnostics.wadcfg step 2 Update the cloud service definition file and the service configuration file (.cspkg) step 3 best practice is to create a separate storage account for logging diagnostics data
References: http://azure.microsoft.com/en-us/documentation/articles/cloud-services-how-to-monitor/
E. _65503_
F. _65503$
Answer: D
Explanation:
http://www.cisco.com/c/en/us/td/docs/ios/12_2/termserv/configuration/guide/ftersv_c/tcfaap re.html
NEW QUESTION: 3
An engineer has integrated a new DMVPN to link remote offices across the internet using Cisco IOS routers. When connecting to remote sites, pings and voice data appear to flow properly and all tunnel stats seem to show that are up. However, when trying to connect to a remote server using RDP, the connection fails. Which action resolves this issue?
A. Adjust the MTU size within the routers.
B. Replace certificate on the RDP server.
C. Add RDP port to the extended ACL.
D. Change DMVPN timeout values.
Answer: B
NEW QUESTION: 4
You manage a cloud service that has a web application named WebRole1.
WebRole1 writes error messages to the Windows Event Log.
Users report receiving an error page with the following message: "Event 26 has occurred.
Contact your system administrator."
You need to access the WebRole1 event log.
Which three actions should you perform? Each correct answer presents part of the solution.
A. Run the Enable-AzureWebsiteApplicationDiagnostic PowerShell cmdlet.
B. Update the WebRole1 web.config file.
C. Run the Set-AzureVMDiagnosticsExtensionPowerShell cmdlet.
D. Create a storage account.
E. Update the cloud service definition file and the service configuration file.
F. Enable verbose monitoring.
Answer: D,E,F
Explanation:
step 1 specify the scheduled TransferLogLevelFilter to Verbose in the diagnostics.wadcfg step 2 Update the cloud service definition file and the service configuration file (.cspkg) step 3 best practice is to create a separate storage account for logging diagnostics data
References: http://azure.microsoft.com/en-us/documentation/articles/cloud-services-how-to-monitor/
This is more than a DY0-001 65503 .*
E. _65503_
F. _65503$
Answer: D
Explanation:
http://www.cisco.com/c/en/us/td/docs/ios/12_2/termserv/configuration/guide/ftersv_c/tcfaap re.html
NEW QUESTION: 3
An engineer has integrated a new DMVPN to link remote offices across the internet using Cisco IOS routers. When connecting to remote sites, pings and voice data appear to flow properly and all tunnel stats seem to show that are up. However, when trying to connect to a remote server using RDP, the connection fails. Which action resolves this issue?
A. Adjust the MTU size within the routers.
B. Replace certificate on the RDP server.
C. Add RDP port to the extended ACL.
D. Change DMVPN timeout values.
Answer: B
NEW QUESTION: 4
You manage a cloud service that has a web application named WebRole1.
WebRole1 writes error messages to the Windows Event Log.
Users report receiving an error page with the following message: "Event 26 has occurred.
Contact your system administrator."
You need to access the WebRole1 event log.
Which three actions should you perform? Each correct answer presents part of the solution.
A. Run the Enable-AzureWebsiteApplicationDiagnostic PowerShell cmdlet.
B. Update the WebRole1 web.config file.
C. Run the Set-AzureVMDiagnosticsExtensionPowerShell cmdlet.
D. Create a storage account.
E. Update the cloud service definition file and the service configuration file.
F. Enable verbose monitoring.
Answer: D,E,F
Explanation:
step 1 specify the scheduled TransferLogLevelFilter to Verbose in the diagnostics.wadcfg step 2 Update the cloud service definition file and the service configuration file (.cspkg) step 3 best practice is to create a separate storage account for logging diagnostics data
References: http://azure.microsoft.com/en-us/documentation/articles/cloud-services-how-to-monitor/
- PL-300 New Soft Simulations
- AWS-Developer Interactive Practice Exam
- AIF-C01 Test Questions
- Study C1000-155 Demo
- MS-721 Reliable Test Pattern
- Demo N10-008 Test
- New SPLK-1003 Exam Dumps
- H19-301_V3.0 Exam Test
- DEA-1TT5 Reliable Test Sims
- Exam Dumps C-THR87-2211 Collection
- 2V0-12.24 Practice Engine
- Certification ADX-211 Test Answers
- New Exam HP2-I60 Braindumps
- Valid Test C_SAC_2415 Bootcamp
- 4A0-115 Latest Test Questions
- D-NWG-DS-00 Valid Exam Voucher
- Exam Dumps PCCET Pdf
- ISTQB-CTFL Detail Explanation
- Exam JN0-683 Quiz
- Latest C-TS414-2021 Learning Material
- D-PCR-DY-23 Exam Engine
- MB-700 Reliable Study Guide
- H21-311_V1.0 Valid Test Discount
E. _65503_
F. _65503$
Answer: D
Explanation:
http://www.cisco.com/c/en/us/td/docs/ios/12_2/termserv/configuration/guide/ftersv_c/tcfaap re.html
NEW QUESTION: 3
An engineer has integrated a new DMVPN to link remote offices across the internet using Cisco IOS routers. When connecting to remote sites, pings and voice data appear to flow properly and all tunnel stats seem to show that are up. However, when trying to connect to a remote server using RDP, the connection fails. Which action resolves this issue?
A. Adjust the MTU size within the routers.
B. Replace certificate on the RDP server.
C. Add RDP port to the extended ACL.
D. Change DMVPN timeout values.
Answer: B
NEW QUESTION: 4
You manage a cloud service that has a web application named WebRole1.
WebRole1 writes error messages to the Windows Event Log.
Users report receiving an error page with the following message: "Event 26 has occurred.
Contact your system administrator."
You need to access the WebRole1 event log.
Which three actions should you perform? Each correct answer presents part of the solution.
A. Run the Enable-AzureWebsiteApplicationDiagnostic PowerShell cmdlet.
B. Update the WebRole1 web.config file.
C. Run the Set-AzureVMDiagnosticsExtensionPowerShell cmdlet.
D. Create a storage account.
E. Update the cloud service definition file and the service configuration file.
F. Enable verbose monitoring.
Answer: D,E,F
Explanation:
step 1 specify the scheduled TransferLogLevelFilter to Verbose in the diagnostics.wadcfg step 2 Update the cloud service definition file and the service configuration file (.cspkg) step 3 best practice is to create a separate storage account for logging diagnostics data
References: http://azure.microsoft.com/en-us/documentation/articles/cloud-services-how-to-monitor/
E. _65503_
F. _65503$
Answer: D
Explanation:
http://www.cisco.com/c/en/us/td/docs/ios/12_2/termserv/configuration/guide/ftersv_c/tcfaap re.html
NEW QUESTION: 3
An engineer has integrated a new DMVPN to link remote offices across the internet using Cisco IOS routers. When connecting to remote sites, pings and voice data appear to flow properly and all tunnel stats seem to show that are up. However, when trying to connect to a remote server using RDP, the connection fails. Which action resolves this issue?
A. Adjust the MTU size within the routers.
B. Replace certificate on the RDP server.
C. Add RDP port to the extended ACL.
D. Change DMVPN timeout values.
Answer: B
NEW QUESTION: 4
You manage a cloud service that has a web application named WebRole1.
WebRole1 writes error messages to the Windows Event Log.
Users report receiving an error page with the following message: "Event 26 has occurred.
Contact your system administrator."
You need to access the WebRole1 event log.
Which three actions should you perform? Each correct answer presents part of the solution.
A. Run the Enable-AzureWebsiteApplicationDiagnostic PowerShell cmdlet.
B. Update the WebRole1 web.config file.
C. Run the Set-AzureVMDiagnosticsExtensionPowerShell cmdlet.
D. Create a storage account.
E. Update the cloud service definition file and the service configuration file.
F. Enable verbose monitoring.
Answer: D,E,F
Explanation:
step 1 specify the scheduled TransferLogLevelFilter to Verbose in the diagnostics.wadcfg step 2 Update the cloud service definition file and the service configuration file (.cspkg) step 3 best practice is to create a separate storage account for logging diagnostics data
References: http://azure.microsoft.com/en-us/documentation/articles/cloud-services-how-to-monitor/
CompTIA DY0-001 Latest Braindumps Questions It will only take you 1-2 days to finish the dumps VCE pdf and recite them before the exam, Our experts have distilled the crucial points of the exam into our DY0-001 training materials by integrating all useful content into them, CompTIA DY0-001 Latest Braindumps Questions Just try and you will love them, CompTIA DY0-001 Latest Braindumps Questions Well begun is half done.
Executives need to spend just a few days in the trenches with their technical Exam C-THR84-2405 Cram staff to get the true picture, Downloading and Installing Turbo Lister, When you're ready to get started, click one of those links.
Our DY0-001 certification training materials will be a good option for you, Touch to close the camera settings, The List Interface, In order to focus a depth map around Latest DY0-001 Braindumps Questions an appropriate area, you may choose to use spotlights instead of a directional light.
This may, in turn, increase the consumer appetite for complex products https://pass4sure.itexamdownload.com/DY0-001-valid-questions.html that have the above three elements, Then she cranked up the volume on the viewport and laughed as everyone's speakers screamed with feedback.
When teams are staffed with quality over quantity in mind, they CWISA-102 Valid Dumps Ebook can be both skilled and lean, Open the manifest.xml file, As a result, the program will continue when a null is encountered.
High Hit-Rate CompTIA - DY0-001 - CompTIA DataX Certification Exam Latest Braindumps Questions
Grounded, ground loop, One or more of the frames may contain a tiny, tiny scroll H20-422_V1.0 Reliable Test Cost bar at the top, It is difficult to get the attention of review sites because so many developers are requesting reviews, but you should still submit to them.
The Design Method will teach you a proven, repeatable process for Detailed TTA-19 Study Plan solving visual communication problems, It will only take you 1-2 days to finish the dumps VCE pdf and recite them before the exam.
Our experts have distilled the crucial points of the exam into our DY0-001 training materials by integrating all useful content into them, Just try and you will love them.
Well begun is half done, Besides, the DY0-001 free demo must be the best reference for your assessment, Just think that, you only need to spend some money, you can get a certificate as well as improve your ability.
It’s a critical question for you, Come and buy our DY0-001 exam materials, you will get more than you can imagine, The content of the DY0-001 training guide is the real questions and https://troytec.validtorrent.com/DY0-001-valid-exam-torrent.html answers which are always kept to be the latest according to the efforts of the professionals.
DY0-001 Latest Braindumps Questions | High Pass-Rate DY0-001 Reliable Test Cost: CompTIA DataX Certification Exam
However, with the help of the best training materials, you can completely pass CompTIA DY0-001 test in a short period of time, Especially those who study while working, you can save a lot of time easily.
Using Ce-Isareti can quickly help you get the Latest DY0-001 Braindumps Questions certificate you want, Every subtle change in the mainstream of the knowledge about the DY0-001 certification will be caught and we try our best to search the DY0-001 study materials resources available to us.
Passing DY0-001 can be hard, and you won’t find such exam DY0-001 brain dumps anywhere, We are professional and authoritative exam dumps seller in this field.
Our website is a professional certification dumps provider that offer candidates CompTIA DY0-001 valid vce and DY0-001 exam pdf for achieving success in an effective way in the DY0-001 valid exam.
NEW QUESTION: 1
Which three are advantages of the Java exception mechanism?
A. Improves the program structure because exceptions must be handled in the method in which they occurred
B. Allows the creation of new exceptions that are tailored to the particular program being created
C. Improves the program structure because the programmer can choose where to handle exceptions
D. Improves the program structure because the error handling code is separated from the normal program function
E. Provides a set of standard exceptions that covers all the possible errors
Answer: B,C,D
Explanation:
B is false. Standard exceptions not cover all possible errors. D is false. Exceptions don't have to be handled in the method in which they occurred.
NEW QUESTION: 2
Which as-path access-list regular expression should be applied on R2 as a neighbor filter list to only allow updates with an origin of AS 65503?
Refer to the exhibit.
A. 0
B. _65503.?$
C.
What will you get with your purchase of the Unlimited Access Package for only $149.00?
- An overview of the DY0-001 65503 .*
E. _65503_
F. _65503$
Answer: D
Explanation:
http://www.cisco.com/c/en/us/td/docs/ios/12_2/termserv/configuration/guide/ftersv_c/tcfaap re.htmlNEW QUESTION: 3
An engineer has integrated a new DMVPN to link remote offices across the internet using Cisco IOS routers. When connecting to remote sites, pings and voice data appear to flow properly and all tunnel stats seem to show that are up. However, when trying to connect to a remote server using RDP, the connection fails. Which action resolves this issue?
A. Adjust the MTU size within the routers.
B. Replace certificate on the RDP server.
C. Add RDP port to the extended ACL.
D. Change DMVPN timeout values.
Answer: BNEW QUESTION: 4
course through studying the questions and answers.
You manage a cloud service that has a web application named WebRole1.
WebRole1 writes error messages to the Windows Event Log.
Users report receiving an error page with the following message: "Event 26 has occurred.
Contact your system administrator."
You need to access the WebRole1 event log.
Which three actions should you perform? Each correct answer presents part of the solution.
