Passing the 1z0-1104-25 65503 .*
D. _65503$
E. _65503.?$
F. _65503_
Answer: C
Explanation:
http://www.cisco.com/c/en/us/td/docs/ios/12_2/termserv/configuration/guide/ftersv_c/tcfaap re.html
NEW QUESTION: 3
An engineer has integrated a new DMVPN to link remote offices across the internet using Cisco IOS routers. When connecting to remote sites, pings and voice data appear to flow properly and all tunnel stats seem to show that are up. However, when trying to connect to a remote server using RDP, the connection fails. Which action resolves this issue?
A. Adjust the MTU size within the routers.
B. Replace certificate on the RDP server.
C. Add RDP port to the extended ACL.
D. Change DMVPN timeout values.
Answer: B
NEW QUESTION: 4
You manage a cloud service that has a web application named WebRole1.
WebRole1 writes error messages to the Windows Event Log.
Users report receiving an error page with the following message: "Event 26 has occurred.
Contact your system administrator."
You need to access the WebRole1 event log.
Which three actions should you perform? Each correct answer presents part of the solution.
A. Run the Enable-AzureWebsiteApplicationDiagnostic PowerShell cmdlet.
B. Update the cloud service definition file and the service configuration file.
C. Update the WebRole1 web.config file.
D. Enable verbose monitoring.
E. Run the Set-AzureVMDiagnosticsExtensionPowerShell cmdlet.
F. Create a storage account.
Answer: B,D,F
Explanation:
step 1 specify the scheduled TransferLogLevelFilter to Verbose in the diagnostics.wadcfg step 2 Update the cloud service definition file and the service configuration file (.cspkg) step 3 best practice is to create a separate storage account for logging diagnostics data
References: http://azure.microsoft.com/en-us/documentation/articles/cloud-services-how-to-monitor/
D. _65503$
E. _65503.?$
F. _65503_
Answer: C
Explanation:
http://www.cisco.com/c/en/us/td/docs/ios/12_2/termserv/configuration/guide/ftersv_c/tcfaap re.html
NEW QUESTION: 3
An engineer has integrated a new DMVPN to link remote offices across the internet using Cisco IOS routers. When connecting to remote sites, pings and voice data appear to flow properly and all tunnel stats seem to show that are up. However, when trying to connect to a remote server using RDP, the connection fails. Which action resolves this issue?
A. Adjust the MTU size within the routers.
B. Replace certificate on the RDP server.
C. Add RDP port to the extended ACL.
D. Change DMVPN timeout values.
Answer: B
NEW QUESTION: 4
You manage a cloud service that has a web application named WebRole1.
WebRole1 writes error messages to the Windows Event Log.
Users report receiving an error page with the following message: "Event 26 has occurred.
Contact your system administrator."
You need to access the WebRole1 event log.
Which three actions should you perform? Each correct answer presents part of the solution.
A. Run the Enable-AzureWebsiteApplicationDiagnostic PowerShell cmdlet.
B. Update the cloud service definition file and the service configuration file.
C. Update the WebRole1 web.config file.
D. Enable verbose monitoring.
E. Run the Set-AzureVMDiagnosticsExtensionPowerShell cmdlet.
F. Create a storage account.
Answer: B,D,F
Explanation:
step 1 specify the scheduled TransferLogLevelFilter to Verbose in the diagnostics.wadcfg step 2 Update the cloud service definition file and the service configuration file (.cspkg) step 3 best practice is to create a separate storage account for logging diagnostics data
References: http://azure.microsoft.com/en-us/documentation/articles/cloud-services-how-to-monitor/
D. _65503$
E. _65503.?$
F. _65503_
Answer: C
Explanation:
http://www.cisco.com/c/en/us/td/docs/ios/12_2/termserv/configuration/guide/ftersv_c/tcfaap re.html
NEW QUESTION: 3
An engineer has integrated a new DMVPN to link remote offices across the internet using Cisco IOS routers. When connecting to remote sites, pings and voice data appear to flow properly and all tunnel stats seem to show that are up. However, when trying to connect to a remote server using RDP, the connection fails. Which action resolves this issue?
A. Adjust the MTU size within the routers.
B. Replace certificate on the RDP server.
C. Add RDP port to the extended ACL.
D. Change DMVPN timeout values.
Answer: B
NEW QUESTION: 4
You manage a cloud service that has a web application named WebRole1.
WebRole1 writes error messages to the Windows Event Log.
Users report receiving an error page with the following message: "Event 26 has occurred.
Contact your system administrator."
You need to access the WebRole1 event log.
Which three actions should you perform? Each correct answer presents part of the solution.
A. Run the Enable-AzureWebsiteApplicationDiagnostic PowerShell cmdlet.
B. Update the cloud service definition file and the service configuration file.
C. Update the WebRole1 web.config file.
D. Enable verbose monitoring.
E. Run the Set-AzureVMDiagnosticsExtensionPowerShell cmdlet.
F. Create a storage account.
Answer: B,D,F
Explanation:
step 1 specify the scheduled TransferLogLevelFilter to Verbose in the diagnostics.wadcfg step 2 Update the cloud service definition file and the service configuration file (.cspkg) step 3 best practice is to create a separate storage account for logging diagnostics data
References: http://azure.microsoft.com/en-us/documentation/articles/cloud-services-how-to-monitor/
This is more than a 1z0-1104-25 65503 .*
D. _65503$
E. _65503.?$
F. _65503_
Answer: C
Explanation:
http://www.cisco.com/c/en/us/td/docs/ios/12_2/termserv/configuration/guide/ftersv_c/tcfaap re.html
NEW QUESTION: 3
An engineer has integrated a new DMVPN to link remote offices across the internet using Cisco IOS routers. When connecting to remote sites, pings and voice data appear to flow properly and all tunnel stats seem to show that are up. However, when trying to connect to a remote server using RDP, the connection fails. Which action resolves this issue?
A. Adjust the MTU size within the routers.
B. Replace certificate on the RDP server.
C. Add RDP port to the extended ACL.
D. Change DMVPN timeout values.
Answer: B
NEW QUESTION: 4
You manage a cloud service that has a web application named WebRole1.
WebRole1 writes error messages to the Windows Event Log.
Users report receiving an error page with the following message: "Event 26 has occurred.
Contact your system administrator."
You need to access the WebRole1 event log.
Which three actions should you perform? Each correct answer presents part of the solution.
A. Run the Enable-AzureWebsiteApplicationDiagnostic PowerShell cmdlet.
B. Update the cloud service definition file and the service configuration file.
C. Update the WebRole1 web.config file.
D. Enable verbose monitoring.
E. Run the Set-AzureVMDiagnosticsExtensionPowerShell cmdlet.
F. Create a storage account.
Answer: B,D,F
Explanation:
step 1 specify the scheduled TransferLogLevelFilter to Verbose in the diagnostics.wadcfg step 2 Update the cloud service definition file and the service configuration file (.cspkg) step 3 best practice is to create a separate storage account for logging diagnostics data
References: http://azure.microsoft.com/en-us/documentation/articles/cloud-services-how-to-monitor/
- C_TS452_2022-German Testing Engine
- Process-Automation Probesfragen
- H29-321_V1.0 PDF Testsoftware
- HFCP Trainingsunterlagen
- H13-311_V4.0 Trainingsunterlagen
- C-THR12-2311-German Zertifikatsdemo
- C_SEN_2305 Prüfungsinformationen
- ISO-9001-Lead-Auditor Deutsch Prüfung
- COG170 Zertifizierungsprüfung
- C-SIGVT-2506 Zertifizierungsfragen
- 1Z0-1069-24 Deutsch
- JN0-252 Übungsmaterialien
- C_HCMP_2311 Quizfragen Und Antworten
- FCSS_SASE_AD-23 Online Prüfung
- CGEIT Examengine
- 250-605 Exam Fragen
- GDSA Vorbereitung
- MB-335 Prüfungsaufgaben
- L4M3 Deutsch
- 1z0-830 Fragenkatalog
- SC-401 Schulungsunterlagen
D. _65503$
E. _65503.?$
F. _65503_
Answer: C
Explanation:
http://www.cisco.com/c/en/us/td/docs/ios/12_2/termserv/configuration/guide/ftersv_c/tcfaap re.html
NEW QUESTION: 3
An engineer has integrated a new DMVPN to link remote offices across the internet using Cisco IOS routers. When connecting to remote sites, pings and voice data appear to flow properly and all tunnel stats seem to show that are up. However, when trying to connect to a remote server using RDP, the connection fails. Which action resolves this issue?
A. Adjust the MTU size within the routers.
B. Replace certificate on the RDP server.
C. Add RDP port to the extended ACL.
D. Change DMVPN timeout values.
Answer: B
NEW QUESTION: 4
You manage a cloud service that has a web application named WebRole1.
WebRole1 writes error messages to the Windows Event Log.
Users report receiving an error page with the following message: "Event 26 has occurred.
Contact your system administrator."
You need to access the WebRole1 event log.
Which three actions should you perform? Each correct answer presents part of the solution.
A. Run the Enable-AzureWebsiteApplicationDiagnostic PowerShell cmdlet.
B. Update the cloud service definition file and the service configuration file.
C. Update the WebRole1 web.config file.
D. Enable verbose monitoring.
E. Run the Set-AzureVMDiagnosticsExtensionPowerShell cmdlet.
F. Create a storage account.
Answer: B,D,F
Explanation:
step 1 specify the scheduled TransferLogLevelFilter to Verbose in the diagnostics.wadcfg step 2 Update the cloud service definition file and the service configuration file (.cspkg) step 3 best practice is to create a separate storage account for logging diagnostics data
References: http://azure.microsoft.com/en-us/documentation/articles/cloud-services-how-to-monitor/
D. _65503$
E. _65503.?$
F. _65503_
Answer: C
Explanation:
http://www.cisco.com/c/en/us/td/docs/ios/12_2/termserv/configuration/guide/ftersv_c/tcfaap re.html
NEW QUESTION: 3
An engineer has integrated a new DMVPN to link remote offices across the internet using Cisco IOS routers. When connecting to remote sites, pings and voice data appear to flow properly and all tunnel stats seem to show that are up. However, when trying to connect to a remote server using RDP, the connection fails. Which action resolves this issue?
A. Adjust the MTU size within the routers.
B. Replace certificate on the RDP server.
C. Add RDP port to the extended ACL.
D. Change DMVPN timeout values.
Answer: B
NEW QUESTION: 4
You manage a cloud service that has a web application named WebRole1.
WebRole1 writes error messages to the Windows Event Log.
Users report receiving an error page with the following message: "Event 26 has occurred.
Contact your system administrator."
You need to access the WebRole1 event log.
Which three actions should you perform? Each correct answer presents part of the solution.
A. Run the Enable-AzureWebsiteApplicationDiagnostic PowerShell cmdlet.
B. Update the cloud service definition file and the service configuration file.
C. Update the WebRole1 web.config file.
D. Enable verbose monitoring.
E. Run the Set-AzureVMDiagnosticsExtensionPowerShell cmdlet.
F. Create a storage account.
Answer: B,D,F
Explanation:
step 1 specify the scheduled TransferLogLevelFilter to Verbose in the diagnostics.wadcfg step 2 Update the cloud service definition file and the service configuration file (.cspkg) step 3 best practice is to create a separate storage account for logging diagnostics data
References: http://azure.microsoft.com/en-us/documentation/articles/cloud-services-how-to-monitor/
Ce-Isareti 1z0-1104-25 Demotesten ist eine Website, die Schulungsunterlagen zur IT-Zertifizierungsprüfung bietet, Oracle 1z0-1104-25 Prüfungsvorbereitung Man muss mindestens einmal erleben, auf die anscheinend begabt Leute, die die schwierigen Kenntnisse in sagenhaft kurzer Zeit beherrschen können, neidisch zu sein, Ce-Isareti hat die Oracle 1z0-1104-25 Prüfung schon mehrere Jahre geforscht.
In welcher seltsamen Vereinfachung und Fälschung lebt der CKAD Zertifikatsdemo Mensch, Im Jahr darauf bekam sie einen Sohn, einen wunderschönen kleinen Jungen mit Grübchen und schwarzen Locken.
Anstelle von Entseibstung können wir auch 1z0-1104-25 Prüfungsvorbereitung wie folgt bezeichnet werden: Stehen Sie sich selbst als Kommandant, mit anderenWorten als eine Person ohne Macht, Sie stand 1z0-1104-25 Prüfungsvorbereitung am Rande des Anlegers im Nebel, blass, zitternd und mit Gänsehaut überzogen.
Dezember Tokieda I, Einundzwanzig zweiundzwanzig Oh, haben wir Hochwasser, 1z0-1104-25 Prüfungsvorbereitung Die Tulpen und Feuerlilien, das sind Matronen, die passen auf, daß recht schön getanzt wird und alles fein ordentlich hergeht.
So viel können wir von unseren Freunden wohl verlangen, Er CASPO-001 Online Praxisprüfung sah aus, als würde er gleich wieder weinen, Die Welt ist das Reich des Lichts, und sie gibt und macht für alles Sinn.
Aktuelle Oracle 1z0-1104-25 Prüfung pdf Torrent für 1z0-1104-25 Examen Erfolg prep
Ich möchte keine weiteren Neffen, ist das klar, Er sieht gut aus, 1z0-1104-25 Prüfungsvorbereitung er fliegt davon Professor Trelawney seufzte, Ich merkte selbst, dass es steif klang, wie ein schlecht gelernter Text.
Da ist noch einer im Schrank sagte Hagrid, Erhebt die 1z0-1104-25 Prüfungsvorbereitung Seel erst aufwärts ihr Gefieder, Dann liebt sie mehr, je mehr zu lieben ist, Denn eine strahlt denGlanz der andern wieder- Und gnügt mein Wort dir nicht, 1z0-1104-25 Prüfungsvorbereitung in kurzer Frist Wird dort von dir Beatrix aufgefunden, Durch welche du dann ganz befriedigt bist.
Er sah mich misstrauisch an, als ich aus dem Bett stieg und auf 1z0-1104-25 Lernhilfe der Suche nach meinen Schuhen in dem dunklen Zimmer herumtastete, Doch sosehr ich ihn anstarrte ich kam nicht drauf.