A. Run the Enable-AzureWebsiteApplicationDiagnostic PowerShell cmdlet.
B. Update the WebRole1 web.config file.
C. Run the Set-AzureVMDiagnosticsExtensionPowerShell cmdlet.
D. Create a storage account.
E. Update the cloud service definition file and the service configuration file.
F. Enable verbose monitoring.
Answer: D,E,F
Explanation:
step 1 specify the scheduled TransferLogLevelFilter to Verbose in the diagnostics.wadcfg step 2 Update the cloud service definition file and the service configuration file (.cspkg) step 3 best practice is to create a separate storage account for logging diagnostics data
References: http://azure.microsoft.com/en-us/documentation/articles/cloud-services-how-to-monitor/ - A preview of actual DY0-001 65503 .*
E. _65503_
F. _65503$
Answer: D
Explanation:
http://www.cisco.com/c/en/us/td/docs/ios/12_2/termserv/configuration/guide/ftersv_c/tcfaap re.htmlNEW QUESTION: 3
An engineer has integrated a new DMVPN to link remote offices across the internet using Cisco IOS routers. When connecting to remote sites, pings and voice data appear to flow properly and all tunnel stats seem to show that are up. However, when trying to connect to a remote server using RDP, the connection fails. Which action resolves this issue?
A. Adjust the MTU size within the routers.
B. Replace certificate on the RDP server.
C. Add RDP port to the extended ACL.
D. Change DMVPN timeout values.
Answer: BNEW QUESTION: 4
test questions
You manage a cloud service that has a web application named WebRole1.
WebRole1 writes error messages to the Windows Event Log.
Users report receiving an error page with the following message: "Event 26 has occurred.
Contact your system administrator."
You need to access the WebRole1 event log.
Which three actions should you perform? Each correct answer presents part of the solution.
A. Run the Enable-AzureWebsiteApplicationDiagnostic PowerShell cmdlet.
B. Update the WebRole1 web.config file.
C. Run the Set-AzureVMDiagnosticsExtensionPowerShell cmdlet.
D. Create a storage account.
E. Update the cloud service definition file and the service configuration file.
F. Enable verbose monitoring.
Answer: D,E,F
Explanation:
step 1 specify the scheduled TransferLogLevelFilter to Verbose in the diagnostics.wadcfg step 2 Update the cloud service definition file and the service configuration file (.cspkg) step 3 best practice is to create a separate storage account for logging diagnostics data
References: http://azure.microsoft.com/en-us/documentation/articles/cloud-services-how-to-monitor/ - Actual correct DY0-001 65503 .*
E. _65503_
F. _65503$
Answer: D
Explanation:
http://www.cisco.com/c/en/us/td/docs/ios/12_2/termserv/configuration/guide/ftersv_c/tcfaap re.htmlNEW QUESTION: 3
An engineer has integrated a new DMVPN to link remote offices across the internet using Cisco IOS routers. When connecting to remote sites, pings and voice data appear to flow properly and all tunnel stats seem to show that are up. However, when trying to connect to a remote server using RDP, the connection fails. Which action resolves this issue?
A. Adjust the MTU size within the routers.
B. Replace certificate on the RDP server.
C. Add RDP port to the extended ACL.
D. Change DMVPN timeout values.
Answer: BNEW QUESTION: 4
answers to the latest 65503 .*
You manage a cloud service that has a web application named WebRole1.
WebRole1 writes error messages to the Windows Event Log.
Users report receiving an error page with the following message: "Event 26 has occurred.
Contact your system administrator."
You need to access the WebRole1 event log.
Which three actions should you perform? Each correct answer presents part of the solution.
A. Run the Enable-AzureWebsiteApplicationDiagnostic PowerShell cmdlet.
B. Update the WebRole1 web.config file.
C. Run the Set-AzureVMDiagnosticsExtensionPowerShell cmdlet.
D. Create a storage account.
E. Update the cloud service definition file and the service configuration file.
F. Enable verbose monitoring.
Answer: D,E,F
Explanation:
step 1 specify the scheduled TransferLogLevelFilter to Verbose in the diagnostics.wadcfg step 2 Update the cloud service definition file and the service configuration file (.cspkg) step 3 best practice is to create a separate storage account for logging diagnostics data
References: http://azure.microsoft.com/en-us/documentation/articles/cloud-services-how-to-monitor/
E. _65503_
F. _65503$
Answer: D
Explanation:
http://www.cisco.com/c/en/us/td/docs/ios/12_2/termserv/configuration/guide/ftersv_c/tcfaap re.htmlNEW QUESTION: 3
An engineer has integrated a new DMVPN to link remote offices across the internet using Cisco IOS routers. When connecting to remote sites, pings and voice data appear to flow properly and all tunnel stats seem to show that are up. However, when trying to connect to a remote server using RDP, the connection fails. Which action resolves this issue?
A. Adjust the MTU size within the routers.
B. Replace certificate on the RDP server.
C. Add RDP port to the extended ACL.
D. Change DMVPN timeout values.
Answer: BNEW QUESTION: 4
questions
You manage a cloud service that has a web application named WebRole1.
WebRole1 writes error messages to the Windows Event Log.
Users report receiving an error page with the following message: "Event 26 has occurred.
Contact your system administrator."
You need to access the WebRole1 event log.
Which three actions should you perform? Each correct answer presents part of the solution.
A. Run the Enable-AzureWebsiteApplicationDiagnostic PowerShell cmdlet.
B. Update the WebRole1 web.config file.
C. Run the Set-AzureVMDiagnosticsExtensionPowerShell cmdlet.
D. Create a storage account.
E. Update the cloud service definition file and the service configuration file.
F. Enable verbose monitoring.
Answer: D,E,F
Explanation:
step 1 specify the scheduled TransferLogLevelFilter to Verbose in the diagnostics.wadcfg step 2 Update the cloud service definition file and the service configuration file (.cspkg) step 3 best practice is to create a separate storage account for logging diagnostics data
References: http://azure.microsoft.com/en-us/documentation/articles/cloud-services-how-to-monitor/
Our Unlimited Access Package will prepare you for your exam with guaranteed results, surpassing other DY0-001 65503 .*
E. _65503_
F. _65503$
Answer: D
Explanation:
http://www.cisco.com/c/en/us/td/docs/ios/12_2/termserv/configuration/guide/ftersv_c/tcfaap re.html
NEW QUESTION: 3
An engineer has integrated a new DMVPN to link remote offices across the internet using Cisco IOS routers. When connecting to remote sites, pings and voice data appear to flow properly and all tunnel stats seem to show that are up. However, when trying to connect to a remote server using RDP, the connection fails. Which action resolves this issue?
A. Adjust the MTU size within the routers.
B. Replace certificate on the RDP server.
C. Add RDP port to the extended ACL.
D. Change DMVPN timeout values.
Answer: B
NEW QUESTION: 4
You manage a cloud service that has a web application named WebRole1.
WebRole1 writes error messages to the Windows Event Log.
Users report receiving an error page with the following message: "Event 26 has occurred.
Contact your system administrator."
You need to access the WebRole1 event log.
Which three actions should you perform? Each correct answer presents part of the solution.
A. Run the Enable-AzureWebsiteApplicationDiagnostic PowerShell cmdlet.
B. Update the WebRole1 web.config file.
C. Run the Set-AzureVMDiagnosticsExtensionPowerShell cmdlet.
D. Create a storage account.
E. Update the cloud service definition file and the service configuration file.
F. Enable verbose monitoring.
Answer: D,E,F
Explanation:
step 1 specify the scheduled TransferLogLevelFilter to Verbose in the diagnostics.wadcfg step 2 Update the cloud service definition file and the service configuration file (.cspkg) step 3 best practice is to create a separate storage account for logging diagnostics data
References: http://azure.microsoft.com/en-us/documentation/articles/cloud-services-how-to-monitor/
E. _65503_
F. _65503$
Answer: D
Explanation:
http://www.cisco.com/c/en/us/td/docs/ios/12_2/termserv/configuration/guide/ftersv_c/tcfaap re.html
NEW QUESTION: 3
An engineer has integrated a new DMVPN to link remote offices across the internet using Cisco IOS routers. When connecting to remote sites, pings and voice data appear to flow properly and all tunnel stats seem to show that are up. However, when trying to connect to a remote server using RDP, the connection fails. Which action resolves this issue?
A. Adjust the MTU size within the routers.
B. Replace certificate on the RDP server.
C. Add RDP port to the extended ACL.
D. Change DMVPN timeout values.
Answer: B
NEW QUESTION: 4
You manage a cloud service that has a web application named WebRole1.
WebRole1 writes error messages to the Windows Event Log.
Users report receiving an error page with the following message: "Event 26 has occurred.
Contact your system administrator."
You need to access the WebRole1 event log.
Which three actions should you perform? Each correct answer presents part of the solution.
A. Run the Enable-AzureWebsiteApplicationDiagnostic PowerShell cmdlet.
B. Update the WebRole1 web.config file.
C. Run the Set-AzureVMDiagnosticsExtensionPowerShell cmdlet.
D. Create a storage account.
E. Update the cloud service definition file and the service configuration file.
F. Enable verbose monitoring.
Answer: D,E,F
Explanation:
step 1 specify the scheduled TransferLogLevelFilter to Verbose in the diagnostics.wadcfg step 2 Update the cloud service definition file and the service configuration file (.cspkg) step 3 best practice is to create a separate storage account for logging diagnostics data
References: http://azure.microsoft.com/en-us/documentation/articles/cloud-services-how-to-monitor/
E. _65503_
F. _65503$
Answer: D
Explanation:
http://www.cisco.com/c/en/us/td/docs/ios/12_2/termserv/configuration/guide/ftersv_c/tcfaap re.html
NEW QUESTION: 3
An engineer has integrated a new DMVPN to link remote offices across the internet using Cisco IOS routers. When connecting to remote sites, pings and voice data appear to flow properly and all tunnel stats seem to show that are up. However, when trying to connect to a remote server using RDP, the connection fails. Which action resolves this issue?
A. Adjust the MTU size within the routers.
B. Replace certificate on the RDP server.
C. Add RDP port to the extended ACL.
D. Change DMVPN timeout values.
Answer: B
NEW QUESTION: 4
You manage a cloud service that has a web application named WebRole1.
WebRole1 writes error messages to the Windows Event Log.
Users report receiving an error page with the following message: "Event 26 has occurred.
Contact your system administrator."
You need to access the WebRole1 event log.
Which three actions should you perform? Each correct answer presents part of the solution.
A. Run the Enable-AzureWebsiteApplicationDiagnostic PowerShell cmdlet.
B. Update the WebRole1 web.config file.
C. Run the Set-AzureVMDiagnosticsExtensionPowerShell cmdlet.
D. Create a storage account.
E. Update the cloud service definition file and the service configuration file.
F. Enable verbose monitoring.
Answer: D,E,F
Explanation:
step 1 specify the scheduled TransferLogLevelFilter to Verbose in the diagnostics.wadcfg step 2 Update the cloud service definition file and the service configuration file (.cspkg) step 3 best practice is to create a separate storage account for logging diagnostics data
References: http://azure.microsoft.com/en-us/documentation/articles/cloud-services-how-to-monitor/
E. _65503_
F. _65503$
Answer: D
Explanation:
http://www.cisco.com/c/en/us/td/docs/ios/12_2/termserv/configuration/guide/ftersv_c/tcfaap re.html
NEW QUESTION: 3
An engineer has integrated a new DMVPN to link remote offices across the internet using Cisco IOS routers. When connecting to remote sites, pings and voice data appear to flow properly and all tunnel stats seem to show that are up. However, when trying to connect to a remote server using RDP, the connection fails. Which action resolves this issue?
A. Adjust the MTU size within the routers.
B. Replace certificate on the RDP server.
C. Add RDP port to the extended ACL.
D. Change DMVPN timeout values.
Answer: B
NEW QUESTION: 4
You manage a cloud service that has a web application named WebRole1.
WebRole1 writes error messages to the Windows Event Log.
Users report receiving an error page with the following message: "Event 26 has occurred.
Contact your system administrator."
You need to access the WebRole1 event log.
Which three actions should you perform? Each correct answer presents part of the solution.
A. Run the Enable-AzureWebsiteApplicationDiagnostic PowerShell cmdlet.
B. Update the WebRole1 web.config file.
C. Run the Set-AzureVMDiagnosticsExtensionPowerShell cmdlet.
D. Create a storage account.
E. Update the cloud service definition file and the service configuration file.
F. Enable verbose monitoring.
Answer: D,E,F
Explanation:
step 1 specify the scheduled TransferLogLevelFilter to Verbose in the diagnostics.wadcfg step 2 Update the cloud service definition file and the service configuration file (.cspkg) step 3 best practice is to create a separate storage account for logging diagnostics data
References: http://azure.microsoft.com/en-us/documentation/articles/cloud-services-how-to-monitor/
E. _65503_
F. _65503$
Answer: D
Explanation:
http://www.cisco.com/c/en/us/td/docs/ios/12_2/termserv/configuration/guide/ftersv_c/tcfaap re.html
NEW QUESTION: 3
An engineer has integrated a new DMVPN to link remote offices across the internet using Cisco IOS routers. When connecting to remote sites, pings and voice data appear to flow properly and all tunnel stats seem to show that are up. However, when trying to connect to a remote server using RDP, the connection fails. Which action resolves this issue?
A. Adjust the MTU size within the routers.
B. Replace certificate on the RDP server.
C. Add RDP port to the extended ACL.
D. Change DMVPN timeout values.
Answer: B
NEW QUESTION: 4
You manage a cloud service that has a web application named WebRole1.
WebRole1 writes error messages to the Windows Event Log.
Users report receiving an error page with the following message: "Event 26 has occurred.
Contact your system administrator."
You need to access the WebRole1 event log.
Which three actions should you perform? Each correct answer presents part of the solution.
A. Run the Enable-AzureWebsiteApplicationDiagnostic PowerShell cmdlet.
B. Update the WebRole1 web.config file.
C. Run the Set-AzureVMDiagnosticsExtensionPowerShell cmdlet.
D. Create a storage account.
E. Update the cloud service definition file and the service configuration file.
F. Enable verbose monitoring.
Answer: D,E,F
Explanation:
step 1 specify the scheduled TransferLogLevelFilter to Verbose in the diagnostics.wadcfg step 2 Update the cloud service definition file and the service configuration file (.cspkg) step 3 best practice is to create a separate storage account for logging diagnostics data
References: http://azure.microsoft.com/en-us/documentation/articles/cloud-services-how-to-monitor/
E. _65503_
F. _65503$
Answer: D
Explanation:
http://www.cisco.com/c/en/us/td/docs/ios/12_2/termserv/configuration/guide/ftersv_c/tcfaap re.html
NEW QUESTION: 3
An engineer has integrated a new DMVPN to link remote offices across the internet using Cisco IOS routers. When connecting to remote sites, pings and voice data appear to flow properly and all tunnel stats seem to show that are up. However, when trying to connect to a remote server using RDP, the connection fails. Which action resolves this issue?
A. Adjust the MTU size within the routers.
B. Replace certificate on the RDP server.
C. Add RDP port to the extended ACL.
D. Change DMVPN timeout values.
Answer: B
NEW QUESTION: 4
You manage a cloud service that has a web application named WebRole1.
WebRole1 writes error messages to the Windows Event Log.
Users report receiving an error page with the following message: "Event 26 has occurred.
Contact your system administrator."
You need to access the WebRole1 event log.
Which three actions should you perform? Each correct answer presents part of the solution.
A. Run the Enable-AzureWebsiteApplicationDiagnostic PowerShell cmdlet.
B. Update the WebRole1 web.config file.
C. Run the Set-AzureVMDiagnosticsExtensionPowerShell cmdlet.
D. Create a storage account.
E. Update the cloud service definition file and the service configuration file.
F. Enable verbose monitoring.
Answer: D,E,F
Explanation:
step 1 specify the scheduled TransferLogLevelFilter to Verbose in the diagnostics.wadcfg step 2 Update the cloud service definition file and the service configuration file (.cspkg) step 3 best practice is to create a separate storage account for logging diagnostics data
References: http://azure.microsoft.com/en-us/documentation/articles/cloud-services-how-to-monitor/
Skip all the worthless DY0-001 65503 .*
E. _65503_
F. _65503$
Answer: D
Explanation:
http://www.cisco.com/c/en/us/td/docs/ios/12_2/termserv/configuration/guide/ftersv_c/tcfaap re.html
NEW QUESTION: 3
An engineer has integrated a new DMVPN to link remote offices across the internet using Cisco IOS routers. When connecting to remote sites, pings and voice data appear to flow properly and all tunnel stats seem to show that are up. However, when trying to connect to a remote server using RDP, the connection fails. Which action resolves this issue?
A. Adjust the MTU size within the routers.
B. Replace certificate on the RDP server.
C. Add RDP port to the extended ACL.
D. Change DMVPN timeout values.
Answer: B
NEW QUESTION: 4
You manage a cloud service that has a web application named WebRole1.
WebRole1 writes error messages to the Windows Event Log.
Users report receiving an error page with the following message: "Event 26 has occurred.
Contact your system administrator."
You need to access the WebRole1 event log.
Which three actions should you perform? Each correct answer presents part of the solution.
A. Run the Enable-AzureWebsiteApplicationDiagnostic PowerShell cmdlet.
B. Update the WebRole1 web.config file.
C. Run the Set-AzureVMDiagnosticsExtensionPowerShell cmdlet.
D. Create a storage account.
E. Update the cloud service definition file and the service configuration file.
F. Enable verbose monitoring.
Answer: D,E,F
Explanation:
step 1 specify the scheduled TransferLogLevelFilter to Verbose in the diagnostics.wadcfg step 2 Update the cloud service definition file and the service configuration file (.cspkg) step 3 best practice is to create a separate storage account for logging diagnostics data
References: http://azure.microsoft.com/en-us/documentation/articles/cloud-services-how-to-monitor/
- PL-300 New Soft Simulations
- AWS-Developer Interactive Practice Exam
- AIF-C01 Test Questions
- Study C1000-155 Demo
- MS-721 Reliable Test Pattern
- Demo N10-008 Test
- New SPLK-1003 Exam Dumps
- H19-301_V3.0 Exam Test
- DEA-1TT5 Reliable Test Sims
- Exam Dumps C-THR87-2211 Collection
- 2V0-12.24 Practice Engine
- Certification ADX-211 Test Answers
- New Exam HP2-I60 Braindumps
- Valid Test C_SAC_2415 Bootcamp
- 4A0-115 Latest Test Questions
- D-NWG-DS-00 Valid Exam Voucher
- Exam Dumps PCCET Pdf
- ISTQB-CTFL Detail Explanation
- Exam JN0-683 Quiz
- Latest C-TS414-2021 Learning Material
- D-PCR-DY-23 Exam Engine
- MB-700 Reliable Study Guide
- H21-311_V1.0 Valid Test Discount
65503 .*
E. _65503_
F. _65503$
Answer: D
Explanation:
http://www.cisco.com/c/en/us/td/docs/ios/12_2/termserv/configuration/guide/ftersv_c/tcfaap re.html
NEW QUESTION: 3
An engineer has integrated a new DMVPN to link remote offices across the internet using Cisco IOS routers. When connecting to remote sites, pings and voice data appear to flow properly and all tunnel stats seem to show that are up. However, when trying to connect to a remote server using RDP, the connection fails. Which action resolves this issue?
A. Adjust the MTU size within the routers.
B. Replace certificate on the RDP server.
C. Add RDP port to the extended ACL.
D. Change DMVPN timeout values.
Answer: B
NEW QUESTION: 4
You manage a cloud service that has a web application named WebRole1.
WebRole1 writes error messages to the Windows Event Log.
Users report receiving an error page with the following message: "Event 26 has occurred.
Contact your system administrator."
You need to access the WebRole1 event log.
Which three actions should you perform? Each correct answer presents part of the solution.
A. Run the Enable-AzureWebsiteApplicationDiagnostic PowerShell cmdlet.
B. Update the WebRole1 web.config file.
C. Run the Set-AzureVMDiagnosticsExtensionPowerShell cmdlet.
D. Create a storage account.
E. Update the cloud service definition file and the service configuration file.
F. Enable verbose monitoring.
Answer: D,E,F
Explanation:
step 1 specify the scheduled TransferLogLevelFilter to Verbose in the diagnostics.wadcfg step 2 Update the cloud service definition file and the service configuration file (.cspkg) step 3 best practice is to create a separate storage account for logging diagnostics data
References: http://azure.microsoft.com/en-us/documentation/articles/cloud-services-how-to-monitor/
Difficulty finding the right DY0-001 65503 .*
E. _65503_
F. _65503$
Answer: D
Explanation:
http://www.cisco.com/c/en/us/td/docs/ios/12_2/termserv/configuration/guide/ftersv_c/tcfaap re.html
NEW QUESTION: 3
An engineer has integrated a new DMVPN to link remote offices across the internet using Cisco IOS routers. When connecting to remote sites, pings and voice data appear to flow properly and all tunnel stats seem to show that are up. However, when trying to connect to a remote server using RDP, the connection fails. Which action resolves this issue?
A. Adjust the MTU size within the routers.
B. Replace certificate on the RDP server.
C. Add RDP port to the extended ACL.
D. Change DMVPN timeout values.
Answer: B
NEW QUESTION: 4
You manage a cloud service that has a web application named WebRole1.
WebRole1 writes error messages to the Windows Event Log.
Users report receiving an error page with the following message: "Event 26 has occurred.
Contact your system administrator."
You need to access the WebRole1 event log.
Which three actions should you perform? Each correct answer presents part of the solution.
A. Run the Enable-AzureWebsiteApplicationDiagnostic PowerShell cmdlet.
B. Update the WebRole1 web.config file.
C. Run the Set-AzureVMDiagnosticsExtensionPowerShell cmdlet.
D. Create a storage account.
E. Update the cloud service definition file and the service configuration file.
F. Enable verbose monitoring.
Answer: D,E,F
Explanation:
step 1 specify the scheduled TransferLogLevelFilter to Verbose in the diagnostics.wadcfg step 2 Update the cloud service definition file and the service configuration file (.cspkg) step 3 best practice is to create a separate storage account for logging diagnostics data
References: http://azure.microsoft.com/en-us/documentation/articles/cloud-services-how-to-monitor/
E. _65503_
F. _65503$
Answer: D
Explanation:
http://www.cisco.com/c/en/us/td/docs/ios/12_2/termserv/configuration/guide/ftersv_c/tcfaap re.html
NEW QUESTION: 3
An engineer has integrated a new DMVPN to link remote offices across the internet using Cisco IOS routers. When connecting to remote sites, pings and voice data appear to flow properly and all tunnel stats seem to show that are up. However, when trying to connect to a remote server using RDP, the connection fails. Which action resolves this issue?
A. Adjust the MTU size within the routers.
B. Replace certificate on the RDP server.
C. Add RDP port to the extended ACL.
D. Change DMVPN timeout values.
Answer: B
NEW QUESTION: 4
You manage a cloud service that has a web application named WebRole1.
WebRole1 writes error messages to the Windows Event Log.
Users report receiving an error page with the following message: "Event 26 has occurred.
Contact your system administrator."
You need to access the WebRole1 event log.
Which three actions should you perform? Each correct answer presents part of the solution.
A. Run the Enable-AzureWebsiteApplicationDiagnostic PowerShell cmdlet.
B. Update the WebRole1 web.config file.
C. Run the Set-AzureVMDiagnosticsExtensionPowerShell cmdlet.
D. Create a storage account.
E. Update the cloud service definition file and the service configuration file.
F. Enable verbose monitoring.
Answer: D,E,F
Explanation:
step 1 specify the scheduled TransferLogLevelFilter to Verbose in the diagnostics.wadcfg step 2 Update the cloud service definition file and the service configuration file (.cspkg) step 3 best practice is to create a separate storage account for logging diagnostics data
References: http://azure.microsoft.com/en-us/documentation/articles/cloud-services-how-to-monitor/
E. _65503_
F. _65503$
Answer: D
Explanation:
http://www.cisco.com/c/en/us/td/docs/ios/12_2/termserv/configuration/guide/ftersv_c/tcfaap re.html
NEW QUESTION: 3
An engineer has integrated a new DMVPN to link remote offices across the internet using Cisco IOS routers. When connecting to remote sites, pings and voice data appear to flow properly and all tunnel stats seem to show that are up. However, when trying to connect to a remote server using RDP, the connection fails. Which action resolves this issue?
A. Adjust the MTU size within the routers.
B. Replace certificate on the RDP server.
C. Add RDP port to the extended ACL.
D. Change DMVPN timeout values.
Answer: B
NEW QUESTION: 4
You manage a cloud service that has a web application named WebRole1.
WebRole1 writes error messages to the Windows Event Log.
Users report receiving an error page with the following message: "Event 26 has occurred.
Contact your system administrator."
You need to access the WebRole1 event log.
Which three actions should you perform? Each correct answer presents part of the solution.
A. Run the Enable-AzureWebsiteApplicationDiagnostic PowerShell cmdlet.
B. Update the WebRole1 web.config file.
C. Run the Set-AzureVMDiagnosticsExtensionPowerShell cmdlet.
D. Create a storage account.
E. Update the cloud service definition file and the service configuration file.
F. Enable verbose monitoring.
Answer: D,E,F
Explanation:
step 1 specify the scheduled TransferLogLevelFilter to Verbose in the diagnostics.wadcfg step 2 Update the cloud service definition file and the service configuration file (.cspkg) step 3 best practice is to create a separate storage account for logging diagnostics data
References: http://azure.microsoft.com/en-us/documentation/articles/cloud-services-how-to-monitor/
E. _65503_
F. _65503$
Answer: D
Explanation:
http://www.cisco.com/c/en/us/td/docs/ios/12_2/termserv/configuration/guide/ftersv_c/tcfaap re.html
NEW QUESTION: 3
An engineer has integrated a new DMVPN to link remote offices across the internet using Cisco IOS routers. When connecting to remote sites, pings and voice data appear to flow properly and all tunnel stats seem to show that are up. However, when trying to connect to a remote server using RDP, the connection fails. Which action resolves this issue?
A. Adjust the MTU size within the routers.
B. Replace certificate on the RDP server.
C. Add RDP port to the extended ACL.
D. Change DMVPN timeout values.
Answer: B
NEW QUESTION: 4
You manage a cloud service that has a web application named WebRole1.
WebRole1 writes error messages to the Windows Event Log.
Users report receiving an error page with the following message: "Event 26 has occurred.
Contact your system administrator."
You need to access the WebRole1 event log.
Which three actions should you perform? Each correct answer presents part of the solution.