Auffallend zu ahnden beschlossen hat, Im Hof traf Victarion 1z0-1104-25 Deutsch den alten Drumm und Gorold Guthbruder, die sich leise mit Rodrik Harlau unterhielten, Verstanden sagte Harry knapp.
Es wird ohne mir ach gehn, Es gibt Männer, die sich noch daran 1z0-1104-25 Testfagen erinnern, wie du ein kleines Mädchen warst, das nackt im Meer geschwommen ist und mit seiner Puppe gespielt hat.
Setzen Sie sich, Potter, Einen Moment lang hörte sie sich jünger an als https://pruefung.examfragen.de/1z0-1104-25-pruefung-fragen.html Myrcella, Dieser, von der Haltung und dem Aussehen des Jünglings überrascht, stand still und sagte ganz laut: Mein Gott, wie gleicht er ihm!
1z0-1104-25 Test Dumps, 1z0-1104-25 VCE Engine Ausbildung, 1z0-1104-25 aktuelle Prüfung
Im kalten silbrig blauen Licht der Schwerter https://onlinetests.zertpruefung.de/1z0-1104-25_exam.html wirkte sie bleich und grimmig, Dies ist ein intelligenter Weg dieses Wissens, der selbst durch den Gedanken des Objekts begrenzt ist, FCP_FWB_AD-7.4 Deutsche Prüfungsfragen intern das angeborene Wissen Kategorie) darüber, wie alle Objekte konstruiert sind.
Du bist die Einzige, die Garin retten kann, Ich war albern und 2V0-18.25 Demotesten oberflächlich, aber ich war zufrieden, Ja sagte Cho, unserem auch nicht, Stets wacher Schlaf, dein eignes Widerspiel!
Ja, ja, verfolgen.
NEW QUESTION: 1
Which three are advantages of the Java exception mechanism?
A. Provides a set of standard exceptions that covers all the possible errors
B. Improves the program structure because the error handling code is separated from the normal program function
C. Allows the creation of new exceptions that are tailored to the particular program being created
D. Improves the program structure because exceptions must be handled in the method in which they occurred
E. Improves the program structure because the programmer can choose where to handle exceptions
Answer: B,C,E
Explanation:
B is false. Standard exceptions not cover all possible errors. D is false. Exceptions don't have to be handled in the method in which they occurred.
NEW QUESTION: 2
Which as-path access-list regular expression should be applied on R2 as a neighbor filter list to only allow updates with an origin of AS 65503?
Refer to the exhibit.
A. 0
B.
What will you get with your purchase of the Unlimited Access Package for only $149.00?
- An overview of the 1z0-1104-25 65503 .*
D. _65503$
E. _65503.?$
F. _65503_
Answer: C
Explanation:
http://www.cisco.com/c/en/us/td/docs/ios/12_2/termserv/configuration/guide/ftersv_c/tcfaap re.htmlNEW QUESTION: 3
An engineer has integrated a new DMVPN to link remote offices across the internet using Cisco IOS routers. When connecting to remote sites, pings and voice data appear to flow properly and all tunnel stats seem to show that are up. However, when trying to connect to a remote server using RDP, the connection fails. Which action resolves this issue?
A. Adjust the MTU size within the routers.
B. Replace certificate on the RDP server.
C. Add RDP port to the extended ACL.
D. Change DMVPN timeout values.
Answer: BNEW QUESTION: 4
course through studying the questions and answers.
You manage a cloud service that has a web application named WebRole1.
WebRole1 writes error messages to the Windows Event Log.
Users report receiving an error page with the following message: "Event 26 has occurred.
Contact your system administrator."
You need to access the WebRole1 event log.
Which three actions should you perform? Each correct answer presents part of the solution.
A. Run the Enable-AzureWebsiteApplicationDiagnostic PowerShell cmdlet.
B. Update the cloud service definition file and the service configuration file.
C. Update the WebRole1 web.config file.
D. Enable verbose monitoring.
E. Run the Set-AzureVMDiagnosticsExtensionPowerShell cmdlet.
F. Create a storage account.
Answer: B,D,F
Explanation:
step 1 specify the scheduled TransferLogLevelFilter to Verbose in the diagnostics.wadcfg step 2 Update the cloud service definition file and the service configuration file (.cspkg) step 3 best practice is to create a separate storage account for logging diagnostics data
References: http://azure.microsoft.com/en-us/documentation/articles/cloud-services-how-to-monitor/ - A preview of actual 1z0-1104-25 65503 .*
D. _65503$
E. _65503.?$
F. _65503_
Answer: C
Explanation:
http://www.cisco.com/c/en/us/td/docs/ios/12_2/termserv/configuration/guide/ftersv_c/tcfaap re.htmlNEW QUESTION: 3
An engineer has integrated a new DMVPN to link remote offices across the internet using Cisco IOS routers. When connecting to remote sites, pings and voice data appear to flow properly and all tunnel stats seem to show that are up. However, when trying to connect to a remote server using RDP, the connection fails. Which action resolves this issue?
A. Adjust the MTU size within the routers.
B. Replace certificate on the RDP server.
C. Add RDP port to the extended ACL.
D. Change DMVPN timeout values.
Answer: BNEW QUESTION: 4
test questions
You manage a cloud service that has a web application named WebRole1.
WebRole1 writes error messages to the Windows Event Log.
Users report receiving an error page with the following message: "Event 26 has occurred.
Contact your system administrator."
You need to access the WebRole1 event log.
Which three actions should you perform? Each correct answer presents part of the solution.
A. Run the Enable-AzureWebsiteApplicationDiagnostic PowerShell cmdlet.
B. Update the cloud service definition file and the service configuration file.
C. Update the WebRole1 web.config file.
D. Enable verbose monitoring.
E. Run the Set-AzureVMDiagnosticsExtensionPowerShell cmdlet.
F. Create a storage account.
Answer: B,D,F
Explanation:
step 1 specify the scheduled TransferLogLevelFilter to Verbose in the diagnostics.wadcfg step 2 Update the cloud service definition file and the service configuration file (.cspkg) step 3 best practice is to create a separate storage account for logging diagnostics data
References: http://azure.microsoft.com/en-us/documentation/articles/cloud-services-how-to-monitor/ - Actual correct 1z0-1104-25 65503 .*
D. _65503$
E. _65503.?$
F. _65503_
Answer: C
Explanation:
http://www.cisco.com/c/en/us/td/docs/ios/12_2/termserv/configuration/guide/ftersv_c/tcfaap re.htmlNEW QUESTION: 3
An engineer has integrated a new DMVPN to link remote offices across the internet using Cisco IOS routers. When connecting to remote sites, pings and voice data appear to flow properly and all tunnel stats seem to show that are up. However, when trying to connect to a remote server using RDP, the connection fails. Which action resolves this issue?
A. Adjust the MTU size within the routers.
B. Replace certificate on the RDP server.
C. Add RDP port to the extended ACL.
D. Change DMVPN timeout values.
Answer: BNEW QUESTION: 4
answers to the latest 65503 .*
You manage a cloud service that has a web application named WebRole1.
WebRole1 writes error messages to the Windows Event Log.
Users report receiving an error page with the following message: "Event 26 has occurred.
Contact your system administrator."
You need to access the WebRole1 event log.
Which three actions should you perform? Each correct answer presents part of the solution.
A. Run the Enable-AzureWebsiteApplicationDiagnostic PowerShell cmdlet.
B. Update the cloud service definition file and the service configuration file.
C. Update the WebRole1 web.config file.
D. Enable verbose monitoring.
E. Run the Set-AzureVMDiagnosticsExtensionPowerShell cmdlet.
F. Create a storage account.
Answer: B,D,F
Explanation:
step 1 specify the scheduled TransferLogLevelFilter to Verbose in the diagnostics.wadcfg step 2 Update the cloud service definition file and the service configuration file (.cspkg) step 3 best practice is to create a separate storage account for logging diagnostics data
References: http://azure.microsoft.com/en-us/documentation/articles/cloud-services-how-to-monitor/
D. _65503$
E. _65503.?$
F. _65503_
Answer: C
Explanation:
http://www.cisco.com/c/en/us/td/docs/ios/12_2/termserv/configuration/guide/ftersv_c/tcfaap re.htmlNEW QUESTION: 3
An engineer has integrated a new DMVPN to link remote offices across the internet using Cisco IOS routers. When connecting to remote sites, pings and voice data appear to flow properly and all tunnel stats seem to show that are up. However, when trying to connect to a remote server using RDP, the connection fails. Which action resolves this issue?
A. Adjust the MTU size within the routers.
B. Replace certificate on the RDP server.
C. Add RDP port to the extended ACL.
D. Change DMVPN timeout values.
Answer: BNEW QUESTION: 4
questions
You manage a cloud service that has a web application named WebRole1.
WebRole1 writes error messages to the Windows Event Log.
Users report receiving an error page with the following message: "Event 26 has occurred.
Contact your system administrator."
You need to access the WebRole1 event log.
Which three actions should you perform? Each correct answer presents part of the solution.
A. Run the Enable-AzureWebsiteApplicationDiagnostic PowerShell cmdlet.
B. Update the cloud service definition file and the service configuration file.
C. Update the WebRole1 web.config file.
D. Enable verbose monitoring.
E. Run the Set-AzureVMDiagnosticsExtensionPowerShell cmdlet.
F. Create a storage account.
Answer: B,D,F
Explanation:
step 1 specify the scheduled TransferLogLevelFilter to Verbose in the diagnostics.wadcfg step 2 Update the cloud service definition file and the service configuration file (.cspkg) step 3 best practice is to create a separate storage account for logging diagnostics data
References: http://azure.microsoft.com/en-us/documentation/articles/cloud-services-how-to-monitor/
Our Unlimited Access Package will prepare you for your exam with guaranteed results, surpassing other 1z0-1104-25 65503 .*
D. _65503$
E. _65503.?$
F. _65503_
Answer: C
Explanation:
http://www.cisco.com/c/en/us/td/docs/ios/12_2/termserv/configuration/guide/ftersv_c/tcfaap re.html
NEW QUESTION: 3
An engineer has integrated a new DMVPN to link remote offices across the internet using Cisco IOS routers. When connecting to remote sites, pings and voice data appear to flow properly and all tunnel stats seem to show that are up. However, when trying to connect to a remote server using RDP, the connection fails. Which action resolves this issue?
A. Adjust the MTU size within the routers.
B. Replace certificate on the RDP server.
C. Add RDP port to the extended ACL.
D. Change DMVPN timeout values.
Answer: B
NEW QUESTION: 4
You manage a cloud service that has a web application named WebRole1.
WebRole1 writes error messages to the Windows Event Log.
Users report receiving an error page with the following message: "Event 26 has occurred.
Contact your system administrator."
You need to access the WebRole1 event log.
Which three actions should you perform? Each correct answer presents part of the solution.
A. Run the Enable-AzureWebsiteApplicationDiagnostic PowerShell cmdlet.
B. Update the cloud service definition file and the service configuration file.
C. Update the WebRole1 web.config file.
D. Enable verbose monitoring.
E. Run the Set-AzureVMDiagnosticsExtensionPowerShell cmdlet.
F. Create a storage account.
Answer: B,D,F
Explanation:
step 1 specify the scheduled TransferLogLevelFilter to Verbose in the diagnostics.wadcfg step 2 Update the cloud service definition file and the service configuration file (.cspkg) step 3 best practice is to create a separate storage account for logging diagnostics data
References: http://azure.microsoft.com/en-us/documentation/articles/cloud-services-how-to-monitor/
D. _65503$
E. _65503.?$
F. _65503_
Answer: C
Explanation:
http://www.cisco.com/c/en/us/td/docs/ios/12_2/termserv/configuration/guide/ftersv_c/tcfaap re.html
NEW QUESTION: 3
An engineer has integrated a new DMVPN to link remote offices across the internet using Cisco IOS routers. When connecting to remote sites, pings and voice data appear to flow properly and all tunnel stats seem to show that are up. However, when trying to connect to a remote server using RDP, the connection fails. Which action resolves this issue?
A. Adjust the MTU size within the routers.
B. Replace certificate on the RDP server.
C. Add RDP port to the extended ACL.
D. Change DMVPN timeout values.
Answer: B
NEW QUESTION: 4
You manage a cloud service that has a web application named WebRole1.
WebRole1 writes error messages to the Windows Event Log.
Users report receiving an error page with the following message: "Event 26 has occurred.
Contact your system administrator."
You need to access the WebRole1 event log.
Which three actions should you perform? Each correct answer presents part of the solution.
A. Run the Enable-AzureWebsiteApplicationDiagnostic PowerShell cmdlet.
B. Update the cloud service definition file and the service configuration file.
C. Update the WebRole1 web.config file.
D. Enable verbose monitoring.
E. Run the Set-AzureVMDiagnosticsExtensionPowerShell cmdlet.
F. Create a storage account.
Answer: B,D,F
Explanation:
step 1 specify the scheduled TransferLogLevelFilter to Verbose in the diagnostics.wadcfg step 2 Update the cloud service definition file and the service configuration file (.cspkg) step 3 best practice is to create a separate storage account for logging diagnostics data
References: http://azure.microsoft.com/en-us/documentation/articles/cloud-services-how-to-monitor/
D. _65503$
E. _65503.?$
F. _65503_
Answer: C
Explanation:
http://www.cisco.com/c/en/us/td/docs/ios/12_2/termserv/configuration/guide/ftersv_c/tcfaap re.html
NEW QUESTION: 3
An engineer has integrated a new DMVPN to link remote offices across the internet using Cisco IOS routers. When connecting to remote sites, pings and voice data appear to flow properly and all tunnel stats seem to show that are up. However, when trying to connect to a remote server using RDP, the connection fails. Which action resolves this issue?
A. Adjust the MTU size within the routers.
B. Replace certificate on the RDP server.
C. Add RDP port to the extended ACL.
D. Change DMVPN timeout values.
Answer: B
NEW QUESTION: 4
You manage a cloud service that has a web application named WebRole1.
WebRole1 writes error messages to the Windows Event Log.
Users report receiving an error page with the following message: "Event 26 has occurred.
Contact your system administrator."
You need to access the WebRole1 event log.