A. Run the Enable-AzureWebsiteApplicationDiagnostic PowerShell cmdlet.
B. Update the WebRole1 web.config file.
C. Run the Set-AzureVMDiagnosticsExtensionPowerShell cmdlet.
D. Create a storage account.
E. Update the cloud service definition file and the service configuration file.
F. Enable verbose monitoring.
Answer: D,E,F
Explanation:
step 1 specify the scheduled TransferLogLevelFilter to Verbose in the diagnostics.wadcfg step 2 Update the cloud service definition file and the service configuration file (.cspkg) step 3 best practice is to create a separate storage account for logging diagnostics data
References: http://azure.microsoft.com/en-us/documentation/articles/cloud-services-how-to-monitor/
- PL-300 New Soft Simulations
- AWS-Developer Interactive Practice Exam
- AIF-C01 Test Questions
- Study C1000-155 Demo
- MS-721 Reliable Test Pattern
- Demo N10-008 Test
- New SPLK-1003 Exam Dumps
- H19-301_V3.0 Exam Test
- DEA-1TT5 Reliable Test Sims
- Exam Dumps C-THR87-2211 Collection
- 2V0-12.24 Practice Engine
- Certification ADX-211 Test Answers
- New Exam HP2-I60 Braindumps
- Valid Test C_SAC_2415 Bootcamp
- 4A0-115 Latest Test Questions
- D-NWG-DS-00 Valid Exam Voucher
- Exam Dumps PCCET Pdf
- ISTQB-CTFL Detail Explanation
- Exam JN0-683 Quiz
- Latest C-TS414-2021 Learning Material
- D-PCR-DY-23 Exam Engine
- MB-700 Reliable Study Guide
- H21-311_V1.0 Valid Test Discount
E. _65503_
F. _65503$
Answer: D
Explanation:
http://www.cisco.com/c/en/us/td/docs/ios/12_2/termserv/configuration/guide/ftersv_c/tcfaap re.html
NEW QUESTION: 3
An engineer has integrated a new DMVPN to link remote offices across the internet using Cisco IOS routers. When connecting to remote sites, pings and voice data appear to flow properly and all tunnel stats seem to show that are up. However, when trying to connect to a remote server using RDP, the connection fails. Which action resolves this issue?
A. Adjust the MTU size within the routers.
B. Replace certificate on the RDP server.
C. Add RDP port to the extended ACL.
D. Change DMVPN timeout values.
Answer: B
NEW QUESTION: 4
You manage a cloud service that has a web application named WebRole1.
WebRole1 writes error messages to the Windows Event Log.
Users report receiving an error page with the following message: "Event 26 has occurred.
Contact your system administrator."
You need to access the WebRole1 event log.
Which three actions should you perform? Each correct answer presents part of the solution.
A. Run the Enable-AzureWebsiteApplicationDiagnostic PowerShell cmdlet.
B. Update the WebRole1 web.config file.
C. Run the Set-AzureVMDiagnosticsExtensionPowerShell cmdlet.
D. Create a storage account.
E. Update the cloud service definition file and the service configuration file.
F. Enable verbose monitoring.
Answer: D,E,F
Explanation:
step 1 specify the scheduled TransferLogLevelFilter to Verbose in the diagnostics.wadcfg step 2 Update the cloud service definition file and the service configuration file (.cspkg) step 3 best practice is to create a separate storage account for logging diagnostics data
References: http://azure.microsoft.com/en-us/documentation/articles/cloud-services-how-to-monitor/
- PL-300 New Soft Simulations
- AWS-Developer Interactive Practice Exam
- AIF-C01 Test Questions
- Study C1000-155 Demo
- MS-721 Reliable Test Pattern
- Demo N10-008 Test
- New SPLK-1003 Exam Dumps
- H19-301_V3.0 Exam Test
- DEA-1TT5 Reliable Test Sims
- Exam Dumps C-THR87-2211 Collection
- 2V0-12.24 Practice Engine
- Certification ADX-211 Test Answers
- New Exam HP2-I60 Braindumps
- Valid Test C_SAC_2415 Bootcamp
- 4A0-115 Latest Test Questions
- D-NWG-DS-00 Valid Exam Voucher
- Exam Dumps PCCET Pdf
- ISTQB-CTFL Detail Explanation
- Exam JN0-683 Quiz
- Latest C-TS414-2021 Learning Material
- D-PCR-DY-23 Exam Engine
- MB-700 Reliable Study Guide
- H21-311_V1.0 Valid Test Discount
E. _65503_
F. _65503$
Answer: D
Explanation:
http://www.cisco.com/c/en/us/td/docs/ios/12_2/termserv/configuration/guide/ftersv_c/tcfaap re.html
NEW QUESTION: 3
An engineer has integrated a new DMVPN to link remote offices across the internet using Cisco IOS routers. When connecting to remote sites, pings and voice data appear to flow properly and all tunnel stats seem to show that are up. However, when trying to connect to a remote server using RDP, the connection fails. Which action resolves this issue?
A. Adjust the MTU size within the routers.
B. Replace certificate on the RDP server.
C. Add RDP port to the extended ACL.
D. Change DMVPN timeout values.
Answer: B
NEW QUESTION: 4
You manage a cloud service that has a web application named WebRole1.
WebRole1 writes error messages to the Windows Event Log.
Users report receiving an error page with the following message: "Event 26 has occurred.
Contact your system administrator."
You need to access the WebRole1 event log.
Which three actions should you perform? Each correct answer presents part of the solution.
A. Run the Enable-AzureWebsiteApplicationDiagnostic PowerShell cmdlet.
B. Update the WebRole1 web.config file.
C. Run the Set-AzureVMDiagnosticsExtensionPowerShell cmdlet.
D. Create a storage account.
E. Update the cloud service definition file and the service configuration file.
F. Enable verbose monitoring.
Answer: D,E,F
Explanation:
step 1 specify the scheduled TransferLogLevelFilter to Verbose in the diagnostics.wadcfg step 2 Update the cloud service definition file and the service configuration file (.cspkg) step 3 best practice is to create a separate storage account for logging diagnostics data
References: http://azure.microsoft.com/en-us/documentation/articles/cloud-services-how-to-monitor/
E. _65503_
F. _65503$
Answer: D
Explanation:
http://www.cisco.com/c/en/us/td/docs/ios/12_2/termserv/configuration/guide/ftersv_c/tcfaap re.html
NEW QUESTION: 3
An engineer has integrated a new DMVPN to link remote offices across the internet using Cisco IOS routers. When connecting to remote sites, pings and voice data appear to flow properly and all tunnel stats seem to show that are up. However, when trying to connect to a remote server using RDP, the connection fails. Which action resolves this issue?
A. Adjust the MTU size within the routers.
B. Replace certificate on the RDP server.
C. Add RDP port to the extended ACL.
D. Change DMVPN timeout values.
Answer: B
NEW QUESTION: 4
You manage a cloud service that has a web application named WebRole1.
WebRole1 writes error messages to the Windows Event Log.
Users report receiving an error page with the following message: "Event 26 has occurred.
Contact your system administrator."
You need to access the WebRole1 event log.
Which three actions should you perform? Each correct answer presents part of the solution.
A. Run the Enable-AzureWebsiteApplicationDiagnostic PowerShell cmdlet.
B. Update the WebRole1 web.config file.
C. Run the Set-AzureVMDiagnosticsExtensionPowerShell cmdlet.
D. Create a storage account.
E. Update the cloud service definition file and the service configuration file.
F. Enable verbose monitoring.
Answer: D,E,F
Explanation:
step 1 specify the scheduled TransferLogLevelFilter to Verbose in the diagnostics.wadcfg step 2 Update the cloud service definition file and the service configuration file (.cspkg) step 3 best practice is to create a separate storage account for logging diagnostics data
References: http://azure.microsoft.com/en-us/documentation/articles/cloud-services-how-to-monitor/
E. _65503_
F. _65503$
Answer: D
Explanation:
http://www.cisco.com/c/en/us/td/docs/ios/12_2/termserv/configuration/guide/ftersv_c/tcfaap re.html
NEW QUESTION: 3
An engineer has integrated a new DMVPN to link remote offices across the internet using Cisco IOS routers. When connecting to remote sites, pings and voice data appear to flow properly and all tunnel stats seem to show that are up. However, when trying to connect to a remote server using RDP, the connection fails. Which action resolves this issue?
A. Adjust the MTU size within the routers.
B. Replace certificate on the RDP server.
C. Add RDP port to the extended ACL.
D. Change DMVPN timeout values.
Answer: B
NEW QUESTION: 4
You manage a cloud service that has a web application named WebRole1.
WebRole1 writes error messages to the Windows Event Log.
Users report receiving an error page with the following message: "Event 26 has occurred.
Contact your system administrator."
You need to access the WebRole1 event log.
Which three actions should you perform? Each correct answer presents part of the solution.
A. Run the Enable-AzureWebsiteApplicationDiagnostic PowerShell cmdlet.
B. Update the WebRole1 web.config file.
C. Run the Set-AzureVMDiagnosticsExtensionPowerShell cmdlet.
D. Create a storage account.
E. Update the cloud service definition file and the service configuration file.
F. Enable verbose monitoring.
Answer: D,E,F
Explanation:
step 1 specify the scheduled TransferLogLevelFilter to Verbose in the diagnostics.wadcfg step 2 Update the cloud service definition file and the service configuration file (.cspkg) step 3 best practice is to create a separate storage account for logging diagnostics data
References: http://azure.microsoft.com/en-us/documentation/articles/cloud-services-how-to-monitor/
65503 .*
E. _65503_
F. _65503$
Answer: D
Explanation:
http://www.cisco.com/c/en/us/td/docs/ios/12_2/termserv/configuration/guide/ftersv_c/tcfaap re.html
NEW QUESTION: 3
An engineer has integrated a new DMVPN to link remote offices across the internet using Cisco IOS routers. When connecting to remote sites, pings and voice data appear to flow properly and all tunnel stats seem to show that are up. However, when trying to connect to a remote server using RDP, the connection fails. Which action resolves this issue?
A. Adjust the MTU size within the routers.
B. Replace certificate on the RDP server.
C. Add RDP port to the extended ACL.
D. Change DMVPN timeout values.
Answer: B
NEW QUESTION: 4
You manage a cloud service that has a web application named WebRole1.
WebRole1 writes error messages to the Windows Event Log.
Users report receiving an error page with the following message: "Event 26 has occurred.
Contact your system administrator."
You need to access the WebRole1 event log.
Which three actions should you perform? Each correct answer presents part of the solution.
A. Run the Enable-AzureWebsiteApplicationDiagnostic PowerShell cmdlet.
B. Update the WebRole1 web.config file.
C. Run the Set-AzureVMDiagnosticsExtensionPowerShell cmdlet.
D. Create a storage account.
E. Update the cloud service definition file and the service configuration file.
F. Enable verbose monitoring.
Answer: D,E,F
Explanation:
step 1 specify the scheduled TransferLogLevelFilter to Verbose in the diagnostics.wadcfg step 2 Update the cloud service definition file and the service configuration file (.cspkg) step 3 best practice is to create a separate storage account for logging diagnostics data
References: http://azure.microsoft.com/en-us/documentation/articles/cloud-services-how-to-monitor/
Still searching for DY0-001 65503 .*
E. _65503_
F. _65503$
Answer: D
Explanation:
http://www.cisco.com/c/en/us/td/docs/ios/12_2/termserv/configuration/guide/ftersv_c/tcfaap re.html
NEW QUESTION: 3
An engineer has integrated a new DMVPN to link remote offices across the internet using Cisco IOS routers. When connecting to remote sites, pings and voice data appear to flow properly and all tunnel stats seem to show that are up. However, when trying to connect to a remote server using RDP, the connection fails. Which action resolves this issue?
A. Adjust the MTU size within the routers.
B. Replace certificate on the RDP server.
C. Add RDP port to the extended ACL.
D. Change DMVPN timeout values.
Answer: B
NEW QUESTION: 4
You manage a cloud service that has a web application named WebRole1.
WebRole1 writes error messages to the Windows Event Log.
Users report receiving an error page with the following message: "Event 26 has occurred.
Contact your system administrator."
You need to access the WebRole1 event log.
Which three actions should you perform? Each correct answer presents part of the solution.
A. Run the Enable-AzureWebsiteApplicationDiagnostic PowerShell cmdlet.
B. Update the WebRole1 web.config file.
C. Run the Set-AzureVMDiagnosticsExtensionPowerShell cmdlet.
D. Create a storage account.
E. Update the cloud service definition file and the service configuration file.
F. Enable verbose monitoring.
Answer: D,E,F
Explanation:
step 1 specify the scheduled TransferLogLevelFilter to Verbose in the diagnostics.wadcfg step 2 Update the cloud service definition file and the service configuration file (.cspkg) step 3 best practice is to create a separate storage account for logging diagnostics data
References: http://azure.microsoft.com/en-us/documentation/articles/cloud-services-how-to-monitor/
E. _65503_
F. _65503$
Answer: D
Explanation:
http://www.cisco.com/c/en/us/td/docs/ios/12_2/termserv/configuration/guide/ftersv_c/tcfaap re.html
NEW QUESTION: 3
An engineer has integrated a new DMVPN to link remote offices across the internet using Cisco IOS routers. When connecting to remote sites, pings and voice data appear to flow properly and all tunnel stats seem to show that are up. However, when trying to connect to a remote server using RDP, the connection fails. Which action resolves this issue?
A. Adjust the MTU size within the routers.
B. Replace certificate on the RDP server.
C. Add RDP port to the extended ACL.
D. Change DMVPN timeout values.
Answer: B
NEW QUESTION: 4
You manage a cloud service that has a web application named WebRole1.
WebRole1 writes error messages to the Windows Event Log.
Users report receiving an error page with the following message: "Event 26 has occurred.
Contact your system administrator."
You need to access the WebRole1 event log.
Which three actions should you perform? Each correct answer presents part of the solution.
A. Run the Enable-AzureWebsiteApplicationDiagnostic PowerShell cmdlet.
B. Update the WebRole1 web.config file.
C. Run the Set-AzureVMDiagnosticsExtensionPowerShell cmdlet.
D. Create a storage account.
E. Update the cloud service definition file and the service configuration file.
F. Enable verbose monitoring.
Answer: D,E,F
Explanation:
step 1 specify the scheduled TransferLogLevelFilter to Verbose in the diagnostics.wadcfg step 2 Update the cloud service definition file and the service configuration file (.cspkg) step 3 best practice is to create a separate storage account for logging diagnostics data
References: http://azure.microsoft.com/en-us/documentation/articles/cloud-services-how-to-monitor/
E. _65503_
F. _65503$
Answer: D
Explanation:
http://www.cisco.com/c/en/us/td/docs/ios/12_2/termserv/configuration/guide/ftersv_c/tcfaap re.html
NEW QUESTION: 3
An engineer has integrated a new DMVPN to link remote offices across the internet using Cisco IOS routers. When connecting to remote sites, pings and voice data appear to flow properly and all tunnel stats seem to show that are up. However, when trying to connect to a remote server using RDP, the connection fails. Which action resolves this issue?
A. Adjust the MTU size within the routers.
B. Replace certificate on the RDP server.
C. Add RDP port to the extended ACL.
D. Change DMVPN timeout values.
Answer: B
NEW QUESTION: 4
You manage a cloud service that has a web application named WebRole1.
WebRole1 writes error messages to the Windows Event Log.
Users report receiving an error page with the following message: "Event 26 has occurred.
Contact your system administrator."
You need to access the WebRole1 event log.
Which three actions should you perform? Each correct answer presents part of the solution.
A. Run the Enable-AzureWebsiteApplicationDiagnostic PowerShell cmdlet.
B. Update the WebRole1 web.config file.
C. Run the Set-AzureVMDiagnosticsExtensionPowerShell cmdlet.
D. Create a storage account.
E. Update the cloud service definition file and the service configuration file.
F. Enable verbose monitoring.
Answer: D,E,F
Explanation:
step 1 specify the scheduled TransferLogLevelFilter to Verbose in the diagnostics.wadcfg step 2 Update the cloud service definition file and the service configuration file (.cspkg) step 3 best practice is to create a separate storage account for logging diagnostics data
References: http://azure.microsoft.com/en-us/documentation/articles/cloud-services-how-to-monitor/
E. _65503_
F. _65503$
Answer: D
Explanation:
http://www.cisco.com/c/en/us/td/docs/ios/12_2/termserv/configuration/guide/ftersv_c/tcfaap re.html
NEW QUESTION: 3
An engineer has integrated a new DMVPN to link remote offices across the internet using Cisco IOS routers. When connecting to remote sites, pings and voice data appear to flow properly and all tunnel stats seem to show that are up. However, when trying to connect to a remote server using RDP, the connection fails. Which action resolves this issue?
A. Adjust the MTU size within the routers.
B. Replace certificate on the RDP server.
C. Add RDP port to the extended ACL.
D. Change DMVPN timeout values.
Answer: B
NEW QUESTION: 4
You manage a cloud service that has a web application named WebRole1.
WebRole1 writes error messages to the Windows Event Log.
Users report receiving an error page with the following message: "Event 26 has occurred.
Contact your system administrator."
You need to access the WebRole1 event log.
Which three actions should you perform? Each correct answer presents part of the solution.
A. Run the Enable-AzureWebsiteApplicationDiagnostic PowerShell cmdlet.
B. Update the WebRole1 web.config file.
C. Run the Set-AzureVMDiagnosticsExtensionPowerShell cmdlet.
D. Create a storage account.
E. Update the cloud service definition file and the service configuration file.
F. Enable verbose monitoring.
Answer: D,E,F
Explanation:
step 1 specify the scheduled TransferLogLevelFilter to Verbose in the diagnostics.wadcfg step 2 Update the cloud service definition file and the service configuration file (.cspkg) step 3 best practice is to create a separate storage account for logging diagnostics data
References: http://azure.microsoft.com/en-us/documentation/articles/cloud-services-how-to-monitor/
E. _65503_
F. _65503$
Answer: D
Explanation:
http://www.cisco.com/c/en/us/td/docs/ios/12_2/termserv/configuration/guide/ftersv_c/tcfaap re.html
NEW QUESTION: 3
An engineer has integrated a new DMVPN to link remote offices across the internet using Cisco IOS routers. When connecting to remote sites, pings and voice data appear to flow properly and all tunnel stats seem to show that are up. However, when trying to connect to a remote server using RDP, the connection fails. Which action resolves this issue?
A. Adjust the MTU size within the routers.
B. Replace certificate on the RDP server.
C. Add RDP port to the extended ACL.
D. Change DMVPN timeout values.
Answer: B
NEW QUESTION: 4
You manage a cloud service that has a web application named WebRole1.
WebRole1 writes error messages to the Windows Event Log.
Users report receiving an error page with the following message: "Event 26 has occurred.
Contact your system administrator."
You need to access the WebRole1 event log.
Which three actions should you perform? Each correct answer presents part of the solution.
A. Run the Enable-AzureWebsiteApplicationDiagnostic PowerShell cmdlet.
B. Update the WebRole1 web.config file.
C. Run the Set-AzureVMDiagnosticsExtensionPowerShell cmdlet.
D. Create a storage account.
E. Update the cloud service definition file and the service configuration file.
F. Enable verbose monitoring.
Answer: D,E,F
Explanation:
step 1 specify the scheduled TransferLogLevelFilter to Verbose in the diagnostics.wadcfg step 2 Update the cloud service definition file and the service configuration file (.cspkg) step 3 best practice is to create a separate storage account for logging diagnostics data
References: http://azure.microsoft.com/en-us/documentation/articles/cloud-services-how-to-monitor/
E. _65503_
F. _65503$
Answer: D
Explanation:
http://www.cisco.com/c/en/us/td/docs/ios/12_2/termserv/configuration/guide/ftersv_c/tcfaap re.html
NEW QUESTION: 3
An engineer has integrated a new DMVPN to link remote offices across the internet using Cisco IOS routers. When connecting to remote sites, pings and voice data appear to flow properly and all tunnel stats seem to show that are up. However, when trying to connect to a remote server using RDP, the connection fails. Which action resolves this issue?
A. Adjust the MTU size within the routers.
B. Replace certificate on the RDP server.
C. Add RDP port to the extended ACL.
D. Change DMVPN timeout values.
Answer: B
NEW QUESTION: 4
You manage a cloud service that has a web application named WebRole1.
WebRole1 writes error messages to the Windows Event Log.
Users report receiving an error page with the following message: "Event 26 has occurred.
Contact your system administrator."
You need to access the WebRole1 event log.
Which three actions should you perform? Each correct answer presents part of the solution.
A. Run the Enable-AzureWebsiteApplicationDiagnostic PowerShell cmdlet.
B. Update the WebRole1 web.config file.
C. Run the Set-AzureVMDiagnosticsExtensionPowerShell cmdlet.
D. Create a storage account.
E. Update the cloud service definition file and the service configuration file.
F. Enable verbose monitoring.
Answer: D,E,F
Explanation:
step 1 specify the scheduled TransferLogLevelFilter to Verbose in the diagnostics.wadcfg step 2 Update the cloud service definition file and the service configuration file (.cspkg) step 3 best practice is to create a separate storage account for logging diagnostics data
References: http://azure.microsoft.com/en-us/documentation/articles/cloud-services-how-to-monitor/
E. _65503_
F. _65503$
Answer: D
Explanation:
http://www.cisco.com/c/en/us/td/docs/ios/12_2/termserv/configuration/guide/ftersv_c/tcfaap re.html
NEW QUESTION: 3
An engineer has integrated a new DMVPN to link remote offices across the internet using Cisco IOS routers. When connecting to remote sites, pings and voice data appear to flow properly and all tunnel stats seem to show that are up. However, when trying to connect to a remote server using RDP, the connection fails. Which action resolves this issue?
A. Adjust the MTU size within the routers.
B. Replace certificate on the RDP server.
C. Add RDP port to the extended ACL.
D. Change DMVPN timeout values.
Answer: B
NEW QUESTION: 4
You manage a cloud service that has a web application named WebRole1.
WebRole1 writes error messages to the Windows Event Log.
Users report receiving an error page with the following message: "Event 26 has occurred.
Contact your system administrator."
You need to access the WebRole1 event log.
Which three actions should you perform? Each correct answer presents part of the solution.
A. Run the Enable-AzureWebsiteApplicationDiagnostic PowerShell cmdlet.
B. Update the WebRole1 web.config file.
C. Run the Set-AzureVMDiagnosticsExtensionPowerShell cmdlet.
D. Create a storage account.
E. Update the cloud service definition file and the service configuration file.
F. Enable verbose monitoring.
Answer: D,E,F
Explanation:
step 1 specify the scheduled TransferLogLevelFilter to Verbose in the diagnostics.wadcfg step 2 Update the cloud service definition file and the service configuration file (.cspkg) step 3 best practice is to create a separate storage account for logging diagnostics data
References: http://azure.microsoft.com/en-us/documentation/articles/cloud-services-how-to-monitor/
65503 .*
E. _65503_
F. _65503$
Answer: D
Explanation:
http://www.cisco.com/c/en/us/td/docs/ios/12_2/termserv/configuration/guide/ftersv_c/tcfaap re.html
NEW QUESTION: 3
An engineer has integrated a new DMVPN to link remote offices across the internet using Cisco IOS routers. When connecting to remote sites, pings and voice data appear to flow properly and all tunnel stats seem to show that are up. However, when trying to connect to a remote server using RDP, the connection fails. Which action resolves this issue?
A. Adjust the MTU size within the routers.
B. Replace certificate on the RDP server.
C. Add RDP port to the extended ACL.
D. Change DMVPN timeout values.
Answer: B
NEW QUESTION: 4
You manage a cloud service that has a web application named WebRole1.
WebRole1 writes error messages to the Windows Event Log.
Users report receiving an error page with the following message: "Event 26 has occurred.
Contact your system administrator."
You need to access the WebRole1 event log.
Which three actions should you perform? Each correct answer presents part of the solution.
A. Run the Enable-AzureWebsiteApplicationDiagnostic PowerShell cmdlet.
B. Update the WebRole1 web.config file.
C. Run the Set-AzureVMDiagnosticsExtensionPowerShell cmdlet.
D. Create a storage account.
E. Update the cloud service definition file and the service configuration file.
F. Enable verbose monitoring.
Answer: D,E,F
Explanation:
step 1 specify the scheduled TransferLogLevelFilter to Verbose in the diagnostics.wadcfg step 2 Update the cloud service definition file and the service configuration file (.cspkg) step 3 best practice is to create a separate storage account for logging diagnostics data
References: http://azure.microsoft.com/en-us/documentation/articles/cloud-services-how-to-monitor/
Keep walking if all you want is free DY0-001 65503 .*
E. _65503_
F. _65503$
Answer: D
Explanation:
http://www.cisco.com/c/en/us/td/docs/ios/12_2/termserv/configuration/guide/ftersv_c/tcfaap re.html
NEW QUESTION: 3
An engineer has integrated a new DMVPN to link remote offices across the internet using Cisco IOS routers. When connecting to remote sites, pings and voice data appear to flow properly and all tunnel stats seem to show that are up. However, when trying to connect to a remote server using RDP, the connection fails. Which action resolves this issue?
A. Adjust the MTU size within the routers.
B. Replace certificate on the RDP server.
C. Add RDP port to the extended ACL.
D. Change DMVPN timeout values.
Answer: B
NEW QUESTION: 4
You manage a cloud service that has a web application named WebRole1.
WebRole1 writes error messages to the Windows Event Log.
Users report receiving an error page with the following message: "Event 26 has occurred.
Contact your system administrator."
You need to access the WebRole1 event log.
Which three actions should you perform? Each correct answer presents part of the solution.
A. Run the Enable-AzureWebsiteApplicationDiagnostic PowerShell cmdlet.
B. Update the WebRole1 web.config file.
C. Run the Set-AzureVMDiagnosticsExtensionPowerShell cmdlet.
D. Create a storage account.
E. Update the cloud service definition file and the service configuration file.
F. Enable verbose monitoring.
Answer: D,E,F
Explanation:
step 1 specify the scheduled TransferLogLevelFilter to Verbose in the diagnostics.wadcfg step 2 Update the cloud service definition file and the service configuration file (.cspkg) step 3 best practice is to create a separate storage account for logging diagnostics data
References: http://azure.microsoft.com/en-us/documentation/articles/cloud-services-how-to-monitor/
E. _65503_
F. _65503$
Answer: D
Explanation:
http://www.cisco.com/c/en/us/td/docs/ios/12_2/termserv/configuration/guide/ftersv_c/tcfaap re.html
NEW QUESTION: 3
An engineer has integrated a new DMVPN to link remote offices across the internet using Cisco IOS routers. When connecting to remote sites, pings and voice data appear to flow properly and all tunnel stats seem to show that are up. However, when trying to connect to a remote server using RDP, the connection fails. Which action resolves this issue?
A. Adjust the MTU size within the routers.
B. Replace certificate on the RDP server.
C. Add RDP port to the extended ACL.
D. Change DMVPN timeout values.
Answer: B
NEW QUESTION: 4
You manage a cloud service that has a web application named WebRole1.
WebRole1 writes error messages to the Windows Event Log.