Which three actions should you perform? Each correct answer presents part of the solution.
A. Run the Enable-AzureWebsiteApplicationDiagnostic PowerShell cmdlet.
B. Update the cloud service definition file and the service configuration file.
C. Update the WebRole1 web.config file.
D. Enable verbose monitoring.
E. Run the Set-AzureVMDiagnosticsExtensionPowerShell cmdlet.
F. Create a storage account.
Answer: B,D,F
Explanation:
step 1 specify the scheduled TransferLogLevelFilter to Verbose in the diagnostics.wadcfg step 2 Update the cloud service definition file and the service configuration file (.cspkg) step 3 best practice is to create a separate storage account for logging diagnostics data
References: http://azure.microsoft.com/en-us/documentation/articles/cloud-services-how-to-monitor/
D. _65503$
E. _65503.?$
F. _65503_
Answer: C
Explanation:
http://www.cisco.com/c/en/us/td/docs/ios/12_2/termserv/configuration/guide/ftersv_c/tcfaap re.html
NEW QUESTION: 3
An engineer has integrated a new DMVPN to link remote offices across the internet using Cisco IOS routers. When connecting to remote sites, pings and voice data appear to flow properly and all tunnel stats seem to show that are up. However, when trying to connect to a remote server using RDP, the connection fails. Which action resolves this issue?
A. Adjust the MTU size within the routers.
B. Replace certificate on the RDP server.
C. Add RDP port to the extended ACL.
D. Change DMVPN timeout values.
Answer: B
NEW QUESTION: 4
You manage a cloud service that has a web application named WebRole1.
WebRole1 writes error messages to the Windows Event Log.
Users report receiving an error page with the following message: "Event 26 has occurred.
Contact your system administrator."
You need to access the WebRole1 event log.
Which three actions should you perform? Each correct answer presents part of the solution.
A. Run the Enable-AzureWebsiteApplicationDiagnostic PowerShell cmdlet.
B. Update the cloud service definition file and the service configuration file.
C. Update the WebRole1 web.config file.
D. Enable verbose monitoring.
E. Run the Set-AzureVMDiagnosticsExtensionPowerShell cmdlet.
F. Create a storage account.
Answer: B,D,F
Explanation:
step 1 specify the scheduled TransferLogLevelFilter to Verbose in the diagnostics.wadcfg step 2 Update the cloud service definition file and the service configuration file (.cspkg) step 3 best practice is to create a separate storage account for logging diagnostics data
References: http://azure.microsoft.com/en-us/documentation/articles/cloud-services-how-to-monitor/
D. _65503$
E. _65503.?$
F. _65503_
Answer: C
Explanation:
http://www.cisco.com/c/en/us/td/docs/ios/12_2/termserv/configuration/guide/ftersv_c/tcfaap re.html
NEW QUESTION: 3
An engineer has integrated a new DMVPN to link remote offices across the internet using Cisco IOS routers. When connecting to remote sites, pings and voice data appear to flow properly and all tunnel stats seem to show that are up. However, when trying to connect to a remote server using RDP, the connection fails. Which action resolves this issue?
A. Adjust the MTU size within the routers.
B. Replace certificate on the RDP server.
C. Add RDP port to the extended ACL.
D. Change DMVPN timeout values.
Answer: B
NEW QUESTION: 4
You manage a cloud service that has a web application named WebRole1.
WebRole1 writes error messages to the Windows Event Log.
Users report receiving an error page with the following message: "Event 26 has occurred.
Contact your system administrator."
You need to access the WebRole1 event log.
Which three actions should you perform? Each correct answer presents part of the solution.
A. Run the Enable-AzureWebsiteApplicationDiagnostic PowerShell cmdlet.
B. Update the cloud service definition file and the service configuration file.
C. Update the WebRole1 web.config file.
D. Enable verbose monitoring.
E. Run the Set-AzureVMDiagnosticsExtensionPowerShell cmdlet.
F. Create a storage account.
Answer: B,D,F
Explanation:
step 1 specify the scheduled TransferLogLevelFilter to Verbose in the diagnostics.wadcfg step 2 Update the cloud service definition file and the service configuration file (.cspkg) step 3 best practice is to create a separate storage account for logging diagnostics data
References: http://azure.microsoft.com/en-us/documentation/articles/cloud-services-how-to-monitor/
D. _65503$
E. _65503.?$
F. _65503_
Answer: C
Explanation:
http://www.cisco.com/c/en/us/td/docs/ios/12_2/termserv/configuration/guide/ftersv_c/tcfaap re.html
NEW QUESTION: 3
An engineer has integrated a new DMVPN to link remote offices across the internet using Cisco IOS routers. When connecting to remote sites, pings and voice data appear to flow properly and all tunnel stats seem to show that are up. However, when trying to connect to a remote server using RDP, the connection fails. Which action resolves this issue?
A. Adjust the MTU size within the routers.
B. Replace certificate on the RDP server.
C. Add RDP port to the extended ACL.
D. Change DMVPN timeout values.
Answer: B
NEW QUESTION: 4
You manage a cloud service that has a web application named WebRole1.
WebRole1 writes error messages to the Windows Event Log.
Users report receiving an error page with the following message: "Event 26 has occurred.
Contact your system administrator."
You need to access the WebRole1 event log.
Which three actions should you perform? Each correct answer presents part of the solution.
A. Run the Enable-AzureWebsiteApplicationDiagnostic PowerShell cmdlet.
B. Update the cloud service definition file and the service configuration file.
C. Update the WebRole1 web.config file.
D. Enable verbose monitoring.
E. Run the Set-AzureVMDiagnosticsExtensionPowerShell cmdlet.
F. Create a storage account.
Answer: B,D,F
Explanation:
step 1 specify the scheduled TransferLogLevelFilter to Verbose in the diagnostics.wadcfg step 2 Update the cloud service definition file and the service configuration file (.cspkg) step 3 best practice is to create a separate storage account for logging diagnostics data
References: http://azure.microsoft.com/en-us/documentation/articles/cloud-services-how-to-monitor/
Skip all the worthless 1z0-1104-25 65503 .*
D. _65503$
E. _65503.?$
F. _65503_
Answer: C
Explanation:
http://www.cisco.com/c/en/us/td/docs/ios/12_2/termserv/configuration/guide/ftersv_c/tcfaap re.html
NEW QUESTION: 3
An engineer has integrated a new DMVPN to link remote offices across the internet using Cisco IOS routers. When connecting to remote sites, pings and voice data appear to flow properly and all tunnel stats seem to show that are up. However, when trying to connect to a remote server using RDP, the connection fails. Which action resolves this issue?
A. Adjust the MTU size within the routers.
B. Replace certificate on the RDP server.
C. Add RDP port to the extended ACL.
D. Change DMVPN timeout values.
Answer: B
NEW QUESTION: 4
You manage a cloud service that has a web application named WebRole1.
WebRole1 writes error messages to the Windows Event Log.
Users report receiving an error page with the following message: "Event 26 has occurred.
Contact your system administrator."
You need to access the WebRole1 event log.
Which three actions should you perform? Each correct answer presents part of the solution.
A. Run the Enable-AzureWebsiteApplicationDiagnostic PowerShell cmdlet.
B. Update the cloud service definition file and the service configuration file.
C. Update the WebRole1 web.config file.
D. Enable verbose monitoring.
E. Run the Set-AzureVMDiagnosticsExtensionPowerShell cmdlet.
F. Create a storage account.
Answer: B,D,F
Explanation:
step 1 specify the scheduled TransferLogLevelFilter to Verbose in the diagnostics.wadcfg step 2 Update the cloud service definition file and the service configuration file (.cspkg) step 3 best practice is to create a separate storage account for logging diagnostics data
References: http://azure.microsoft.com/en-us/documentation/articles/cloud-services-how-to-monitor/
- C_TS452_2022-German Testing Engine
- Process-Automation Probesfragen
- H29-321_V1.0 PDF Testsoftware
- HFCP Trainingsunterlagen
- H13-311_V4.0 Trainingsunterlagen
- C-THR12-2311-German Zertifikatsdemo
- C_SEN_2305 Prüfungsinformationen
- ISO-9001-Lead-Auditor Deutsch Prüfung
- COG170 Zertifizierungsprüfung
- C-SIGVT-2506 Zertifizierungsfragen
- 1Z0-1069-24 Deutsch
- JN0-252 Übungsmaterialien
- C_HCMP_2311 Quizfragen Und Antworten
- FCSS_SASE_AD-23 Online Prüfung
- CGEIT Examengine
- 250-605 Exam Fragen
- GDSA Vorbereitung
- MB-335 Prüfungsaufgaben
- L4M3 Deutsch
- 1z0-830 Fragenkatalog
- SC-401 Schulungsunterlagen
65503 .*
D. _65503$
E. _65503.?$
F. _65503_
Answer: C
Explanation:
http://www.cisco.com/c/en/us/td/docs/ios/12_2/termserv/configuration/guide/ftersv_c/tcfaap re.html
NEW QUESTION: 3
An engineer has integrated a new DMVPN to link remote offices across the internet using Cisco IOS routers. When connecting to remote sites, pings and voice data appear to flow properly and all tunnel stats seem to show that are up. However, when trying to connect to a remote server using RDP, the connection fails. Which action resolves this issue?
A. Adjust the MTU size within the routers.
B. Replace certificate on the RDP server.
C. Add RDP port to the extended ACL.
D. Change DMVPN timeout values.
Answer: B
NEW QUESTION: 4
You manage a cloud service that has a web application named WebRole1.
WebRole1 writes error messages to the Windows Event Log.
Users report receiving an error page with the following message: "Event 26 has occurred.
Contact your system administrator."
You need to access the WebRole1 event log.
Which three actions should you perform? Each correct answer presents part of the solution.
A. Run the Enable-AzureWebsiteApplicationDiagnostic PowerShell cmdlet.
B. Update the cloud service definition file and the service configuration file.
C. Update the WebRole1 web.config file.
D. Enable verbose monitoring.
E. Run the Set-AzureVMDiagnosticsExtensionPowerShell cmdlet.
F. Create a storage account.
Answer: B,D,F
Explanation:
step 1 specify the scheduled TransferLogLevelFilter to Verbose in the diagnostics.wadcfg step 2 Update the cloud service definition file and the service configuration file (.cspkg) step 3 best practice is to create a separate storage account for logging diagnostics data
References: http://azure.microsoft.com/en-us/documentation/articles/cloud-services-how-to-monitor/
Difficulty finding the right 1z0-1104-25 65503 .*
D. _65503$
E. _65503.?$
F. _65503_
Answer: C
Explanation:
http://www.cisco.com/c/en/us/td/docs/ios/12_2/termserv/configuration/guide/ftersv_c/tcfaap re.html
NEW QUESTION: 3
An engineer has integrated a new DMVPN to link remote offices across the internet using Cisco IOS routers. When connecting to remote sites, pings and voice data appear to flow properly and all tunnel stats seem to show that are up. However, when trying to connect to a remote server using RDP, the connection fails. Which action resolves this issue?
A. Adjust the MTU size within the routers.
B. Replace certificate on the RDP server.
C. Add RDP port to the extended ACL.
D. Change DMVPN timeout values.
Answer: B
NEW QUESTION: 4
You manage a cloud service that has a web application named WebRole1.
WebRole1 writes error messages to the Windows Event Log.
Users report receiving an error page with the following message: "Event 26 has occurred.
Contact your system administrator."
You need to access the WebRole1 event log.
Which three actions should you perform? Each correct answer presents part of the solution.
A. Run the Enable-AzureWebsiteApplicationDiagnostic PowerShell cmdlet.
B. Update the cloud service definition file and the service configuration file.
C. Update the WebRole1 web.config file.
D. Enable verbose monitoring.
E. Run the Set-AzureVMDiagnosticsExtensionPowerShell cmdlet.
F. Create a storage account.
Answer: B,D,F
Explanation:
step 1 specify the scheduled TransferLogLevelFilter to Verbose in the diagnostics.wadcfg step 2 Update the cloud service definition file and the service configuration file (.cspkg) step 3 best practice is to create a separate storage account for logging diagnostics data
References: http://azure.microsoft.com/en-us/documentation/articles/cloud-services-how-to-monitor/
D. _65503$
E. _65503.?$
F. _65503_
Answer: C
Explanation:
http://www.cisco.com/c/en/us/td/docs/ios/12_2/termserv/configuration/guide/ftersv_c/tcfaap re.html
NEW QUESTION: 3
An engineer has integrated a new DMVPN to link remote offices across the internet using Cisco IOS routers. When connecting to remote sites, pings and voice data appear to flow properly and all tunnel stats seem to show that are up. However, when trying to connect to a remote server using RDP, the connection fails. Which action resolves this issue?
A. Adjust the MTU size within the routers.
B. Replace certificate on the RDP server.
C. Add RDP port to the extended ACL.
D. Change DMVPN timeout values.
Answer: B
NEW QUESTION: 4
You manage a cloud service that has a web application named WebRole1.
WebRole1 writes error messages to the Windows Event Log.
Users report receiving an error page with the following message: "Event 26 has occurred.
Contact your system administrator."
You need to access the WebRole1 event log.
Which three actions should you perform? Each correct answer presents part of the solution.
A. Run the Enable-AzureWebsiteApplicationDiagnostic PowerShell cmdlet.
B. Update the cloud service definition file and the service configuration file.
C. Update the WebRole1 web.config file.
D. Enable verbose monitoring.
E. Run the Set-AzureVMDiagnosticsExtensionPowerShell cmdlet.
F. Create a storage account.
Answer: B,D,F
Explanation:
step 1 specify the scheduled TransferLogLevelFilter to Verbose in the diagnostics.wadcfg step 2 Update the cloud service definition file and the service configuration file (.cspkg) step 3 best practice is to create a separate storage account for logging diagnostics data
References: http://azure.microsoft.com/en-us/documentation/articles/cloud-services-how-to-monitor/
D. _65503$
E. _65503.?$
F. _65503_
Answer: C
Explanation:
http://www.cisco.com/c/en/us/td/docs/ios/12_2/termserv/configuration/guide/ftersv_c/tcfaap re.html
NEW QUESTION: 3
An engineer has integrated a new DMVPN to link remote offices across the internet using Cisco IOS routers. When connecting to remote sites, pings and voice data appear to flow properly and all tunnel stats seem to show that are up. However, when trying to connect to a remote server using RDP, the connection fails. Which action resolves this issue?
A. Adjust the MTU size within the routers.
B. Replace certificate on the RDP server.
C. Add RDP port to the extended ACL.
D. Change DMVPN timeout values.
Answer: B
NEW QUESTION: 4
You manage a cloud service that has a web application named WebRole1.
WebRole1 writes error messages to the Windows Event Log.
Users report receiving an error page with the following message: "Event 26 has occurred.
Contact your system administrator."
You need to access the WebRole1 event log.
Which three actions should you perform? Each correct answer presents part of the solution.
A. Run the Enable-AzureWebsiteApplicationDiagnostic PowerShell cmdlet.
B. Update the cloud service definition file and the service configuration file.
C. Update the WebRole1 web.config file.
D. Enable verbose monitoring.
E. Run the Set-AzureVMDiagnosticsExtensionPowerShell cmdlet.
F. Create a storage account.
Answer: B,D,F
Explanation:
step 1 specify the scheduled TransferLogLevelFilter to Verbose in the diagnostics.wadcfg step 2 Update the cloud service definition file and the service configuration file (.cspkg) step 3 best practice is to create a separate storage account for logging diagnostics data
References: http://azure.microsoft.com/en-us/documentation/articles/cloud-services-how-to-monitor/
D. _65503$
E. _65503.?$
F. _65503_
Answer: C
Explanation:
http://www.cisco.com/c/en/us/td/docs/ios/12_2/termserv/configuration/guide/ftersv_c/tcfaap re.html
NEW QUESTION: 3
An engineer has integrated a new DMVPN to link remote offices across the internet using Cisco IOS routers. When connecting to remote sites, pings and voice data appear to flow properly and all tunnel stats seem to show that are up. However, when trying to connect to a remote server using RDP, the connection fails. Which action resolves this issue?
A. Adjust the MTU size within the routers.
B. Replace certificate on the RDP server.
C. Add RDP port to the extended ACL.
D. Change DMVPN timeout values.
Answer: B
NEW QUESTION: 4
You manage a cloud service that has a web application named WebRole1.
WebRole1 writes error messages to the Windows Event Log.
Users report receiving an error page with the following message: "Event 26 has occurred.
Contact your system administrator."
You need to access the WebRole1 event log.
Which three actions should you perform? Each correct answer presents part of the solution.
A. Run the Enable-AzureWebsiteApplicationDiagnostic PowerShell cmdlet.
B. Update the cloud service definition file and the service configuration file.
C. Update the WebRole1 web.config file.
D. Enable verbose monitoring.
E. Run the Set-AzureVMDiagnosticsExtensionPowerShell cmdlet.
F. Create a storage account.
Answer: B,D,F
Explanation:
step 1 specify the scheduled TransferLogLevelFilter to Verbose in the diagnostics.wadcfg step 2 Update the cloud service definition file and the service configuration file (.cspkg) step 3 best practice is to create a separate storage account for logging diagnostics data
References: http://azure.microsoft.com/en-us/documentation/articles/cloud-services-how-to-monitor/
- C_TS452_2022-German Testing Engine
- Process-Automation Probesfragen
- H29-321_V1.0 PDF Testsoftware
- HFCP Trainingsunterlagen
- H13-311_V4.0 Trainingsunterlagen
- C-THR12-2311-German Zertifikatsdemo
- C_SEN_2305 Prüfungsinformationen
- ISO-9001-Lead-Auditor Deutsch Prüfung
- COG170 Zertifizierungsprüfung
- C-SIGVT-2506 Zertifizierungsfragen
- 1Z0-1069-24 Deutsch
- JN0-252 Übungsmaterialien
- C_HCMP_2311 Quizfragen Und Antworten
- FCSS_SASE_AD-23 Online Prüfung
- CGEIT Examengine
- 250-605 Exam Fragen
- GDSA Vorbereitung
- MB-335 Prüfungsaufgaben
- L4M3 Deutsch
- 1z0-830 Fragenkatalog
- SC-401 Schulungsunterlagen
D. _65503$
E. _65503.?$
F. _65503_
Answer: C
Explanation:
http://www.cisco.com/c/en/us/td/docs/ios/12_2/termserv/configuration/guide/ftersv_c/tcfaap re.html
NEW QUESTION: 3
An engineer has integrated a new DMVPN to link remote offices across the internet using Cisco IOS routers. When connecting to remote sites, pings and voice data appear to flow properly and all tunnel stats seem to show that are up. However, when trying to connect to a remote server using RDP, the connection fails. Which action resolves this issue?
A. Adjust the MTU size within the routers.
B. Replace certificate on the RDP server.
C. Add RDP port to the extended ACL.
D. Change DMVPN timeout values.
Answer: B
NEW QUESTION: 4
You manage a cloud service that has a web application named WebRole1.
WebRole1 writes error messages to the Windows Event Log.
Users report receiving an error page with the following message: "Event 26 has occurred.
Contact your system administrator."
You need to access the WebRole1 event log.
Which three actions should you perform? Each correct answer presents part of the solution.
A. Run the Enable-AzureWebsiteApplicationDiagnostic PowerShell cmdlet.
B. Update the cloud service definition file and the service configuration file.
C. Update the WebRole1 web.config file.
D. Enable verbose monitoring.
E. Run the Set-AzureVMDiagnosticsExtensionPowerShell cmdlet.
F. Create a storage account.
Answer: B,D,F
Explanation:
step 1 specify the scheduled TransferLogLevelFilter to Verbose in the diagnostics.wadcfg step 2 Update the cloud service definition file and the service configuration file (.cspkg) step 3 best practice is to create a separate storage account for logging diagnostics data
References: http://azure.microsoft.com/en-us/documentation/articles/cloud-services-how-to-monitor/
- C_TS452_2022-German Testing Engine
- Process-Automation Probesfragen
- H29-321_V1.0 PDF Testsoftware
- HFCP Trainingsunterlagen
- H13-311_V4.0 Trainingsunterlagen
- C-THR12-2311-German Zertifikatsdemo
- C_SEN_2305 Prüfungsinformationen
- ISO-9001-Lead-Auditor Deutsch Prüfung
- COG170 Zertifizierungsprüfung
- C-SIGVT-2506 Zertifizierungsfragen
- 1Z0-1069-24 Deutsch
- JN0-252 Übungsmaterialien
- C_HCMP_2311 Quizfragen Und Antworten
- FCSS_SASE_AD-23 Online Prüfung
- CGEIT Examengine
- 250-605 Exam Fragen
- GDSA Vorbereitung
- MB-335 Prüfungsaufgaben
- L4M3 Deutsch
- 1z0-830 Fragenkatalog
- SC-401 Schulungsunterlagen
D. _65503$
E. _65503.?$
F. _65503_
Answer: C
Explanation:
http://www.cisco.com/c/en/us/td/docs/ios/12_2/termserv/configuration/guide/ftersv_c/tcfaap re.html
NEW QUESTION: 3
An engineer has integrated a new DMVPN to link remote offices across the internet using Cisco IOS routers. When connecting to remote sites, pings and voice data appear to flow properly and all tunnel stats seem to show that are up. However, when trying to connect to a remote server using RDP, the connection fails. Which action resolves this issue?
A. Adjust the MTU size within the routers.
B. Replace certificate on the RDP server.
C. Add RDP port to the extended ACL.
D. Change DMVPN timeout values.
Answer: B
NEW QUESTION: 4
You manage a cloud service that has a web application named WebRole1.
WebRole1 writes error messages to the Windows Event Log.
Users report receiving an error page with the following message: "Event 26 has occurred.
Contact your system administrator."
You need to access the WebRole1 event log.
Which three actions should you perform? Each correct answer presents part of the solution.
A. Run the Enable-AzureWebsiteApplicationDiagnostic PowerShell cmdlet.
B. Update the cloud service definition file and the service configuration file.
C. Update the WebRole1 web.config file.
D. Enable verbose monitoring.
E. Run the Set-AzureVMDiagnosticsExtensionPowerShell cmdlet.
F. Create a storage account.
Answer: B,D,F
Explanation:
step 1 specify the scheduled TransferLogLevelFilter to Verbose in the diagnostics.wadcfg step 2 Update the cloud service definition file and the service configuration file (.cspkg) step 3 best practice is to create a separate storage account for logging diagnostics data
References: http://azure.microsoft.com/en-us/documentation/articles/cloud-services-how-to-monitor/
D. _65503$
E. _65503.?$
F. _65503_
Answer: C
Explanation:
http://www.cisco.com/c/en/us/td/docs/ios/12_2/termserv/configuration/guide/ftersv_c/tcfaap re.html
NEW QUESTION: 3
An engineer has integrated a new DMVPN to link remote offices across the internet using Cisco IOS routers. When connecting to remote sites, pings and voice data appear to flow properly and all tunnel stats seem to show that are up. However, when trying to connect to a remote server using RDP, the connection fails. Which action resolves this issue?
A. Adjust the MTU size within the routers.
B. Replace certificate on the RDP server.
C. Add RDP port to the extended ACL.
D. Change DMVPN timeout values.
Answer: B
NEW QUESTION: 4
You manage a cloud service that has a web application named WebRole1.
WebRole1 writes error messages to the Windows Event Log.
Users report receiving an error page with the following message: "Event 26 has occurred.
Contact your system administrator."
You need to access the WebRole1 event log.
Which three actions should you perform? Each correct answer presents part of the solution.
A. Run the Enable-AzureWebsiteApplicationDiagnostic PowerShell cmdlet.
B. Update the cloud service definition file and the service configuration file.
C. Update the WebRole1 web.config file.
D. Enable verbose monitoring.
E. Run the Set-AzureVMDiagnosticsExtensionPowerShell cmdlet.
F. Create a storage account.
Answer: B,D,F
Explanation:
step 1 specify the scheduled TransferLogLevelFilter to Verbose in the diagnostics.wadcfg step 2 Update the cloud service definition file and the service configuration file (.cspkg) step 3 best practice is to create a separate storage account for logging diagnostics data
References: http://azure.microsoft.com/en-us/documentation/articles/cloud-services-how-to-monitor/
D. _65503$
E. _65503.?$
F. _65503_
Answer: C
Explanation:
http://www.cisco.com/c/en/us/td/docs/ios/12_2/termserv/configuration/guide/ftersv_c/tcfaap re.html
NEW QUESTION: 3
An engineer has integrated a new DMVPN to link remote offices across the internet using Cisco IOS routers. When connecting to remote sites, pings and voice data appear to flow properly and all tunnel stats seem to show that are up. However, when trying to connect to a remote server using RDP, the connection fails. Which action resolves this issue?
A. Adjust the MTU size within the routers.
B. Replace certificate on the RDP server.
C. Add RDP port to the extended ACL.
D. Change DMVPN timeout values.
Answer: B
NEW QUESTION: 4
You manage a cloud service that has a web application named WebRole1.
WebRole1 writes error messages to the Windows Event Log.
Users report receiving an error page with the following message: "Event 26 has occurred.
Contact your system administrator."
You need to access the WebRole1 event log.
Which three actions should you perform? Each correct answer presents part of the solution.
A. Run the Enable-AzureWebsiteApplicationDiagnostic PowerShell cmdlet.
B. Update the cloud service definition file and the service configuration file.
C. Update the WebRole1 web.config file.
D. Enable verbose monitoring.
E. Run the Set-AzureVMDiagnosticsExtensionPowerShell cmdlet.
F. Create a storage account.
Answer: B,D,F
Explanation:
step 1 specify the scheduled TransferLogLevelFilter to Verbose in the diagnostics.wadcfg step 2 Update the cloud service definition file and the service configuration file (.cspkg) step 3 best practice is to create a separate storage account for logging diagnostics data
References: http://azure.microsoft.com/en-us/documentation/articles/cloud-services-how-to-monitor/
65503 .*
D. _65503$
E. _65503.?$
F. _65503_
Answer: C
Explanation:
http://www.cisco.com/c/en/us/td/docs/ios/12_2/termserv/configuration/guide/ftersv_c/tcfaap re.html
NEW QUESTION: 3
An engineer has integrated a new DMVPN to link remote offices across the internet using Cisco IOS routers. When connecting to remote sites, pings and voice data appear to flow properly and all tunnel stats seem to show that are up. However, when trying to connect to a remote server using RDP, the connection fails. Which action resolves this issue?
A. Adjust the MTU size within the routers.
B. Replace certificate on the RDP server.
C. Add RDP port to the extended ACL.
D. Change DMVPN timeout values.
Answer: B
NEW QUESTION: 4
You manage a cloud service that has a web application named WebRole1.
WebRole1 writes error messages to the Windows Event Log.
Users report receiving an error page with the following message: "Event 26 has occurred.
Contact your system administrator."
You need to access the WebRole1 event log.
Which three actions should you perform? Each correct answer presents part of the solution.
A. Run the Enable-AzureWebsiteApplicationDiagnostic PowerShell cmdlet.
B. Update the cloud service definition file and the service configuration file.
C. Update the WebRole1 web.config file.
D. Enable verbose monitoring.
E. Run the Set-AzureVMDiagnosticsExtensionPowerShell cmdlet.
F. Create a storage account.
Answer: B,D,F
Explanation:
step 1 specify the scheduled TransferLogLevelFilter to Verbose in the diagnostics.wadcfg step 2 Update the cloud service definition file and the service configuration file (.cspkg) step 3 best practice is to create a separate storage account for logging diagnostics data
References: http://azure.microsoft.com/en-us/documentation/articles/cloud-services-how-to-monitor/
Still searching for 1z0-1104-25 65503 .*
D. _65503$
E. _65503.?$
F. _65503_
Answer: C
Explanation:
http://www.cisco.com/c/en/us/td/docs/ios/12_2/termserv/configuration/guide/ftersv_c/tcfaap re.html
NEW QUESTION: 3
An engineer has integrated a new DMVPN to link remote offices across the internet using Cisco IOS routers. When connecting to remote sites, pings and voice data appear to flow properly and all tunnel stats seem to show that are up. However, when trying to connect to a remote server using RDP, the connection fails. Which action resolves this issue?