Users report receiving an error page with the following message: "Event 26 has occurred.
Contact your system administrator."
You need to access the WebRole1 event log.
Which three actions should you perform? Each correct answer presents part of the solution.
A. Run the Enable-AzureWebsiteApplicationDiagnostic PowerShell cmdlet.
B. Update the WebRole1 web.config file.
C. Run the Set-AzureVMDiagnosticsExtensionPowerShell cmdlet.
D. Create a storage account.
E. Update the cloud service definition file and the service configuration file.
F. Enable verbose monitoring.
Answer: D,E,F
Explanation:
step 1 specify the scheduled TransferLogLevelFilter to Verbose in the diagnostics.wadcfg step 2 Update the cloud service definition file and the service configuration file (.cspkg) step 3 best practice is to create a separate storage account for logging diagnostics data
References: http://azure.microsoft.com/en-us/documentation/articles/cloud-services-how-to-monitor/
- PL-300 New Soft Simulations
- AWS-Developer Interactive Practice Exam
- AIF-C01 Test Questions
- Study C1000-155 Demo
- MS-721 Reliable Test Pattern
- Demo N10-008 Test
- New SPLK-1003 Exam Dumps
- H19-301_V3.0 Exam Test
- DEA-1TT5 Reliable Test Sims
- Exam Dumps C-THR87-2211 Collection
- 2V0-12.24 Practice Engine
- Certification ADX-211 Test Answers
- New Exam HP2-I60 Braindumps
- Valid Test C_SAC_2415 Bootcamp
- 4A0-115 Latest Test Questions
- D-NWG-DS-00 Valid Exam Voucher
- Exam Dumps PCCET Pdf
- ISTQB-CTFL Detail Explanation
- Exam JN0-683 Quiz
- Latest C-TS414-2021 Learning Material
- D-PCR-DY-23 Exam Engine
- MB-700 Reliable Study Guide
- H21-311_V1.0 Valid Test Discount
E. _65503_
F. _65503$
Answer: D
Explanation:
http://www.cisco.com/c/en/us/td/docs/ios/12_2/termserv/configuration/guide/ftersv_c/tcfaap re.html
NEW QUESTION: 3
An engineer has integrated a new DMVPN to link remote offices across the internet using Cisco IOS routers. When connecting to remote sites, pings and voice data appear to flow properly and all tunnel stats seem to show that are up. However, when trying to connect to a remote server using RDP, the connection fails. Which action resolves this issue?
A. Adjust the MTU size within the routers.
B. Replace certificate on the RDP server.
C. Add RDP port to the extended ACL.
D. Change DMVPN timeout values.
Answer: B
NEW QUESTION: 4
You manage a cloud service that has a web application named WebRole1.
WebRole1 writes error messages to the Windows Event Log.
Users report receiving an error page with the following message: "Event 26 has occurred.
Contact your system administrator."
You need to access the WebRole1 event log.
Which three actions should you perform? Each correct answer presents part of the solution.
A. Run the Enable-AzureWebsiteApplicationDiagnostic PowerShell cmdlet.
B. Update the WebRole1 web.config file.
C. Run the Set-AzureVMDiagnosticsExtensionPowerShell cmdlet.
D. Create a storage account.
E. Update the cloud service definition file and the service configuration file.
F. Enable verbose monitoring.
Answer: D,E,F
Explanation:
step 1 specify the scheduled TransferLogLevelFilter to Verbose in the diagnostics.wadcfg step 2 Update the cloud service definition file and the service configuration file (.cspkg) step 3 best practice is to create a separate storage account for logging diagnostics data
References: http://azure.microsoft.com/en-us/documentation/articles/cloud-services-how-to-monitor/
E. _65503_
F. _65503$
Answer: D
Explanation:
http://www.cisco.com/c/en/us/td/docs/ios/12_2/termserv/configuration/guide/ftersv_c/tcfaap re.html
NEW QUESTION: 3
An engineer has integrated a new DMVPN to link remote offices across the internet using Cisco IOS routers. When connecting to remote sites, pings and voice data appear to flow properly and all tunnel stats seem to show that are up. However, when trying to connect to a remote server using RDP, the connection fails. Which action resolves this issue?
A. Adjust the MTU size within the routers.
B. Replace certificate on the RDP server.
C. Add RDP port to the extended ACL.
D. Change DMVPN timeout values.
Answer: B
NEW QUESTION: 4
You manage a cloud service that has a web application named WebRole1.
WebRole1 writes error messages to the Windows Event Log.
Users report receiving an error page with the following message: "Event 26 has occurred.
Contact your system administrator."
You need to access the WebRole1 event log.
Which three actions should you perform? Each correct answer presents part of the solution.
A. Run the Enable-AzureWebsiteApplicationDiagnostic PowerShell cmdlet.
B. Update the WebRole1 web.config file.
C. Run the Set-AzureVMDiagnosticsExtensionPowerShell cmdlet.
D. Create a storage account.
E. Update the cloud service definition file and the service configuration file.
F. Enable verbose monitoring.
Answer: D,E,F
Explanation:
step 1 specify the scheduled TransferLogLevelFilter to Verbose in the diagnostics.wadcfg step 2 Update the cloud service definition file and the service configuration file (.cspkg) step 3 best practice is to create a separate storage account for logging diagnostics data
References: http://azure.microsoft.com/en-us/documentation/articles/cloud-services-how-to-monitor/
E. _65503_
F. _65503$
Answer: D
Explanation:
http://www.cisco.com/c/en/us/td/docs/ios/12_2/termserv/configuration/guide/ftersv_c/tcfaap re.html
NEW QUESTION: 3
An engineer has integrated a new DMVPN to link remote offices across the internet using Cisco IOS routers. When connecting to remote sites, pings and voice data appear to flow properly and all tunnel stats seem to show that are up. However, when trying to connect to a remote server using RDP, the connection fails. Which action resolves this issue?
A. Adjust the MTU size within the routers.
B. Replace certificate on the RDP server.
C. Add RDP port to the extended ACL.
D. Change DMVPN timeout values.
Answer: B
NEW QUESTION: 4
You manage a cloud service that has a web application named WebRole1.
WebRole1 writes error messages to the Windows Event Log.
Users report receiving an error page with the following message: "Event 26 has occurred.
Contact your system administrator."
You need to access the WebRole1 event log.
Which three actions should you perform? Each correct answer presents part of the solution.
A. Run the Enable-AzureWebsiteApplicationDiagnostic PowerShell cmdlet.
B. Update the WebRole1 web.config file.
C. Run the Set-AzureVMDiagnosticsExtensionPowerShell cmdlet.
D. Create a storage account.
E. Update the cloud service definition file and the service configuration file.
F. Enable verbose monitoring.
Answer: D,E,F
Explanation:
step 1 specify the scheduled TransferLogLevelFilter to Verbose in the diagnostics.wadcfg step 2 Update the cloud service definition file and the service configuration file (.cspkg) step 3 best practice is to create a separate storage account for logging diagnostics data
References: http://azure.microsoft.com/en-us/documentation/articles/cloud-services-how-to-monitor/
E. _65503_
F. _65503$
Answer: D
Explanation:
http://www.cisco.com/c/en/us/td/docs/ios/12_2/termserv/configuration/guide/ftersv_c/tcfaap re.html
NEW QUESTION: 3
An engineer has integrated a new DMVPN to link remote offices across the internet using Cisco IOS routers. When connecting to remote sites, pings and voice data appear to flow properly and all tunnel stats seem to show that are up. However, when trying to connect to a remote server using RDP, the connection fails. Which action resolves this issue?
A. Adjust the MTU size within the routers.
B. Replace certificate on the RDP server.
C. Add RDP port to the extended ACL.
D. Change DMVPN timeout values.
Answer: B
NEW QUESTION: 4
You manage a cloud service that has a web application named WebRole1.
WebRole1 writes error messages to the Windows Event Log.
Users report receiving an error page with the following message: "Event 26 has occurred.
Contact your system administrator."
You need to access the WebRole1 event log.
Which three actions should you perform? Each correct answer presents part of the solution.
A. Run the Enable-AzureWebsiteApplicationDiagnostic PowerShell cmdlet.
B. Update the WebRole1 web.config file.
C. Run the Set-AzureVMDiagnosticsExtensionPowerShell cmdlet.
D. Create a storage account.
E. Update the cloud service definition file and the service configuration file.
F. Enable verbose monitoring.
Answer: D,E,F
Explanation:
step 1 specify the scheduled TransferLogLevelFilter to Verbose in the diagnostics.wadcfg step 2 Update the cloud service definition file and the service configuration file (.cspkg) step 3 best practice is to create a separate storage account for logging diagnostics data
References: http://azure.microsoft.com/en-us/documentation/articles/cloud-services-how-to-monitor/
65503 .*
E. _65503_
F. _65503$
Answer: D
Explanation:
http://www.cisco.com/c/en/us/td/docs/ios/12_2/termserv/configuration/guide/ftersv_c/tcfaap re.html
NEW QUESTION: 3
An engineer has integrated a new DMVPN to link remote offices across the internet using Cisco IOS routers. When connecting to remote sites, pings and voice data appear to flow properly and all tunnel stats seem to show that are up. However, when trying to connect to a remote server using RDP, the connection fails. Which action resolves this issue?
A. Adjust the MTU size within the routers.
B. Replace certificate on the RDP server.
C. Add RDP port to the extended ACL.
D. Change DMVPN timeout values.
Answer: B
NEW QUESTION: 4
You manage a cloud service that has a web application named WebRole1.
WebRole1 writes error messages to the Windows Event Log.
Users report receiving an error page with the following message: "Event 26 has occurred.
Contact your system administrator."
You need to access the WebRole1 event log.
Which three actions should you perform? Each correct answer presents part of the solution.
A. Run the Enable-AzureWebsiteApplicationDiagnostic PowerShell cmdlet.
B. Update the WebRole1 web.config file.
C. Run the Set-AzureVMDiagnosticsExtensionPowerShell cmdlet.
D. Create a storage account.
E. Update the cloud service definition file and the service configuration file.
F. Enable verbose monitoring.
Answer: D,E,F
Explanation:
step 1 specify the scheduled TransferLogLevelFilter to Verbose in the diagnostics.wadcfg step 2 Update the cloud service definition file and the service configuration file (.cspkg) step 3 best practice is to create a separate storage account for logging diagnostics data
References: http://azure.microsoft.com/en-us/documentation/articles/cloud-services-how-to-monitor/
What you will not find at Ce-Isareti are latest DY0-001 65503 .*
E. _65503_
F. _65503$
Answer: D
Explanation:
http://www.cisco.com/c/en/us/td/docs/ios/12_2/termserv/configuration/guide/ftersv_c/tcfaap re.html
NEW QUESTION: 3
An engineer has integrated a new DMVPN to link remote offices across the internet using Cisco IOS routers. When connecting to remote sites, pings and voice data appear to flow properly and all tunnel stats seem to show that are up. However, when trying to connect to a remote server using RDP, the connection fails. Which action resolves this issue?
A. Adjust the MTU size within the routers.
B. Replace certificate on the RDP server.
C. Add RDP port to the extended ACL.
D. Change DMVPN timeout values.
Answer: B
NEW QUESTION: 4
You manage a cloud service that has a web application named WebRole1.
WebRole1 writes error messages to the Windows Event Log.
Users report receiving an error page with the following message: "Event 26 has occurred.
Contact your system administrator."
You need to access the WebRole1 event log.
Which three actions should you perform? Each correct answer presents part of the solution.
A. Run the Enable-AzureWebsiteApplicationDiagnostic PowerShell cmdlet.
B. Update the WebRole1 web.config file.
C. Run the Set-AzureVMDiagnosticsExtensionPowerShell cmdlet.
D. Create a storage account.
E. Update the cloud service definition file and the service configuration file.
F. Enable verbose monitoring.
Answer: D,E,F
Explanation:
step 1 specify the scheduled TransferLogLevelFilter to Verbose in the diagnostics.wadcfg step 2 Update the cloud service definition file and the service configuration file (.cspkg) step 3 best practice is to create a separate storage account for logging diagnostics data
References: http://azure.microsoft.com/en-us/documentation/articles/cloud-services-how-to-monitor/
E. _65503_
F. _65503$
Answer: D
Explanation:
http://www.cisco.com/c/en/us/td/docs/ios/12_2/termserv/configuration/guide/ftersv_c/tcfaap re.html
NEW QUESTION: 3
An engineer has integrated a new DMVPN to link remote offices across the internet using Cisco IOS routers. When connecting to remote sites, pings and voice data appear to flow properly and all tunnel stats seem to show that are up. However, when trying to connect to a remote server using RDP, the connection fails. Which action resolves this issue?
A. Adjust the MTU size within the routers.
B. Replace certificate on the RDP server.
C. Add RDP port to the extended ACL.
D. Change DMVPN timeout values.
Answer: B
NEW QUESTION: 4
You manage a cloud service that has a web application named WebRole1.
WebRole1 writes error messages to the Windows Event Log.
Users report receiving an error page with the following message: "Event 26 has occurred.
Contact your system administrator."
You need to access the WebRole1 event log.
Which three actions should you perform? Each correct answer presents part of the solution.