A. Adjust the MTU size within the routers.
B. Replace certificate on the RDP server.
C. Add RDP port to the extended ACL.
D. Change DMVPN timeout values.
Answer: B
NEW QUESTION: 4
You manage a cloud service that has a web application named WebRole1.
WebRole1 writes error messages to the Windows Event Log.
Users report receiving an error page with the following message: "Event 26 has occurred.
Contact your system administrator."
You need to access the WebRole1 event log.
Which three actions should you perform? Each correct answer presents part of the solution.
A. Run the Enable-AzureWebsiteApplicationDiagnostic PowerShell cmdlet.
B. Update the cloud service definition file and the service configuration file.
C. Update the WebRole1 web.config file.
D. Enable verbose monitoring.
E. Run the Set-AzureVMDiagnosticsExtensionPowerShell cmdlet.
F. Create a storage account.
Answer: B,D,F
Explanation:
step 1 specify the scheduled TransferLogLevelFilter to Verbose in the diagnostics.wadcfg step 2 Update the cloud service definition file and the service configuration file (.cspkg) step 3 best practice is to create a separate storage account for logging diagnostics data
References: http://azure.microsoft.com/en-us/documentation/articles/cloud-services-how-to-monitor/
D. _65503$
E. _65503.?$
F. _65503_
Answer: C
Explanation:
http://www.cisco.com/c/en/us/td/docs/ios/12_2/termserv/configuration/guide/ftersv_c/tcfaap re.html
NEW QUESTION: 3
An engineer has integrated a new DMVPN to link remote offices across the internet using Cisco IOS routers. When connecting to remote sites, pings and voice data appear to flow properly and all tunnel stats seem to show that are up. However, when trying to connect to a remote server using RDP, the connection fails. Which action resolves this issue?
A. Adjust the MTU size within the routers.
B. Replace certificate on the RDP server.
C. Add RDP port to the extended ACL.
D. Change DMVPN timeout values.
Answer: B
NEW QUESTION: 4
You manage a cloud service that has a web application named WebRole1.
WebRole1 writes error messages to the Windows Event Log.
Users report receiving an error page with the following message: "Event 26 has occurred.
Contact your system administrator."
You need to access the WebRole1 event log.
Which three actions should you perform? Each correct answer presents part of the solution.
A. Run the Enable-AzureWebsiteApplicationDiagnostic PowerShell cmdlet.
B. Update the cloud service definition file and the service configuration file.
C. Update the WebRole1 web.config file.
D. Enable verbose monitoring.
E. Run the Set-AzureVMDiagnosticsExtensionPowerShell cmdlet.
F. Create a storage account.
Answer: B,D,F
Explanation:
step 1 specify the scheduled TransferLogLevelFilter to Verbose in the diagnostics.wadcfg step 2 Update the cloud service definition file and the service configuration file (.cspkg) step 3 best practice is to create a separate storage account for logging diagnostics data
References: http://azure.microsoft.com/en-us/documentation/articles/cloud-services-how-to-monitor/
D. _65503$
E. _65503.?$
F. _65503_
Answer: C
Explanation:
http://www.cisco.com/c/en/us/td/docs/ios/12_2/termserv/configuration/guide/ftersv_c/tcfaap re.html
NEW QUESTION: 3
An engineer has integrated a new DMVPN to link remote offices across the internet using Cisco IOS routers. When connecting to remote sites, pings and voice data appear to flow properly and all tunnel stats seem to show that are up. However, when trying to connect to a remote server using RDP, the connection fails. Which action resolves this issue?
A. Adjust the MTU size within the routers.
B. Replace certificate on the RDP server.
C. Add RDP port to the extended ACL.
D. Change DMVPN timeout values.
Answer: B
NEW QUESTION: 4
You manage a cloud service that has a web application named WebRole1.
WebRole1 writes error messages to the Windows Event Log.
Users report receiving an error page with the following message: "Event 26 has occurred.
Contact your system administrator."
You need to access the WebRole1 event log.
Which three actions should you perform? Each correct answer presents part of the solution.
A. Run the Enable-AzureWebsiteApplicationDiagnostic PowerShell cmdlet.
B. Update the cloud service definition file and the service configuration file.
C. Update the WebRole1 web.config file.
D. Enable verbose monitoring.
E. Run the Set-AzureVMDiagnosticsExtensionPowerShell cmdlet.
F. Create a storage account.
Answer: B,D,F
Explanation:
step 1 specify the scheduled TransferLogLevelFilter to Verbose in the diagnostics.wadcfg step 2 Update the cloud service definition file and the service configuration file (.cspkg) step 3 best practice is to create a separate storage account for logging diagnostics data
References: http://azure.microsoft.com/en-us/documentation/articles/cloud-services-how-to-monitor/
D. _65503$
E. _65503.?$
F. _65503_
Answer: C
Explanation:
http://www.cisco.com/c/en/us/td/docs/ios/12_2/termserv/configuration/guide/ftersv_c/tcfaap re.html
NEW QUESTION: 3
An engineer has integrated a new DMVPN to link remote offices across the internet using Cisco IOS routers. When connecting to remote sites, pings and voice data appear to flow properly and all tunnel stats seem to show that are up. However, when trying to connect to a remote server using RDP, the connection fails. Which action resolves this issue?
A. Adjust the MTU size within the routers.
B. Replace certificate on the RDP server.
C. Add RDP port to the extended ACL.
D. Change DMVPN timeout values.
Answer: B
NEW QUESTION: 4
You manage a cloud service that has a web application named WebRole1.
WebRole1 writes error messages to the Windows Event Log.
Users report receiving an error page with the following message: "Event 26 has occurred.
Contact your system administrator."
You need to access the WebRole1 event log.
Which three actions should you perform? Each correct answer presents part of the solution.
A. Run the Enable-AzureWebsiteApplicationDiagnostic PowerShell cmdlet.
B. Update the cloud service definition file and the service configuration file.
C. Update the WebRole1 web.config file.
D. Enable verbose monitoring.
E. Run the Set-AzureVMDiagnosticsExtensionPowerShell cmdlet.
F. Create a storage account.
Answer: B,D,F
Explanation:
step 1 specify the scheduled TransferLogLevelFilter to Verbose in the diagnostics.wadcfg step 2 Update the cloud service definition file and the service configuration file (.cspkg) step 3 best practice is to create a separate storage account for logging diagnostics data
References: http://azure.microsoft.com/en-us/documentation/articles/cloud-services-how-to-monitor/
D. _65503$
E. _65503.?$
F. _65503_
Answer: C
Explanation:
http://www.cisco.com/c/en/us/td/docs/ios/12_2/termserv/configuration/guide/ftersv_c/tcfaap re.html
NEW QUESTION: 3
An engineer has integrated a new DMVPN to link remote offices across the internet using Cisco IOS routers. When connecting to remote sites, pings and voice data appear to flow properly and all tunnel stats seem to show that are up. However, when trying to connect to a remote server using RDP, the connection fails. Which action resolves this issue?
A. Adjust the MTU size within the routers.
B. Replace certificate on the RDP server.
C. Add RDP port to the extended ACL.
D. Change DMVPN timeout values.
Answer: B
NEW QUESTION: 4
You manage a cloud service that has a web application named WebRole1.
WebRole1 writes error messages to the Windows Event Log.
Users report receiving an error page with the following message: "Event 26 has occurred.
Contact your system administrator."
You need to access the WebRole1 event log.
Which three actions should you perform? Each correct answer presents part of the solution.
A. Run the Enable-AzureWebsiteApplicationDiagnostic PowerShell cmdlet.
B. Update the cloud service definition file and the service configuration file.
C. Update the WebRole1 web.config file.
D. Enable verbose monitoring.
E. Run the Set-AzureVMDiagnosticsExtensionPowerShell cmdlet.
F. Create a storage account.
Answer: B,D,F
Explanation:
step 1 specify the scheduled TransferLogLevelFilter to Verbose in the diagnostics.wadcfg step 2 Update the cloud service definition file and the service configuration file (.cspkg) step 3 best practice is to create a separate storage account for logging diagnostics data
References: http://azure.microsoft.com/en-us/documentation/articles/cloud-services-how-to-monitor/
D. _65503$
E. _65503.?$
F. _65503_
Answer: C
Explanation:
http://www.cisco.com/c/en/us/td/docs/ios/12_2/termserv/configuration/guide/ftersv_c/tcfaap re.html
NEW QUESTION: 3
An engineer has integrated a new DMVPN to link remote offices across the internet using Cisco IOS routers. When connecting to remote sites, pings and voice data appear to flow properly and all tunnel stats seem to show that are up. However, when trying to connect to a remote server using RDP, the connection fails. Which action resolves this issue?
A. Adjust the MTU size within the routers.
B. Replace certificate on the RDP server.
C. Add RDP port to the extended ACL.
D. Change DMVPN timeout values.
Answer: B
NEW QUESTION: 4
You manage a cloud service that has a web application named WebRole1.
WebRole1 writes error messages to the Windows Event Log.
Users report receiving an error page with the following message: "Event 26 has occurred.
Contact your system administrator."
You need to access the WebRole1 event log.
Which three actions should you perform? Each correct answer presents part of the solution.
A. Run the Enable-AzureWebsiteApplicationDiagnostic PowerShell cmdlet.
B. Update the cloud service definition file and the service configuration file.
C. Update the WebRole1 web.config file.
D. Enable verbose monitoring.
E. Run the Set-AzureVMDiagnosticsExtensionPowerShell cmdlet.
F. Create a storage account.
Answer: B,D,F
Explanation:
step 1 specify the scheduled TransferLogLevelFilter to Verbose in the diagnostics.wadcfg step 2 Update the cloud service definition file and the service configuration file (.cspkg) step 3 best practice is to create a separate storage account for logging diagnostics data
References: http://azure.microsoft.com/en-us/documentation/articles/cloud-services-how-to-monitor/
D. _65503$
E. _65503.?$
F. _65503_
Answer: C
Explanation:
http://www.cisco.com/c/en/us/td/docs/ios/12_2/termserv/configuration/guide/ftersv_c/tcfaap re.html
NEW QUESTION: 3
An engineer has integrated a new DMVPN to link remote offices across the internet using Cisco IOS routers. When connecting to remote sites, pings and voice data appear to flow properly and all tunnel stats seem to show that are up. However, when trying to connect to a remote server using RDP, the connection fails. Which action resolves this issue?
A. Adjust the MTU size within the routers.
B. Replace certificate on the RDP server.
C. Add RDP port to the extended ACL.
D. Change DMVPN timeout values.
Answer: B
NEW QUESTION: 4
You manage a cloud service that has a web application named WebRole1.
WebRole1 writes error messages to the Windows Event Log.
Users report receiving an error page with the following message: "Event 26 has occurred.
Contact your system administrator."
You need to access the WebRole1 event log.
Which three actions should you perform? Each correct answer presents part of the solution.
A. Run the Enable-AzureWebsiteApplicationDiagnostic PowerShell cmdlet.
B. Update the cloud service definition file and the service configuration file.
C. Update the WebRole1 web.config file.
D. Enable verbose monitoring.
E. Run the Set-AzureVMDiagnosticsExtensionPowerShell cmdlet.
F. Create a storage account.
Answer: B,D,F
Explanation:
step 1 specify the scheduled TransferLogLevelFilter to Verbose in the diagnostics.wadcfg step 2 Update the cloud service definition file and the service configuration file (.cspkg) step 3 best practice is to create a separate storage account for logging diagnostics data
References: http://azure.microsoft.com/en-us/documentation/articles/cloud-services-how-to-monitor/
65503 .*
D. _65503$
E. _65503.?$
F. _65503_
Answer: C
Explanation:
http://www.cisco.com/c/en/us/td/docs/ios/12_2/termserv/configuration/guide/ftersv_c/tcfaap re.html
NEW QUESTION: 3
An engineer has integrated a new DMVPN to link remote offices across the internet using Cisco IOS routers. When connecting to remote sites, pings and voice data appear to flow properly and all tunnel stats seem to show that are up. However, when trying to connect to a remote server using RDP, the connection fails. Which action resolves this issue?
A. Adjust the MTU size within the routers.
B. Replace certificate on the RDP server.
C. Add RDP port to the extended ACL.
D. Change DMVPN timeout values.
Answer: B
NEW QUESTION: 4
You manage a cloud service that has a web application named WebRole1.
WebRole1 writes error messages to the Windows Event Log.
Users report receiving an error page with the following message: "Event 26 has occurred.
Contact your system administrator."
You need to access the WebRole1 event log.
Which three actions should you perform? Each correct answer presents part of the solution.
A. Run the Enable-AzureWebsiteApplicationDiagnostic PowerShell cmdlet.
B. Update the cloud service definition file and the service configuration file.
C. Update the WebRole1 web.config file.
D. Enable verbose monitoring.
E. Run the Set-AzureVMDiagnosticsExtensionPowerShell cmdlet.
F. Create a storage account.
Answer: B,D,F
Explanation:
step 1 specify the scheduled TransferLogLevelFilter to Verbose in the diagnostics.wadcfg step 2 Update the cloud service definition file and the service configuration file (.cspkg) step 3 best practice is to create a separate storage account for logging diagnostics data
References: http://azure.microsoft.com/en-us/documentation/articles/cloud-services-how-to-monitor/
Keep walking if all you want is free 1z0-1104-25 65503 .*
D. _65503$
E. _65503.?$
F. _65503_
Answer: C
Explanation:
http://www.cisco.com/c/en/us/td/docs/ios/12_2/termserv/configuration/guide/ftersv_c/tcfaap re.html
NEW QUESTION: 3
An engineer has integrated a new DMVPN to link remote offices across the internet using Cisco IOS routers. When connecting to remote sites, pings and voice data appear to flow properly and all tunnel stats seem to show that are up. However, when trying to connect to a remote server using RDP, the connection fails. Which action resolves this issue?
A. Adjust the MTU size within the routers.
B. Replace certificate on the RDP server.
C. Add RDP port to the extended ACL.
D. Change DMVPN timeout values.
Answer: B
NEW QUESTION: 4
You manage a cloud service that has a web application named WebRole1.
WebRole1 writes error messages to the Windows Event Log.
Users report receiving an error page with the following message: "Event 26 has occurred.
Contact your system administrator."
You need to access the WebRole1 event log.
Which three actions should you perform? Each correct answer presents part of the solution.
A. Run the Enable-AzureWebsiteApplicationDiagnostic PowerShell cmdlet.
B. Update the cloud service definition file and the service configuration file.
C. Update the WebRole1 web.config file.
D. Enable verbose monitoring.
E. Run the Set-AzureVMDiagnosticsExtensionPowerShell cmdlet.
F. Create a storage account.
Answer: B,D,F
Explanation:
step 1 specify the scheduled TransferLogLevelFilter to Verbose in the diagnostics.wadcfg step 2 Update the cloud service definition file and the service configuration file (.cspkg) step 3 best practice is to create a separate storage account for logging diagnostics data
References: http://azure.microsoft.com/en-us/documentation/articles/cloud-services-how-to-monitor/
D. _65503$
E. _65503.?$
F. _65503_
Answer: C
Explanation:
http://www.cisco.com/c/en/us/td/docs/ios/12_2/termserv/configuration/guide/ftersv_c/tcfaap re.html
NEW QUESTION: 3
An engineer has integrated a new DMVPN to link remote offices across the internet using Cisco IOS routers. When connecting to remote sites, pings and voice data appear to flow properly and all tunnel stats seem to show that are up. However, when trying to connect to a remote server using RDP, the connection fails. Which action resolves this issue?
A. Adjust the MTU size within the routers.
B. Replace certificate on the RDP server.
C. Add RDP port to the extended ACL.
D. Change DMVPN timeout values.
Answer: B
NEW QUESTION: 4
You manage a cloud service that has a web application named WebRole1.
WebRole1 writes error messages to the Windows Event Log.
Users report receiving an error page with the following message: "Event 26 has occurred.
Contact your system administrator."
You need to access the WebRole1 event log.
Which three actions should you perform? Each correct answer presents part of the solution.
A. Run the Enable-AzureWebsiteApplicationDiagnostic PowerShell cmdlet.
B. Update the cloud service definition file and the service configuration file.
C. Update the WebRole1 web.config file.
D. Enable verbose monitoring.
E. Run the Set-AzureVMDiagnosticsExtensionPowerShell cmdlet.
F. Create a storage account.
Answer: B,D,F
Explanation:
step 1 specify the scheduled TransferLogLevelFilter to Verbose in the diagnostics.wadcfg step 2 Update the cloud service definition file and the service configuration file (.cspkg) step 3 best practice is to create a separate storage account for logging diagnostics data
References: http://azure.microsoft.com/en-us/documentation/articles/cloud-services-how-to-monitor/
- C_TS452_2022-German Testing Engine
- Process-Automation Probesfragen
- H29-321_V1.0 PDF Testsoftware
- HFCP Trainingsunterlagen
- H13-311_V4.0 Trainingsunterlagen
- C-THR12-2311-German Zertifikatsdemo
- C_SEN_2305 Prüfungsinformationen
- ISO-9001-Lead-Auditor Deutsch Prüfung
- COG170 Zertifizierungsprüfung
- C-SIGVT-2506 Zertifizierungsfragen
- 1Z0-1069-24 Deutsch
- JN0-252 Übungsmaterialien
- C_HCMP_2311 Quizfragen Und Antworten
- FCSS_SASE_AD-23 Online Prüfung
- CGEIT Examengine
- 250-605 Exam Fragen
- GDSA Vorbereitung
- MB-335 Prüfungsaufgaben
- L4M3 Deutsch
- 1z0-830 Fragenkatalog
- SC-401 Schulungsunterlagen
D. _65503$
E. _65503.?$
F. _65503_
Answer: C
Explanation:
http://www.cisco.com/c/en/us/td/docs/ios/12_2/termserv/configuration/guide/ftersv_c/tcfaap re.html
NEW QUESTION: 3
An engineer has integrated a new DMVPN to link remote offices across the internet using Cisco IOS routers. When connecting to remote sites, pings and voice data appear to flow properly and all tunnel stats seem to show that are up. However, when trying to connect to a remote server using RDP, the connection fails. Which action resolves this issue?
A. Adjust the MTU size within the routers.
B. Replace certificate on the RDP server.
C. Add RDP port to the extended ACL.
D. Change DMVPN timeout values.
Answer: B
NEW QUESTION: 4
You manage a cloud service that has a web application named WebRole1.
WebRole1 writes error messages to the Windows Event Log.
Users report receiving an error page with the following message: "Event 26 has occurred.
Contact your system administrator."
You need to access the WebRole1 event log.
Which three actions should you perform? Each correct answer presents part of the solution.
A. Run the Enable-AzureWebsiteApplicationDiagnostic PowerShell cmdlet.
B. Update the cloud service definition file and the service configuration file.
C. Update the WebRole1 web.config file.
D. Enable verbose monitoring.
E. Run the Set-AzureVMDiagnosticsExtensionPowerShell cmdlet.
F. Create a storage account.
Answer: B,D,F
Explanation:
step 1 specify the scheduled TransferLogLevelFilter to Verbose in the diagnostics.wadcfg step 2 Update the cloud service definition file and the service configuration file (.cspkg) step 3 best practice is to create a separate storage account for logging diagnostics data
References: http://azure.microsoft.com/en-us/documentation/articles/cloud-services-how-to-monitor/
D. _65503$
E. _65503.?$
F. _65503_
Answer: C
Explanation:
http://www.cisco.com/c/en/us/td/docs/ios/12_2/termserv/configuration/guide/ftersv_c/tcfaap re.html
NEW QUESTION: 3
An engineer has integrated a new DMVPN to link remote offices across the internet using Cisco IOS routers. When connecting to remote sites, pings and voice data appear to flow properly and all tunnel stats seem to show that are up. However, when trying to connect to a remote server using RDP, the connection fails. Which action resolves this issue?
A. Adjust the MTU size within the routers.
B. Replace certificate on the RDP server.
C. Add RDP port to the extended ACL.
D. Change DMVPN timeout values.
Answer: B
NEW QUESTION: 4
You manage a cloud service that has a web application named WebRole1.
WebRole1 writes error messages to the Windows Event Log.
Users report receiving an error page with the following message: "Event 26 has occurred.
Contact your system administrator."
You need to access the WebRole1 event log.
Which three actions should you perform? Each correct answer presents part of the solution.
A. Run the Enable-AzureWebsiteApplicationDiagnostic PowerShell cmdlet.
B. Update the cloud service definition file and the service configuration file.
C. Update the WebRole1 web.config file.
D. Enable verbose monitoring.
E. Run the Set-AzureVMDiagnosticsExtensionPowerShell cmdlet.
F. Create a storage account.
Answer: B,D,F
Explanation:
step 1 specify the scheduled TransferLogLevelFilter to Verbose in the diagnostics.wadcfg step 2 Update the cloud service definition file and the service configuration file (.cspkg) step 3 best practice is to create a separate storage account for logging diagnostics data
References: http://azure.microsoft.com/en-us/documentation/articles/cloud-services-how-to-monitor/
D. _65503$
E. _65503.?$
F. _65503_
Answer: C
Explanation:
http://www.cisco.com/c/en/us/td/docs/ios/12_2/termserv/configuration/guide/ftersv_c/tcfaap re.html
NEW QUESTION: 3
An engineer has integrated a new DMVPN to link remote offices across the internet using Cisco IOS routers. When connecting to remote sites, pings and voice data appear to flow properly and all tunnel stats seem to show that are up. However, when trying to connect to a remote server using RDP, the connection fails. Which action resolves this issue?
A. Adjust the MTU size within the routers.
B. Replace certificate on the RDP server.
C. Add RDP port to the extended ACL.
D. Change DMVPN timeout values.
Answer: B
NEW QUESTION: 4
You manage a cloud service that has a web application named WebRole1.
WebRole1 writes error messages to the Windows Event Log.
Users report receiving an error page with the following message: "Event 26 has occurred.
Contact your system administrator."
You need to access the WebRole1 event log.
Which three actions should you perform? Each correct answer presents part of the solution.
A. Run the Enable-AzureWebsiteApplicationDiagnostic PowerShell cmdlet.
B. Update the cloud service definition file and the service configuration file.
C. Update the WebRole1 web.config file.
D. Enable verbose monitoring.
E. Run the Set-AzureVMDiagnosticsExtensionPowerShell cmdlet.
F. Create a storage account.
Answer: B,D,F
Explanation:
step 1 specify the scheduled TransferLogLevelFilter to Verbose in the diagnostics.wadcfg step 2 Update the cloud service definition file and the service configuration file (.cspkg) step 3 best practice is to create a separate storage account for logging diagnostics data
References: http://azure.microsoft.com/en-us/documentation/articles/cloud-services-how-to-monitor/
D. _65503$
E. _65503.?$
F. _65503_
Answer: C
Explanation:
http://www.cisco.com/c/en/us/td/docs/ios/12_2/termserv/configuration/guide/ftersv_c/tcfaap re.html
NEW QUESTION: 3
An engineer has integrated a new DMVPN to link remote offices across the internet using Cisco IOS routers. When connecting to remote sites, pings and voice data appear to flow properly and all tunnel stats seem to show that are up. However, when trying to connect to a remote server using RDP, the connection fails. Which action resolves this issue?
A. Adjust the MTU size within the routers.
B. Replace certificate on the RDP server.
C. Add RDP port to the extended ACL.
D. Change DMVPN timeout values.
Answer: B
NEW QUESTION: 4
You manage a cloud service that has a web application named WebRole1.
WebRole1 writes error messages to the Windows Event Log.
Users report receiving an error page with the following message: "Event 26 has occurred.
Contact your system administrator."
You need to access the WebRole1 event log.
Which three actions should you perform? Each correct answer presents part of the solution.
A. Run the Enable-AzureWebsiteApplicationDiagnostic PowerShell cmdlet.
B. Update the cloud service definition file and the service configuration file.
C. Update the WebRole1 web.config file.
D. Enable verbose monitoring.
E. Run the Set-AzureVMDiagnosticsExtensionPowerShell cmdlet.
F. Create a storage account.
Answer: B,D,F
Explanation:
step 1 specify the scheduled TransferLogLevelFilter to Verbose in the diagnostics.wadcfg step 2 Update the cloud service definition file and the service configuration file (.cspkg) step 3 best practice is to create a separate storage account for logging diagnostics data
References: http://azure.microsoft.com/en-us/documentation/articles/cloud-services-how-to-monitor/
65503 .*
D. _65503$
E. _65503.?$
F. _65503_
Answer: C
Explanation:
http://www.cisco.com/c/en/us/td/docs/ios/12_2/termserv/configuration/guide/ftersv_c/tcfaap re.html
NEW QUESTION: 3
An engineer has integrated a new DMVPN to link remote offices across the internet using Cisco IOS routers. When connecting to remote sites, pings and voice data appear to flow properly and all tunnel stats seem to show that are up. However, when trying to connect to a remote server using RDP, the connection fails. Which action resolves this issue?
A. Adjust the MTU size within the routers.
B. Replace certificate on the RDP server.
C. Add RDP port to the extended ACL.
D. Change DMVPN timeout values.
Answer: B
NEW QUESTION: 4
You manage a cloud service that has a web application named WebRole1.
WebRole1 writes error messages to the Windows Event Log.
Users report receiving an error page with the following message: "Event 26 has occurred.
Contact your system administrator."
You need to access the WebRole1 event log.
Which three actions should you perform? Each correct answer presents part of the solution.
A. Run the Enable-AzureWebsiteApplicationDiagnostic PowerShell cmdlet.
B. Update the cloud service definition file and the service configuration file.
C. Update the WebRole1 web.config file.
D. Enable verbose monitoring.
E. Run the Set-AzureVMDiagnosticsExtensionPowerShell cmdlet.
F. Create a storage account.
Answer: B,D,F
Explanation:
step 1 specify the scheduled TransferLogLevelFilter to Verbose in the diagnostics.wadcfg step 2 Update the cloud service definition file and the service configuration file (.cspkg) step 3 best practice is to create a separate storage account for logging diagnostics data
References: http://azure.microsoft.com/en-us/documentation/articles/cloud-services-how-to-monitor/
What you will not find at Ce-Isareti are latest 1z0-1104-25 65503 .*
D. _65503$
E. _65503.?$
F. _65503_
Answer: C
Explanation:
http://www.cisco.com/c/en/us/td/docs/ios/12_2/termserv/configuration/guide/ftersv_c/tcfaap re.html
NEW QUESTION: 3
An engineer has integrated a new DMVPN to link remote offices across the internet using Cisco IOS routers. When connecting to remote sites, pings and voice data appear to flow properly and all tunnel stats seem to show that are up. However, when trying to connect to a remote server using RDP, the connection fails. Which action resolves this issue?
A. Adjust the MTU size within the routers.
B. Replace certificate on the RDP server.
C. Add RDP port to the extended ACL.
D. Change DMVPN timeout values.
Answer: B
NEW QUESTION: 4
You manage a cloud service that has a web application named WebRole1.
WebRole1 writes error messages to the Windows Event Log.
Users report receiving an error page with the following message: "Event 26 has occurred.
Contact your system administrator."
You need to access the WebRole1 event log.
Which three actions should you perform? Each correct answer presents part of the solution.
A. Run the Enable-AzureWebsiteApplicationDiagnostic PowerShell cmdlet.
B. Update the cloud service definition file and the service configuration file.
C. Update the WebRole1 web.config file.
D. Enable verbose monitoring.
E. Run the Set-AzureVMDiagnosticsExtensionPowerShell cmdlet.
F. Create a storage account.
Answer: B,D,F
Explanation:
step 1 specify the scheduled TransferLogLevelFilter to Verbose in the diagnostics.wadcfg step 2 Update the cloud service definition file and the service configuration file (.cspkg) step 3 best practice is to create a separate storage account for logging diagnostics data
References: http://azure.microsoft.com/en-us/documentation/articles/cloud-services-how-to-monitor/
D. _65503$
E. _65503.?$
F. _65503_
Answer: C
Explanation:
http://www.cisco.com/c/en/us/td/docs/ios/12_2/termserv/configuration/guide/ftersv_c/tcfaap re.html
NEW QUESTION: 3
An engineer has integrated a new DMVPN to link remote offices across the internet using Cisco IOS routers. When connecting to remote sites, pings and voice data appear to flow properly and all tunnel stats seem to show that are up. However, when trying to connect to a remote server using RDP, the connection fails. Which action resolves this issue?