A. Run the Enable-AzureWebsiteApplicationDiagnostic PowerShell cmdlet.
B. Update the WebRole1 web.config file.
C. Run the Set-AzureVMDiagnosticsExtensionPowerShell cmdlet.
D. Create a storage account.
E. Update the cloud service definition file and the service configuration file.
F. Enable verbose monitoring.
Answer: D,E,F
Explanation:
step 1 specify the scheduled TransferLogLevelFilter to Verbose in the diagnostics.wadcfg step 2 Update the cloud service definition file and the service configuration file (.cspkg) step 3 best practice is to create a separate storage account for logging diagnostics data
References: http://azure.microsoft.com/en-us/documentation/articles/cloud-services-how-to-monitor/
E. _65503_
F. _65503$
Answer: D
Explanation:
http://www.cisco.com/c/en/us/td/docs/ios/12_2/termserv/configuration/guide/ftersv_c/tcfaap re.html
NEW QUESTION: 3
An engineer has integrated a new DMVPN to link remote offices across the internet using Cisco IOS routers. When connecting to remote sites, pings and voice data appear to flow properly and all tunnel stats seem to show that are up. However, when trying to connect to a remote server using RDP, the connection fails. Which action resolves this issue?
A. Adjust the MTU size within the routers.
B. Replace certificate on the RDP server.
C. Add RDP port to the extended ACL.
D. Change DMVPN timeout values.
Answer: B
NEW QUESTION: 4
You manage a cloud service that has a web application named WebRole1.
WebRole1 writes error messages to the Windows Event Log.
Users report receiving an error page with the following message: "Event 26 has occurred.
Contact your system administrator."
You need to access the WebRole1 event log.
Which three actions should you perform? Each correct answer presents part of the solution.
A. Run the Enable-AzureWebsiteApplicationDiagnostic PowerShell cmdlet.
B. Update the WebRole1 web.config file.
C. Run the Set-AzureVMDiagnosticsExtensionPowerShell cmdlet.
D. Create a storage account.
E. Update the cloud service definition file and the service configuration file.
F. Enable verbose monitoring.
Answer: D,E,F
Explanation:
step 1 specify the scheduled TransferLogLevelFilter to Verbose in the diagnostics.wadcfg step 2 Update the cloud service definition file and the service configuration file (.cspkg) step 3 best practice is to create a separate storage account for logging diagnostics data
References: http://azure.microsoft.com/en-us/documentation/articles/cloud-services-how-to-monitor/
- PL-300 New Soft Simulations
- AWS-Developer Interactive Practice Exam
- AIF-C01 Test Questions
- Study C1000-155 Demo
- MS-721 Reliable Test Pattern
- Demo N10-008 Test
- New SPLK-1003 Exam Dumps
- H19-301_V3.0 Exam Test
- DEA-1TT5 Reliable Test Sims
- Exam Dumps C-THR87-2211 Collection
- 2V0-12.24 Practice Engine
- Certification ADX-211 Test Answers
- New Exam HP2-I60 Braindumps
- Valid Test C_SAC_2415 Bootcamp
- 4A0-115 Latest Test Questions
- D-NWG-DS-00 Valid Exam Voucher
- Exam Dumps PCCET Pdf
- ISTQB-CTFL Detail Explanation
- Exam JN0-683 Quiz
- Latest C-TS414-2021 Learning Material
- D-PCR-DY-23 Exam Engine
- MB-700 Reliable Study Guide
- H21-311_V1.0 Valid Test Discount
E. _65503_
F. _65503$
Answer: D
Explanation:
http://www.cisco.com/c/en/us/td/docs/ios/12_2/termserv/configuration/guide/ftersv_c/tcfaap re.html
NEW QUESTION: 3
An engineer has integrated a new DMVPN to link remote offices across the internet using Cisco IOS routers. When connecting to remote sites, pings and voice data appear to flow properly and all tunnel stats seem to show that are up. However, when trying to connect to a remote server using RDP, the connection fails. Which action resolves this issue?
A. Adjust the MTU size within the routers.
B. Replace certificate on the RDP server.
C. Add RDP port to the extended ACL.
D. Change DMVPN timeout values.
Answer: B
NEW QUESTION: 4
You manage a cloud service that has a web application named WebRole1.
WebRole1 writes error messages to the Windows Event Log.
Users report receiving an error page with the following message: "Event 26 has occurred.
Contact your system administrator."
You need to access the WebRole1 event log.
Which three actions should you perform? Each correct answer presents part of the solution.
A. Run the Enable-AzureWebsiteApplicationDiagnostic PowerShell cmdlet.
B. Update the WebRole1 web.config file.
C. Run the Set-AzureVMDiagnosticsExtensionPowerShell cmdlet.
D. Create a storage account.
E. Update the cloud service definition file and the service configuration file.
F. Enable verbose monitoring.
Answer: D,E,F
Explanation:
step 1 specify the scheduled TransferLogLevelFilter to Verbose in the diagnostics.wadcfg step 2 Update the cloud service definition file and the service configuration file (.cspkg) step 3 best practice is to create a separate storage account for logging diagnostics data
References: http://azure.microsoft.com/en-us/documentation/articles/cloud-services-how-to-monitor/
65503 .*
E. _65503_
F. _65503$
Answer: D
Explanation:
http://www.cisco.com/c/en/us/td/docs/ios/12_2/termserv/configuration/guide/ftersv_c/tcfaap re.html
NEW QUESTION: 3
An engineer has integrated a new DMVPN to link remote offices across the internet using Cisco IOS routers. When connecting to remote sites, pings and voice data appear to flow properly and all tunnel stats seem to show that are up. However, when trying to connect to a remote server using RDP, the connection fails. Which action resolves this issue?
A. Adjust the MTU size within the routers.
B. Replace certificate on the RDP server.
C. Add RDP port to the extended ACL.
D. Change DMVPN timeout values.
Answer: B
NEW QUESTION: 4
You manage a cloud service that has a web application named WebRole1.
WebRole1 writes error messages to the Windows Event Log.
Users report receiving an error page with the following message: "Event 26 has occurred.
Contact your system administrator."
You need to access the WebRole1 event log.
Which three actions should you perform? Each correct answer presents part of the solution.
A. Run the Enable-AzureWebsiteApplicationDiagnostic PowerShell cmdlet.
B. Update the WebRole1 web.config file.
C. Run the Set-AzureVMDiagnosticsExtensionPowerShell cmdlet.
D. Create a storage account.
E. Update the cloud service definition file and the service configuration file.
F. Enable verbose monitoring.
Answer: D,E,F
Explanation:
step 1 specify the scheduled TransferLogLevelFilter to Verbose in the diagnostics.wadcfg step 2 Update the cloud service definition file and the service configuration file (.cspkg) step 3 best practice is to create a separate storage account for logging diagnostics data
References: http://azure.microsoft.com/en-us/documentation/articles/cloud-services-how-to-monitor/
Proper training for DY0-001 65503 .*
E. _65503_
F. _65503$
Answer: D
Explanation:
http://www.cisco.com/c/en/us/td/docs/ios/12_2/termserv/configuration/guide/ftersv_c/tcfaap re.html
NEW QUESTION: 3
An engineer has integrated a new DMVPN to link remote offices across the internet using Cisco IOS routers. When connecting to remote sites, pings and voice data appear to flow properly and all tunnel stats seem to show that are up. However, when trying to connect to a remote server using RDP, the connection fails. Which action resolves this issue?
A. Adjust the MTU size within the routers.
B. Replace certificate on the RDP server.
C. Add RDP port to the extended ACL.
D. Change DMVPN timeout values.
Answer: B
NEW QUESTION: 4
You manage a cloud service that has a web application named WebRole1.
WebRole1 writes error messages to the Windows Event Log.
Users report receiving an error page with the following message: "Event 26 has occurred.
Contact your system administrator."
You need to access the WebRole1 event log.
Which three actions should you perform? Each correct answer presents part of the solution.
A. Run the Enable-AzureWebsiteApplicationDiagnostic PowerShell cmdlet.
B. Update the WebRole1 web.config file.
C. Run the Set-AzureVMDiagnosticsExtensionPowerShell cmdlet.
D. Create a storage account.
E. Update the cloud service definition file and the service configuration file.
F. Enable verbose monitoring.
Answer: D,E,F
Explanation:
step 1 specify the scheduled TransferLogLevelFilter to Verbose in the diagnostics.wadcfg step 2 Update the cloud service definition file and the service configuration file (.cspkg) step 3 best practice is to create a separate storage account for logging diagnostics data
References: http://azure.microsoft.com/en-us/documentation/articles/cloud-services-how-to-monitor/
E. _65503_
F. _65503$
Answer: D
Explanation:
http://www.cisco.com/c/en/us/td/docs/ios/12_2/termserv/configuration/guide/ftersv_c/tcfaap re.html
NEW QUESTION: 3
An engineer has integrated a new DMVPN to link remote offices across the internet using Cisco IOS routers. When connecting to remote sites, pings and voice data appear to flow properly and all tunnel stats seem to show that are up. However, when trying to connect to a remote server using RDP, the connection fails. Which action resolves this issue?
A. Adjust the MTU size within the routers.
B. Replace certificate on the RDP server.
C. Add RDP port to the extended ACL.
D. Change DMVPN timeout values.
Answer: B
NEW QUESTION: 4
You manage a cloud service that has a web application named WebRole1.
WebRole1 writes error messages to the Windows Event Log.
Users report receiving an error page with the following message: "Event 26 has occurred.
Contact your system administrator."
You need to access the WebRole1 event log.
Which three actions should you perform? Each correct answer presents part of the solution.
A. Run the Enable-AzureWebsiteApplicationDiagnostic PowerShell cmdlet.
B. Update the WebRole1 web.config file.
C. Run the Set-AzureVMDiagnosticsExtensionPowerShell cmdlet.
D. Create a storage account.
E. Update the cloud service definition file and the service configuration file.
F. Enable verbose monitoring.
Answer: D,E,F
Explanation:
step 1 specify the scheduled TransferLogLevelFilter to Verbose in the diagnostics.wadcfg step 2 Update the cloud service definition file and the service configuration file (.cspkg) step 3 best practice is to create a separate storage account for logging diagnostics data
References: http://azure.microsoft.com/en-us/documentation/articles/cloud-services-how-to-monitor/
E. _65503_
F. _65503$
Answer: D
Explanation:
http://www.cisco.com/c/en/us/td/docs/ios/12_2/termserv/configuration/guide/ftersv_c/tcfaap re.html
NEW QUESTION: 3
An engineer has integrated a new DMVPN to link remote offices across the internet using Cisco IOS routers. When connecting to remote sites, pings and voice data appear to flow properly and all tunnel stats seem to show that are up. However, when trying to connect to a remote server using RDP, the connection fails. Which action resolves this issue?
A. Adjust the MTU size within the routers.
B. Replace certificate on the RDP server.
C. Add RDP port to the extended ACL.
D. Change DMVPN timeout values.
Answer: B
NEW QUESTION: 4
You manage a cloud service that has a web application named WebRole1.
WebRole1 writes error messages to the Windows Event Log.
Users report receiving an error page with the following message: "Event 26 has occurred.
Contact your system administrator."
You need to access the WebRole1 event log.
Which three actions should you perform? Each correct answer presents part of the solution.
A. Run the Enable-AzureWebsiteApplicationDiagnostic PowerShell cmdlet.
B. Update the WebRole1 web.config file.
C. Run the Set-AzureVMDiagnosticsExtensionPowerShell cmdlet.
D. Create a storage account.
E. Update the cloud service definition file and the service configuration file.
F. Enable verbose monitoring.
Answer: D,E,F
Explanation:
step 1 specify the scheduled TransferLogLevelFilter to Verbose in the diagnostics.wadcfg step 2 Update the cloud service definition file and the service configuration file (.cspkg) step 3 best practice is to create a separate storage account for logging diagnostics data
References: http://azure.microsoft.com/en-us/documentation/articles/cloud-services-how-to-monitor/
E. _65503_
F. _65503$
Answer: D
Explanation:
http://www.cisco.com/c/en/us/td/docs/ios/12_2/termserv/configuration/guide/ftersv_c/tcfaap re.html
NEW QUESTION: 3
An engineer has integrated a new DMVPN to link remote offices across the internet using Cisco IOS routers. When connecting to remote sites, pings and voice data appear to flow properly and all tunnel stats seem to show that are up. However, when trying to connect to a remote server using RDP, the connection fails. Which action resolves this issue?
A. Adjust the MTU size within the routers.
B. Replace certificate on the RDP server.
C. Add RDP port to the extended ACL.
D. Change DMVPN timeout values.
Answer: B
NEW QUESTION: 4
You manage a cloud service that has a web application named WebRole1.
WebRole1 writes error messages to the Windows Event Log.
Users report receiving an error page with the following message: "Event 26 has occurred.
Contact your system administrator."
You need to access the WebRole1 event log.
Which three actions should you perform? Each correct answer presents part of the solution.
A. Run the Enable-AzureWebsiteApplicationDiagnostic PowerShell cmdlet.
B. Update the WebRole1 web.config file.
C. Run the Set-AzureVMDiagnosticsExtensionPowerShell cmdlet.
D. Create a storage account.
E. Update the cloud service definition file and the service configuration file.
F. Enable verbose monitoring.
Answer: D,E,F
Explanation:
step 1 specify the scheduled TransferLogLevelFilter to Verbose in the diagnostics.wadcfg step 2 Update the cloud service definition file and the service configuration file (.cspkg) step 3 best practice is to create a separate storage account for logging diagnostics data
References: http://azure.microsoft.com/en-us/documentation/articles/cloud-services-how-to-monitor/
E. _65503_
F. _65503$
Answer: D
Explanation:
http://www.cisco.com/c/en/us/td/docs/ios/12_2/termserv/configuration/guide/ftersv_c/tcfaap re.html
NEW QUESTION: 3
An engineer has integrated a new DMVPN to link remote offices across the internet using Cisco IOS routers. When connecting to remote sites, pings and voice data appear to flow properly and all tunnel stats seem to show that are up. However, when trying to connect to a remote server using RDP, the connection fails. Which action resolves this issue?
A. Adjust the MTU size within the routers.
B. Replace certificate on the RDP server.
C. Add RDP port to the extended ACL.
D. Change DMVPN timeout values.
Answer: B
NEW QUESTION: 4
You manage a cloud service that has a web application named WebRole1.
WebRole1 writes error messages to the Windows Event Log.
Users report receiving an error page with the following message: "Event 26 has occurred.
Contact your system administrator."
You need to access the WebRole1 event log.
Which three actions should you perform? Each correct answer presents part of the solution.
A. Run the Enable-AzureWebsiteApplicationDiagnostic PowerShell cmdlet.
B. Update the WebRole1 web.config file.
C. Run the Set-AzureVMDiagnosticsExtensionPowerShell cmdlet.
D. Create a storage account.
E. Update the cloud service definition file and the service configuration file.
F. Enable verbose monitoring.
Answer: D,E,F
Explanation:
step 1 specify the scheduled TransferLogLevelFilter to Verbose in the diagnostics.wadcfg step 2 Update the cloud service definition file and the service configuration file (.cspkg) step 3 best practice is to create a separate storage account for logging diagnostics data
References: http://azure.microsoft.com/en-us/documentation/articles/cloud-services-how-to-monitor/
E. _65503_
F. _65503$
Answer: D
Explanation:
http://www.cisco.com/c/en/us/td/docs/ios/12_2/termserv/configuration/guide/ftersv_c/tcfaap re.html
NEW QUESTION: 3
An engineer has integrated a new DMVPN to link remote offices across the internet using Cisco IOS routers. When connecting to remote sites, pings and voice data appear to flow properly and all tunnel stats seem to show that are up. However, when trying to connect to a remote server using RDP, the connection fails. Which action resolves this issue?
A. Adjust the MTU size within the routers.
B. Replace certificate on the RDP server.
C. Add RDP port to the extended ACL.
D. Change DMVPN timeout values.
Answer: B
NEW QUESTION: 4
You manage a cloud service that has a web application named WebRole1.
WebRole1 writes error messages to the Windows Event Log.
Users report receiving an error page with the following message: "Event 26 has occurred.
Contact your system administrator."
You need to access the WebRole1 event log.
Which three actions should you perform? Each correct answer presents part of the solution.
A. Run the Enable-AzureWebsiteApplicationDiagnostic PowerShell cmdlet.
B. Update the WebRole1 web.config file.
C. Run the Set-AzureVMDiagnosticsExtensionPowerShell cmdlet.
D. Create a storage account.
E. Update the cloud service definition file and the service configuration file.
F. Enable verbose monitoring.
Answer: D,E,F
Explanation:
step 1 specify the scheduled TransferLogLevelFilter to Verbose in the diagnostics.wadcfg step 2 Update the cloud service definition file and the service configuration file (.cspkg) step 3 best practice is to create a separate storage account for logging diagnostics data
References: http://azure.microsoft.com/en-us/documentation/articles/cloud-services-how-to-monitor/
E. _65503_
F. _65503$
Answer: D
Explanation:
http://www.cisco.com/c/en/us/td/docs/ios/12_2/termserv/configuration/guide/ftersv_c/tcfaap re.html
NEW QUESTION: 3
An engineer has integrated a new DMVPN to link remote offices across the internet using Cisco IOS routers. When connecting to remote sites, pings and voice data appear to flow properly and all tunnel stats seem to show that are up. However, when trying to connect to a remote server using RDP, the connection fails. Which action resolves this issue?
A. Adjust the MTU size within the routers.
B. Replace certificate on the RDP server.
C. Add RDP port to the extended ACL.
D. Change DMVPN timeout values.
Answer: B
NEW QUESTION: 4
You manage a cloud service that has a web application named WebRole1.
WebRole1 writes error messages to the Windows Event Log.
Users report receiving an error page with the following message: "Event 26 has occurred.
Contact your system administrator."
You need to access the WebRole1 event log.
Which three actions should you perform? Each correct answer presents part of the solution.
A. Run the Enable-AzureWebsiteApplicationDiagnostic PowerShell cmdlet.
B. Update the WebRole1 web.config file.
C. Run the Set-AzureVMDiagnosticsExtensionPowerShell cmdlet.
D. Create a storage account.
E. Update the cloud service definition file and the service configuration file.
F. Enable verbose monitoring.
Answer: D,E,F
Explanation:
step 1 specify the scheduled TransferLogLevelFilter to Verbose in the diagnostics.wadcfg step 2 Update the cloud service definition file and the service configuration file (.cspkg) step 3 best practice is to create a separate storage account for logging diagnostics data
References: http://azure.microsoft.com/en-us/documentation/articles/cloud-services-how-to-monitor/
Don't settle for sideline DY0-001 65503 .*
E. _65503_
F. _65503$
Answer: D
Explanation:
http://www.cisco.com/c/en/us/td/docs/ios/12_2/termserv/configuration/guide/ftersv_c/tcfaap re.html
NEW QUESTION: 3
An engineer has integrated a new DMVPN to link remote offices across the internet using Cisco IOS routers. When connecting to remote sites, pings and voice data appear to flow properly and all tunnel stats seem to show that are up. However, when trying to connect to a remote server using RDP, the connection fails. Which action resolves this issue?
A. Adjust the MTU size within the routers.
B. Replace certificate on the RDP server.
C. Add RDP port to the extended ACL.
D. Change DMVPN timeout values.
Answer: B
NEW QUESTION: 4
You manage a cloud service that has a web application named WebRole1.
WebRole1 writes error messages to the Windows Event Log.
Users report receiving an error page with the following message: "Event 26 has occurred.
Contact your system administrator."
You need to access the WebRole1 event log.
Which three actions should you perform? Each correct answer presents part of the solution.
A. Run the Enable-AzureWebsiteApplicationDiagnostic PowerShell cmdlet.
B. Update the WebRole1 web.config file.
C. Run the Set-AzureVMDiagnosticsExtensionPowerShell cmdlet.
D. Create a storage account.
E. Update the cloud service definition file and the service configuration file.
F. Enable verbose monitoring.
Answer: D,E,F
Explanation:
step 1 specify the scheduled TransferLogLevelFilter to Verbose in the diagnostics.wadcfg step 2 Update the cloud service definition file and the service configuration file (.cspkg) step 3 best practice is to create a separate storage account for logging diagnostics data
References: http://azure.microsoft.com/en-us/documentation/articles/cloud-services-how-to-monitor/
E. _65503_
F. _65503$
Answer: D
Explanation:
http://www.cisco.com/c/en/us/td/docs/ios/12_2/termserv/configuration/guide/ftersv_c/tcfaap re.html
NEW QUESTION: 3
An engineer has integrated a new DMVPN to link remote offices across the internet using Cisco IOS routers. When connecting to remote sites, pings and voice data appear to flow properly and all tunnel stats seem to show that are up. However, when trying to connect to a remote server using RDP, the connection fails. Which action resolves this issue?
A. Adjust the MTU size within the routers.
B. Replace certificate on the RDP server.
C. Add RDP port to the extended ACL.
D. Change DMVPN timeout values.
Answer: B
NEW QUESTION: 4
You manage a cloud service that has a web application named WebRole1.
WebRole1 writes error messages to the Windows Event Log.
Users report receiving an error page with the following message: "Event 26 has occurred.
Contact your system administrator."
You need to access the WebRole1 event log.
Which three actions should you perform? Each correct answer presents part of the solution.
A. Run the Enable-AzureWebsiteApplicationDiagnostic PowerShell cmdlet.
B. Update the WebRole1 web.config file.
C. Run the Set-AzureVMDiagnosticsExtensionPowerShell cmdlet.
D. Create a storage account.
E. Update the cloud service definition file and the service configuration file.
F. Enable verbose monitoring.
Answer: D,E,F
Explanation:
step 1 specify the scheduled TransferLogLevelFilter to Verbose in the diagnostics.wadcfg step 2 Update the cloud service definition file and the service configuration file (.cspkg) step 3 best practice is to create a separate storage account for logging diagnostics data
References: http://azure.microsoft.com/en-us/documentation/articles/cloud-services-how-to-monitor/
E. _65503_
F. _65503$
Answer: D
Explanation:
http://www.cisco.com/c/en/us/td/docs/ios/12_2/termserv/configuration/guide/ftersv_c/tcfaap re.html
NEW QUESTION: 3
An engineer has integrated a new DMVPN to link remote offices across the internet using Cisco IOS routers. When connecting to remote sites, pings and voice data appear to flow properly and all tunnel stats seem to show that are up. However, when trying to connect to a remote server using RDP, the connection fails. Which action resolves this issue?
A. Adjust the MTU size within the routers.
B. Replace certificate on the RDP server.
C. Add RDP port to the extended ACL.
D. Change DMVPN timeout values.
Answer: B
NEW QUESTION: 4
You manage a cloud service that has a web application named WebRole1.
WebRole1 writes error messages to the Windows Event Log.
Users report receiving an error page with the following message: "Event 26 has occurred.
Contact your system administrator."
You need to access the WebRole1 event log.
Which three actions should you perform? Each correct answer presents part of the solution.
A. Run the Enable-AzureWebsiteApplicationDiagnostic PowerShell cmdlet.
B. Update the WebRole1 web.config file.
C. Run the Set-AzureVMDiagnosticsExtensionPowerShell cmdlet.
D. Create a storage account.
E. Update the cloud service definition file and the service configuration file.
F. Enable verbose monitoring.
Answer: D,E,F
Explanation:
step 1 specify the scheduled TransferLogLevelFilter to Verbose in the diagnostics.wadcfg step 2 Update the cloud service definition file and the service configuration file (.cspkg) step 3 best practice is to create a separate storage account for logging diagnostics data
References: http://azure.microsoft.com/en-us/documentation/articles/cloud-services-how-to-monitor/
E. _65503_
F. _65503$
Answer: D
Explanation:
http://www.cisco.com/c/en/us/td/docs/ios/12_2/termserv/configuration/guide/ftersv_c/tcfaap re.html
NEW QUESTION: 3
An engineer has integrated a new DMVPN to link remote offices across the internet using Cisco IOS routers. When connecting to remote sites, pings and voice data appear to flow properly and all tunnel stats seem to show that are up. However, when trying to connect to a remote server using RDP, the connection fails. Which action resolves this issue?
A. Adjust the MTU size within the routers.
B. Replace certificate on the RDP server.
C. Add RDP port to the extended ACL.
D. Change DMVPN timeout values.
Answer: B
NEW QUESTION: 4
You manage a cloud service that has a web application named WebRole1.
WebRole1 writes error messages to the Windows Event Log.
Users report receiving an error page with the following message: "Event 26 has occurred.
Contact your system administrator."
You need to access the WebRole1 event log.
Which three actions should you perform? Each correct answer presents part of the solution.
A. Run the Enable-AzureWebsiteApplicationDiagnostic PowerShell cmdlet.
B. Update the WebRole1 web.config file.
C. Run the Set-AzureVMDiagnosticsExtensionPowerShell cmdlet.
D. Create a storage account.
E. Update the cloud service definition file and the service configuration file.
F. Enable verbose monitoring.
Answer: D,E,F
Explanation:
step 1 specify the scheduled TransferLogLevelFilter to Verbose in the diagnostics.wadcfg step 2 Update the cloud service definition file and the service configuration file (.cspkg) step 3 best practice is to create a separate storage account for logging diagnostics data
References: http://azure.microsoft.com/en-us/documentation/articles/cloud-services-how-to-monitor/
E. _65503_
F. _65503$
Answer: D
Explanation:
http://www.cisco.com/c/en/us/td/docs/ios/12_2/termserv/configuration/guide/ftersv_c/tcfaap re.html
NEW QUESTION: 3
An engineer has integrated a new DMVPN to link remote offices across the internet using Cisco IOS routers. When connecting to remote sites, pings and voice data appear to flow properly and all tunnel stats seem to show that are up. However, when trying to connect to a remote server using RDP, the connection fails. Which action resolves this issue?
A. Adjust the MTU size within the routers.
B. Replace certificate on the RDP server.
C. Add RDP port to the extended ACL.
D. Change DMVPN timeout values.
Answer: B
NEW QUESTION: 4
You manage a cloud service that has a web application named WebRole1.
WebRole1 writes error messages to the Windows Event Log.
Users report receiving an error page with the following message: "Event 26 has occurred.
Contact your system administrator."
You need to access the WebRole1 event log.
Which three actions should you perform? Each correct answer presents part of the solution.
A. Run the Enable-AzureWebsiteApplicationDiagnostic PowerShell cmdlet.
B. Update the WebRole1 web.config file.
C. Run the Set-AzureVMDiagnosticsExtensionPowerShell cmdlet.
D. Create a storage account.
E. Update the cloud service definition file and the service configuration file.
F. Enable verbose monitoring.
Answer: D,E,F
Explanation:
step 1 specify the scheduled TransferLogLevelFilter to Verbose in the diagnostics.wadcfg step 2 Update the cloud service definition file and the service configuration file (.cspkg) step 3 best practice is to create a separate storage account for logging diagnostics data
References: http://azure.microsoft.com/en-us/documentation/articles/cloud-services-how-to-monitor/