A. Adjust the MTU size within the routers.
B. Replace certificate on the RDP server.
C. Add RDP port to the extended ACL.
D. Change DMVPN timeout values.
Answer: B
NEW QUESTION: 4
You manage a cloud service that has a web application named WebRole1.
WebRole1 writes error messages to the Windows Event Log.
Users report receiving an error page with the following message: "Event 26 has occurred.
Contact your system administrator."
You need to access the WebRole1 event log.
Which three actions should you perform? Each correct answer presents part of the solution.
A. Run the Enable-AzureWebsiteApplicationDiagnostic PowerShell cmdlet.
B. Update the cloud service definition file and the service configuration file.
C. Update the WebRole1 web.config file.
D. Enable verbose monitoring.
E. Run the Set-AzureVMDiagnosticsExtensionPowerShell cmdlet.
F. Create a storage account.
Answer: B,D,F
Explanation:
step 1 specify the scheduled TransferLogLevelFilter to Verbose in the diagnostics.wadcfg step 2 Update the cloud service definition file and the service configuration file (.cspkg) step 3 best practice is to create a separate storage account for logging diagnostics data
References: http://azure.microsoft.com/en-us/documentation/articles/cloud-services-how-to-monitor/
D. _65503$
E. _65503.?$
F. _65503_
Answer: C
Explanation:
http://www.cisco.com/c/en/us/td/docs/ios/12_2/termserv/configuration/guide/ftersv_c/tcfaap re.html
NEW QUESTION: 3
An engineer has integrated a new DMVPN to link remote offices across the internet using Cisco IOS routers. When connecting to remote sites, pings and voice data appear to flow properly and all tunnel stats seem to show that are up. However, when trying to connect to a remote server using RDP, the connection fails. Which action resolves this issue?
A. Adjust the MTU size within the routers.
B. Replace certificate on the RDP server.
C. Add RDP port to the extended ACL.
D. Change DMVPN timeout values.
Answer: B
NEW QUESTION: 4
You manage a cloud service that has a web application named WebRole1.
WebRole1 writes error messages to the Windows Event Log.
Users report receiving an error page with the following message: "Event 26 has occurred.
Contact your system administrator."
You need to access the WebRole1 event log.
Which three actions should you perform? Each correct answer presents part of the solution.
A. Run the Enable-AzureWebsiteApplicationDiagnostic PowerShell cmdlet.
B. Update the cloud service definition file and the service configuration file.
C. Update the WebRole1 web.config file.
D. Enable verbose monitoring.
E. Run the Set-AzureVMDiagnosticsExtensionPowerShell cmdlet.
F. Create a storage account.
Answer: B,D,F
Explanation:
step 1 specify the scheduled TransferLogLevelFilter to Verbose in the diagnostics.wadcfg step 2 Update the cloud service definition file and the service configuration file (.cspkg) step 3 best practice is to create a separate storage account for logging diagnostics data
References: http://azure.microsoft.com/en-us/documentation/articles/cloud-services-how-to-monitor/
- C_TS452_2022-German Testing Engine
- Process-Automation Probesfragen
- H29-321_V1.0 PDF Testsoftware
- HFCP Trainingsunterlagen
- H13-311_V4.0 Trainingsunterlagen
- C-THR12-2311-German Zertifikatsdemo
- C_SEN_2305 Prüfungsinformationen
- ISO-9001-Lead-Auditor Deutsch Prüfung
- COG170 Zertifizierungsprüfung
- C-SIGVT-2506 Zertifizierungsfragen
- 1Z0-1069-24 Deutsch
- JN0-252 Übungsmaterialien
- C_HCMP_2311 Quizfragen Und Antworten
- FCSS_SASE_AD-23 Online Prüfung
- CGEIT Examengine
- 250-605 Exam Fragen
- GDSA Vorbereitung
- MB-335 Prüfungsaufgaben
- L4M3 Deutsch
- 1z0-830 Fragenkatalog
- SC-401 Schulungsunterlagen
D. _65503$
E. _65503.?$
F. _65503_
Answer: C
Explanation:
http://www.cisco.com/c/en/us/td/docs/ios/12_2/termserv/configuration/guide/ftersv_c/tcfaap re.html
NEW QUESTION: 3
An engineer has integrated a new DMVPN to link remote offices across the internet using Cisco IOS routers. When connecting to remote sites, pings and voice data appear to flow properly and all tunnel stats seem to show that are up. However, when trying to connect to a remote server using RDP, the connection fails. Which action resolves this issue?
A. Adjust the MTU size within the routers.
B. Replace certificate on the RDP server.
C. Add RDP port to the extended ACL.
D. Change DMVPN timeout values.
Answer: B
NEW QUESTION: 4
You manage a cloud service that has a web application named WebRole1.
WebRole1 writes error messages to the Windows Event Log.
Users report receiving an error page with the following message: "Event 26 has occurred.
Contact your system administrator."
You need to access the WebRole1 event log.
Which three actions should you perform? Each correct answer presents part of the solution.
A. Run the Enable-AzureWebsiteApplicationDiagnostic PowerShell cmdlet.
B. Update the cloud service definition file and the service configuration file.
C. Update the WebRole1 web.config file.
D. Enable verbose monitoring.
E. Run the Set-AzureVMDiagnosticsExtensionPowerShell cmdlet.
F. Create a storage account.
Answer: B,D,F
Explanation:
step 1 specify the scheduled TransferLogLevelFilter to Verbose in the diagnostics.wadcfg step 2 Update the cloud service definition file and the service configuration file (.cspkg) step 3 best practice is to create a separate storage account for logging diagnostics data
References: http://azure.microsoft.com/en-us/documentation/articles/cloud-services-how-to-monitor/
65503 .*
D. _65503$
E. _65503.?$
F. _65503_
Answer: C
Explanation:
http://www.cisco.com/c/en/us/td/docs/ios/12_2/termserv/configuration/guide/ftersv_c/tcfaap re.html
NEW QUESTION: 3
An engineer has integrated a new DMVPN to link remote offices across the internet using Cisco IOS routers. When connecting to remote sites, pings and voice data appear to flow properly and all tunnel stats seem to show that are up. However, when trying to connect to a remote server using RDP, the connection fails. Which action resolves this issue?
A. Adjust the MTU size within the routers.
B. Replace certificate on the RDP server.
C. Add RDP port to the extended ACL.
D. Change DMVPN timeout values.
Answer: B
NEW QUESTION: 4
You manage a cloud service that has a web application named WebRole1.
WebRole1 writes error messages to the Windows Event Log.
Users report receiving an error page with the following message: "Event 26 has occurred.
Contact your system administrator."
You need to access the WebRole1 event log.
Which three actions should you perform? Each correct answer presents part of the solution.
A. Run the Enable-AzureWebsiteApplicationDiagnostic PowerShell cmdlet.
B. Update the cloud service definition file and the service configuration file.
C. Update the WebRole1 web.config file.
D. Enable verbose monitoring.
E. Run the Set-AzureVMDiagnosticsExtensionPowerShell cmdlet.
F. Create a storage account.
Answer: B,D,F
Explanation:
step 1 specify the scheduled TransferLogLevelFilter to Verbose in the diagnostics.wadcfg step 2 Update the cloud service definition file and the service configuration file (.cspkg) step 3 best practice is to create a separate storage account for logging diagnostics data
References: http://azure.microsoft.com/en-us/documentation/articles/cloud-services-how-to-monitor/
Proper training for 1z0-1104-25 65503 .*
D. _65503$
E. _65503.?$
F. _65503_
Answer: C
Explanation:
http://www.cisco.com/c/en/us/td/docs/ios/12_2/termserv/configuration/guide/ftersv_c/tcfaap re.html
NEW QUESTION: 3
An engineer has integrated a new DMVPN to link remote offices across the internet using Cisco IOS routers. When connecting to remote sites, pings and voice data appear to flow properly and all tunnel stats seem to show that are up. However, when trying to connect to a remote server using RDP, the connection fails. Which action resolves this issue?
A. Adjust the MTU size within the routers.
B. Replace certificate on the RDP server.
C. Add RDP port to the extended ACL.
D. Change DMVPN timeout values.
Answer: B
NEW QUESTION: 4
You manage a cloud service that has a web application named WebRole1.
WebRole1 writes error messages to the Windows Event Log.
Users report receiving an error page with the following message: "Event 26 has occurred.
Contact your system administrator."
You need to access the WebRole1 event log.
Which three actions should you perform? Each correct answer presents part of the solution.
A. Run the Enable-AzureWebsiteApplicationDiagnostic PowerShell cmdlet.
B. Update the cloud service definition file and the service configuration file.
C. Update the WebRole1 web.config file.
D. Enable verbose monitoring.
E. Run the Set-AzureVMDiagnosticsExtensionPowerShell cmdlet.
F. Create a storage account.
Answer: B,D,F
Explanation:
step 1 specify the scheduled TransferLogLevelFilter to Verbose in the diagnostics.wadcfg step 2 Update the cloud service definition file and the service configuration file (.cspkg) step 3 best practice is to create a separate storage account for logging diagnostics data
References: http://azure.microsoft.com/en-us/documentation/articles/cloud-services-how-to-monitor/
D. _65503$
E. _65503.?$
F. _65503_
Answer: C
Explanation:
http://www.cisco.com/c/en/us/td/docs/ios/12_2/termserv/configuration/guide/ftersv_c/tcfaap re.html
NEW QUESTION: 3
An engineer has integrated a new DMVPN to link remote offices across the internet using Cisco IOS routers. When connecting to remote sites, pings and voice data appear to flow properly and all tunnel stats seem to show that are up. However, when trying to connect to a remote server using RDP, the connection fails. Which action resolves this issue?
A. Adjust the MTU size within the routers.
B. Replace certificate on the RDP server.
C. Add RDP port to the extended ACL.
D. Change DMVPN timeout values.
Answer: B
NEW QUESTION: 4
You manage a cloud service that has a web application named WebRole1.
WebRole1 writes error messages to the Windows Event Log.
Users report receiving an error page with the following message: "Event 26 has occurred.
Contact your system administrator."
You need to access the WebRole1 event log.
Which three actions should you perform? Each correct answer presents part of the solution.
A. Run the Enable-AzureWebsiteApplicationDiagnostic PowerShell cmdlet.
B. Update the cloud service definition file and the service configuration file.
C. Update the WebRole1 web.config file.
D. Enable verbose monitoring.
E. Run the Set-AzureVMDiagnosticsExtensionPowerShell cmdlet.
F. Create a storage account.
Answer: B,D,F
Explanation:
step 1 specify the scheduled TransferLogLevelFilter to Verbose in the diagnostics.wadcfg step 2 Update the cloud service definition file and the service configuration file (.cspkg) step 3 best practice is to create a separate storage account for logging diagnostics data
References: http://azure.microsoft.com/en-us/documentation/articles/cloud-services-how-to-monitor/
D. _65503$
E. _65503.?$
F. _65503_
Answer: C
Explanation:
http://www.cisco.com/c/en/us/td/docs/ios/12_2/termserv/configuration/guide/ftersv_c/tcfaap re.html
NEW QUESTION: 3
An engineer has integrated a new DMVPN to link remote offices across the internet using Cisco IOS routers. When connecting to remote sites, pings and voice data appear to flow properly and all tunnel stats seem to show that are up. However, when trying to connect to a remote server using RDP, the connection fails. Which action resolves this issue?
A. Adjust the MTU size within the routers.
B. Replace certificate on the RDP server.
C. Add RDP port to the extended ACL.
D. Change DMVPN timeout values.
Answer: B
NEW QUESTION: 4
You manage a cloud service that has a web application named WebRole1.
WebRole1 writes error messages to the Windows Event Log.
Users report receiving an error page with the following message: "Event 26 has occurred.
Contact your system administrator."
You need to access the WebRole1 event log.
Which three actions should you perform? Each correct answer presents part of the solution.
A. Run the Enable-AzureWebsiteApplicationDiagnostic PowerShell cmdlet.
B. Update the cloud service definition file and the service configuration file.
C. Update the WebRole1 web.config file.
D. Enable verbose monitoring.
E. Run the Set-AzureVMDiagnosticsExtensionPowerShell cmdlet.
F. Create a storage account.
Answer: B,D,F
Explanation:
step 1 specify the scheduled TransferLogLevelFilter to Verbose in the diagnostics.wadcfg step 2 Update the cloud service definition file and the service configuration file (.cspkg) step 3 best practice is to create a separate storage account for logging diagnostics data
References: http://azure.microsoft.com/en-us/documentation/articles/cloud-services-how-to-monitor/
D. _65503$
E. _65503.?$
F. _65503_
Answer: C
Explanation:
http://www.cisco.com/c/en/us/td/docs/ios/12_2/termserv/configuration/guide/ftersv_c/tcfaap re.html
NEW QUESTION: 3
An engineer has integrated a new DMVPN to link remote offices across the internet using Cisco IOS routers. When connecting to remote sites, pings and voice data appear to flow properly and all tunnel stats seem to show that are up. However, when trying to connect to a remote server using RDP, the connection fails. Which action resolves this issue?
A. Adjust the MTU size within the routers.
B. Replace certificate on the RDP server.
C. Add RDP port to the extended ACL.
D. Change DMVPN timeout values.
Answer: B
NEW QUESTION: 4
You manage a cloud service that has a web application named WebRole1.
WebRole1 writes error messages to the Windows Event Log.
Users report receiving an error page with the following message: "Event 26 has occurred.
Contact your system administrator."
You need to access the WebRole1 event log.
Which three actions should you perform? Each correct answer presents part of the solution.
A. Run the Enable-AzureWebsiteApplicationDiagnostic PowerShell cmdlet.
B. Update the cloud service definition file and the service configuration file.
C. Update the WebRole1 web.config file.
D. Enable verbose monitoring.
E. Run the Set-AzureVMDiagnosticsExtensionPowerShell cmdlet.
F. Create a storage account.
Answer: B,D,F
Explanation:
step 1 specify the scheduled TransferLogLevelFilter to Verbose in the diagnostics.wadcfg step 2 Update the cloud service definition file and the service configuration file (.cspkg) step 3 best practice is to create a separate storage account for logging diagnostics data
References: http://azure.microsoft.com/en-us/documentation/articles/cloud-services-how-to-monitor/
D. _65503$
E. _65503.?$
F. _65503_
Answer: C
Explanation:
http://www.cisco.com/c/en/us/td/docs/ios/12_2/termserv/configuration/guide/ftersv_c/tcfaap re.html
NEW QUESTION: 3
An engineer has integrated a new DMVPN to link remote offices across the internet using Cisco IOS routers. When connecting to remote sites, pings and voice data appear to flow properly and all tunnel stats seem to show that are up. However, when trying to connect to a remote server using RDP, the connection fails. Which action resolves this issue?
A. Adjust the MTU size within the routers.
B. Replace certificate on the RDP server.
C. Add RDP port to the extended ACL.
D. Change DMVPN timeout values.
Answer: B
NEW QUESTION: 4
You manage a cloud service that has a web application named WebRole1.
WebRole1 writes error messages to the Windows Event Log.
Users report receiving an error page with the following message: "Event 26 has occurred.
Contact your system administrator."
You need to access the WebRole1 event log.
Which three actions should you perform? Each correct answer presents part of the solution.
A. Run the Enable-AzureWebsiteApplicationDiagnostic PowerShell cmdlet.
B. Update the cloud service definition file and the service configuration file.
C. Update the WebRole1 web.config file.
D. Enable verbose monitoring.
E. Run the Set-AzureVMDiagnosticsExtensionPowerShell cmdlet.
F. Create a storage account.
Answer: B,D,F
Explanation:
step 1 specify the scheduled TransferLogLevelFilter to Verbose in the diagnostics.wadcfg step 2 Update the cloud service definition file and the service configuration file (.cspkg) step 3 best practice is to create a separate storage account for logging diagnostics data
References: http://azure.microsoft.com/en-us/documentation/articles/cloud-services-how-to-monitor/
D. _65503$
E. _65503.?$
F. _65503_
Answer: C
Explanation:
http://www.cisco.com/c/en/us/td/docs/ios/12_2/termserv/configuration/guide/ftersv_c/tcfaap re.html
NEW QUESTION: 3
An engineer has integrated a new DMVPN to link remote offices across the internet using Cisco IOS routers. When connecting to remote sites, pings and voice data appear to flow properly and all tunnel stats seem to show that are up. However, when trying to connect to a remote server using RDP, the connection fails. Which action resolves this issue?
A. Adjust the MTU size within the routers.
B. Replace certificate on the RDP server.
C. Add RDP port to the extended ACL.
D. Change DMVPN timeout values.
Answer: B
NEW QUESTION: 4
You manage a cloud service that has a web application named WebRole1.
WebRole1 writes error messages to the Windows Event Log.
Users report receiving an error page with the following message: "Event 26 has occurred.
Contact your system administrator."
You need to access the WebRole1 event log.
Which three actions should you perform? Each correct answer presents part of the solution.
A. Run the Enable-AzureWebsiteApplicationDiagnostic PowerShell cmdlet.
B. Update the cloud service definition file and the service configuration file.
C. Update the WebRole1 web.config file.
D. Enable verbose monitoring.
E. Run the Set-AzureVMDiagnosticsExtensionPowerShell cmdlet.
F. Create a storage account.
Answer: B,D,F
Explanation:
step 1 specify the scheduled TransferLogLevelFilter to Verbose in the diagnostics.wadcfg step 2 Update the cloud service definition file and the service configuration file (.cspkg) step 3 best practice is to create a separate storage account for logging diagnostics data
References: http://azure.microsoft.com/en-us/documentation/articles/cloud-services-how-to-monitor/
D. _65503$
E. _65503.?$
F. _65503_
Answer: C
Explanation:
http://www.cisco.com/c/en/us/td/docs/ios/12_2/termserv/configuration/guide/ftersv_c/tcfaap re.html
NEW QUESTION: 3
An engineer has integrated a new DMVPN to link remote offices across the internet using Cisco IOS routers. When connecting to remote sites, pings and voice data appear to flow properly and all tunnel stats seem to show that are up. However, when trying to connect to a remote server using RDP, the connection fails. Which action resolves this issue?
A. Adjust the MTU size within the routers.
B. Replace certificate on the RDP server.
C. Add RDP port to the extended ACL.
D. Change DMVPN timeout values.
Answer: B
NEW QUESTION: 4
You manage a cloud service that has a web application named WebRole1.
WebRole1 writes error messages to the Windows Event Log.
Users report receiving an error page with the following message: "Event 26 has occurred.
Contact your system administrator."
You need to access the WebRole1 event log.
Which three actions should you perform? Each correct answer presents part of the solution.
A. Run the Enable-AzureWebsiteApplicationDiagnostic PowerShell cmdlet.
B. Update the cloud service definition file and the service configuration file.
C. Update the WebRole1 web.config file.
D. Enable verbose monitoring.
E. Run the Set-AzureVMDiagnosticsExtensionPowerShell cmdlet.
F. Create a storage account.
Answer: B,D,F
Explanation:
step 1 specify the scheduled TransferLogLevelFilter to Verbose in the diagnostics.wadcfg step 2 Update the cloud service definition file and the service configuration file (.cspkg) step 3 best practice is to create a separate storage account for logging diagnostics data
References: http://azure.microsoft.com/en-us/documentation/articles/cloud-services-how-to-monitor/
Don't settle for sideline 1z0-1104-25 65503 .*
D. _65503$
E. _65503.?$
F. _65503_
Answer: C
Explanation:
http://www.cisco.com/c/en/us/td/docs/ios/12_2/termserv/configuration/guide/ftersv_c/tcfaap re.html
NEW QUESTION: 3
An engineer has integrated a new DMVPN to link remote offices across the internet using Cisco IOS routers. When connecting to remote sites, pings and voice data appear to flow properly and all tunnel stats seem to show that are up. However, when trying to connect to a remote server using RDP, the connection fails. Which action resolves this issue?
A. Adjust the MTU size within the routers.
B. Replace certificate on the RDP server.
C. Add RDP port to the extended ACL.
D. Change DMVPN timeout values.
Answer: B
NEW QUESTION: 4
You manage a cloud service that has a web application named WebRole1.
WebRole1 writes error messages to the Windows Event Log.
Users report receiving an error page with the following message: "Event 26 has occurred.
Contact your system administrator."
You need to access the WebRole1 event log.
Which three actions should you perform? Each correct answer presents part of the solution.
A. Run the Enable-AzureWebsiteApplicationDiagnostic PowerShell cmdlet.
B. Update the cloud service definition file and the service configuration file.
C. Update the WebRole1 web.config file.
D. Enable verbose monitoring.
E. Run the Set-AzureVMDiagnosticsExtensionPowerShell cmdlet.
F. Create a storage account.
Answer: B,D,F
Explanation:
step 1 specify the scheduled TransferLogLevelFilter to Verbose in the diagnostics.wadcfg step 2 Update the cloud service definition file and the service configuration file (.cspkg) step 3 best practice is to create a separate storage account for logging diagnostics data
References: http://azure.microsoft.com/en-us/documentation/articles/cloud-services-how-to-monitor/
D. _65503$
E. _65503.?$
F. _65503_
Answer: C
Explanation:
http://www.cisco.com/c/en/us/td/docs/ios/12_2/termserv/configuration/guide/ftersv_c/tcfaap re.html
NEW QUESTION: 3
An engineer has integrated a new DMVPN to link remote offices across the internet using Cisco IOS routers. When connecting to remote sites, pings and voice data appear to flow properly and all tunnel stats seem to show that are up. However, when trying to connect to a remote server using RDP, the connection fails. Which action resolves this issue?
A. Adjust the MTU size within the routers.
B. Replace certificate on the RDP server.
C. Add RDP port to the extended ACL.
D. Change DMVPN timeout values.
Answer: B
NEW QUESTION: 4
You manage a cloud service that has a web application named WebRole1.
WebRole1 writes error messages to the Windows Event Log.
Users report receiving an error page with the following message: "Event 26 has occurred.
Contact your system administrator."
You need to access the WebRole1 event log.
Which three actions should you perform? Each correct answer presents part of the solution.
A. Run the Enable-AzureWebsiteApplicationDiagnostic PowerShell cmdlet.
B. Update the cloud service definition file and the service configuration file.
C. Update the WebRole1 web.config file.
D. Enable verbose monitoring.
E. Run the Set-AzureVMDiagnosticsExtensionPowerShell cmdlet.
F. Create a storage account.
Answer: B,D,F
Explanation:
step 1 specify the scheduled TransferLogLevelFilter to Verbose in the diagnostics.wadcfg step 2 Update the cloud service definition file and the service configuration file (.cspkg) step 3 best practice is to create a separate storage account for logging diagnostics data
References: http://azure.microsoft.com/en-us/documentation/articles/cloud-services-how-to-monitor/
D. _65503$
E. _65503.?$
F. _65503_
Answer: C
Explanation:
http://www.cisco.com/c/en/us/td/docs/ios/12_2/termserv/configuration/guide/ftersv_c/tcfaap re.html
NEW QUESTION: 3
An engineer has integrated a new DMVPN to link remote offices across the internet using Cisco IOS routers. When connecting to remote sites, pings and voice data appear to flow properly and all tunnel stats seem to show that are up. However, when trying to connect to a remote server using RDP, the connection fails. Which action resolves this issue?
A. Adjust the MTU size within the routers.
B. Replace certificate on the RDP server.
C. Add RDP port to the extended ACL.
D. Change DMVPN timeout values.
Answer: B
NEW QUESTION: 4
You manage a cloud service that has a web application named WebRole1.
WebRole1 writes error messages to the Windows Event Log.
Users report receiving an error page with the following message: "Event 26 has occurred.
Contact your system administrator."
You need to access the WebRole1 event log.
Which three actions should you perform? Each correct answer presents part of the solution.
A. Run the Enable-AzureWebsiteApplicationDiagnostic PowerShell cmdlet.
B. Update the cloud service definition file and the service configuration file.
C. Update the WebRole1 web.config file.
D. Enable verbose monitoring.
E. Run the Set-AzureVMDiagnosticsExtensionPowerShell cmdlet.
F. Create a storage account.
Answer: B,D,F
Explanation:
step 1 specify the scheduled TransferLogLevelFilter to Verbose in the diagnostics.wadcfg step 2 Update the cloud service definition file and the service configuration file (.cspkg) step 3 best practice is to create a separate storage account for logging diagnostics data
References: http://azure.microsoft.com/en-us/documentation/articles/cloud-services-how-to-monitor/
D. _65503$
E. _65503.?$
F. _65503_
Answer: C
Explanation:
http://www.cisco.com/c/en/us/td/docs/ios/12_2/termserv/configuration/guide/ftersv_c/tcfaap re.html
NEW QUESTION: 3
An engineer has integrated a new DMVPN to link remote offices across the internet using Cisco IOS routers. When connecting to remote sites, pings and voice data appear to flow properly and all tunnel stats seem to show that are up. However, when trying to connect to a remote server using RDP, the connection fails. Which action resolves this issue?
A. Adjust the MTU size within the routers.
B. Replace certificate on the RDP server.
C. Add RDP port to the extended ACL.
D. Change DMVPN timeout values.
Answer: B
NEW QUESTION: 4
You manage a cloud service that has a web application named WebRole1.
WebRole1 writes error messages to the Windows Event Log.
Users report receiving an error page with the following message: "Event 26 has occurred.
Contact your system administrator."
You need to access the WebRole1 event log.
Which three actions should you perform? Each correct answer presents part of the solution.
A. Run the Enable-AzureWebsiteApplicationDiagnostic PowerShell cmdlet.
B. Update the cloud service definition file and the service configuration file.
C. Update the WebRole1 web.config file.
D. Enable verbose monitoring.
E. Run the Set-AzureVMDiagnosticsExtensionPowerShell cmdlet.
F. Create a storage account.
Answer: B,D,F
Explanation:
step 1 specify the scheduled TransferLogLevelFilter to Verbose in the diagnostics.wadcfg step 2 Update the cloud service definition file and the service configuration file (.cspkg) step 3 best practice is to create a separate storage account for logging diagnostics data
References: http://azure.microsoft.com/en-us/documentation/articles/cloud-services-how-to-monitor/
D. _65503$
E. _65503.?$
F. _65503_
Answer: C
Explanation:
http://www.cisco.com/c/en/us/td/docs/ios/12_2/termserv/configuration/guide/ftersv_c/tcfaap re.html
NEW QUESTION: 3
An engineer has integrated a new DMVPN to link remote offices across the internet using Cisco IOS routers. When connecting to remote sites, pings and voice data appear to flow properly and all tunnel stats seem to show that are up. However, when trying to connect to a remote server using RDP, the connection fails. Which action resolves this issue?
A. Adjust the MTU size within the routers.
B. Replace certificate on the RDP server.
C. Add RDP port to the extended ACL.
D. Change DMVPN timeout values.
Answer: B
NEW QUESTION: 4
You manage a cloud service that has a web application named WebRole1.
WebRole1 writes error messages to the Windows Event Log.
Users report receiving an error page with the following message: "Event 26 has occurred.
Contact your system administrator."
You need to access the WebRole1 event log.
Which three actions should you perform? Each correct answer presents part of the solution.
A. Run the Enable-AzureWebsiteApplicationDiagnostic PowerShell cmdlet.
B. Update the cloud service definition file and the service configuration file.
C. Update the WebRole1 web.config file.
D. Enable verbose monitoring.
E. Run the Set-AzureVMDiagnosticsExtensionPowerShell cmdlet.
F. Create a storage account.
Answer: B,D,F
Explanation:
step 1 specify the scheduled TransferLogLevelFilter to Verbose in the diagnostics.wadcfg step 2 Update the cloud service definition file and the service configuration file (.cspkg) step 3 best practice is to create a separate storage account for logging diagnostics data
References: http://azure.microsoft.com/en-us/documentation/articles/cloud-services-how-to-monitor/
